BDoc Error :  Assignment of usage AD_DEFAULT to communication type TEL not

Hi ,
I got the below BDoc error with BDoc type : VEND_MAIN
    Error : Assignment of usage AD_DEFAULT to communication type TEL not unique
Thanks

We had a similiar issue with pushing vendors from R/3 > SNC.  I took all the entries out of but020 then used those address numbers to get a list of all the values in ADRCOMC.  In ADRCOMC there was a single entry whose HIGH_VALUE was 999 and that was causing the issue.  I went into the BP and manually deleted the Telephone & Email address of the BP then saved it.  I then went back in and re-created the tele & email address for the BP and that fixed he sequence error.
We have several other BP's that have an usually high consnumber and I'm not sure why.  Most of our BP have a connumber of 001, 002, 003,,, etc, howver there are some that have skipped a lot of numbers and gone straight from 12, 13, 991, 992.  This last example is what happened with our problem BP record.
After I manually changed the data I was able to process the inbound CIF.
I hope this helps.
Will Foster

Similar Messages

  • Vimeo video unable to connect. Error message says "video format or mime type is not supported.

    Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
    I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
    Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

    Hi,
    This seems to be a Firefox error:
    Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
    Kindly check if you are able to view the video on Vimeo.
    Also, try using another browser.
    Hope it helps,
    Sonam

  • Error in OAF page (Definition CLOSE_PO_FLAG of type Attribute not found)

    Hi All,
    In OAF, When we go to receive a requisition order, on that page for a column called PO Close, below this column in the value text, I am getting the below error:
    Error
    You have encountered an unexpected error. Please contact the System Administrator for assistance.
    Click here for exception details.
    About Previous Page
    When I click the here for exception details. I see the below error. What is this error. Any idea.
    =============
    oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: JBO-25002: Definition CLOSE_PO_FLAG of type Attribute not found
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:2946)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:2743)
         at oa_html._OA._jspService(_OA.java:101)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._OA._jspService(_OA.java:94)
    ===========
    Help greatly appreciated.
    Thanks
    Aman

    Hi JulianE.
    Looks good. But strange .Please bounce the middletier once and set the permissions of this file to 7777
    Thanks
    Sandeep

  • Error:storage location for material's valuation type does not exit

    create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

    Hi Yan,
    If no previous goods movements have been posted yet for the combination  of the relevant material, plant, storage location and valuation type  the physical inventory cannot be done.                                                                               
    The table MCHB is used for both batch managed materials and materials  with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.              
    When you create a valuation type in the material master, only the table  MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.                
    This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.                                                                               
    You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.                                                                               
    If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:                                                                               
    - make a goods receipt (561)==> then the stock segment will be created           
    - make the reversal of the goods receipt                                         
    - make the inventory.      
    Hope this can help
    Regards,
    Mauro

  • Error while doing usage decison using moment type 321

    Hi,
    I have created a batch by confirming process order
    (t code COR6). But when I do usage decision for this batch using transaction QA11, material stock from batch created by order gets transferred to new batch.
    When I checked material document, there is complimentory movement for batch created with process order.
    For ex.
    I have created batch 000400 by confirmation of process order.
    Batch stock is in quality stock. Now I want to move this stock to unrestricted, for this I did usage decision using transaction code QA11. After usage decision when I checked material documents then I found that there is only one movement for 321 movement for batch 000400 i.e. for debit no credit (that means there is no complimentary moment) & credit movement exists for new batch 000401 which is created by sytem itself.
    My requirement is that system should not create new batch for material posting while using moment type 321, it shoud post material stock to same batch after usage decision.
    It is urgent issue.

    In the SAP IMG configuration,
    Material Management ->Inventory Management and Physical Inventory -->Movement types --> Copy and Change Movement type(OMJJ)
    In the field screen, select movement type and then "321" and getinto the definition.
    Please verify the field "Create new batch" is empty.
    Other reason could be user-exit or custom code which during material movement does the new batch creation.
    Thanks,
    Srinivas Karri

