BDLS for table BBP_PDATT not updated
Hi,
Would like to check if BDLS will update the logical system for table BBP_PDATT? We've run BDLS for our system.all logical system have been updated except table BBP_PDATT? Is it meant to be like that?
Thanks!
Hello,
There are couple of tables whic will not be updated even if you run the BDLS program.
BBP_PDATT is one among those tables which will not be touched fully by the BDLS. For this you need to get the changes done either via some Z_reports or manual changes.
Best Regards,
Rahul
Similar Messages
-
File-to-rfc ..database tables are not updating??
hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded --------->Zrfc 0..unbouned
...id --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id ---------->Ztimeticktes-item-operation
.....closingdate ----------->Ztimeticktes-item-exec_fin_date
.....status ----------->Ztimetickets-item-fin_conf
.....comment ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
RamHi..
my mappis is like this..
message message
.message1 message1
..workorders 1..1
..order 1..unbounded -
>Zrfc 0..unbouned
...id -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id -
>Ztimeticktes-item-operation
.....closingdate -
>Ztimeticktes-item-exec_fin_date
.....status -
>Ztimetickets-item-fin_conf
.....comment -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram -
Excise Tables are not updating
Hi,
I have a issue in Depot sale. I created a GR against a PO. Then I posted a Excise invoice. But the excise tables are not updating.
Why it so? Plz explain.......
Thanks & Regards
SaeedHi,
While doing the GR through T Code MIGO ( Good Receipt + Purchase Order) > Tick on "Item Ok" & Enter > and see one more additional menu will appear > Excise Invoice >Is there two options 1) No Excise Entry 2) Create RG23D Entry.
If you need to update Excise detail through MIGO you can select "Create RG23D Entry" or if you not require to update Excise entry through MIGO you can select "No Excise Entry" & after generating the GR document you can proceed for Excise updation through T Code J1IG.
Hope that you are understood.
Thanks & Regds,
Rajesh Kolhe -
HR Tables are not updated due to compression error
We have a custom program that program used to copy data from Production system to other QA systems. The program uses the FM
Table_decompress to decompress the file downloaded from Production and update the HR tables like PA* series in QA.
While uploading the those tables from the file it updates half of the tables and other tables are
not updated as FM Table_decompress produces a exception saying "Compression error". what would be the problem here?
Edited by: Ganesh Kumar on Feb 2, 2011 10:14 AM
Edited by: Ganesh Kumar on Feb 2, 2011 10:25 AMI have provided some information below that may help.
Step 1. Update the device using VZ Access manager. Instruction below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=14636
Step 2. Unplug the device (if tethered), restart the computer, and try another USB port (if applicable).
Step 4. Deleting and recreating dial-up connections.
http://support.vzw.com/clc/devices/knowledge_base.html?id=23830
Step 5. Try to connect.
Step 6. (If Step 5. Fails) Disconnect, unplug the device, completely uninstall the current version of VZ Access Manager, and restart the computer.
Step 7. Download VZ Access Manager from our website www.vzam.net
-On the main page, select Supported Devices on the left hand side.
-Under the Data Devices like for Verizon Wireless USB 760 (second from the bottom of the row)
-Select the link under the Windows 7 column for the Verizon Wireless USB 760
-Click Download Now and Save to the desktop
Step 7. Install VZ Access manager using the downloaded file
-Follow the step up instructions
-Plug in the device when prompted
-Try to connect
I hope this helps. -
Transient attriute of VO exposed as checkbox in adf table is not updated
Hi,
We are constructing a page where we need to display a adf table, we provide check boxes against each row to allow multiple selections.
Checkboxes are transient attributes on VO with updatable property set.
A strange issue is noticed, checkbox model for the very first row of adf-table is not updated.
Tested this scenario in 11gR2 also, and seems to be a bug.
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B9C7sgjVyCnoZTlmN2Y5MDItYTJhNy00MzA3LWE0ZTctOGRhNjZiMmYzNzZm&hl=en_US
Please help us.
Thanks,
Sunil.Is this issue got resolved?
I have the same issue, i have one transit VO and i drop one of the attribute as check box, now when i select all check boxes and try to remove the rows its alway refreshing when delete popup appear, only 1st row is selecting remaining check boxes are refreshing.
Can any one have any idea on this. -
Register RG23C2 and table J_1IPART2 not updated
hi gurus
we have an issue in exercise register and table updation.
we Used T Code ---> J2IUN ---> Monthly utilization. there after
the gl account has been updated but our register RG23C2 and the table J_1IPART2 not updated.
in the month of last september.
