BDLS: Partner profiles not change - System Landscape Copy (SRM+HCM+ERP)

Hello,
Can anybody help me for system copy i.e. production to quality.
System Landscape:
- 1 central HCM System
- 1 central SRM System
- 6 Backend Systems (ERP)
Problem: Change Log. Systemnames (SALE) and Partner Profiles (WE20) and ALE-Distribution Model (BD64).
We run BDLS (change RFC/log.Systemnames/ change BD64), but we have problems with Partner Profiles (WE20). Which do not change !
Anybody knows this problem?
What can I do?
Thanks, Silke

Running BDLS would not normally revert the setting for the partner profiles. You could either load it again via backup transport or make new entries accordingly to the specific settings prior to the system copy.

Similar Messages

EDI partner profile not maintained.

I am currently working on BI 7 and on trying to install ODS from BC its giving me error that
EDI partner Profile is not maintained.
Can somebody please send me the documents on how to maintain EDI partner profile for transferring data from ODS to Infocube.

Hi Amit,
EDI partner profile is maintained using Tcode WE20.
YOu need to select LS (Logical System ) and your Source System.
And maintain Inbound and Outbound parameters here.
Check OSS Note 886102 - System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
Step 6.8: Reactivate all partner profiles that carry the new logical system name after renaming
Execute Transaction WE20 to reactivate the partner profiles. Choose "Partner type LS (logical system)" enter the logical system name of the partner in tab "classification", change the partner status from "I" (inactive) to "A" (active) and save.
Hope this Solves your problem
Thanks
Ck

Getting EDI:Partner profile not available.

Hi,
I am a newbie to SAP XI. As I am doing File to IDOC scenario, I am getting error - EDI:Partner profile not available.
My Scenario details:
1. Created RFC Destination, RFC port, logical System and Partner profile in both Sender (XI) as well as Receiver(SAP R/3) systems.
2. Created SWCV, Technical sys, Business Systems in SLD. I used the Logical system created (for SAP R/3) on XI system in my business system.
3. Created Data type, Message type, Message interface, Message Mapping and Interface mapping in Integration Repository and activated them.
4. Imported IDOC from SAP r/3 system during Namespace creation and used it for mapping.
5. used Integration Directory wizard to create Communication channels, Sender & Receiver agreements, Receiver Determination, Interface Determination.
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
7. Activated all Standard Change list items.
The file for the above Scenario has been picked up amd i am getting "Chequered Flag" on both ends in "SXMB_MONI" monitor. When i change over to SAP R/3 to check idocs created (i.e., T.code - we05) my scenario idoc status is 56 and it says.. Status; Idoc with errors added.
I have gone through many of the forum suggestions and blogs regarding this issue, but still not able to resolve my problem.
can somebody suggest me solution please.
Thanks,
Vijay.

Hi,
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
>>>Check this for Reciever Business System.. not for Sender system..
BTW, if you get chequered flag in XI, then idoc data is sent from XI. Can you check all the data from XI is populated in the idoc structure in SAP R/3 in we05...by clicking each segment.. if so, then there is no problem from XI..
check WE20 ..partner profile configuration in R/3 also check inbound parameters are given
Regards,
Moorthy

Partner profile not available.

Dear Folks,
i am doing the scenario JDBC to IDOC. For that i did all the necessary ALE settings and configured the systems. While executing that scenario. In we02, i am getting the error partner profile not available eventhough i configured it. From the error i found that, in technical info, partner number and port are different. And i am getting some Default parnter number and port.
From my observations, i checked the Sender business system and i found that, logical system which was mentioned for this business system is replicating as a default parnter number in the technical info.
please guys i need your valuable suggestions to eradicate this error.
Regards,
Dileep

Hi Mark,
I checked the payload and i am not using header mapping.
I tested the same by doing some modification like, In sender business system, i replaced the default logical system name with which i am using.Then idoc status is changed to status 50. But i am getting the Default port as previously said.
one more thing is , whenever i am getting this partner profile error, it is hitting one of my Company portals. i.e., displaying this partner profile issue in MSS(managerial self service) of HR Portal.
I was little bit confused of why it is hitting the portal?
what would be the key point for their connection?
Please help.
Regards,
Dileep

IDOC is Getting Fail with - 56 Status EDI Partner profile not available

Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port BLANKKKKKKKKKK
Partner Number CLNTDEC110 Logical system for Client
Partn.Type LS Logical system
Function BLANKKKKKKKKKK
Port SAPDPI
Partner number CLNTSAMPLE
Partn.Type LS Logical system
Partner Role BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
 CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
 <IDOC BEGIN="">
 <EDI_DC40 SEGMENT="">
 <TABNAM> </TABNAM>
 <DIRECT>2</DIRECT>
 <IDOCTYP> </IDOCTYP>
 <MESTYP>INVOIC</MESTYP>
 <SNDPOR>SAPDPI</SNDPOR>
 <SNDPRT>LS</SNDPRT>
 <SNDPRN>CLNTDPI100</SNDPRN>
 <RCVPOR>SAPDEC</RCVPOR>
 <RCVPRT>LS</RCVPRT>
 <RCVPRN>CLNTDEC110</RCVPRN>
 </EDI_DC40>
Regards
PS

