BDC's in support object
Hi guys,
do we work on BDC's in a support project....
if we... in which way we are working on them.
plz give exact reason to my question?
regards
venu
Hi Lokesh Reddy,
Ofcourse you can create more than 1 BDC in a single program
I have myself created 4 BDCs in single program.
Just remember to call the Transactions in correct order and also loop them properly, at times wrong looping messes up the BDC.
If you feel all transactions calling in 1 loop are confusing you, then u can club 2 transactions in 1 loop.
so that your 1st loop executes 2 transactions, once that loop is successfully over, the control moves onto the next loop, with same or different transactions. Dont worry the same data will be used by both the loops, as it'll be looping on the same internal table.
If your BDCs are not using same data, some are using 1st few columns, some the rest one
at such times wat u can do is take all data from flat file into 1 internal table and then individually move particular columns to another internal table.
then the BDCs that require data from 1st internal table, so loop at that internal table
the ones which need data from another internal table, so loop at the other internal table.
Please note as many recordings / BDCs u call those many number of time u have to write the statement.
CALL TRANSACTION.....
Like I wrote 4 BDCs in single program, I had to write CALL TRANSACTION 4 times.
Once u finish everything...put a break point and debug the whole program, u'll actually get to see the flow in which ur data is read, used by bdc, enters the data, how the control moves from 1 BDC to another, how the control goes from 1 LOOP to another, etc.
debug it in foreground 1st mode 'A', once u feel its going fine, then change it to background mode 'N'.
I hope this would help u All The Best.
Regards,
RadhikaS
Similar Messages
-
Error when installing the supporting objects of OLL Packaged Application
Hello,
I am trying to install OLL Packaged Application|http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r41/inst_pkgapp/inst_pkgapp.htm#top
but when installing the supporting objects, I got error when executing the code of "create_package_body"
Error at line 274: PLS-00201: identifier 'UTL_TCP' must be declared
create or replace package body eba_oll_log
as
g_start_time number;
procedure log_init
is
begin
g_start_time := dbms_utility.get_time;
end log_init;
procedure log_page_view
is
begin
insert into eba_oll_page_views
( APEX_USER,
PAGE_ID,
PAGE_NAME,
VIEW_DATE,
TS,
ELAPSED_TIME,
IP_ADDRESS,
AGENT,
APEX_SESSION_ID,
CONTENT_ID,
CONTENT_TITLE )
values
( v('APP_USER'),
v('APP_PAGE_ID'),
wwv_flow.g_step_title,
trunc(sysdate,'DD'),
systimestamp,
(dbms_utility.get_time-g_start_time)*(.01),
owa_util.get_cgi_env('REMOTE_ADDR'),
owa_util.get_cgi_env('HTTP_USER_AGENT'),
v('APP_SESSION'),
case when v('APP_PAGE_ID') = 24
then v('P24_CONTENT_ID')
else null
end,
case when v('APP_PAGE_ID') = 24
then v('P24_CONTENT_TITLE')
else null
end );
if v('APP_PAGE_ID') = 24 then
insert into eba_oll_content_views
( APEX_USER,
VIEW_DATE,
TS,
IP_ADDRESS,
AGENT,
APEX_SESSION_ID,
CONTENT_ID,
CONTENT_TITLE,
NOTE )
values
( v('APP_USER'),
trunc(sysdate,'DD'),
systimestamp,
owa_util.get_cgi_env('REMOTE_ADDR'),
owa_util.get_cgi_env('HTTP_USER_AGENT'),
v('APP_SESSION'),
v('P24_CONTENT_ID'),
v('P24_CONTENT_TITLE'),
'Viewed' );
end if;
commit;
end log_page_view;
procedure log_content_click
is
begin
insert into eba_oll_content_views
( APEX_USER,
VIEW_DATE,
TS,
IP_ADDRESS,
AGENT,
APEX_SESSION_ID,
CONTENT_ID,
CONTENT_TITLE,
NOTE )
values
( v('APP_USER'),
trunc(sysdate,'DD'),
systimestamp,
owa_util.get_cgi_env('REMOTE_ADDR'),
owa_util.get_cgi_env('HTTP_USER_AGENT'),
v('APP_SESSION'),
v('P24_CONTENT_ID'),
v('P24_CONTENT_TITLE'),
'Launched' );
commit;
end log_content_click;
end eba_oll_log;
create or replace package body eba_oll_api
as
function gen_id
return number
is
l_id number;
begin
select to_number(sys_guid(), 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX')
