BDLS : Table T000 was not relevant for conversion

Hello,
After a system refresh ( homogeneous system copy in ECC6), we performed the post copy procedure.
I ran the BDLS transaction, all the tables were converted fine, exept the table 000.
I still have in transaction SCC4 the former logical systeank you in dam defined.
I checked the BDLS job log and found the message :
"Table T000 was not relevant for conversion"
I don't underdtand why ? Is it the normal behaviour ?
Table T000 is not excluded in BDLSC ...
Thank you in advance for your help.
Best Regards.

I just found out that I launched the BDLS from the client 000.

Similar Messages

  • Table T000 was not relevant for conversion in BDLS log

    Hi All,
    I am getting the below message in BDLS log  while doing logical system system conversion with BDLS.
    "Table T000 was not relevant for conversion"
    Due to this I could see old logical system entry in SCC4 instead of New converted logical entry.
    (I've gone through the forums ,but didn't find solution)
    Any Idea why I am getting this message and I triggered BDLS from client 000.
    Regards,
    Srinivas Chapa.

    Already SCC4  entry for the client has old Logical system name.
    Ex:
    Client 500
    Logical System : <PRD>CLNT500
    I need this to be change to <QAS>CLNT500 after BDLS,but it is not happening after BDLs.
    Regards,
    Srinivas Chapa.

  • Unit of measure conversion for CIN is not relevant for pricing

    During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
    Any light how to fix this issue?
    Thanks,
    Suseela. V

    Dear Suseela,
    You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
    Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
    Hope it will help. Thanks!
    Regards
    Indra

  • Using a Variable in SSIS - Error - "Command text was not set for the command object.".

    Hi All,
    I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table  I have created variables v_Archivequery
    String packageLevel (to store the query).
    <Variable Name="V_Archivequery" DataType="String">
         SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
         FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
         ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
         Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
        </Variable>
    I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
    FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
    Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
    Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
    But when I am generating the package and when running I am getting bewlo errror
     Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
    An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80040E0C  Description: "Command text was not set for the command object.".
    Can Someone guide me whr am going wrong?
    Please let me know where am going wrong?
    Thanks in advance.
    Thankx & regards, Vipin jha MCP

    What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
    Could you try set the Delay Validation = True at Package and re-run ?
    If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
    -Vaibhav Chaudhari

  • Delivery 0080000276 is not relevant for transportation planning.

    At the time of (delivery related) invoice creation, system throws a message "check the error log".
    Log says:
    " Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
                LongText
                    Detail
                     Diagnosis
                         Copying control for billing requires that shipment costs
                         are copied from the shipment belonging to this delivery.
                         No shipment costs could be determined, because this
                         delivery is not relevant for transportation planning.
                     System Response
                         The system assumes that no shipment costs are to be billed
                         in this case.
                Technical data
                    Tech. data details
                     Client                                 251
                     Group Number
                     Sales Document Number                  0080000276
                     Item Number of the SD Document         000010
                     Schedule Line Number                   0306
                     Counter in Control Tables              00
                     Message Identification                 VY
                     System Message Number                  306
                     Output Type                            I
                     Message Variable 01                    0080000276
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type                             F "
    Please advice if anyone have any idea for this error log.

    Error Log 0080000276 000010 Delivery 0080000276 is
    not relevant for transportation planning
    It is not necessary to assign the Transportation Planning to Delivery type.  Only recently, I completed a similar configuration and running successfully for a client.  The issue is  because of your copy control VTFL.  For more information, check note 713171.
    thanks
    G. Lakshmipathi

  • INTRASTAT / EXTRA - Credit memo not relevant for declaration

    Hi all,
    I have this problem with INTRASTAT declaration:
    Transaction VE08 mark credit memo as not relevant for declaration with this description "No association to a goods movement was found".
    Do you have any solutions?

