Bdoc error for ACTIVITY_OBJECT and TERRHIER_WRITE

Hi,
In the transaction SMW01, the Bdoc ACTIVITY_OBJECT is in intermediate state. When I try to reprocess it, it gets failed. I'm confused on whether I can delete it and move ahead. Also we have error in the Bdoc TERRHIER_WRITE where the description is shown as " Partially send; receivers have errors". In the long text of the error, it is shown as " Sending of an empty message is not possible" . Can anyone please help me out in resovling these errors?
Regards,
Rasmi.

Hi,
Thanks for the reply.
In the long text of the error Bdoc TERRHIER_WRITE, it is shown as An empty message is passed on to the Outbound adapter. But when we try to see the data part, it shows values in the TERRHIER column. But as on solution front it is mentioned in the Long text that Determine the component that sent the empty message. Report the error to the owner of that component.Determine what the message content should have been. Possibly the system, in which the change was originated, and the receiver system may be desynchronized. You need to synchronize the data between the systems.".
Please let me know if you have any idea on this.
Regards,
Rasmi.

Similar Messages

  • ERROR -- Checksum error for Hidden and Protected item ID

    Hello all,
    I usually get the error:
    Checksum error for Hidden and Protected item ID (10785219011206310), value (on), posted checksum (C1DEF33B4C8D57845151B7D18363B3D7), expected checksum (********************************), index_i (3), index_j (2), index_m (1);
    I have already found one thread with this question - Checksum error for Hidden and Protected item ID
    but there are no answers to this problem.
    Any thoughts how to solve this and what is causing it??
    Regards Pedro.

    Pedro,
    Read under the improved security section in the below article.
    http://www.oracle.com/technology/products/database/application_express/html/3.1_new_features.html
    I used to receive the same error because I was trying to update the value of the hidden and protected item on the same page repeatedly.
    I changed the item type to hidden to avoid the error.
    Hope this helps,
    Dippy

  • Checksum error for Hidden and Protected item ID

    Hi,
    I created an icon which is called 'Find an employee'. When a clicked on that icon, it shows employee id and employee name. And near these names there is a select button. But, it gives the following error:
    Checksum error for Hidden and Protected item ID (1558647128276141385), value (KING ), posted checksum (3F6EC88428199012945F76490A29168B), expected checksum (********************************), index_i (4), index_j (3), index_m (3);
    Is there anyone who knows the reason of this error?
    Regards,
    Edited by: user13385266 on 23-Jul-2010 06:00

    Erro Checksum error for Hidden and Protected item ID (1118508917223363)
    Edited by: taylor gao on 2011-1-13 下午6:26

  • Checksum error for Hidden and Protected item

    I have a region with 3 items - a Text field, a Text area and a Hidden and Protected item. When clicking on the save button the record should be written to the table. However I get the following error:
    ++Checksum error for Hidden and Protected item ID (7676217916943303), value (), posted checksum (1060941776BCEA7DDAE813A442DF01E3), expected checksum (********************************), index_i (8), index_j (1), index_m (3);++
    When I change the hidden and protected field to a regular text field I am able to successfully process the page.
    Do I have to do anything different when I have a hidden and protected field? Would appreciate any suggestions/comments to help resolve this issue.
    Regards,
    Ghazi

    If you have client-side code that changes the value of a "Hidden and Protected" item after the item/value has been emitted to the page by Application Express, you need to change the item type to Hidden, instead.
    Scott

  • No sound in Browsers and low memory errors for Snood and Ultimate Solitaire

    No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
    thanks

    No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
    thanks

  • Solved: checksum error for hidden and protected item ID

    hi all,
    I have 3 tabs namely search,create and reports.
    when i move from
    search to create ----> works fine
    search to reports----> works fine
    create to reports ---> works fine
    create to search ---> works fine
    but after comming to reports tab when i click to any of the tabs
    error occurrs as follows
    Checksum error for Hidden and Protected item ID (5322228830115090), value (R4897903101326173), posted checksum (A2328AA561179133CD115ABB81EB0333), expected checksum (********************************), index_i (2), index_j (1), index_m (1);
    Please could any guide me to rectify this error?
    Note: This error happened after i copied a report from the create page to the report page. and that report page is having an hidden item.
    Thanks in advance
    bye Srikavi

    Hi all,
    i changed the hidden and protected item as hidden.
    Works fine.
    but, a question if it is hidden and protected item what should be the solution?
    why this kind of error occured?
    bye
    Srikavi

