BDC to assign MIC -:Error occurred when checking type $ group $.

Hi
We have developed a BDC program to assign MIC`s in routing operations,at the end of assigning the MIC`s in the operations the system is giving the below message .
Error occurred when checking type $ group $.
Please note that 100% sampling procedure is assigned in MIC`s.
Please advise how to recfity the same .
PS :- while creating it manually there are no errors.
Regards
Trishna Nambiar

There was some problem with Sampling unit of the MICs assigned in the operations. This caused the error. Error log was in Tasklist checklist in the Inspection plan.

Similar Messages

Error occured when checking type group

Hi Gurus,
I am getting an error during change of routing through BDC
I want to update the MIC against operation ,but in the last step I am getting the error
like "Error occurred when checking type 5xxxxxxxx"
Please suggest me why this error is coming.
Regards
Arabind

Hi Arabind,
Please check below posts. They talk about similar issue & I think they have the answer to your question.
BDC - Error occurred when checking type $ group $. | SCN
Error occurred in checking type group in qm
Thanks to the original contributers.
Regards,
Ragahva

Help! SAP-LSO - LSO-AE "A Read-Write Error Occurred when checking in the Object"

Using version 14 of LSO-AE
WBT publishes fine
Error occurs during check-in to Master Repository
It seems to be a 3rd party WBT created by the NTSB, so I only have the SCORM 1.2 package, no source files unfortunately.
Thanks in advance for any advice that is offered!

Figured it out. Not that this forum helped! But here is the answer should anyone else have a similar problem on check-in. The standard setting for the LSO Repository is 100MB. Trying to check in anything larger than this, caused the above error. Increasing the configuration setting fixed the issue and allowed successful course check in without the above error.

The below error occurs when are opening group policy management editor kindly suggest me what to do

Problem signature:
Problem Event Name:                        APPCRASH
Application Name:
mmc.exe
Application Version:
6.3.9600.16384
Application Timestamp:                     5215ef8f
Fault Module Name:
jscript9.dll
Fault Module Version:                        11.0.9600.17031
Fault Module Timestamp:                  530882eb
Exception Code:
c0000096
Exception Offset:
0000000000075a36
OS Version:
6.3.9600.2.0.0.272.7
Locale ID:
1033
Additional Information 1:                  ec0f
Additional Information 2:                  ec0f4898764fec44122dfe96fc36b0dc
Additional Information 3:                  4f6d
Additional Information 4: 4f6db505997e7dc082983dd077416716

Hi,
Would you please let me know edition information of the server where this issue occurred? Was it SBS 2011? Did
you remember which operation you had done before this issue occurred? For examples, install updates or third-party applications or any other?
On current situation, please run
sfc /scannow command to scan all protected system files and monitor the result. Please also check if all necessary Windows Updates were installed.
By the way, did you encounter any issue when open and use IE?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

When I check for an update my I pod says, "An error occurred while checking for a software update."

When I check for an update my ipod says, "An error occurred while checking for a software update."
I have tried,
-Rebooting my ipod
-Hard rebooting
-Deleting some apps to get more memory
-Resetting network settings
-AND WAITING, but it still doesn't work
CAN YOU HELP!!!!!!!!!!!!!!!!!!!!!?????????????????

I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

HT1338 when I click on software update it says ''An error occurred while checking for updates.'' Why does it say that?

So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!

Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

When i do a softwre update it comes up with an error occurred while checking for a software update