into l_id
from dual;
return l_id;
end gen_id;
function eba_oll_tags_cleaner (
p_tags in varchar2,
p_case in varchar2 default 'U' ) return varchar2
is
type tags is table of varchar2(255) index by varchar2(255);
l_tags_a tags;
l_tag varchar2(255);
l_tags apex_application_global.vc_arr2;
l_tags_string varchar2(32767);
i integer;
begin
l_tags := apex_util.string_to_table(p_tags,',');
for i in 1..l_tags.count loop
--remove all whitespace, including tabs, spaces, line feeds and carraige returns with a single space
l_tag := substr(trim(regexp_replace(l_tags(i),'[[:space:]]{1,}',' ')),1,255);
if l_tag is not null and l_tag != ' ' then
if p_case = 'U' then
l_tag := upper(l_tag);
elsif p_case = 'L' then
l_tag := lower(l_tag);
end if;
--add it to the associative array, if it is a duplicate, it will just be replaced
l_tags_a(l_tag) := l_tag;
end if;
end loop;
l_tag := null;
l_tag := l_tags_a.first;
while l_tag is not null loop
l_tags_string := l_tags_string||l_tag;
if l_tag != l_tags_a.last then
l_tags_string := l_tags_string||', ';
end if;
l_tag := l_tags_a.next(l_tag);
end loop;
return substr(l_tags_string,1,4000);
end eba_oll_tags_cleaner;
procedure eba_oll_tag_sync (
p_new_tags in varchar2,
p_old_tags in varchar2,
p_content_type in varchar2,
p_content_id in number )
as
type tags is table of varchar2(255) index by varchar2(255);
l_new_tags_a tags;
l_old_tags_a tags;
l_new_tags apex_application_global.vc_arr2;
l_old_tags apex_application_global.vc_arr2;
l_merge_tags apex_application_global.vc_arr2;
l_dummy_tag varchar2(255);
i integer;
begin
l_old_tags := apex_util.string_to_table(p_old_tags,', ');
l_new_tags := apex_util.string_to_table(p_new_tags,', ');
if l_old_tags.count > 0 then --do inserts and deletes
--build the associative arrays
for i in 1..l_old_tags.count loop
l_old_tags_a(l_old_tags(i)) := l_old_tags(i);
end loop;
for i in 1..l_new_tags.count loop
l_new_tags_a(l_new_tags(i)) := l_new_tags(i);
end loop;
--do the inserts
for i in 1..l_new_tags.count loop
begin
l_dummy_tag := l_old_tags_a(l_new_tags(i));
exception when no_data_found then
insert into eba_oll_tags (tag, content_id, content_type )
values (l_new_tags(i), p_content_id, p_content_type );
l_merge_tags(l_merge_tags.count + 1) := l_new_tags(i);
end;
end loop;
--do the deletes
for i in 1..l_old_tags.count loop
begin
l_dummy_tag := l_new_tags_a(l_old_tags(i));
exception when no_data_found then
delete from eba_oll_tags where content_id = p_content_id and tag = l_old_tags(i);
l_merge_tags(l_merge_tags.count + 1) := l_old_tags(i);
end;
end loop;
else --just do inserts
for i in 1..l_new_tags.count loop
insert into eba_oll_tags (tag, content_id, content_type )
values (l_new_tags(i), p_content_id, p_content_type );
l_merge_tags(l_merge_tags.count + 1) := l_new_tags(i);
end loop;
end if;
for i in 1..l_merge_tags.count loop
merge into eba_oll_tags_type_sum s
using (select count(*) tag_count
from eba_oll_tags
where tag = l_merge_tags(i) and content_type = p_content_type ) t
on (s.tag = l_merge_tags(i) and s.content_type = p_content_type )
when not matched then insert (tag, content_type, tag_count)
values (l_merge_tags(i), p_content_type, t.tag_count)
when matched then update set s.tag_count = t.tag_count;
merge into eba_oll_tags_sum s
using (select sum(tag_count) tag_count
from eba_oll_tags_type_sum
where tag = l_merge_tags(i) ) t
on (s.tag = l_merge_tags(i) )
when not matched then insert (tag, tag_count)
values (l_merge_tags(i), t.tag_count)
when matched then update set s.tag_count = t.tag_count;
end loop;
end eba_oll_tag_sync;
procedure render_tag_cloud (
p_selection in varchar2 default null,
p_app_id in number,
p_session_id in number,
p_min_nbr_tags in number default 1,
p_max in number default 100,
p_limit in number default 10000,
p_link_to_page in varchar2 default '2',
p_tag_item_filter in varchar2 default 'P2_TAGS',
p_clear_cache in varchar2 default '2,CIR,RIR',
p_more_page in varchar2 default '62' )
as
l_printed_records number := 0;