  • Erro Checksum error for Hidden and Protected item ID (1118508917223363)

    i am generating one report with delete option.For delete Link i am using one HIdden item P1_SELECT
    when i select it with text field then no error.but when i select it hidden then it show me
    Checksum error for Hidden and Protected item ID (1118508917223363), value (2), posted checksum (C4733DF9C658202B914CF661E2349FFC), expected checksum (********************************), index_i (6), index_j (4), index_m (4);How can i remove this error.
    Thanks

    Hi,
    The problem is when you are creating an item "Hidden and protected" so apex will associate a checksum value for that item's value and as you are changing the value, the checksum will not changed.
    If there is no security issue use "Hidden" instead of "Hidden and protected" for that item.
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • RFC connection error for PS_ACCESS_1 and PS_ACCESS_2

    dear all,
    i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving  'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
    am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
    regards,
    vicky.

    HI,
    please check the RFC Trace File at SM59 -> RFC -> Show trace file.
    For better tracing delete the Trace File first and recheck the RFC Dest.
    Regards,
    Gordon

  • ABAP runtime error for 0CRM_OPPT_H and I while running RSA3

    hello Gurus,
         I'm having problems while running RSA3 transaction for these data sources.
    0CRM_OPPT_H
    0CRM_OPPT_I
    0CRM_SALES_ACT_1
    0CRM_SALES_ACT_I.
    I'm getting ABAP runtime error for these.
    This is the error:
    Runtime Error          CALL_FUNCTION_CONFLICT_TAB_TYP
    Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE
    I tried finding OSS notes for these, but I didn’t succeed.
    I activated the data source from RSA5, and then I tried RSA3. That time I got “Errors occurred during extraction”.
    After that I activated delta at BWA5, then I started getting runtime error.
    Even though I activated at BWA5, I am not able to see the data sources at BWA7.
    Am I missing any thing…please guide me through this….
    Thanks
    RKR

    Thanks for your replay... All the DS and related tables are active..
    But wen I tried to re-generate the DS again... this is the warning I'm getting... Any idea why I'm getting this....
    The even-numbered length of the DEC field SAMPLE_QTY_ALLOW can lead to problems
    <b>Message no. R8569</b>
    <b>Diagnosis</b>
    You want to use the field SAMPLE_QTY_ALLOW in the extract structure for DataSource 0CRM_OPPT_I. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
    This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
    <b>Procedure</b>
    This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
    More information and a remedy can be found in SAP Note 641744.
    When I search the OSS note, SAP suggesting to apply 883310 note.
    In my company we are using CRM 4.0 servie pak8. SAP suggsting to install service pak 11, but my client is not interested to upgrade to 11 as CRM people are working on service pak 8.
    By any chance we can use specific note which change the ABAP code to solve this problem... Please give me some suggetions...
    Thanks
    RKR

  • Error for /557 and /558

    Dear Experts,
    I have an issues for one employee with /557 and /558. When I run simulation for the period 01/01/2011 to 31/03/2011 it's getting error on final net processing and error is /558 Balance of Payment's. But when I run for 01/04/2011 and above the system is working correctly.
    I could not able to understand why it's showing error for these period.
    Please guide me to solve this issues.
    Regards
    Chandra

    hi,
    please follow the below inforamtion
    the amount from wage type /562 (Balance of net pay) is stored in wage
    type /557 (Cash payment).
    If the payment method specified is a bank transfer, you must determine whether this is the first payment run in this payroll period. If this is a repeated payment run and the bank transfer checkbox was flagged for the first payment run when the DME program was started, the amount from wage type /562 (Balance of net pay) is stored in wage type /558(Payment
    of balance). If this is not the case, the system creates wage type /559 (Bank transfer).
    maintain the infotype 0009 and check once.
    let us know the result,
    cheers
    mohammed

  • Conflictin​g device error for keyboard and touch pad on thinkpad laptop

    Hello,
    IBM Thinkpad T43
    1875
    Windows XP (SP3)
    Keyboard and touch pad completely do not work in Windows.
    They do work in BIOS.
    Tried connecting external USB keyboard.  They also does not work
    Getting Conflicting Device error in Device Manager for keyboard and touch pad
    exclamation point is on the keyboard device.
    getting Error Code 10 on keyboard.
    I cant go to a prior restore point.  That does not work.
    tried uninstalling them, that didn't work either.
    can't change auto configuration...it is grayed out.
    Please help.
    What can I do?