    Hello,
    check VE80, if you have an exclusion indicator on the item category.
    If not try to run VE01 for your country and mark only credit memos. Use log type B. Check the message in the incompletion log. If your credit memos are not in the incompletion log, than run the transaction transaction VE08 you run before again. The credit memos should show up, otheriwse let me know what is the message in the incompletion log.
    Check also if you need to show credit memo from legal point. From my point of view it should show only data related to deliveries.
    Try and reply.
    Edited by: SAPSD1000 on May 25, 2009 6:03 PM

  • Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010 The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification VF
    System Message Number 044
    We need to issue the credit note.
    How to solve this issue?
    If any one knows pls guide me.
    Govind Bhaskaran

    Hi
    Thanks for all of your guidance.
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions to get some idea.
    Regards,
    G Bhas

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010  The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification                        VF
    System Message Number                       044
    We need to issue the credit note. 
    How to solve this issue?
    If any onw knows pls guide me.
    Regards,
    G. BHASKARAN

    Hi friends,
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions and guidance to get some idea.
    Regards,
    G Bhas

  • Item Not relevant for Billing - due to Batch Management

    Dear All ,
    We have activated the Batch  management and the materials are picked from the batch  . When we create billing document ZF2 and ZIV  using VF01 with ref to delivery , we get an message - check log - when we go to the log we see that item 900001 is not relevant for billimg n which is an warning message . This message need to be supressed .The message type - VF044.
    Can you please give me your inputs on this.
    Thanks and regarsd
    Veera

    Hello Friends,
    We are also facing the similar issue as -
    Delivery item 900001 is not relevant for billing , message
    Client: 002                     
    Group Number                                                   
    Sales Document Number  :                0080106599              
    Item Number of the SD Document:         900002                  
    Schedule Line Number                 :  0044                    
    Counter in Control Tables             : 00                      
    Message Identification                 :VF                      
    System Message Number            :      044                     
    Output Type                           : I                       
    Message Variable 01                                            
    Message Variable 02                                            
    Message Variable 03                                            
    Message Variable 04                                            
    Group Type                             : F                       
    As per the note 77414, we made all the settings however system is showing the same message during billing execution. In this regard could you please support to get the solution.
    Best Regards,
    Goutham

  • Item Cat NLN appears not relevant for picking even it is relevant in 0VLP

    Dear Expert,
    We have an issue in on the behavior of the item category we assigned to the replenishment delivery. The transaction starts from an STO-PO and create a replenishment delivery on the background via VL10B. The replenishment delivery was successfully created. The weird thing is, item cat NLN is relevant for picking. I checked the item cat assigned to the replenishment delivery and it shows NLN but it appears as not relevant for picking as picked quantity column is uneditable. Seems weird and this is my first time to encounter such issue. I tried browsing the net and had no luck to find same scenario. Can somebody please tell me what could be the possible cause of this issue? Thank you in advance!
    Kind regards,
    Mark

    Mark,
    Is the inventory warehouse managed or inventory managed? Usually, if you are in an inventory managed scenario, the system lets you directly input a picked quantity directly on the delivery. If you are in a warehouse managed scenario, you have to create a transfer order to do picking. You can check this by looking at field "OverallWMStatus" on the "picking" tab of the delivery. If the status says "WM Transfer Order required" you are in a WM managed scenario and have to carry out picking via a transfer order.
    More information here.
    Otherwise, I am not sure what the issue is!
    Krishna

  • Item is not relevant for Billing-VF 044

    Hello Experts,
    I have the scenario where i am doing Return Process.Here i have done it through scratch as in set the copy control for LR to RE ,with item category REN.
    The entire process was running fine till Post Goods Reciept.
    But when i am billing the same it says:-- Item is not relevant for Billing
    I have done the following :-
    VOV7-REN-Check-Business Item
                       Check-Credit Active
    Billing Relavance--A
    Pricing-X
    Kindly guide where i am missing anything.
    Regards
    Swati Bhatt

    Hi,
    I assumed you have thoroughly checked all the configuration is complete it as suggested by other consultants.
    In addition to the above, you may want to check if your item category is relevant for POD.  If yes, and the POD is not completed, then it would not be possible to create billing document when it is not completed.
    You may also want to check in your delivery document overall status of the Delivery document: Go To --> Delivery Header --> Processing.  Check the overall status whether it has met all the required status and what other status has not been fulfilled that prevented the Billing doc creation.
    Ideally, the standard system would not have POD relevance for return item, but it may have been configured by other individuals.
    Hope the above helps.
    Thanks.

  • GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

    Hi,
    does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
    thanks in advance
    Steffen

    Hi,
    the thing is the following (maybe it doesn't work at all, i don't know) :
    a) i have a "Non-stock" material (e.g.material type NLAG)
    b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
    c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
    d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
    During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
    "You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
    When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned  to it."
    So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
    Maybe shomeone knows what to do or has a better idea.
    Best regards
    Steffen

  • Enhanced Rebate settlement - item not relevant for billing

    I'm trying to settle an enhanced rebate agreement & i continue to get the error
    "Item is not relevant for billing".  I'm using the materials for which the rebate was accrued as the settlement materials via the configuration for a variable key. 
    I've checked item categories and copy control and do not see what can be causing this.  When bill a standard rebate agreement, i do not get these errors. 
    Any assistance would be appreciated.

    Hi Thomas
    As you are able to create rebate with standard rebate agreement, and as you are getting  "Item is not relevant for billing"  , then check your item category configuration and  condition type assignment  done in the pricing procedure.
    Also just cross check copy control settings  between the standard rebate copy control settings and your enhanced rebate agreement settings
    Also check the configuration done with the enhanced rebate agreements
    Thanks and Regards
    Srinath

  • In vf01 msg show0046000009 0000 the Document is not relevent for billing?

    Hi Guru,
    When we doing vf01 after PGI for stock transfer in same compony , Plant to Plant then Error Log show: "0046000009 0000 the document is not relevent for billing". msg no. VF032. item no. of the SD document  : 00000
    schedule line no. :  0016.
    Counter in Control tables : 00
    Message identification : VF
    System message No. : 016
    Output Type              : E
    Group Type               : F
    here i config new Sales document type , delevry type , billing type and item category,, and all show in my Delevry.
    my me21n ,vl04 & vl02n done fine but problem in vf01.
    plz guide where is problem?
    i m doing me21n>vl04>vl02n>PGI>vf01  it is correct step or not?
    Regards,
    S.Rahman

    Hi,
    If it is Delivery related Billing should take Billing Relevance "A" and check
    Why you mentioned "J" initially can you please explain is there any specific reason
    Regards,
    Prasanna

  • Message no. VF032 : The document is not relevant for billing

    Hi,
    I'm creating SO with 7 line item with using same item category type ZABC. I could able to do outbound delivery to all line item via VL01N. Then I wanted to perform billing via VF01, unlikely one of line item doesnt appear & getting error. Processing status shows as "incorrect".
    Error:
    No billing documents were generated. See log
    Message no. VF032
    Then I went VF01 --> Key-in SD Doc No. and Execute --> Edit (Menu-bar) --> Log to see the complete system error-log
    Error Log
                0080000050 000000 The document is not relevant for billing
               Technical data
                   Tech. data details
                    Client                                 888
                    Group Number
                    Sales Document Number                  0080000050
                    Item Number of the SD Document         000000
                    Schedule Line Number                   0016
                    Counter in Control Tables              00
                    Message Identification                 VF
                    System Message Number                  016
                    Output Type                            I
                    Message Variable 01
                    Message Variable 02
                    Message Variable 03
                    Message Variable 04
                    Group Type                             F
    Can anyone help me out. TQ
    rgds,
    nema

    Dear Yadav,
    scenario 1
    SO : 65
    MID : 3100010480
    item category : ZABC
    - outbound delivery & billing done
    scenario 2
    SO : 66
    MID : 3100120160
    item category : ZABC
    - outbound delivery done
    - error : No billing documents were generated. See log
    Message no. VF032
    - error during billing creation via VF01
    - SD document category - delivery & processing status - incorrect shows in billing
    - billing - edit - log - 0080000050 000000 The document is not relevant for billing
    Technical data
        Tech. data details
         Client                                 888
         Group Number
         Sales Document Number                  0080000050
         Item Number of the SD Document         000000
         Schedule Line Number                   0016
         Counter in Control Tables              00
         Message Identification                 VF
         System Message Number                  016
         Output Type                            I
         Message Variable 01
         Message Variable 02
         Message Variable 03
         Message Variable 04
         Group Type                             F
    *I'm wondering this may happen only this particular MID coz other MID able to generate billing. Plz guide me. TQ
    rgds,
    nema

Maybe you are looking for