l_available_records number := 20;
l_max number;
l_min number;
l_class_size number;
l_class varchar2(30);
type l_tagtype is table of varchar2(2000);
l_tags l_tagtype;
type l_numtype is table of number;
l_cnts l_numtype;
l_size number;
l_total number :=0;
l_buffer varchar2(32676);
CURSOR c_all_tags
IS
select tag, c from (
select t.tag, count(*) c
from eba_oll_content c,
eba_oll_tags t
where c.content_id = t.content_id
and c.display_yn = 'Y'
and (p_selection is null or
(p_selection is not null and
( (substr(p_selection,1,1) = 'R' and
substr(p_selection,2) in (select release_id
from eba_oll_content_products cp
where cp.content_id = c.content_id))
or (substr(p_selection,1,1) = 'C' and
substr(p_selection,2) in (select product_id
from eba_oll_content_products cp
where cp.content_id = c.content_id))
or (substr(p_selection,1,1) = 'P' and
(substr(p_selection,2) in (select product_id
from eba_oll_content_products cp
where cp.content_id = c.content_id) or
substr(p_selection,2) in (select p.parent_product_id
from eba_oll_content_products cp,
eba_oll_products p
where cp.content_id = c.content_id
and cp.product_id = p.product_id)))
or (substr(p_selection,1,1) = 'G' and
(substr(p_selection,2) in (select pg.group_id
from eba_oll_product_groupings pg,
eba_oll_content_products cp
where pg.product_id = cp.product_id
and cp.content_id = c.content_id) or
substr(p_selection,2) in (select pg.group_id
from eba_oll_product_groupings pg,
eba_oll_products p,
eba_oll_content_products cp
where pg.product_id = p.parent_product_id
and p.product_id = cp.product_id
and cp.content_id = c.content_id)))
group by tag
) x where rownum < p_limit
and c >= p_min_nbr_tags
order by upper(tag) ;
begin
-- Fetch tags into arrays
open c_all_tags;
loop
fetch c_all_tags bulk collect into l_tags,l_cnts limit p_limit;
exit;
end loop;
close c_all_tags;
l_available_records := l_tags.count;
-- Determine total count and maximum tag counts
l_max := 0;
l_min := 1000;
FOR i in l_cnts.first..l_cnts.last loop
l_total := l_total + l_cnts(i);
if l_cnts(i) > l_max then
l_max := l_cnts(i);
end if;
if l_cnts(i) < l_min then
l_min := l_cnts(i);
end if;
end loop;
if l_max = 0 then l_max := 1; end if;
l_class_size := round((l_max-l_min)/6);
-- Generate tag cloud --
sys.htp.prn('<div class="tagCloud"><ul>');
for i in l_tags.first..l_tags.last loop
l_printed_records := l_printed_records + 1;
if l_cnts(i) < l_min + l_class_size then
l_class := 'size1';
elsif l_cnts(i) < l_min + (l_class_size*2) then
l_class := 'size2';
elsif l_cnts(i) < l_min + (l_class_size*3) then
l_class := 'size3';
elsif l_cnts(i) < l_min + (l_class_size*4) then
l_class := 'size4';
elsif l_cnts(i) < l_min + (l_class_size*5) then
l_class := 'size5';
else l_class := 'size6';
end if;
l_buffer := '<li><a class="'||l_class||'" href="'||
'f?p='||p_app_id||':'||p_link_to_page||':'||p_session_id||':::'||p_clear_cache||':'||
p_tag_item_filter||':'||htf.escape_sc(l_tags(i))||'">'||
htf.escape_sc(l_tags(i)) || '<span>' || l_cnts(i) || '</span></a></li>';
sys.htp.prn(l_buffer);
l_buffer := '';
if l_printed_records > p_max then
exit;
end if;
end loop;
sys.htp.prn('</ul></div>');
-- print if there's more
if l_tags.count - l_printed_records != 0 then
htp.prn('<p><a href="f?p='||p_app_id||':'||htf.escape_sc(p_more_page)||
':'||p_session_id||':::'||htf.escape_sc(p_more_page)||'">View all tags</a></p>');
end if;
exception when others then
sys.htp.prn('<p>No tags found.</p>');
end render_tag_cloud;
procedure email_when_feedback (
p_feedback_id in number,
p_host_url in varchar2,
p_app_id in number )
is
l_body clob;
l_body_html clob;
begin
for c1 in (
select f.feedback_comment, f.feedback_by,
c.title, nvl(ct.feedback_contacts,'[email protected]') email
from eba_oll_content_feedback f,
eba_oll_content c,
eba_oll_team ct
where f.id = p_feedback_id
and f.content_id = c.content_id
and c.team_id = ct.team_id (+) )
loop
l_body := 'You have received feedback for a piece of content you own in the Oracle Learning Library (OLL) Application.
