BDC Source Field

HI Experts
I have a BDC programme, how I can know the source field. of BDC Programme. Please guide.
Regards
Parkash chand

Maybe you can find your source field in tcode SHDB.

Similar Messages

Source Field in End Routine of DSO Transformation

Hi,
I made a transformation from source DSO to Target DSO.
There are 7 fields in source & 6 fields in target..All the 6 fields are one to one mapped from the source to Target
I need to write a simple ABAP Logic in End Routine based on the 7th source field which is not mapped.
Please let me know the piece of ABAP code or steps where i can get the value of Source table in End routine
Regards
Suresh

Hi Suresh,
Check here.........
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
Regards,
Vijay.

Less source fields in transformation than in the source DSO

Hi,
I'm in a business content flow DSO 0GN_BP (consolidated BP) to fill master data attribut 0GN_VENDOR.
In the transformation source fields I only have a part of the fields in the DSO.
17 fields in DSO and only 10 in the source fields in the transformation.
How can I get all the fields of the DSO as source fields in the transformation ?
Regards,

I've log out log in, refresh the hierarchy etc. Nothing.
I hit the right DSO with the transformation.
The DSO is activated as well as the infoobject inside.
I've tried to reactivated it just to be sure ... but still missing fields in transformation.
I've also reactivate the DSO. Run RSRT on DTP, DSO ... all green.
I've check the structure tables of the DSO and they all got the right number of fields.
This is really weird. I'm going through a customer message.
Thanks for your help. I'll come back here if SAP found a solution.

Keyfigures source field and table in R/3

Hi,
Can anyone suggest or send what are source field and table in R/3
Serv. Hrs     Serv.@BR     Serv.Disc.     Adjustments     NSR     Calc. Disc.     NSR/Hr     "Prior Yr
Serv. Hrs"     "Serv Hrs
Variance"     "Serv Hrs %
Variance"     "Prior Yr
NSR"     "NSR
Variance"     "NSR %
Variance"     "Prior Yr
Calc. Disc."     "Calc. Disc
Variance"     "Prior Yr
NSR/Hr"     "NSR/Hr
Variance"     "NSR/Hr
Variance %"     Net Services AP     Calc.Disc. AP     Std Rate AP     Rev/Hr AP     Expenses Incurred AP     Hours YTD     Gross Serv. YTD     Net Services YTD     Calc.Disc. YTD     Std Rate YTD     Rev/Hr YTD     Expenses Incurred YTD     Hours LTD     Gross Serv. LTD     Net Services LTD     Calc.Disc. LTD     Std Rate LTD     Rev/Hr LTD     Expenses Incurred LTD     "Equalization
Adjustment
AP"     "Unbilled
Adjustments
AP"     "Closeout
Adjustment
AP"     "Total
Adjustments
AP"     Unbilled Adjustment     Close-out Adjustment     Other Adjustments     "Net Rev
Actual"     "Net Rev
Plan"     "Net Rev
M(L) Plan"     "Net Rev
Prior"     "Net Rev
M/(L) Prior"     "Net Rev
Growth Rate"     "Net Rev
Period Plan"     "Net Rev
Remainder
to Achieve
Plan"     "Net Rev
% of Plan
Achieved"     "Prior Year
Period %
Net Rev"

Dear Sridhar,
Are you dealing with DataSource to extract data ?
If so...
gotoST05
Switch on the SQL Trace
Come to RSA3
Execute your DataSource
Goto ST05
Swicth off the Trace
Analyze Trace File...u will get the Table and Field names..
Regards,
Ram.

Field 'Version' not available as a source field in COPA derivation

HI,
I don't see the field 'Version' as a source field in CO-PA derivations (KEDR). Wondering why it is not available for derivation when I can see it as one of the fixed characteristics. Am I missing something in configuration?
Thanks in advance.