    This is really strange I must say...
    But you say you are using the same drivers for both 32-bit and 64-bit, this shouldn't affect the PE-part, but make sure you are using the correct drivers 64-bit for x64 OS and 32-bit for x86 :)
    If you make a bootable memmory stick from the 32-bit deployment share, does it work then or is it the same problem?
    Could it be as easy that the deployment share isn't updated?
    //Andreas
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin
    I also said that nothing's missing so, I thought it implies that only correct drivers are there.
    I filter out all unwanted versions from both deployment shares to save on disk space.
    Deployment Share have been refreshed several times with refreshing PE images too.
    Mem-stick for 32-bit version works fine - keyboard and touch-pad work in it.

  • SAP Query error for VBAK and KONV tables

    Dear Experts,
    Want to create SAP Query for below requirement but faced some error
    Step1) Extract the data from VBAK table w.r.t.  order type ,  Sale org and date range
    and collected the Sales order numbers and doc. condition record (KNUMV)
    Step 2)In table KONV (Transactional condition record data) in this table provided input as doc. condition record (KNUMV) with respect to condition type ABCD
    Manually i extracted data, there is no problem .
    But customer want to generate SAP Query for above requirement
    I tried to create but in t.code  SQ02 when i tried to join the table VBAK and KONV i faced the below error
    Table KONV cannot be used in a join.
    How  can I create SAP query for above requirement ???
    if its not possible then create Z report is the only solution ??????
    Thanks in advance

    Hello
    You can not create Query report with joining KONV. But there is one solution for your problem. You can create Query report by using Database VAV. In this logical database you will find all SD tables and also KONV. Use only those tables and fields which you want in your query report. I have checked this and its working
    Please try this and update the forum accordingly.
    Edited by: moazzamjii on Jun 30, 2011 12:13 PM

  • "Application can't be found" error for files and folders

    This has become mind boggling for me.
    Starting last week, files I've created (namely in either Adobe Photoshop CS5 or Illustrator CS5) have started giving me "Application can't be found" errors when trying to open them. They show up when I use spotlight to search for the file, but they don't show up in Finder and can't be found when trying to browse for them via the apps used to create them.
    Now I can't open a particular folder either (same symptoms and errors as above), which should have nothing to do with any applications.
    Have rebooted numerous times and am up to date on all firmware. I know these files exist and did work at one point because I uploaded them to be printed last week with no issues. But sometime between now and then (and I haven't touched them since) they decided to stop working. Please help!

    I am annoyed by, I think, the same problem.  I would like to drag Pages files directly to the finder in the dock, but now with Mavericks I can not do this.  It is bothersome to have to click on the finder to open it up when I did not have to do that with the old operating system.  I hope someone can help us both out. 
    I also hope that in the next update Apple addresses the concerns many are having with the newest version of Pages.  Until something is changed, I am sticking with old Pages because I find it to be a much better program to use.  

  • Showing Keyfigures  error for result and overall result in the Query output

    Hi All,
    when executing  query results show correct figures for qty & value but with ERROR  instead of uom(Unit of Measurement) & currency;
    Can anybody help?
    Rgds,
    C.V.

    Hi There,
    Try checking that the particular UOM and currency u are reporting is loaded into BW or not.
    hope it helps,
    Regards,
    Parth.

  • TechComm2: 9004 error for FM and 'stopped working' error for RH8

    I have been running the demo versions of FM9 and RH8 under Windows 7 for three weeks with no problems - for no apparent reason both apps stopped working this afternoon.
    'Internal Error 9004, 6919244, 9675646, 0. FrameMaker has detected a serious problem and must quit.' error at the Localization phase when launching FM.
    'Adobe RoboHelp 8 has stopped working' at the Loading Components phase when launching RoboHelp.
    I uninstalled and reinstalled the applications with no change.
    Any ideas?
    Coincidentally, I purchased and registered the TechCommSuite 2 upgrade this morning, about two hours before this mess started. I have a documentation and Online Help project due today - what a mess.

    Pieter,
    Simply navigate to c:\users\your name\AppData\Roaming\Adobe and rename the 'Linguistics' folder (Framemaker should NOT be running - otherwise, the folder will be write locked and unable to be modified). As a precaution against doing more damage to my installation I renamed the 'Linguistics' folder instead of deleting the folder (for example, Linguistics.bak). When Framemaker opened it automatically recreated the 'Linguistics' folder as well as the dictionaries, at which point I deleted 'Linguistics.bak'. Since then I have had no problems. By the way, I am running Windows 7; if you are running a pre-Vista version of the OS you will find your 'user' folder under c:\documents & settings. Good Luck.
    Thomas

Maybe you are looking for