Content: '|| c1.title || utl_tcp.crlf || '
Feedback: '|| c1.feedback_comment || utl_tcp.crlf || '
Left by: '|| lower(c1.feedback_by) ||'
You can respond via the OLL Application, '||p_host_url||'f?p='||p_app_id||':47:::NO::P47_ID:' || p_feedback_id || '.';
l_body_html := '<div style="border: 1px solid #DDD; background-color: #F8F8F8; width: 460px; margin: 0 auto; -moz-border-radius: 10px; -webkit-border-radius: 10px; padding: 20px;">
<p style="font: bold 12px/16px Arial, sans-serif; margin: 0 0 10px 0; padding: 0;">
You have received feedback for a piece of content you own in the Oracle Learning Library (OLL) Application.
</p>
<table style="width: 100%;" cellspacing="0" cellpadding="0" border="0">
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Content</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;"><a href="#" style="color: #000">'||c1.title||'</a></td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Feedback</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.feedback_comment,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Left by</td>
<td style="font: bold 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||lower(c1.feedback_by)||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td colspan="2" style="text-align: center; font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">
<a href="'||p_host_url||'f?p='||p_app_id||':47:::NO::P47_ID:' || p_feedback_id ||'" style="display: block; padding: 10px; background-color: #EEE; font: bold 16px/16px Arial, sans-serif; color: #444">Respond to this Feedback</a>
</td>
</tr>
</table>
</div>';
apex_mail.send (
p_to => c1.email,
p_from => '[email protected]',
p_subj => 'OLL - New Feedback for your team',
p_body => l_body,
p_body_html => l_body_html );
end loop;
end email_when_feedback;
procedure email_when_response (
p_feedback_id in number,
p_host_url in varchar2,
p_app_id in number )
is
l_body clob;
l_body_html clob;
begin
for c1 in (
select f.feedback_comment, f.feedback_by, f.response, c.title
from eba_oll_content_feedback f,
eba_oll_content c
where f.id = p_feedback_id
and f.content_id = c.content_id )
loop
l_body := 'You have received a response to your feedback left in the Oracle Learning Library (OLL) Application.
Content: '|| c1.title || '
Feedback: '|| c1.feedback_comment || '
Response: '|| c1.response || '
You can also view this response via the OLL Application, '||p_host_url||'f?p='||p_app_id||':60:::NO::IR_ID:' || p_feedback_id || '.';
l_body_html := '<div style="border: 1px solid #DDD; background-color: #F8F8F8; width: 460px; margin: 0 auto; -moz-border-radius: 10px; -webkit-border-radius: 10px; padding: 20px;">
<p style="font: bold 12px/16px Arial, sans-serif; margin: 0 0 10px 0; padding: 0;">
You have received a response to your feedback left in the Oracle Learning Library (OLL) Application.