HI Pradeep,
I am sorry for the delayed response. Please go through note 134889 for your query.
Best Regards,
Abhisek

When defining copy rules, only one source field allowed

Our users have requested the facility to allow them to copy pricing condition records when in in VK12 transaction. But when configuring the copy rules, we have come across the following problem:
When configuring copying rules for copying pricing condition records,
there is no possibility to use more than one source/target fields.
In our example, the condition table created for a certain pricing
access sequence contains keys such as Sales Organization, Sold-to Party
"and" Product Hierarchies level 1 to level 9 (e.g. PH1 - PH9) .
In the condition table definition, fields PH1 to PH9, although key
fields, are also defined as footer fields. This means that per sales
organization and sold-to party, we can create more than one condition
record based on different combinations of PH1 to PH9.
However when setting up copy rules for conditions in SPRO (SD -
Pricing Control - Copy Control for Conditions) to allow our users to copy the condition records, for a given Source /
Target table, the standard selection screen only allows us to define one Source / Target field.
In our case, this is not helpful. The configurator should be allowed
to select more than one source field (i.e. PH1 and PH2 and ..... PH9). At this moment,
we can only select as source field PH1 or PH2 or PH3., etc..
Steps for the Reconstruction:
- Run Spro.
- Select SD --> Pricing --> Pricing control --> Copy control for conditions -- > Copying rule for conditions
- Select 'New Entries'. Selection screen is displayed. The issue is that in this selection screen, the configurator is allowed to select only one source field. He should be allowed to select multiple fields.
Can you help us with this problem please?
Your help is much appreciated!
Edited by: C. Hassink on Feb 2, 2008 3:50 PM
Edited by: C. Hassink on Feb 2, 2008 3:52 PM
Edited by: C. Hassink on Feb 2, 2008 3:53 PM
Edited by: C. Hassink on Feb 2, 2008 3:55 PM
Edited by: C. Hassink on Feb 2, 2008 3:56 PM

Hi Ralph,
I don't like that methode. Importing the same transport 15 times, each time changing the source-system mapping and making sure, that source-system gets the changes seems to be a huge source of errors, which will be hard to find.
What do you think of the following idea to solve the issue a totally different way:
All transfer-rules directly connected to the source-systems are stripped of all Coding, so there is a plain 1 by 1 transformation including 0logsys.
The InfoSources attached all lead to one ODS-Object, which has the only purpose to collect the data from the source-system without any transformation. So some fields a filled by a system and other fields maybe not.
The coding specific for source-systems is moved to transfer- / update-rules from that ODS-Object to the original ODS-Objects / Cubes and the "collecting" ODS-Object is emptied after every loading process.
This will result in a single point of change. It will be quite a huge program (maybe in startroutine) but it's the one and only point, where changes and corrections have to be made.
Regards
Robert

How to remove target node if source field value is empty SAP PI Mapping

Hello,
how to remove target node if source field value is empty in graphical Mapping.
Like if
MIddle name in source filed is empty, I would like to eliminate target field from out put XML.
Thank you
John

Hi Jhon,
If you want to remove all empty tags and you dont to complicate your message mapping, you can use a XSL, after the message mapping, to remove all the empty tags:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="node()|@*">
 <xsl:copy>
 <xsl:apply-templates select="node()|@*"/>
 </xsl:copy>
 </xsl:template>
 <xsl:template match="*[not(@*|*|comment()|processing-instruction())
 and normalize-space()='' ]"/>
</xsl:stylesheet>
Regards

Mapping with source fields

We are having characteristics keyfigures in SAP BW.We have to identify these fields in R/3 i.e. source fields and source tables.But we are unable to match some keyfigures and characteristics in R/3.What approach we have do.Mean if we are unable to find some characteristics and keyfigures in R/3 what we have to do and how to we mapping?what extraction we have to take?what approach we have to do

Hi Sam and Ramesh,
These reports are coming to Portal via Bw only.
And we dont have access other client (X client) BW systems and they are not giving design document also.They are giving only R/3 sytem copy and we are able to see reports in web based portal.Based on Portal reports we identified Characteristics and Keyfigures.And some characteristics and keyfigures we are mapped with R/3 source fields and Source tables.And these are not standard reports and all are custom report.And there is no use of businee content.Based on these information we have to develop reports from scratch mean from starting i.e. identifying KFs and char's and mapping fields with R/3 here I have doubt we are unable to map some fields with R/3 what we have to do?what approach we have to take.How we identify datasource.what extractor method we have to follow.
Please give ur suggestions.What we have to approach

Picking up required Characteristics from my Source field to Target field!!

