BDC: To Include more than one value in one field.

Hi All,
I want to include more than one value in a particular filed, while its running in back ground.
The requirement is like this
perform bdc_field using 'PNPABKRS-LOW'
'01'.
01 is a filed on employee payroll type : management staff.
02 - Filed staff
03 - work men
How can i include 02 and 03 also for the perform.
it has to check whether the employee can belongs to any of the above three.
Thanks in Advance,
Points Rewarded for Help full answer.

Hi, Ramesh,
You can not use all the 3 fields at the same time, instead you can pass on one variable in that perform.
eg.
take all your staff value in one internal table and use the following code
loop at i_tab into wa_tab.
data : l_variable type string.
perform bdc_field using 'PNPABKRS-LOW' wa_tab-staff.
endloop.
in first run of loop it will take value '01', in second '02' and so on.
regards,
vikas
plz reward if helpful.

Similar Messages

How to assign values for more than one field

Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
      Assign (fieldname) to <l_field>.
      <L_FIELD> = 'ZB'. " value according to your requirement
      Assign (fieldname1) to <l_field1>.
      <L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
Brahmaji

Hello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD

Hotspot on more than one fields in ALV Report

I want to add Hotspot on more than one field in ALV,
one field is Vbeln , one is BSTNK, one is matnr and so on.
i have used form user_command.and have written coding for Vbeln (on vbeln i am showing transaction VA02)
i want to pass an eror mesaage when user clicks on bstnk or matnr.
Thanks