</p>
<table style="width: 100%;" cellspacing="0" cellpadding="0" border="0">
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Content</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;"><a href="#" style="color: #000">'||c1.title||'</a></td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Feedback</td>
<td style="font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.feedback_comment,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td style="font: bold 12px/16px Arial, sans-serif; color: #666; padding: 0 10px 10px 0; vertical-align: top;">Response</td>
<td style="font: bold 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">'||replace(c1.response,CHR(10),'<br/>')||'</td>
</tr>
<tr>' || utl_tcp.crlf || '
<td colspan="2" style="text-align: center; font: normal 12px/16px Arial, sans-serif; padding: 0 10px 10px 0; vertical-align: top;">
<a href="'||p_host_url||'f?p='||p_app_id||':60:::NO::IR_ID:' || p_feedback_id ||'" style="display: block; padding: 10px; background-color: #EEE; font: bold 16px/16px Arial, sans-serif; color: #444">View Response in OLL Application</a>
</td>
</tr>
</table>
</div>';
apex_mail.send (
p_to => c1.feedback_by,
p_from => '[email protected]',
p_subj => 'Oracle Learning Library - Response to your Feedback',
p_body => l_body,
p_body_html => l_body_html );
end loop;
end email_when_response;
end eba_oll_api;
/Error at line 274: PLS-00201: identifier 'UTL_TCP' must be declared
Edited by: Fateh on Jan 13, 2012 7:32 AMThanks & Sorry for not mentioning the full information about my environment.
it was:
Oracle 11g xe R2 on Windows 7 machine
Apex listener deployed on Glass Fish server 3.1 on Windows 7 machine
Apex 4.1
Google Chrome
So, to have OLL application worked locally . we need the following:
grant execute on utl_tcp to [your_schema_name]And to
Configure an Application Express Application as a Partner Application in Oracle AS Single Sign-On http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html.
I think I am going to install on my work space on apex.oracle.com.
Regards,
Fateh
Edited by: Fateh on Jan 15, 2012 9:38 AM -
Xdb_installation_trigger does not support object creation of type SNAPSHOT
hi everyone, i'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit on solaris sparc 5.10
we like to send an email through SSL, and after searching here and there I found out that oracle DB 11g able to go throught the SSL.
since upgrade our DB to 11g would not be an option, so i tried to export XDB of 11g and import it into XDB 10gR2 schema, it was a mess...
then i just reinstall XDB using catnoqm.sql & catqm.sql
and now one of our programmer cant run some script like above
CREATE MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY
TABLESPACE MARKETING_TABLES
PCTUSED 40
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
+)+
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
+/* Formatted on 9/23/2010 1:07:42 PM (QP5 v5.114.809.3010) */+
SELECT coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date,
SUM (scheme_adm) scheme_adm,
SUM (appl_unit) appl_unit,
SYSDATE mkt_sysdate
FROM (SELECT NVL (a.coy_id, '01') coy_id,
a.branch_id appl_branch_id,
DECODE (a.buss_unit, 'NMC', '2101', 'UMC', '2102', '2352')
appl_object_code,
a.platform product_type,
TRUNC (c.contract_active_date) ppdcf_paid_date,
NVL (s.ms_amt, 0) scheme_adm,
NVL (o.total_item, 0) appl_unit
FROM ordmgmt.om_trn_appl_ms_lvl_object s,
ordmgmt.om_trn_appl_hdr a,
acctmgmt.ar_trn_sum_contracts c,
+( SELECT appl_no, COUNT ( * ) total_item+
FROM ordmgmt.om_trn_appl_object
GROUP BY appl_no) o
WHERE s.appl_no = a.appl_no
AND a.appl_no = o.appl_no
AND s.ms_code IN ('MS03', 'MS14')
AND c.appl_no = a.appl_no
AND c.contract_no = a.contract_no
+/*AND c.office_code = a.branch_id*/+
AND NVL (a.coy_id, '01') = NVL (c.coy_id, '01'))
GROUP BY coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date;
COMMENT ON MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY IS 'snapshot table for snapshot MARKETING.FIFSYS_MKT_SCHEME_MV_COY';
and this error shown:
ORA-00604 error occurred at recursive SQL level 1
ORA-20000 Trigger xdb_installation_trigger does not support object creation of type SNAPSHOT
ORA-06512 at line 32
maybe some of you know how to solve this problem??