Hi ,
I need to pick up data from a source field that is 35 characters long to a target field in my Cube that is only 4 char long. But the data that will be fed into this source field will be 4 char long only, so can anyone help me with picking up only the 4 char I need into my target field.
Is this possible, If yes kindly post the routine that will allow me to concatenate the remaining characteristics and pick up only the 4 char I need.
Thanks,
Guru.

Also, if this is the behaviour of the infoObject at all the places it is to be used, you can created Global Transfer Routine at infoObject level.
Otherwise you can write the routine in transformations, rule type "Routine" and then the avaiable source field can be used.
A simple example:
I needed to build a character date field for a cross-platform integration project I was working on. First, I defined the date field:
data: datechar(10).
To build the date lets use sy-datum, which has the current system date.
write SY-DATUM+4(2) to datechar+0(2).
write '/' datechar+2(1).
write SY-DATUM+6(2) to datechar+3(2).
write '/' TO datechar+5(1).
write SY-DATUM+0(4) to datechar+6(4).
Value of SY-DATUM 20010616
Here's how the field changes with the execution of each line.
06________
06/_______
06/16_____
06/16/____
06/16/2001
Hope this helps.
Cheers,
Sumit

UDF to truncate some characters in the source field

Hi all,
My source field is 18 characters , the target field is 15 characters.Si i need to drop the 3rd, 4th and 5th character from the source file.Can any body help me with the UDF to be written during the mapping

Hi Priya,
UDF is not required. Do The Mapping as suggested by RAJA..
Do It Like This
Input ------> subString(0,2) -----\
-------->Concat[]----->output
input ------->subString(5,13)-----/
Regards
Jyothi A

Combining two source fields in Import Manager

Hi,
I am trying to combine two source fields say fld1 with 5 digit and Fld2 with 3 digit so that combined fld3 of 8 digit can be mapped to a 8 digit field in destination MDM side.
Any suggestion how to do this is highly appreciated
Thanks,
-reo

Hi Reo,
I am just adding details to how to combine fields in the import manager.
To combine two or more existing partitions for a destination node steps are as follows:
1. In the appropriate source hierarchy tree, select the node whose partitions you want to combine.
2. click on the Partition Field/Value tab to make it the active tab.
3. In the appropriate Partition list, select the two or more partition items you want to combine into a single partition.
4. Click on the Combine button, or right-click on one of the items and choose Combine Partitions from the context menu.
5. MDM combines the selected partition items.
6. Now you can map this partition directly to the destination field.
But as ur requirement seems ,u do not need to set delimiter.
Hope it will help you and let me know the results. please remark .
Thanks,
Shiv Prashant Dixit

Tax Form: HR_F_MMREF_1_MD 'RV' Record 'Source Field Names'

Hi,
Without "Save" of the original (delivered) definition of the subject "Tax Form", the form was updated and customized by mistake or stupidity. (We are ECC 6.0 HR Rel 600 Level 0022 Payroll.)
If anyone can browse his or her "Tax Form Definition" via SPRO=>U S Payroll=>Tax Reporter=>Tax Form Definition=>Define Original Tax Form=> Select "HR_F_MMREF_1_MD" and RV Record..
Please let me know the Source Field Names of the following locations:
RV 088
RV 149
RV 185
RV 209
RV 233
RV 269
RV 297
RV 312
RV 320....
Thanks.
Ben

Hi Arthi,
Thanks for the reply , for TAX form Group W2M1, W2M2, W2M3 , while configuring Evaluation of tax form
the following items required to select
Evaluation of tax forms (Employee info required)
Time ranges , in which data will be stored
Reporting of retro calculation
Please let me know how to configure these evaluation forms ?? and Does any wagetypes needed to be assigned to these tax form groups ??
Note:
The customers has to use manual entries options in PU19 and use the below TFG to populate the respective fields accordingly.
W2M1 MW508-Employer Total Tax Exempt Credits
W2M2 MW508-Overpayment to be credited
W2M3 MW508-Overpayment to be refunded