After that we did in march and it was updated but the september entry is still not updated in the register and in the table.
we thought of updating the table through a zprogram but it is not recommended by sap.so please give me a guidance on how to update the table and the registerHi,
Check whether
1.Actually any entries are there for RG23C2, this you can check from table J_1IPART1 by choosing Register type 'C'.
2. If entries are there, must be posted through 'J1iex'.
3. Execute 'J2I6' before viewing the register.
Regards -
Early Adopter release : Extract DDL for tables does not work
Hi,
just had a look at Raptor - really nice tool - easy install - could be a replacement for SQLnavigator for us. One or two things I noticed though ...
1)
Export->DDL for tables does not work throws following error
java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.TableDMLExport
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
and 2)
when I click on a package body - I get "loading ..." below it but it never puts the
procedure names in and the "loading ..."message stays in the tree view - however you do get to see the packages in the source window.
Realise this is very much a work in progress and am grateful to see an early release such as this. Looking forward to the production release.
Best regards,
David.OK thanks for looking ....you've obviously got the fixes on your to do lists
Noticed that the SQL tab when you select an object works fine - displays the
DDL for the object
Do you think you'll have functionality so you can select many objects (shift left click) and
then create a DDL script for them? It looks like you can do this for all objects in a schema but
the ability to select a subset of objects in a schema would be very useful for our DBA's.
Couldn't see any good reason for keeping using SQLNavigator
Many congratulations on producing such a useful tool.
Kind regards,
David. -
My I phone 4 will not back up to my computer, i tunes says somethinig is currupt.. there for I can not update my phone to the newest software so I have the original, a year and a half, and it is causing me issues. I dont want to update without backing up and lose everything!?
What does it say is corrupt?
What have you tried? -
Line item for header material not updating in COEP table
Hi all,
from last few days, I found that when I do confirmation and GR for process order, system is updating all line ( i.e. components, activity types) but line for header material that is finished goods or semi finished goods is not updating in COEP table, I have done GR for order and transferred stock from quality too.
But still its not updating. What could be the reason for it .
Thanks
Vivek VarunHi Krishnendu,
Thanks for the reply , FI document is not getting generated.
What could be the reason for it, as before it was working fine.
Thanks
Vivek Varun -
Issues with BDLS for table /SAPAPO/TSTROBJR after system refresh
Hi,
After a recent refresh of our QA system from the Production system, when we are running BDLS for the table /SAPAPO/TSTROBJR to convert the logical system from Prod to QA, it's not allowing us to make the change.
Error message reads:
/SAPAPO/TSTROBJR LOGSYS 1 0 <<<<
<<<< Error in field of table . Manual correction required.
I have already tried to run the report /SAPAPO/SCHED_BUFFER_RESET, but this has not been of much help.
What can we do to resolve this issue?
Do we need to take some extra steps before we can run BDLS, or is there some other way to update these time streams for unloading point?
Thanks - PawanScheduling buffer reset did not update teh time stamps, but the new GATP checks are noe able to change teh time streams. So, issue doesn't exist now.
Closing this thread. -
BAPI_GOODSMVT_CREATE for production order,not update database
hi guru,
i am using BAPI_GOODSMVT_CREATE for production order.When i m testing this BAPI
at se37 it creates one mat doc no and i m not getting any return messages.Now i m
writing code for it at se38. but it does not update the database even though i used
bapi_transaction_commit. here sy-subrc = 0.bt when i m checking MSEG table showing
that mat doc no does not exists.
please help me out asap.
thanks and regurds,
manasiCHECK THIS CODE
REPORT ZBAPI_GOODSMVT_CREATE.
*DECLARING INTERNAL TABLE TO HOLD FILE DATA.
DATA: BEGIN OF itab OCCURS 0,
text(200),
END OF itab.
*DECLARING INTERNAL TABLE TO PASS FILE DATA.
TYPES: BEGIN OF tw_goodsmvt,
pstng_date TYPE budat,
doc_date TYPE bldat,
material TYPE matnr,
plant TYPE werks_d,
stge_loc TYPE lgort_d,
move_type TYPE bwart,
* entry_qnt TYPE erfmg,
costcenter TYPE kostl,
END OF tw_goodsmvt,
tt_goodsmvt TYPE STANDARD TABLE OF tw_goodsmvt.
DATA: lt_goodsmvt TYPE tt_goodsmvt,
lw_goodsmvt TYPE tw_goodsmvt.
*declaring internal table of bapi structure.