and, this in the script of the xdb_installation_trigger
DROP TRIGGER SYS.XDB_INSTALLATION_TRIGGER;
CREATE OR REPLACE TRIGGER SYS.xdb_installation_trigger
BEFORE
CREATE ON DATABASE
DECLARE
sql_text varchar2(200);
val number;
BEGIN
if (dictionary_obj_owner != 'XDB') then
if (dictionary_obj_type = 'FUNCTION' or
dictionary_obj_type = 'INDEX' or
dictionary_obj_type = 'PACKAGE' or
dictionary_obj_type = 'PACKAGE BODY' or
dictionary_obj_type = 'PROCEDURE' or
dictionary_obj_type = 'SYNONYM' or
dictionary_obj_type = 'TABLE' or
dictionary_obj_type = 'TABLESPACE' or
dictionary_obj_type = 'TYPE' or
dictionary_obj_type = 'VIEW' or
dictionary_obj_type = 'USER'
+)then+
if (dictionary_obj_type != 'PACKAGE BODY'
+) then+
sql_text := 'select count(*) from ALL_OBJECTS where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
sql_text := 'select count(*) from dropped_xdb_instll_tab where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
insert into xdb_installation_tab values
+(dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type);+
end if;
end if;
end if;
else
raise_application_error(-20000, 'Trigger xdb_installation_trigger does not support object creation of type '||dictionary_obj_type);
end if;
end if;
end;
+/+
/********************************************************************************/i'm so careless, after checking a fresh installation of the same version DB, i dont found xdb_installation_trigger.
so just by simply remove that trigger & everything works just fine. :) -
The extraction program does not support object 0MAT_PLANT
Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence -
The extraction program does not support object 0JOB_ATTR
HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data". -
Remove supporting object in Deinstallation Script
Hello.
I want to define a deinstallation script for my application. It should remove all created database objects and the supporting objects.
I can remove the database objects with SQL statements. But what is the command to remove supporting objects?
Maybe you can give me an example to remove an icon called delete.gif. (I think static items and images are handled in the same way, aren't they?)
Thank you very much.
Stephanbegin
wwv_flow_api.create_or_remove_file(
p_location => 'WORKSPACE',
p_name => 'image.gif',
p_mode => 'REMOVE',
p_type => 'STATIC');
end; -
Just update to Pages 5.1 - its dropped the pictures from my old Pages files - 'Some features aren't supported - objects in table cells were removed' - how do I get the pictures back?
Thanks Peter
Can you just walk me through dumping Pages 5 and getting to the Applications/iWork folder - and does this mean that when I see future Pages Upgrades I should block them?
I'm new to Apple so need a step by step
Many thanks
Glyptic -
From which version JVM starts supporting Object bindings in collections.
from which version JVM starts supporting Object bindings in collections.
private ArrayList<String> arr = new ArrayList();
this will bind String objects to arr, nothing else will be stored.
which version of JVM should I confirm, before using this feature!!!
please comment.thanks MLRon!!!
They are called "generics", not "bindings". In any case, you need Java 1.5 (also known as Java 5.0).Can generics be used anywhere, or only with collections.
for eg:-
public class Abc {
public Abc(Object obj) {
if(obj instanceOf String)
doSomething;
if(Obj instanceOf Xyz)
doSomething;
while creating Abc instance can I use this:-
Abc<String> abc = new Abc("abc");
and could we also do this:-
Abc<String[]> abc = new Abc(new String[5]);
and what exception does generics generate, if we don't obey them.
for eg:-
Abc<String> abc = null;
abc=new Abc(new Xyz);
and should generics code be kept in try catch block!!!
please guide me!!! -
HP UFT 12.02 does not support .object property for most of the objects in Chrome
Hi ,
Chrome Version : 39
UFT Version : 12.02
Does not support .object property for WebTable,webList and So on.
It actually shows the native property in Object spy but when programatically we try to work on it, its unable to find the object.
I Know that for Browser Object .object property is not supported.
Regards,
Ashfaq DhanakwalaYou want the HP Enterprise Business Community and look in the Discussion Boards.
Its the Forum for all things related to professional products like Servers, NAS, Procurve, ALM, etc etc.
UFT was formerly known as QTP...
Functional Testing/QTP - HP Enterprise Business Community
Hope it helps. -
Unable to install supporting objects(custom CSS/Images) through SQL
4.2.1
Hi there,
we have a Apex app which uses custom CSS/images loaded into shared objects CSS and image folders respectively. I followed the steps
http://nerd.net.au/29-apex-application-express/general-application/122-include-images-with-supporting-objects-on-apex-export-import
Now, this works fine when we manually import the application through application builder, it "prompts" if we want to install supporting objects, when yes is selected, everything gets installed.