FMDERIVE: adding a new MM source field

Hi, I'd would to know how to add the field KNTTP (Account assignement category) in a derivation rule.
So far, I've done this steps:
1) Adding the field in the structure FMDERIVE inside de APPEND "AFMDERIVE"
2) Activating the user exit EXIT_SAPLFMDT_002
*--- Copy additional fields from the structure COBL.
MOVE-CORRESPONDING i_cobl TO c_fmderive.
*--- Copy additional fields from the structure COBL_AD
MOVE-CORRESPONDING i_cobl_ad TO c_fmderive.
3) Creating the new derivation rule in transaction FMDERIVE, like this:
SOURCE FIELDS: KNTTP (Account assignment category) & PLANT (Plant)
TARGET FIELDS: FUND_CENTER (Funds Center)
CONDITIONS: FM_AREA = XXXX & COMPANY_CODE = 1000 & KNTTP = A
Unchecked all in Attributes tab.
RULE VALUES = For example: PLANT = 1000 & KNTTP = A ==> FUND_CENTER = A
PLANT = 1000 & KNTTP = K ==> FUND_CENTER = Z
SAVE
But when I'm creating a purchase requisition (ME51N) and I choose the plant 1000 and the account assignment category A, the derivation is not working.
We have made a debugging and we've realised that the structure i_cobl doesn't have the field KNTTP, so the exit always move to a blank space in field KNTTP.
Anybody can help me? Is there a way to add fields in the i_cobl structure?? Should I use another User exit because the field belongs to MM??
If anybody have any other idea, I will be glad to read it!!
Thanks in advance!
Lorena

Hi, there is a way of using KNTTP in derivation (this also applies to other fields not available in COBL/COBL_AD), not sure if it is a recommended approach because it requires reading the values from memory, it does work though.
Read the value of KNTTP from memory and assign it to C_FMDERIVE in EXIT_SAPLFMDT_002, include ZXFMDTU02. then it is available in derivation as source field, provided that you have added it to the structure. See code below:
DATA: lv_field(100) TYPE c.
FIELD-SYMBOLS: <ekpo> TYPE ekpo.
CONCATENATE '(SAPLMEPO)' 'EKPO' INTO lv_field.
ASSIGN (lv_field) TO <ekpo>.
IF sy-subrc = 0.
c_fmderive-usertemp1 = <ekpo>-knttp.
ENDIF.

Searching Web Apps with Data Source fields containing multiple values

I have a Web App with a field allowing multiple values to be entered similar to the checkbox list. I need to restrict allowed values to a large, finite list of values currently stored in another Web App as the data source. I can't apply the Data Source field type as that only allows single value selection. I also need to be able to use the Web App Search form to search for items containing 1 OR more values in this field (the search functionality of a checklist field type). Here's what I've tried for field types:
Text (string) or Text (multiline) field type - By saving a list of comma separated values (the same way that checkbox list outputs) to a text input or textarea, the search logic only searches for exact string (including commas) and doesn't parse the individual values.
List (checkbox list) field type - This allows me to search multiple values using OR logic, but the web app will only store values that have been entered as options in the actual web app field setup. I tried using a checkbox list with minimal or empty options hoping that whatever values I sent over in a comma separated string value would still get stored, but because the values came from my Web App data source and not the list of options stored with the field, they were not saved.
Has anyone found a way to do this?
My other question is about how I might use a similar multi-value field as described above but return search results containing items with ALL selected values for that field (AND logic).
Can anyone enlighten me to the inner workings of BC web app search logic?

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

How to identify the source field you jumped off in rri-exit

Hello Forum,
I need your expertise regarding the following problem:
We want to fill target fields in the RRI-Exit depending on the source field you called a report.
When we jump from report 1 to report 2 in BEx Analyzer, we'll get the mdflag in the i_thx_sender table.
Is there any way to get the same information by calling rri in web? Or is there any workaround to get the information from which field the rri started?
Many thanks in advance for any idea.
Kind regards,
Tobias

Hi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy

BDC Source Field

Similar Messages

Maybe you are looking for