Hi Lovleen,
*Global definitions *
Data Types
type-pools: slis.
types: begin of tp_data,
ebeln like ekko-ebeln,
*matnr like ekko-matnr,
*meins like ekko-meins,
lifnr like lfa1-lifnr,
chk1,
       end of tp_data,
       tp_tbl_data type standard table of tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
data: it_data type standard table of tp_data.
Heading of the report.
data: t_heading type slis_t_listheader.
======================= Selection Screen ==========================
selection-screen: begin of block b1 with frame title text-t01.
DATA: w_aux_ebeln like ekko-ebeln.
SELECT-OPTIONS s_ebeln for w_aux_ebeln
DEFAULT 1000 .
DATA: w_aux_lifnr like lfa1-lifnr.
SELECT-OPTIONS s_lifnr for w_aux_lifnr
DEFAULT 00000001000 .
selection-screen: end of block b1.
======================== Event Blocks =============================
at selection-screen.
start-of-selection.
perform get_data using it_data.
end-of-selection.
perform build_alv using it_data t_heading.
======================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
form get_data using t_data type tp_tbl_data.
SELECT e~ebeln
*e~matnr
*e~meins
l~lifnr
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM ekko as e
inner join lfa1 as l on elifnr = llifnr
WHERE e~ebeln in s_ebeln
AND l~lifnr in s_lifnr
endform.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
form build_alv using t_data type tp_tbl_data
                     t_heading type slis_t_listheader.
ALV required data objects.
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event    type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_sort     type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
Field Catalog
perform set_fieldcat2 using:
1 'CHK1' 'XFELD' space space space 'Select' 'Select this row' 'Sel'
'Select this row' space space space 'X' 'X' space t_fieldcat,
2 'EBELN' 'EBELN' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
3 'MATNR' 'MATNR' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
4 'MEINS' 'MEINS' 'EKKO' space space space space space space space
space space space space space t_fieldcat ,
5 'LIFNR' 'LIFNR' 'LFA1' space space space space space space space
space space space space space t_fieldcat .
Layout
x_layout-zebra = 'X'.
Top of page heading
perform set_top_page_heading using t_heading t_event.
Events
perform set_events using t_event.
GUI Status
w_status = ''.
w_repid = sy-repid.
Title
w_title = <<If you want to set a title for
            the ALV, please, uncomment and edit this line>>.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
    tables
      t_outtab                 = t_data
    exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = ''(001).
append x_heading to t_heading.
Program name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Program: '.
x_heading-info = sy-repid.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
endform.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
                     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-up = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
   p_colpos: Column position.
   p_fieldname: Field of internal table which is being described by
*            this record of the field catalog.
   p_ref_fieldname: (Optional) Table field / data element which
*                describes the properties of the field.
*                If this field is not given, it is copied from
*                the fieldname.
   p_ref_tabname: (Optional) Table which holds the field referenced
*              by <<p_ref_fieldname>>.
                  If this is not given, the parameter
                  <<p_ref_fieldname>> references a data element.
   p_outputlen: (Optional) Column width.
   p_noout: (Optional) If set to 'X', states that the field is not
*           showed initially. If so, the field has to be
            included in the report at runtime using the display
            options.
   p_seltext_m: (Optional) Medium label to be used as column header.
   p_seltext_l: (Optional) Long label to be used as column header.
   p_seltext_s: (Optional) Small label to be used as column header.
   p_reptext_ddic: (Optional) Extra small (heading) label to be
*                used as column header.
   p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
              whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
              or REPTEXT_DDIC as text for column header.
   p_hotspot: (Optional) If set to 'X', this field will be used
*             as a hotspot area for cursor, alolowing the user
*          to click on the field.
   p_showasicon: (Optional) If set to 'X', this field will be shown
                 as an icon and the contents of the field will set
*             which icon to show.
   p_checkbox: (Optional) If set to 'X', this field will be shown
               as a checkbox.
   p_edit: (Optional) If set to 'X', this field will be editable.
   p_dosum: (Optional) If set to 'X', this field will be summed
            (aggregation function) according to the grouping set
            by the order functions.
   t_fieldcat: Table which contains the whole fieldcat.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given
   is a data element.
If p_ref_tabname is given, the ref_fieldname given is a
   field of a table.
In case ref_fieldname is not given,
   it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-input     = 'X'.
    wa_fieldcat-edit     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    i_logo             = <<If you want to set a logo, please,
                         uncomment and edit this line>>
      it_list_commentary = t_heading.
endform.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
form user_command using r_ucomm     like sy-ucomm
                        rs_selfield type slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
   WHEN '&IC1'.
     Set your "double click action" response here.
     Example code: Create and display a status message.
     DATA: w_msg TYPE string,
           w_row(4) TYPE n.
     w_row = rs_selfield-tabindex.
     CONCATENATE 'You have clicked row' w_row
                 'field' rs_selfield-fieldname
                 'with value' rs_selfield-value
                 INTO w_msg SEPARATED BY space.
     MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
endform.                    "user_command
Reward Points if useful.
Regards,
Manoj Kumar

NetBeans VWP: help w/ AJAX, is it possible to refresh more than one field?

I have a form with lots of fields. Some of them the value is retrieved from the database, for example the service field, where the user types the service id and at the onChange event the form is submitted, executing the processValueChange handler. In this handler the service data is retrieved from the database and a static text with the service name and a static text with the service price are updated.
I'm trying to do this with AJAX, so at the onChange event of the service id text field I have the following:
document.getElementById('form1:stServiceName').refresh('form1:tfServiceId');
document.getElementById('form1:stServicePrice').refresh('form1:tfServiceId');It works, but the processValueChange handler is executed 2 times, and that's a problem...
Isn't there any way to refresh more than one field? With something like this for example:
document.getElementById('form1:tfServiceId').submit();
document.getElementById('form1:stServiceName').refresh();
document.getElementById('form1:stServicePrice').refresh();Thanks for any help,
Felipe

You may want to try creating your own custom popup lov
http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html
you can then create your own lov report listing all people and then when you click the name required you can passback as many values as required to the calling form.

At Line-selection in ALV for more than one field.

How to use At Line-selection in ALV Basic Report where there are more than one field for displaying Secondary Lists.
Ex: In Basic List there are 3 fields Volume_m Volume_y and Volume_i.When i click on any of the field i need to display the secondary list for that particular field.