can you help

I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

An error occurs when trying to exit from ALV report

Hi,
I have a report which imports and display in ALV data from an excel file. Unfortunately when I'm trying to exit I receive an error as I copied below.
Runtime Errors         MOVE_TO_LIT_NOTALLOWED_NODATA
Date and Time          17.10.2008 08:39:18
Short text
     Error at assignment: Overwritten protected field.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
Error analysis
     A new value is to be assigned to the field "<L_BOX>", although this field is
     entirely or partly protected against changes.
     The following are protected against changes:
     - Character literals or numeric literals
     - Constants (CONSTANTS)
     - Parameters of the category IMPORTING REFERENCE for functions and
     methods
     - Untyped field symbols not yet assigned a field using ASSIGN
     - TABLES parameters if the actual parameter is protected against changes
     - USING reference parameters and CHANGING parameters for FORMs, if the
     actual parameter is protected against changes and
     - Accesses using field symbols if the field assigned using ASSIGN is
     protected (or partially protected, e.g. key components of an internal
     table with the type SORTED or HASHED TABLE) against changes
     - Accesses using references, if the field bound to the reference is
     protected (or partially protected) against changes
     - External write accesses to READ-ONLY attributes,
     - Content of a shared object area instance accessed using a shared lock
     (ATTACH_FOR_READ).
Trigger Location of Runtime Error
     Program                                 SAPLSLVC_FULLSCREEN
     Include                                 LSLVC_FULLSCREENF02
     Row                                     686
     Module type                             (FORM)
     Module Name                             MARKS_SAVE
How can I solve the problem ?
Thanks
Stefan

Hi ,
Please check the GUI status you are using for the ALV.
Looking at the code what i feel is that the error occurs when the user action is the code &SAL' or '&ALL'.
Please put a break point at the statement and see why is the error occurring
Regards,
Arun

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Error occurred when determining the business system (NO_BUSINESS_SYSTEM)

Hi ,
I am working on a POC(ECC 6.0(proxy)>PI 7.1>(proxy)ECC 6.0).
I have created
1) IR objects.
2)Proxy generation & report program to fill the proxy structure.
3)ID objects. (reciever CC, RA, ID, RD)
I am getting below short dump on Sender ECC side,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_AI_SYSTEM_FAULT', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
Error (id=GET_BUSINESS_SYSTEM_ERROR): An error occurred when determining the
business system (NO_BUSINESS_SYSTEM)
pls let me know, what might be wrong.
santosh.

Hello,
You may need to create your business system and point it to the Integration Server on SLD.
Generally it acuses an error on tcode SDLCHECK, for this please check note #1143810.
Regards,
Caio Cagnani

Another "An error occurred when attempting to change modules" error

Hello all:
After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
More details that may or (likely) may not help:
- Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
- I upgraded my Mac to the latest patch level after observing this error to no avail.
So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
Thanks!!!!
Matt

I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
Please post back your results.

Error occured when try to open the BI report from words (template builder)

Hi,
After i LogOn into BI Publisher thru words, successful. But when choose a report to open, error returned as "Error occured. Please check the settings and try again."
My team had do various of testing, try to reinstall the BI publisher desktop, but not able solve the problems. From the forum, someone comment is due to data loaded too large, so we try to put a query which only select single record from a small database, but still same error.
then we suspect is due to the proxy setting, because once i reset to bypass the proxy, i able to open the report thru words without any error.
i found this comment from online doc :
Have set up the proxy parameters (to avoid any firewall problems with the Web Services and RSS data set reports) in the xmlpserverstart.bat file or the oc4j.cmd file as per your installation.
Modify the following line, which defines JAVA_HOME. (Observe the proxy parameters in bold.):
• "%JAVA_HOME%\bin\java" %JVMARGS% -jar -Dhttp.proxyHost= <myproxy.mycompany.com> -Dhttp.proxyPort=<Port> "%OC4J_JAR%" %CMDARGS%
Restart xmlpserver or oc4j as the case may be.
but i can't found this xmlpserverstart.bat or oc4j.cmd from server.
Please comment.
Thanks
Regards
Eelyn

hi,
as per you query posted here, please chk ur sql statement what u had written...there may be some problem with that query that is y ur getting the below error.
"error occured. please check the settings and try again BI publisher"
regards
Kanoj

An error occurred when processing the spool request. (Possibly due to memory problems)

Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
Mohammed

Hello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai

BDC to assign MIC -:Error occurred when checking type $ group $.

Similar Messages

Maybe you are looking for