  • BUPA_MAIN BDOC Error AM 605 - Assignment of usage & to communication type &

    Hi  Experts,
    In our ISU to CRM replication of the Business partner we are seeing lots of BDOC error AM 605 - Assignment of usage & to communication type & not unique.
    I have figured that the error occurs when the CONSNUMBER in the ADR* table reaches 999.  Therefore, no more entries can be added for the communication type (ie another phone number) for that particular address number. 
    But the behaviour in our case is such that CONSNUMBER is reaching 999 by skiping many numbers ( i am not sure if thsi is the standard behavior or something is wrong), so its not the consistent behaviour. In some cases it suddely skips the CONSNUMBER range say which is at 400 for particular address number and goes to 990 range and reaches 999, the BDOC errors out.
    We applied note 1070798 - Repair the consnumber in communication tables.  The program Z_OSSNOTE_1070798 will be run to reorganize the consnumber, so no entry is at 999. Although this reorganies the number but this only acts as a fix after the error is already encountered.
    We still see the AM 605 error , can any one please suggest is there any way to avoid this BDOC Error from occuring. We see these error in case of organisation BPs having many addresses and their phone number in table ADR2 CONSNUMBER reaches 999.
    Immediate help is greatly appreciated.
    Thanks,
    Jessica

    Hi Jessica,
           Were you able to fix this issue of fill all required entries error?
         i have a same error with my project too.
      Yes, you know me. We worked in the same project earlier, now i am in this new project, where i get the same old error.
    Thanks
    Keerthi

  • Bdoc error : Plant IT01 is not assigned to any location

    Hi Experts,
    I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01.
    While downloading MATERIAL from r/3 to CRM, i am getting the following bdoc errors
    Plant IT01 is not assigned to any location
    Plant MS01 is not assigned to any location
    Since these do not exists in /nCRM_LOCMAP, i can see that i am getting this error. I have re downloaded DNL_PLANT & checked the status of completion as green. Still these two particular plants are missing.
    Also, when i checked the material [for which i am getting the bdoc error] in r/3, i can see that plants have maintained for that material.
    Is there anyway, to fix the issue?
    Appreciate if someone can suggest a solution on this.
    Thanks & Regards,

    Hi Chandrakant,
    There are no filters set for this object. Also, i took your suggestion, & created a BP with role plant & maintained the details in  /nCRM_LOCMAP. Reprocessed the bdoc's, & i am done, worked finally.
    Thanks a lot for your valueable solution. I have another issue in bdoc error which says " Check-digit in GTIN 00001216000000 (unit of measure KG) is invalid"
    This is the only one i am getting in /nsmw01 & almost in all the bdocs erros. I did search online, but have not got any suitable solution on this.
    Can you help me resolving this issue also?
    Thanks & Regards,

  • Transfer Posting error upon u201CQM Usage Decision with WM HUu201D

    Hello,
    I am switching from the SAP system u201CUsing MIGO with WM (no SU) and Inspection Lot processingu201D to a process using u201CInbound Delivery with WM-HU and Inspection Lot processingu201D.
    For e.g. I have a material with 10 pcs packed in one HU, PGRd and putaway. Inspection Lot is created for the HU containing 10 pcs. I am ideally hoping to do Posting change of 6 pcs to Unrestricted (with underlying mvmt typ 321) and Transfer Posting of 4 pcs to Qty. for Sample usage (with underlying mvmt typ 331).
    In QA11, when I select posting key u201CVMENGE01 To Unrestricted useu201D, I get the error message u201CHandling Unit is locked. No assignment possible. Message No. HUFUNCTIONS007u201D. (I donu2019t have any document open to cause locking).
    When I select posting key u201CVMENGE03 Qty. for Sample usageu201D, I get the error message u201CHandling Unit is locked. No assignment possible. Message No. QHU17u201D.
    Here is the status in u201CInspection Lot Stocku201D tab of QA11.
    u2022     Inspection Lot Qty.: 10 pcs
    u2022     Sample size: 4 pcs
    u2022     Status for u201CHU Transfer Postingu201D is Green
    I am currently doing GR first and then putaway. Though I am open to doing putaway and then do PGR, if that can help, in any way.
    Can anyone please help me with this issue? Please let me know if I need to provide more info. Thanks for your help in advance.

    hi
    I did GR for 10 PCs with serial numbers. During QM, when usage decision, in the tab "Inspection lot stock", I input 8 PCs to the unres, 2 to blocked stock.
    Upon posting, system pops up a Serial Number dialog showing "TF quality to unrest" with No. serial no is 10/8, and a list of 10 serial numbers.
    I select 8 serial to post to unres. But still, the system keeps having error "Exactly 8 serial numbers must be selected (instead of 10)"...
    This error is dur to
    You have selected 28 to U/r & rest you want to put to Block.
    so what system does is by default it will select first U/R qty which is 8.
    While stock posting it is showing 10 Sr numbers.out of which you have to select 8 for U/R.
    so only select those 2 numbers which you want to put to block...Click on delet(bucket)
    now only 8 will remain which you wnat to put to U/R.
    select all 8 and click on ok
    save.
    Rest of the 2 Sr number will automatically move to unrestricted.
    This is how sap in UD works for Sr nos.
    This will solve your problem.
    Regards
    Sujit