Check the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
 in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas

EDI partner profile not found

Hi All,
We are facing a recurring issue which happens in BW QA system after we refresh is from the BW production system.
After about a week or so after the refresh, the data loads halt in the BW QA system and the BW team gets an error "EDI partner profile not available".
After i checked, i found that the logical system name entry for the EDW QA system (i.e. self system entry) is missing from the table EDPP1 and also from transaction WE20.
I re-created it in WE20 and the entry automatically got created in EDPP1 table.
My question is : I suspect that some job or application program is deleting this entry. We checked the background jobs but no luck.
How do i resolve this error. The client has come up with this question and he wants an answer as to why this
entry is being automatically.
Can you please help?
Regards,
Hari Kishan

Hi Ruchit,
Yes. We run BDLS correctly. In fact, ONLY after BDLS jobs complete correctly, then we proceed with the further steps.
However, as per your sugesstion, i went to BD64 but couldn;t find any relevant distribution model.
Can you please elaborate this?
I am still unable to understand how the entry "OBC100" is suddenly disappearing.
One day, it is there and the BW loads run fine.
Suddently, one day, its not there. This has happened on 2 occassions one week after the refresh.
Regards,
Hari Kishan

EDI: Partner profile not available

Hi,
We have performed a client copy on the source system.
In RSA, source system check, errors occurred:
The following errors occurred in the source system: RSAR 374
EDI: Partner profile not available E0 332
Entry in inbound table not found E0 414
Entry in outbound table not found E0 400
In WE20, I click on the partner profile, check ok.
Pls assist.

Hi,
Try restore from context menu of the source system, this would recreate the partner profile entries.
regards,
Pruthvi R

Partner Profile not fnd (file-to-idoc)

Hi,
Idoc in r/3 failed with 56 error. Partner profile not found.
partner profile was set up (between XI logical system and R/3 system) in R/3 server.
Control record of idoc is showing sending system as MDMSBX01 with port SAPXI0. Actually, MDMSBX01 is the source sytem(file server). I can't even find this port SAPXI0 in IDX1. Not sure, how this got picked up.
I was testing the scenario by using "test message" in Integration Engine(RWB) since I do not have access to FTP server. I am sure this is causing to pick up wrong source system(instead of XI server system as source). Please clarify.
Below is XML message from MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>700</SAP:DOCREL>
<SAP:DOCNUM>0000000000011006</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>CREMAS05</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>CREMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPXI0</SAP:SNDPOR>
<SAP:SNDPRN>MDMSBX01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPEC0</SAP:RCVPOR>
<SAP:RCVPRN>EC0CLNT100</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>03</SAP:STATUS>
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>2007-04-20</SAP:CREDAT>
<SAP:CRETIM>14:36:52</SAP:CRETIM>
<SAP:ARCKEY>40697C80EF8711DBB286000F203CD31A</SAP:ARCKEY>
</SAP:IDocOutbound>

Hi,
as explained by Ahmad, see the Partner profile os created or not in , R3 system,
At the same time in receiver Idoc adapter select the apply control record from payload checkox .As per moni , the parner profile is in xml, so try to see the partner profile is created in R3 by TcWE21,check for inbound messgae type the said Idoc is existed or not and the corresponding process code is selected or not..
Regards
Chilla

Re : EDI: Partner profile not available

Hi
while i am transfering material master i am getting the following error
' EDI: Partner profile not available'
How to solve

Hi,
First check the change pointers configuration for matmas and then check configuration part for that partner.
Check these threads for complete information on Change Pointers:
Change pointers
what are change pointers
Regards,
Raju.

EDI: Partner Profile not active

Hi
I have a Delivery and a message that should create an IDOC.Whenever i call that message for my delivery ,i get this error:
EDI: Partner Profile not active
I checked to see in the table EDDP1 and the status is set to active.I also checked using the transaction WE20 and my partner was active there too,what can be the problem?
thanks

hi,
If your Receiver Business System is suppose BS_ECC, check in SLD what Logical system is maintained for BS_ECC. If for example Logical system for BS_ECC is ZLOG900 then check in ECC if in WE20 partner ZLOG900 exists or not. For ZLOG900 maintained inbound parameter for Idoc you are receiving in ECC like MATMAS.
Check the parameters accordingly in your system.
Reg,
NJ