MY problem is we have an automated patching process where the .sql application file gets installed but the supporting objects are not. So I tried bundling the supporting object as a separate .sql file but got an error
Testing options PL/SQL procedure successfully completed. declare * ERROR at line 1: ORA-20001: Package variable g_security_group_id must be set. ORA-06512: at "APEX_040200.WWV_FLOW_IMAGE_API", line 11 ORA-06512: at "APEX_040200.WWV_FLOW_IMAGE_API", line 31 ORA-06512: at
The supporting object is a button. Do I need to set the application id or security group id or something else?
begin
wwv_flow_api.g_varchar2_table := wwv_flow_api.empty_varchar2_table;
wwv_flow_api.g_varchar2_table(1) := '89504E470D0A1A0A0000000D494844520000009600000051080600000030EC5FEE000000097048597300000B1300000B1301009A9C1800000A4D6943435050686F746F73686F70204943432070726F66696C65000078DA9D53775893F7163EDFF7650F56';
wwv_flow_api.g_varchar2_table(2) := '42D8F0B1976C81002223AC08C81059A21092006184101240C585880A561415119C4855C482D50A489D88E2A028B867418A885A8B555C38EE1FDCA7B57D7AEFEDEDFBD7FBBCE79CE7FCCE79CF0F8011122691E6A26A003952853C3AD81F8F4F48C4C9BD80';
wwv_flow_api.g_varchar2_table(3) := '021548E0042010E6CBC26705C50000F00379787E74B03FFC01AF6F00020070D52E2412C7E1FF83BA50265700209100E02212E70B01905200C82E54C81400C81800B053B3640A009400006C797C422200AA0D00ECF4493E0500D8A993DC1700D8A21CA908';
wwv_flow_api.g_varchar2_table(4) := '008D0100992847240240BB00605581522C02C0C200A0AC40222E04C0AE018059B632470280BD0500768E58900F4060008099422CCC0020380200431E13CD03204C03A030D2BFE0A95F7085B8480100C0CB95CD974BD23314B895D01A77F2F0E0E221E2C2';
wwv_flow_api.g_varchar2_table(5) := '6CB142611729106609E4229C979B231348E7034CCE0C00001AF9D1C1FE383F90E7E6E4E1E666E76CEFF4C5A2FE6BF06F223E21F1DFFEBC8C020400104ECFEFDA5FE5E5D60370C701B075BF6BA95B00DA560068DFF95D33DB09A05A0AD07AF98B7938FC40';
wwv_flow_api.g_varchar2_table(6) := '1E9EA150C83C1D1C0A0B0BED2562A1BD30E38B3EFF33E16FE08B7EF6FC401EFEDB7AF000719A4099ADC0A383FD71616E76AE528EE7CB0442316EF7E723FEC7857FFD8E29D1E234B15C2C158AF15889B850224DC779B952914421C995E212E97F32F11F96';
wwv_flow_api.g_varchar2_table(7) := 'FD0993770D00AC864FC04EB607B5CB6CC07EEE01028B0E58D27600407EF32D8C1A0B91001067343279F7000093BFF98F402B0100CD97A4E30000BCE8185CA894174CC608000044A0812AB041070CC114ACC00E9CC11DBCC01702610644400C24C03C1042';
wwv_flow_api.g_varchar2_table(8) := '06E4801C0AA11896411954C03AD804B5B0031AA0119AE110B4C131380DE7E0125C81EB70170660189EC218BC86090441C8081361213A8811628ED822CE0817998E04226148349280A420E988145122C5C872A402A9426A915D4823F22D7214398D5C40FA';
wwv_flow_api.g_varchar2_table(147) := 'A514B7B6B6EA5AADA60B8582EAECEC54511471BD5EE7BEBE3EBF4E108FCA58FE9601580A68199FDAF12F8D1DDB5E3386221ADD8E3AF3CEC772A73505D60820C32BF0238E6DAF5D508DBAFFF2CFACE20C3E9A03E2789F3430B68D6DAF641BF33D8D6D63C0';
wwv_flow_api.g_varchar2_table(148) := '1ADBC68035B68D016B6C1BDBC68035B6BD46B6FF3B0074B1DD40306DC6CD0000000049454E44AE426082';
end;
declare
l_name varchar2(255);
begin
l_name := 'logo.png';
wwv_flow_api.create_or_remove_file(
p_name=> l_name,
p_varchar2_table=> wwv_flow_api.g_varchar2_table,
p_mimetype=> 'image/png',
p_location=> 'WORKSPACE',
p_nlang=> '0',
p_mode=> 'CREATE_OR_REPLACE',
p_type=> 'IMAGE');
end;
/Thanks Fac586! I did follow the process on those lines and was able to successfully get the images, application installed. The CSS which just had
body {
background-color:#000000;
}Was also applied. However, it for some reason does not work. Looks like the CSS is not getting loaded. When I delete the CSS and upload it again through the shared components->CSS folder, it works fine. Not sure what the solution is!