  • BPC 7.5 NW- error 'Name or password of RFC Communication user is invalid '

    Hi
    Environmen: Win 2008 R2, CPMBPC 7.5 SP09, BW 7.2 Sp09, .NET BPC 7.5 SP09
    I just completed installing .NET BPC 7.5 and when I try to open BPC Server manager, i get "cannot coonect to ABAP server' error.
    When I try to open the website http://localhost/osoft I get the error "name or password of RFC communication user is invalid".
    I see the same error in the BPC logs as well.
    I have the tried the following so far:
    1. Created single domain user for the three communication users BPC_sysadmin, BPC_admin & BPC_user.
    2. I momentarily changed to dialog users and logged in to check their fucntioning.
    3. I have generated their relevant profiles. Inlcuded SAP_ALL, SAP_NEW for the sysadmin ID
    4. I have disabled firewall, allowed port 80 on Windows firewall.
    5. I have disabled UAT
    6. I have followed the rest of the installation as per inst guide.
    When I run BPC server manager diagnostics, I see error "SAP ABAP server connection:database connection:status error".
    Can someone tell is there anything else that I could try ?
    many thanks
    Sreekanth

    Hi,
    If when you launch BPC Server Manager, you do not get "Cannot connect to ABAP server", this means user BPC_SYSADMIN is connecting correctly. And assuming you had invalid RFC user in BPC Web, your issue is then only with user BPC_USER (or BPC_ADMIN if the issue is with BPC Admin client only)
    If you do get that error, it means the error is for more than one user, so I would look for something big missing.
    In point 1 you mention domain users, make sure in BPC Server Manager under "reset login credentials" that you do not have windows users specified there as it's a common mistake, those should be your 3 BW communication users
    On BPC .Net server, if you installed SAP GUI, run an MDX_PARSER test in SM59 to check librfc32.dll is working correctly
    Also quite common issue it is possible your background users have wrong authorizations; in PFCG check the roles SAP_BPC_SYSADMIN SAP_BPC_ADMIN and SAP_BPC_USER were copied to customer namespace and that the role are active (user tab should be displaying green light) and assigned to the background communication users
    Also check the background users are not locked in SU01 (if they are locked the password saved on .Net server was or is not matching the real password defined on NW server)
    Thanks,
    Julien

  • Bdoc error status E02

    Hi Experts,
    In transaction BDoc monitor SMW01, the bdoc is showing in error state E02 (Partially send) and showing error "Personnel no. cannot be determined for Business partner xxxxxxxxxx". Please let me know how to resolve this error or tell me the step by step process to rectify this bdoc error.
    Thanks,
    Varun

    Hello Varun,
    You are getting this error  because the corresponding  persons do not exist in CRM with the corresponding personnel numbers
    mentioned in the Bdocs errors. These personnel numbers do not correspond to customers from R/3, but to employees which are assigned to R/3 customers via employee specific  partner functions.
    Now the HR specific employee master data should be synchronized between  R/3 and CRM first. In addition the HR integration must be active in your system so data for these employees is not rejected. You have information about it in the customizing documentation:
    IMG: Customer Relationship Management   > Master Data   > Business Partner   >  Integration Business Partner-Employee   >
    Set Up Integration With HR.
    You have to synchronise the HR and CRM data, this note 550055 contains necessary information.
    thanks
    Willie

  • BDOC error while customer activation in MDG

    Hi,
    We are using CRM integration scenario. MDG customer change request is getting triggered from CRM. During final activation we are getting this BDOC error 'UPD_IN_MI_BACK1 00505630006D1ED3B6E812B2E35D2E29TEL007AD_DEFAULT99 TEL007AD_HOME   9999123123595920140514000000X XXXXXXI'. We have referred the note 1240916 but couldn't point out anything. There is one more correction note 1076996 whose corrections are not in our system. If someone faced the same problem please help.
    Thanks in Advance,
    Jitendra

    I am facing similar problem in the 0FIAP_O03 ODS.
    One particular value 'CC ·µÐ¼þ' for field 0REF_DOC_NO gives error in Activation.0REF_DOC_NUM does not have any masterdata but the SID table is exists. We have ALL_CAPITAL in RSKC.
    One strage observation was when I tried loading this value[value copied from the error message in a PSA] in Developement Box it was successfull.
    I Do not understand if I am missing some setting in Production.
    The Errors are
    BRAIN 60  Value 'CC ·µÐ¼þ' (hex. '434320B7B5D0ADBCFE') of characteristic 0REF_DOC_NO contains invalid charact
    RSDRO 303 Error when assigning SID (details in long text) 
    The SID did not get created in Prod but was created in Dev. ODS is available for reporting and it has to remain such.
    If you have any Insights please help me as well.