DATA:s_goodsmvt_header LIKE bapi2017_gm_head_01,
lt_goodsmvt_item TYPE STANDARD TABLE OF bapi2017_gm_item_create WITH HEADER LINE,
lt_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA:str_filename TYPE string,
gm_code TYPE gm_code,
v_head_count TYPE i VALUE 0,
v_prev_count TYPE i VALUE 1,
v_qnt TYPE string,
v_dummy.
*selection screen
SELECTION-SCREEN BEGIN OF BLOCK bk with frame title text_001.
PARAMETERS:p_docdat TYPE bldat,
p_pstdat TYPE budat,
fname LIKE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR fname.
*to provide F4 functionality.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
IMPORTING
file_name = fname.
* start of selection
START-OF-SELECTION.
str_filename = fname.
gm_code = '06'.
* to upload data
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = str_filename
filetype = 'ASC'
has_field_separator = 'X'
read_by_line = 'X'
TABLES
data_tab = itab.
*SPLITING DATA TO INTERNAL TABLES.
LOOP AT itab.
IF itab+0(1) EQ 'H'.
v_head_count = v_head_count + 1.
IF v_head_count GT v_prev_count.
PERFORM bapi_upload.
ENDIF.
SPLIT itab-text AT ',' INTO v_dummy
lw_goodsmvt-pstng_date
lw_goodsmvt-doc_date.
s_goodsmvt_header-doc_date = lw_goodsmvt-doc_date.
s_goodsmvt_header-pstng_date = lw_goodsmvt-pstng_date.
v_prev_count = v_head_count.
ELSEIF itab+0(1) EQ 'L'.
SPLIT itab-text AT ',' INTO v_dummy
lw_goodsmvt-material
lw_goodsmvt-plant
lw_goodsmvt-stge_loc
lw_goodsmvt-move_type
v_qnt
lw_goodsmvt-costcenter.
* PASSING DATA TO INTERNAL TABLE TYPE BAPI STRUCTURE.
lt_goodsmvt_item-material = lw_goodsmvt-material.
lt_goodsmvt_item-plant = lw_goodsmvt-plant.
lt_goodsmvt_item-stge_loc = lw_goodsmvt-stge_loc.
lt_goodsmvt_item-move_type = lw_goodsmvt-move_type.
lt_goodsmvt_item-entry_qnt = v_qnt.
lt_goodsmvt_item-costcenter = lw_goodsmvt-costcenter.
APPEND lt_goodsmvt_item.
ENDIF.
v_prev_count = v_head_count.
ENDLOOP.
PERFORM bapi_upload.
*& Form bapi_upload
form bapi_upload .
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = s_goodsmvt_header
goodsmvt_code = gm_code
* TESTRUN = ' '
* IMPORTING
* GOODSMVT_HEADRET =
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
tables
goodsmvt_item = lt_goodsmvt_item
* GOODSMVT_SERIALNUMBER =
return = lt_return.
PERFORM commit_work TABLES lt_return.
CLEAR : lw_goodsmvt, s_goodsmvt_header.
REFRESH: lt_goodsmvt[], lt_goodsmvt_item[].
endform. " bapi_upload
*& Form commit_work
* text
* -->P_LT_RETURN text
form commit_work tables p_lt_return structure bapiret2.
IF NOT lt_return[] IS INITIAL.
*error handling
loop at lt_return.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = lt_return-id
LANG = sy-langu
NO = lt_return-NUMBER
V1 = lt_return-message_v1
V2 = lt_return-message_v2
V3 = lt_return-message_v3
V4 = lt_return-message_v4
IMPORTING
MSG = lt_return-MESSAGE
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
WRITE: lt_return-id, lt_return-message, lt_return-message_v1, lt_return-message_v2,
lt_return-message_v3, lt_return-message_v4.
CLEAR lt_return.
ENDLOOP.
ELSE.
* commit work
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
IMPORTING
RETURN = lt_return.
WRITE: lt_return-id, lt_return-message, lt_return-message_v1, lt_return-message_v2,
lt_return-message_v3, lt_return-message_v4.
CLEAR lt_return.
endif.
endform. " commit_work -
Scheduled finish date for process orders not updating in BW
We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, where data is coming from, is always updated with the changes though. 2LIS_04_P_MATNR is used in extracting the data.
Has anyone experienced the same problem? We are looking for possible ways on how to have a delta whenever there are changes on the process order even after it is already released.
Any help would be greatly appreciated...Hi Donna,
If I've understood your problem correctly, you can increase the load frequency as Sriee has pointed out.
If you want latest data frequently and if you are on BI 7.0 then you can look at Real Time Data Acquisition(RDA)
Regards,
Tom. -
CDHDR table is not updated after execution of transaction CK 24
Hi Experts ,
I am Triggering my workflow from for CK 24 transaction based on the change document entry from CDHDR table , once the CK24 transaction executes .