Hi Pavan,
              Use User-command event of ALV.
Refer this code :
form BUILD_EVENTCAT using    p_i_eventcat TYPE SLIS_T_EVENT.
DATA: I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = P_I_EVENTCAT
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear I_event.
read table p_i_eventcat with key name = slis_ev_user_command into I_event.
if sy-subrc = 0.
    move 'USER_COMMAND' to I_event-form.
    append I_event to p_i_eventcat.
endif.
form USER_COMMAND' using p_ucomm type sy-ucomm
                           p_selfield type slis_selfield.
case p_ucomm.
WHEN '&IC1'.                       "&IC1 is the Fcode for double click
Use P_ELFIELD-VALUE for further processing . this will contain the value on which u will double click
endcase.
Reward points if helpful.
Regards,
Hemant

Creating form - want to change font style and size in more than one field at a time HOW??

creating form - want to adjust font style and size in more than one field at a time - HOW??

Select the fields with the mouse, right-click one of them, go to Properties
and set the settings you'd like them all to have.
On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]>

When designing, how do I copy more than one field at a time?

How do I copy more than one field at a time?

Hi,
You can use the Ctrl or Shift modifier keys to select multiple form items. Ctrl+click toggles the selected state of the item. Shift+click selects a range of form items.
Regards,
Brian

How to group by more than one fields in crystal reports

Hi
How to create groups in crystal reports by more than one fields, like
select fields,aggregate functions from table group by a,b,c

Not sure if I understand your question, but you you could create a formula to generate the string of data you want to group on. Then simply create a group based on the formula field.
For example, your formula could do something like (assuming all String fields):
{table1.FirstName} + {table1.LastName} + {table1.DateOfBirth}
, and then group on this formula.
-MJ

How to select and copy more than one field in SMARTFORMS

Hello, I have about 60 fields in my smartforms, I need to copy them and paste once more at the same page. There is a problem, I can not select and copy more than one field. Is there some trick to copy and paste more than one element simultanicly?

Hi,
There is no way to copy multiple elements in smartform.
you have to do one by one only

Dynamic Filter SAP HANA - For more than one field

Hi Guys,
    Is their any way we can apply filter for more than one field. Lets take below example i want to apply filter both on PERNR & DOJ. I am able to apply filter on PERNR but when i try to create filter on more than one field (PERNR & DOJ ) it throws me some error.
Please let me know how we can achieve this.
OUT_EMP_SAL = SELECT A.PERNR, A.DOJ, A.FNAME, B.SALARY FROM "SAPH74".EMP_INFO A
INNER JOIN "SAPH74".EMP_SAL B
ON A.PERNR = B.PERNR;
OUT_EMP_SAP = APPLY_FILTER(:OUT_EMP_SAL, :IN_PERNR )

Hi Lakshmi,
You may need to use the end while calling, i took the same example from the "Help" in hana.
CREATE PROCEDURE GET_PROCEDURE_NAME (IN filter NVARCHAR(100), OUT procedures outtype)
AS
BEGIN
    temp_procedures = SELECT SCHEMA_NAME, PROCEDURE_NAME FROM SYS.PROCEDURES;
    procedures = APPLY_FILTER(:temp_procedures,:filter);
END;
CALL GET_PROCEDURE_NAME(' SCHEMA_NAME = ''SYS'' AND PROCEDURE_NAME like ''TREX%''', ?);
Regards,
Krishna Tangudu

Summarization of field on more than one field

Hi All,
I have a internal table in which I have 6 field and I have to summarize the 6th field on basis of first five field.
can I summarize one field in internal table on more than one field.
Please help me out.
Regards,
Sandeep

Hi sandeep,
1. u want to summarize (total)
the sixth field,
on the basis of different combinations of first 5 fields.
2. simple
3. Create another table,
   with the same structure, say STAB.
4. just use this logic.
5. LOOP AT ITAB.
   CLEAR STAB.
   MOVE-CORRESPONDING ITAB TO STAB.
   <b>COLLECT STAB.</b>
ENDLOOP.
regards,
amit m.