EDI: Partner profile not available for the Ack received

Hi All,
All the scenarios are IDOC -->XI --> File
We have different scenarios of IDOC to File, where SAP sends IDOC to two (we have 5 here letu2019s say 2) diff FTP locations one say FTP1 and other FTP2 and we used 3 business systems in SLD.
1)      one for Sender SAP system(say BS_SAP) and assigned a Logical System say LS_SAPCLNT100
2)     Second one for the receiver FTP1 and assigned a Logical System LS_FTP1
3)     Third one for the receiver FTP2 and assigned a Logical System LS_FTP2
And we are getting the error in the Sender SAP System for the acknowledgement sent from the FTP1 server EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
This is because in SAP we do not have the Logical Systems for LS_FTP1 and LS_FTP2.
Now my question is how to get rid of this? Do we need to create Logical systems in SAP for third Party Systems?
If not how to overwrite and use a single LS for all of the third party Business Systems?
Please suggest .
Regards,
Sridhar Reddy

And we are getting the error in the Sender SAP System for the acknowledgement sent from the
FTP1 server uF0E0EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
did you get a chance to go through the below threads:
ERROR: idoc in R/3
check out the blogs mentioned in the above link...
Also check the last point (9) mentioned in the below blog:
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi

EDI: Partner profile not available R/3 -- XI

Hallo,
when I send an IDoc-Message from R/3 to XI, I get following error:
"EDI: Partner profile not available" (transaction we05)
I have created the partner profiles in we20, but there are not available.
What could be the reason of this error?
I have created in XI a logical system "SAPR3" (transaction bd54) and I have assigned it the idoc-inbound-parameter (transaction we20). also the logical system of the business system "R3System" in the "adapter specific identifications" is "SAPR3".
So, is the "partner no name" of the idoc from the sender-system (r3) the reason? in transaction we05, it is called WMS.
Thanks in advance.
regards
Stefan

<<You need to set Outbound parameters.
<<Inbound parameters are set in case of XI to R/3 scenario
The sap-documentation (HowTo_IDOC_XI_Scenarios.pdf) says, that you should create a partner-profile in R3 with outbound-parameters and that you should create a partner-profile in XI with inbound-parameters for the direction r3 --> xi
Is this wrong?
following informations are from transaction we05 in XI:
recipient information
port:
partner number: XI
partner type: LS
function:
sender information
port: sapi4711
partner number: WMS
partner type: LS
partner role:
Which of them should I create as logical system in transaction bd54 (XI)?
Which of them should I use for partner no. in transaction we20 (XI)?
Should I create outbound or inbound-parameters?
Thanks.
Regards
Stefan

Partner profile not maintained

hi,
i am trying to create custom idoc.To trigger idoc i am using we19 instead of writing a program.now my problem is that we19 genrate idoc with error "Partner Profile not Maintained".Although i have create partner,port.but in we19 it is not showing any entry in partner number,partner typ.,and partner role.therfor it is giving this error.but i don't know how to put entry in this field.
Regards,
Vaneet

Hi ,
It simply means that partner profile has not been maintained correctly.
Please check once again in WE20.
Also check once again all the steps required for successful IDoc creation, e.g creation of logical systems(ALE process), maintenance of customer distribution model etc.
Regards,
Raveesh

Could not get system landscape directory client - NWDS 7.31 SP 09

Hi Experts,
We are unable to import development configurations from NWDI 7.4 to NWDS 7.31 for one of the developer's id. Other developers are able to import the
configuration successfully in NWDS and are able to create projects without any issues. In fact, I am able to import the development configurations from his Id on my machine.
The error message that is appearing is as follows: Could not get system landscape directory client.
PFB the NWDS logs:
null
Error
Tue Jan 06 12:48:58 IST 2015
List Development Configurations failed [Error: com.sap.ide.dii05.ui.internal.sld.SldContext Thread[ModalContext,6,main]]
com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:719)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:608)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:352)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:205)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:153)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:450)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:754)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:989)
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:213)
at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:164)
at com.sap.ide.dii05.lib.internal.sld.SldBasicContext.listRemoteDevConfNames(SldBasicContext.java:197)
at com.sap.ide.dii05.ui.internal.devconf.wizard.DevConfImportSldPage$6.run(DevConfImportSldPage.java:293)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
NWDS version: 7.31 SP 09
Error Screenshot -
Any pointers will be highly appreciated.
BR,
Anurag

Hi,
we had some issues recently with this, and the trace also mentions proxy issues. Could you please try direct connection in that preferences (in other words do not use proxy settings in NWDS) ?
Is it possible that there is some kind of web-filter application installed that is blocking the request?
I'd suggest to google for this error:
407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
Perhaps the problem is not even sap related.
Is Microsoft Forefront TMG (Threat Management Gateway after some googleing) perhaps configured in the way that it is not allowing this request ? Perhaps the IT guys of your company could look into this.
Microsoft Forefront Threat Management Gateway - Wikipedia, the free encyclopedia
12209 Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.
Cheers,
Ervin

Where ca u assign Partner profile in XI system

Hi
in File to IDOC scenario
Where ca u assign Partner profile in XI system
bye..

Hi
No need to create partner profile in XI.
these r done in R/3
Check this link for IDOC
Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Reagrds
Sachin

BDLS: Partner profiles not change - System Landscape Copy (SRM+HCM+ERP)

Similar Messages

Maybe you are looking for