Now the problem is after execution of the CK24 transaction now its not updating the table CDHDR, which was happening before .
Note: No customization has been made which can affect this updation .
Can any body please guide me on this , why the standard table is not being updated now with the change document entries .
Regards
SarmisthaYou can use following FMs
CHANGEDOCUMENT_READ_HEADERS Change document: Read change document header
CHANGEDOCUMENT_READ_POSITIONS Change document: Read change document items
IN CDPOS you have to give the same thing as CDHDR. You have to search with the respective Object class and provide the Object Id(Key fields like Document number). Another thing you will also get the change document number from the transaction itself from which you are change the Document.
Thanks
Arghadip -
Dear,
We use F-58 for cheque and advice printing but facing a problem after ECC6 upgrade TDS is not updating in REGUP table thats why not coming in payment advice.
Suggest what to do ?
Regards,
VarunHi,
Please consider notes:
1141745
1371600
1159081
118494
I hope this helps!
BR,
Raquel -
Dreamweaver Teamplate with Library Item for Navigation/Sidebar not updating editable classes
I have a Dreamweaver Template that contains two Library items. One Library item is my navigation bar, the other is a sidebar that shows different content depending on what page you are on. I'm assigning an editable class "active" to the navigation bar to show you are on a particular page, and also assigning the editable class "active" to the sidebar to reveal a portion of the sidebar with links pertaining to that specific page. The default value for the class is "hidden". So what is happening is when I open a page I have created and "edit" the Library Items in it to edit these classes, it resets resets all the other pages on the site to the default class values. How am I able to use editable classes and Library Items to achieve this kind of functionality? The idea is to only have ONE navigaton bar to update on the site and to only have ONE sidebar item to update. Here is an example of the sidebar and navigation in action so you can see what I'm going for. Notice the green button in the navigation bar (that is a list item with the class "active" which is an editable class in the Library Item, also notice the tan links in the sidebar, that is an unordered list that has an editable class of "active" in the Library Items --- these editable classes reset to their defaults when updating the Library Item on the website).
http://www.brumleve.org/joe/temp/CAP/mission.htmlIn my understanding, whenever you edit the contents of a library item, it will update all other occurances of this library item on the rest of the site. That's "working as designed" as far as I know, unless you break the link by telling it to not update - which kinda defeats the purpose I think.
But theres another way to do this using template properties, i#ve been using this approach myself a couple of times:
Write your navigation bar in the template (.dwt) file itself, then select the class= of your first menu item and choose .. (names might be off, I am using a non-English copy of DW): "modify > template > make attribute editable" from the main menu. Do so for all your menu items and name these new template properties something like "item_x_class"
You'll end up with something like this in your template source:
<div class="@@(item_1_class)@@">
and a matching
<!-- TemplateParam name="item_1_class" type="text" value="active" --> in the header
Now, on each page, you can set the class within the template properties dialog ("modify > template properties"). If your main menu changes, it won't overwrite your template properties, but still update all pages when you do make a change to the menu.
If you're using multiple templates for your site, consider nesting templates, so the master template already includes your navbar and all subsequent templates will "inherit" changes to the navbar code (sans the editable class property).
Hope this helps.. or at least gives you an idea for further experiments..
Stephan
Maybe you are looking for
-
Recovering a project in iMovie 3???
So I was working on a project and saving often. iMovie 3 then quit unexpectedly, and when I reopened it, my clips were all still there, but back in the clip panel (not in the project)? How can I restore my work without having to re-order my clips? An
-
Oracle 10.2 RENAME command broken ..
Hello all, I did the following to rename a file: "alter database rename file [DATA_FILE_1] to [DATA_FILE_2]' But .. When I do: "select name from v$datafile" I see BOTH [DATA_FILE_1] --- AND --- [DATA_FILE_2] To me, I should only see [DATA_FILE_2] :-|
-
Sample CLASSES for different types of OIM components!!!
Hi Experts Can any one provide me sample classes for different types of OIM components, adapters, scheduled tasks, etc. with your best practices for OIM java development and documentation? It would Help me lot. Please let us know Links/Documentations
-
Sorry if I am duplicate posting! When will Flash content be playable on IPT, getting a little bored of Lego Block. Does anyone know if there are plans to have permissions for alternative browsers installed (i.e Firefox) in the future?
-
Downloading a movie from i-tunes, it won't stop downloading from i-tunes but it is downloaded on my i-pad. What do I do to stop it?