BDOC - BUS_TRANS_MSG error in SMQ2 and SMW01

Hi All,
*When checked the Inbound queue (SMQ2) in CRM it shows this error for one sales order
.R3AD_304289786           11.11.2010 06:08:30 Error in Validation (Details: transaction SMW01)
*then when I check the error in SMW01 it shows this..* Error code is F05 in SMW01
Processing of document with Guid DFF206DE9B8CFFF1A7730024E84DD2E3 is canceled     CRM_ORDER     11
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3     18
I tried to re-process, but it still gives the same error..
how do I correct the error ? how do I fix it...? and re-process the BDOC.
any guidance...
Thanks
Ken

Hi Rohit,
where do I need to check the middleware settings... for R3AD*...in tbale SMOFPARSFA??
we are using CRM 2007.
Some time some sales orders are transfering from ECC6 to CRM without that error (succesfully) only some sales orders get that error....
any other area I need to check....?
Some of the entries in that tbale...
R3ACOMMON     SWITCH_OFF_LENGTH_CHECK     CDBC_TB039B     SPRAS
R3A_BILL     CRM_DEFAULT_DESTINATION_DIALOG     CRM_BILLING_FOREIGN
R3A_CMP     COMPARE_BLOCKSIZE
R3A_COMMON     CRM_AUTO_DELTA_EVENT_ACTIVATION
R3A_COMMON     CRM_R3OLTP_ACTIVE
R3A_COMMON     MAX_PARALLEL_PROCESSES
R3A_COMMON     WAIT FOR UPDATE     RESPONSE_DLV
R3A_COMMON     WAIT FOR UPDATE     SALESCONTRACT
R3A_SALES     BEHAVE_WHEN_ERROR
R3A_SALES     INT_NUMBER_ASSIGNMENT
R3A_SALES     PRICINGTYPE
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BOM
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BUPA_MAIN_20C
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     BUPA_REL_20C
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     CONTACT
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     CUSTOMER
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     MATERIAL
R3_CRM     R3_CRM_SERVICE_SYNCHRONOUS_CALL     SERVICE_MASTER
thanks,
Ken
Edited by: KenPerera on Nov 18, 2010 7:22 AM

Similar Messages

Viewing CIF errors in SMQ2 - Technical - ABAP

Hello All - I am CIFing the Master data from ECC to APO and i am getting the error. I was debugging the CIF from SMQ2 and i donot see any issue in the code but i am still getting the error in SMQ2 and i could not see the complete error message in SMQ2.Because of the limited space for the field Status in SMQ2.
My question is there any way to read/view the entire message in QRFC ? What is the Tcode ? or Where can i see the CIF error messages in APO..
Appreciate your help.
Thanks,
Venky.
Edited by: GVP2011 on Mar 21, 2011 3:42 AM

Hi Venky,
You can see the CIF error messages in /SAPAPO/C3 transaction in APO and CFG1 in ECC.Here you can directly enter the External ID from SMQ2 or you can see all the error messages via Object "CIFSCM".
I hope this will help you.
Regards,
Saurabh

Generation of Alerts for errors in SMQ1 and SMQ2

Dear Experts,
When messages get stuck in queue (SMQ1 / SMQ2) due to some error, we donu2019t get any alert notification (E Mail) from system. Normally we get below mentioned errors in SMQ1 or SMQ2.
1. Permanent error in BPE processing.
2. Error while accessing table.
Can you please suggest how do we generate alert notifications for the above errors in SMQ1 and SMQ2.
Thanks
Dhwani Kamdar

If u have CCMS configured for your landscape, then it could be possible. Else its not possible in my opinion.
http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Regards,
Prateek

SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

Hi,
We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
I do not understand whereelse I can see the detailed error message.
This error does not occur for all articles.
As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
Thanks and Regards,
Lakshmi

Hi Lakshmi,
Please follow as below:
SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
Regards...
Arup

Identify cause bdocs in error

We are working trough several bdocs in error (smw01) (BUPA MAINS , MRKTPROF) and so on .
Unfortunately it is quite troublesome to find the exact cause of the errors.
Can we use the following guidelines in order to detect errors or does anybody see any objections in this way of working :
<b>Go to transaction R3AC1 (Business Objects) R3AC3 (Customizing Objects) or R3AC5 (Condition objects) depending on what you are downloading.
Select the appropriate business object and go into change mode. On the header is a field called Block Size. Set it to 1 and save. Say no to the question of whether you wish to put it into a transport.
Now do your download. Monitor the download until it freezes. Go to SMQ2 and double click on the download queue of the object. It should be displaying the BDOC in error. Now you can look at the error message and the data and work from there.</b>
Thanks for your input.

Hi,
Check table CRMKUNNR in R/3 with the GUID. Get the customer number and run syncronization request with the customer number.
Make the following test for 1 BP which is in error for the moment :
- check if you have one entry in CRMKUNNR for your BP
- if yes, delete it
- send the BP back using a request or changing your filter in your adapter object and restart it via R3AS
- check in SMW01/SMQ1/SMQ2 if BP is saved in CRM
Regards,
Amit

BDoc validation error

Hi Experts,
I am getting the following error in SMW01.
State: Red
Bdoc State Decsription: BDoc validation error
BDoc type: BUPA_MAIN
Flow context description: mBDoc validate
Sender Site name:OLTP
Queue Name: R3AD_CUSTOME.
Please help.
Regards,
Soumya.

this is the BDoc error
this the error trace
and this is the BDocs msg error/receivers
thanks

Message with error in SMQ2

Hi,
Does anyone know why some messages with message mapping failures shows up in SMQ2 and some messages with message mapping failures won't show up in SMQ2?
Thanks,
Jay

Hi Jung,
If there is a mapping problem then you should be able to see the error messages in SXMB_MONI.
SMQ2 will show errors in case there are problems with inbound queue.
The various problems can be queue getting stuck, queues not registered, etc.. incase of mapping error you cannot see error in inbound queue (SMQ2).
Regards,
Gautam Purohit

Error in SMQ2 - Object requested is currently locked by user ...