Oh and by the way, thanks a ton for helping everyone!
Cheers,
Ryan -
Calling Substitution Strings in Supporting Object Installs
So, for lack of a better way of putting it, I have a need to have user input durring the script install part of the supporting objects. I would like to use the Substitution String prompts but can not figure out where it stores the values durring install. It looks as if the system does not commit it to tbl until after the install scripts are done.
I need to create some views that have a different Databaselink based on site location and want the supporting object install scripts to prompt for the name so I can use it in the install process.
Testing on APEX 4.0.1 Oracle 11g
Thanks for any help.K, found something out. It does store it in a page variable P2103_SS_VALUES and can be called out using v('P2103_SS_VALUES') in the install scripts.
-
Images in supporting object script
I have noticed in Dene's application* that he has images in the supporting object script. I wanted to do this a while ago** but left images to be installed after the application using the separate import image function. Obviously, I would like to reduce this step to install in one shot. Is this possible or will it be in 3.1?
Phil
* http://htmldb.oracle.com/pls/otn/f?p=31517:90
** Re: Packaged app - image script problemSolved this by doing some research - did an image export from the application and then replacing the application ID in the script with v('FB_FLOW_ID')
( Re: Installed APP_ID in supporting objects seed data Thanks Scott!)
Phil -
Supporting Object Install Scripts - populate clob table
All
Before I delve into exactly how I thought I'd ask the forum if anyone had packaged up an install script to populate a table with a clob column?
I have an app that I am finishing up and the one remaining table has a clob column which obviously doesn't make for simple SQL inserts due to the CLOB type.
Thanks in advance
PhilHi Vadimon,
Thanks for reporting this, however I am struggling to reproduce the issue.
I created an application with 2 installation scripts (1 without a condition and 1 with a condition set to NEVER), then imported this into a 4.1 instance installing supporting objects. Here, only the 1 without a condition executed, as expected. I then created 2 upgrade scripts (again 1 without a condition and 1 with a condition set to NEVER), then re-imported this to upgrade the application. Again, only the 1 without a condition executed, as expected.
Would you be able to send me an export of an application where this reproduces, or provide the steps you took to reproduce this?
Regards,
Anthony. -
The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1
Hai friends,
I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
"The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
What does it mean? Kindly help.
Regards,
Neha SolankiHi,
It's not Absolute version. It's obsolete version(means No more)
This will help you:----
The extraction program does not support object 0JOB_ATTR
Regards,
Suman -
The extraction program does not support object ZTD_AW_17
Hi friends,
When doing extraction I am getting the below error.Please
see the below extract of system response.
"The extraction program does not support object ZTD_AW_17
Message no. R3 009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
System Response
The data extraction is terminated."
Please help me out.
thanks
VenkatHi Venkat,
Have you checked to see if the ZTD_AW_17 infoobject is in your system and active? If not, transport the object from your D system to the P system. Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there. If so reactivate the transfer rules and run the extraction again.
Aaron
Maybe you are looking for
-
How can i see the name of the photo when i sync from pc?
I can't see name of any photo when I sync them from my pc. You show me how to see it please. Thanks a lot
-
Applescript - how do I use the result of a library return value
Hello. Been using applescript for about a week. Very new. I'm using the following script below using an external libarary to query mysql database on external server. works. gives results. How do I save them to do something with the. when I run
-
Process not getting correlated and going into manual recovery stage
Hi I have developed a bpel process which implements correlation. I have unit tested it and is working fine. But am encountering issues in case of load. The process which should correlate to the running process is going into manual recovery and the co
-
Restore tablespace in RMAN is not working
Friends, OS: RHEL AS 3.0 DB: 9iR2 New to RMAN I am testing RMAN in our R&D server. I just deleted one table in scott which is in the users tablespace. then i went to rman. SQL 'ALTER TABLESPACE users OFFLINE IMMEDIATE'; RESTORE TABLESPACE users; RECO
-
Hi, I am using Oracle Application Server 10g Release 2 on Windows 2003 server service pack 2. My application has 5 distinct ejb timers inicialized on server starting. Its should works for each 10 minutes. I can see on log file that the ejbTimeout() m