  • Unable to open database : error , ora-03113 end of file communication

    Hi Guys ,
    I am facing a serious issue with my database
    machine Oracle Linux Tikanga 5
    database : 10.2.0.1
    Error : ora-03113
    I was trying to drop a logfile , while inserting the data ....
    I restored and tried recovering it but it recovers with message , media recover complete but doesnot allows to open the database
    gives the same error : Error : ora-03113 end of file communication
    alert_log shows
    alter database recover if needed
    start
    Media Recovery Start
    ORA-264 signalled during: alter database recover if needed
    start
    Wed Jan 9 16:20:18 2013
    db_recovery_file_dest_size of 2048 MB is 40.79% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Wed Jan 9 16:22:02 2013
    alter database recover datafile list clear
    Wed Jan 9 16:22:02 2013
    Completed: alter database recover datafile list clear
    Wed Jan 9 16:22:02 2013
    alter database recover datafile list
    1 , 2 , 3 , 4 , 5
    Completed: alter database recover datafile list
    1 , 2 , 3 , 4 , 5
    Wed Jan 9 16:22:02 2013
    alter database recover if needed
    start
    Media Recovery Start
    ORA-264 signalled during: alter database recover if needed
    start
    Wed Jan 9 16:22:07 2013
    alter database open
    Wed Jan 9 16:22:07 2013
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=16, OS id=2049
    Wed Jan 9 16:22:07 2013
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=17, OS id=2051
    Wed Jan 9 16:22:07 2013
    Repairing half complete open of thread 1
    Wed Jan 9 16:22:07 2013
    Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
    ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
    Wed Jan 9 16:22:08 2013
    Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
    ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
    LGWR: terminating instance due to error 470
    Instance terminated by LGWR, pid = 1966
    can you please suggest on the same ..
    Thanks

    Due to the nature of the error and to prevent any trial-and-error, I would highly recommand you to open a service request with Oracle asap.
    Oracle too recommands the same.
    Thanks...

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

  • Error while saving Communication type

    Hi All,
    I want to send order confirmation via email. So, when I am setting up communication strategy , I have the error message TK455 when creating or modifying a communication types in communication strategy.
    The first field is named "Position" and is a 'numc' type field.
    I tried to give 1 or 01 but it keeps giving error message
    "Enter numeric values only"
    The detailed error description is:
    Message no. TK455
    Diagnosis
    The value " " was entered in the field "POS".
    This is not possible because it is a numeric field where only numbers may be entered.
    The length of the field is 000002.
    System Response
    The entry was not accepted.
    Procedure
    Enter only numeric values in this field.
    I couldn't find any information relating to this is OSS notes.
    If anybody has the solution, I'm interested.
    Thanks in advance
    Sonali

    Hello,
    please can you told us how did you solve it, i have the same problem ?
    regards,

  • Initial Load of IS-U business partners to CRM - bdoc error

    Hi Gurus,
    i try to do an initial download from R/3 IS-U to CRM. Several objects from customizing have already been downloaded successfully. When downloading the business partners i get a bdoc error message for every single BP saying that
    'business partner role MKK is not available' Number R1206
    I figured out that the business partners in IS-U do have that role 'Contract partner' (which is technical 'MKK') and that data is maintained there. I also checked CRM and figured out that a business partner role 'contract partner' is not available there.
    Should i create it manually?? It is nowhere mentioned that a CRM role 'contract partner' should be created manually. Shouldn't the middleware do that? I found a document on service marketplace called 'IS-U specifics on the setup and load guide for the business partners' where i can read:
    'Sold-to-parties in CRM are replicated as contract partners in the OLTP system and vice versa'
    Does that mean that this mapping of roles is hardcoded? Is it customizeable? Does somenone know where to customize the mapping of business partner roles?
    Thank you
    Edited by: sapgipsy on Mar 19, 2010 4:21 PM
    Edited by: sapgipsy on Mar 19, 2010 4:22 PM

    Looks like as if you haven't activated the IS-U specific FM "COM_BUPA_MWX_BPS_FILL_ISU" in the BP middleware framework where the conversion between the IS-U role "MKK" and the CRM role "CRM000" takes place:
    Check via SM30 table com_bupa_call_fu in the IS-U system if the above FM is activated.
    Regards,
    Alexander

Maybe you are looking for