HI together,
we send IDOCs from SAP R/3 through XI into an other SAP R/3 system (ORDERS). all messages will be processed but only 2 messages are get stuck in XI with the error message:
"Object requested is currently locked by user" in SMQ2.
Do anybody know a solution for that?
If i trigger the IDOC in WE19 again, the same error occurs again and again.
Many thanks
Alex

HI together,
very strange happening!!
i check the mapping of the error message and found out that we have a used a multiply function in the mapping (quantity * price). we have a price > 100000.00 and a quantity of 3. In testtab the mapping runs and runs and runs... nothing happens.
i created u UDF that solve the problem. i do not know why this is needed or what is wrong the the SAP standard mapping function.
Unfortunately we have this issue only in production, not in DEV or QA.
cheers,
alex

Customer replication (ECC - CRM), masses of Bdocs in error

Hello
I recently got my hands on CRM 5.0 where replication of customers from ECC to CRM should be set up.
There is no replication from CRM to anywhere else.
Based on my very limited CRM experience, it seems that delta download is running ok.
However there are hundreds of thousands Bdocs in error status and almost all of them seem to have same kind of errors: "Business partner with GUID xxx does not exit" and "Validation error occurred: Module CRM_BUPA_MAIN_VAL, Bcod type BUPA_MAIN".
It's of course possible to track down the cause of error and process the Bdocs one by one but what about the huge mass of hundreds of thousands of Bdocs? Any suggestions / ideas for this are highly appreciated.
Thanks!
Cheers
Mark

Dear Mark,
Please consider the information of note 757955 regarding transaction
CRMC_BUT_CALL_FU, you may have more entries for the events than described
in this note. This should be the reason for the errors in the BDoc.
This note explains the necessary customizing settings.
Another reason might be inconsistencies, so please check the reports in notes 703322,
609766
Regards, Gerhard

Bdoc validation Error - SMW3 - 18

Hi ,
I am stuck with initial upload of a Condition Object.
Tcde: R3AS
Now data is being uploaded in CRM table correctly, which is sent by R/3 backend system.
But all Bdocs are in Red state with Error status( Bdoc validation error SMW3 message no 18).
What i understand here is: This is because:
Example:
Records in R/3 table = 413
And block size set in tcode: R3AC5 is: 50
Initial upload, No. of Bdoc rcvd in CRM = 9 ( i.e 413/50 )
In R/3 there was only one record out of 413 which was changed which lies in any of these BDocs, altough R/3 is sending all the records in table i.e 413, so none of these BDocs was completely uploaded in CRM tables, only one block of one of these Bdoc was uploaded.
For that reason all these BDocs are in RED state.
When i tried to find Error message in Validation function module, I found that with in Validation module there is call for method cl_smw_mflow=>process_outbound
and with in Global class CL_SMW_MFLOW i performed a global search for this message and, there is attribute C_BDOCSTATE_ERRVALI which is responsible for the error.
and this is being set on condition partial upload allowed or not.
If someone have any idea about this, please response..
Or else if someone knows if there is any possibilty to debug the code during initial upload that could help me alot..
Vijay

this is the BDoc error
this the error trace
and this is the BDocs msg error/receivers
thanks

Bdoc under the status - Bdoc validation error

Hi -
I have been working on replicating materials from R/3 to CRM. The replication was working fine. Then I decided to extend the Bdoc by adding custom fields on both r/3 and crm. On R/3 side I added new sub screen and maintained a Z-table for holding the values.
In CRM side I extended the product by assigning new set type and attributes.
On the R/3 side I'm pushing the data to Bdoc on the T_OTHER_INFO table using the BADI CRM0_200 - > pointing Function Module - Z_SEND_PROD_TO_CRM .
On the CRM side, I was using the BADI Product_customer2 and the method - MAP_R3_TO_CRM_MATERIAL. Here I'm able to find the values populated on the T_other_info table of the BDoc.
I'm Just passing these values to the cs_product_bdoc-data-zmatmas table and cs_product_bdoc-data-mnt_settype .
But once a material is changed on R/3 and when a Bdoc was trying to post, I'm getting a status for the Bdoc on CRM as - BDoc validation error.
Do I need to activate anyother BADI's for enhancement of BDocs?
Thanks for your advise.
James...

Basically i understand your question as, you need to send Equipment status changes from R/3 to CRM. In R/3, you cannot create BDOC.It only extracts the data and send the details as Queue. So Pls use FM CRS_EQUIPMENT_EXTRACT to send the data as queue. In CRM it will create BDOC and do the necessary posting.

Documentation for BDoc BUS_TRANS_MSG

Hello everybody,
we wonder where to find a documentation for BDoc
BUS_TRANS_MSG?
Can anybody tell us where we can find the documentation?
Thanks a lot
Regards Mario

not easy: there is no direct link between the segments and the tables for extended bdoc structures.
The easiest way that I know if is by checking out the fuctions that process the bdoc and follow the structures down to the API: most of the times there you can find an indication of the tables involved.
Michael.

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

BDOC - BUS_TRANS_MSG error in SMQ2 and SMW01

Similar Messages

Maybe you are looking for