[svn] 4916: sdk-14180 Handle updates to more than one field in an item when autoupdates are off .

Revision: 4916
Author: [email protected]
Date: 2009-02-10 13:32:12 -0800 (Tue, 10 Feb 2009)
Log Message:
sdk-14180 Handle updates to more than one field in an item when autoupdates are off.
QE Notes: None
Doc Notes: None
Bugs: sdk-14180
Reviewer: ryan
tests: checkintests mustella:collections
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-14180
http://bugs.adobe.com/jira/browse/sdk-14180
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/collections/ListCollectionView .as

Revision: 4916
Author: [email protected]
Date: 2009-02-10 13:32:12 -0800 (Tue, 10 Feb 2009)
Log Message:
sdk-14180 Handle updates to more than one field in an item when autoupdates are off.
QE Notes: None
Doc Notes: None
Bugs: sdk-14180
Reviewer: ryan
tests: checkintests mustella:collections
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-14180
http://bugs.adobe.com/jira/browse/sdk-14180
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/collections/ListCollectionView .as

How to Include more than one jar files

My application uses more than one jar files. And all the jar files i am using are signed. when i include the jar files, i am including them in the resources section of the ".jnlp" file . The section of code looks like this:
<resources>
<jar href="utestfw.jar" main="true" download="eager"/>
<jar href="crimson.jar"/>
<jar href="jaxp.jar"/>
</resources>
<application-desc main-class="utestfw.ObjectBrowser"/>
The deployment of the application is successful. The jar file - "utestfw.jar" contains the application main class when the application is launched it works, but when i choose the feature which involves the classes of either "crimson.jar" or "jaxp.jar" , the application terminates and the webstart console and the application is closed automatically. Am i wrong in adding the jar files? what is the way to add more than one jar files to the ".jnlp" file.
Can anyone please help me?
-Aparna

I'll post u the jnlp file which i am using. To sign all the jars i've used the same alias ( a self signed certificate using keytool and jarsigner).Here is the jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0"
codebase="http://127.0.0.1:8080/healthdec"
href="testTool.jnlp">
<information>
<title>Unit Test Manager </title>
<vendor>Sun Microsystems, Inc.</vendor>
<description>A minimalist drawing application along the lines of Illustrator</description>
<icon href="images/testing.gif"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+ 1.2+"/>
<jar href="utestfw.jar" main="true" download="eager"/>
<jar href="crimson.jar" main="false" download="eager"/>
<jar href="jaxp.jar" main="false" download="eager"/>
</resources>
<application-desc main-class="utestfw.ObjectBrowser"/>
<security>
<all-permissions/>
</security>
</jnlp>
Can u please look at the above code and suggest me where i am wrong. Thanks.
-Regards
Aparna

How to include more than one input ready rows in analyzer

Hi Gurus,
I have a requirement that, I need to have more than one input ready rows at the end of the query output in analyzer.
Normally it will show only one row as input ready at end of the query result in any manual planning analyzer., But my requirement is to have multiple input ready rows in analyzer. Is it possible in workbook/analyzer?.
Thanks,
V.Senthil

Hi Senthil,
Have a look at the below thread.
How to add new rows for input ready query in BEx analyzer
Regards,
Venkatesh

In one sessions.xml file can i include more than one project

Hi Folks,
I got a requirement to create more projects by using the same sessions.xml file if it is possible please let me know.
thanks
Venkatram R. Veerareddy

Hi Venkatram,
It is possible to have more than one session in sessions.xml. Have the sessions.xml like this
<toplink-configuration>
<session>
<name>Session1</name>
</session>
<session>
<name>Session2</name>
</session>
</toplink-configuration>
Use session broker for handling both the sessions simultaneously. For more details see examples in toplink under directory broker.

BDC: To Include more than one value in one field.

Similar Messages

Maybe you are looking for