BDoc not generated on CRM for delta

Hi,
i'm trying to load delta with data source 0CRM_SRV_PROCESS_H, delta has been succesfully initialized from BW, and all the initialization data has been loaded, i can now see the queue on RSA7 on CRM.
Now when i create a new service on CRM the BDoc (type BUS_TRANS_MSG) is no created on transaction SMW01.
Am i missing any setup process ?
thx
JP

Now... i can see the new BDocs on transaction SMW02, but are all yellow (state I02). Why aren't they taked to the queue ?
If i hit "Reprocess BDoc Message" it is taked sucessfully to the queue. Why is it necesary ?

Similar Messages

Bdocs not generated

Hi,
I have created a sales order on a stand- alone CRM box and intend to capture the order data in a Bdoc, but no Bdocs are getting generated.
Can some of you help me with this. I have attached a particular action profile with the transaction type attcahed to Sales Order transaction. Here the sending of Bdocs has been scheduled automatic. When i create and save a sales order, I get a green (success) traffic light for 'Bdocs sent' action and the corresponding log also displays success, but i am not able to see any Bdocs in SMW01.
Please let me know if you think I am missing out at some point.
Regards
Priyanka

Hi,
Have got the answer to it. For my system a BADI CRM_BUS20001_UPLOAD was deactivated because of which the BDocs were not generated.
Thanks for all ur help !!
Regards
Priyanka

F110 payment run completed but not generated all check for the payments

Do any one have an idea or the potential answer on my query
I've run F110 and generated one Payment all 45 open items for one vendor
Now after the print done only the first 20 items got into the check register, and left over the remaining 25 items
So my question is why system not generated the check for the remaining 25 items and what is the remedy

No all settings are available, but still the same situation the all checks are not generated for all items of the vendor open items clearing in the one payment documents
single vendor
single payment for all 25 open items
After print activity compelted
checks created for items 5
leftover items 20 not created check
can anyone tell why system is behaving like this

Fi Document is not generating in MIGO for multiple account assignment in PO

Hi,
I have have created asset po DG set 111 quanity is 4, i have created 4 different assets and assign quanity 1 to each dg sets in account assignment. While doing GRN system is not generating FI document for this po. if i am giving one quanity or single account assignment for as 4 then it is generating FI quantity.
PLease help me out why system is not generating FI document for multiple accont assignment in MIGO.
Thanks in advance
KISHORE

Hi
There is no option if you are not on EhP4... Do MIRO and see if the FI doc is generated
Only way is to do MIRO immediately after MIGO.. OR Schedule ERS (Evaluated Receipt Settlement) which runs every hour in the background so that MIRO is posted automatically based on MIGO document.... Basically, you have to do MIRO after MIGO.. Whether you do it manually or through ERS is a matter of choice
Regards
Ajay M

Call Function not Generating Function Module for Smartform

Hi Gurus,
We have a work copy print program use to print deliveries (smartforms). This program works fine in Production but right now we are doing some testing and I found out that when we run this program in QUALITY environtment, it shortdumps with error saying "Function Module Not Found"
Basically when it gets to the Function Module "SSF_FUNCTION_MODULE_NAME", it could not generate any function module for the form it Sy-Subrc = 2 Exception meaning NO_FUNCTION_MODULE.
The problem is this only happens in our QUALITY environment.I compare the function module in the 2 systems, there was not diff as this is a Standard SAP module. I passed diff smartforms we have in QUALITY through the FM and it will not generating any FM for any of them. So this is not an error from the smartforms, bcos all the same smartforms generates FM in Prod.
So what I did next is to Debug the FM "SSF_FUNCTION_MODULE_NAME" in the 2 systems to see where the diff is coming from. I noticed 2 views that the FM is using, they are STXFADM and D010SINF . So on the Production system, STXFADM-LASTDATE and D010SINF-UDAT fields are the same value, so it generates the FM. On the QUALITY systems, the values are different hence it skips the code to generate the FM.
Thanks Guys.
Points will greatly be awarded for this.

Please guys, help me look into this, I really need a solution fast.
Thanks

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

How to Force JHS do not generate navigation cases for Groups?

Hello
I have already seen "Overwrite faces-config and navigation rules " property for Group in JhsApp deff .But It does not work .How Force JHS do not generate navigation cases for Groups? and another question is that how can I customize navigation case generation in JheadStart?
Thanks

Hi,
You are right: the navigation rules in the main faces-config file are overwritten, even if you uncheck these flags. Here is the solution:
If you want to preserve some of the navigation rules in the main faces config: alter the velocity template for faces-config. You can only switch off the entire generation of faces-config.xml; not individual parts.
If you want to add a special navigation rule: add it to the group faces config file.
If you want to preserve post-generation changes to the group faces config file: uncheck 'generate controller group?' or put it in the templates for that group.
Note: the flag 'Overwrite Faces-Config beans and Navigation Rules?' has become obsolete, you should only use 'Generate Controller Group?'.
Regards,
Evert-Jan de Bruin
JHeadstart Team

Could not generate stub objects for web service invocation in ColdFusion

I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.

Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
    <cfinvokeargument name="FromCurrency" value="EUR" />
    <cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 :     <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 :     <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden.

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Not getting the data for delta for 0ASSET_ATTR_TEXT in RSA3

Hi All
In RSA3, I am not able to extract the delta for the datasource ASSET_ATTR_TEXT. But when it is on full update then i am gettign the records, when i changed to "D" it is giving me the error 'Errors occurred during the extraction' and the error messege says
"Errors occurred during the extraction
Message no. RJ012
Diagnosis
During the extraction phase an error occurred for the extractor. An exception, 'error_passed_to_mess_handler' was triggered.
System Response
A more precise description of the error can be found in the log.
Procedure
Check the function module or the call from the extractor check program
Kindly provide some inputs on the same
Regards
Abhi

hi Siggi,
I have checked Datasource in the ROOSOURCE Table for this datasource the DELTA IS - AIE. And do did the Init from the BW i got 8210 recods.Then i executed the Delta Pack. there was an error happend.
But When i loaded Delta i got the error as :
Diagnosis
         Not all the initialization requests have been completed yet for this
    DataSource, or there may be an incorrect initialization request.
System response
No delta requests can be processed whilst there is an initialization
    request that has not been completed.
Procedure                                                     Wait until the initialization request has finished, or delete the entry
    for the incorrect initialization request from the corresponding display
    in the Scheduler.
Regards
Abhi

Income tax is not generating on Bonus for second time through off cycle

Dear All,
I have an issue related to bonus. We have given bonus off cycle in the month of August 16th income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
Let me know where it went wrong.
Rgds,
Prasad

Hi Narendra,
Thanx for the response, i tried the above but not generating WT/460. can you explain the logic.,
Changed BON5 to BON3
created new Tax code ZTDR from STDR
Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
didn't understand why /401 or MTDR or 9TDR
Thanks
Sanm

Condition records not generated in CRM from ECC

Hi all,
I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully.
I got all the condition types, access sequence and tables.including CUSXXX tables.
I have also got few condition records for condition types SAPXXX . I am not able to get the condition records for the CUSXXX tables.
Suggest me how to proceed further.
Regards
Yaswanth.K

Yes I have checked the SLG1. There were one error..
"No Entries Determined for the A Tables (Block 1)"
I am not able to judge how to proceed with that error.
The detailed Text is diapleyed under..
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Regards
Yaswanth.K

WL-7 / clientgen task do not generate correct bean for non built-in data type

The clientgen Ant task do not generate a correct JavaBean for this
complexeType definition (returned by a web service method):
extract from WSDL:
<s:complexType name="MyBoggusType">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded"
name="shouldBeAnArray" type="s0:OtherType " />
</s:sequence>
<s:attribute name="total" type="s:int" />
</s:complexType>
The generated JavaBean contains an int (for 'total') and a simple
reference to an OtherType instance (for 'shouldBeAnArray').
The 'shouldBeAnArray' attribute should be an array of OtherType?
What's wrong?
(The service is not implemented by me and I have few control on it)
Is it a bug or a limitation?
Should I write a Codec as a workaround?

On Wed, 05 Feb 2003 17:28:40 +0100, Stephane Boisson wrote:
Is it a bug or a limitation?
Should I write a Codec as a workaround?This is a bug. It has been fixed in service pack 2. Refer to CR082308
when contacting support if you need a patch against sp1. You could indeed
write your own codec but it might be easier to just use the patch :)
--Scott

Dac not generating paramter files for unspecified mapping in one workflow

Hi,
We are facing a problem with DAC while generating parameter files.I have a task in DAC which is calling a workflow(It contains two sessions,1.SILOS mapping,2.SILOS_UNSPECIFIED mapping).
Both are using the same parameter file.
During Development DAC used to generate parameters for both sessions in the same file.Both now in diff environment,it is generating parameters for the first session
and for unspecified mapping it is not generating any parameters.So unspecified mappings are failing.
Any one help?

Please check whether the file parameterfileDW.txt has the section for that unspecified workflow. If not please copy and paste from DEV env and restart the load.
If it exists in parameterfileDW.txt and still not not generating section for unspecified session in parameter file then try running the below command at <infa_home>\server\bin
pmrep listobjectdependencies -n <WORKFLOW_NAME> -o workflow -f <FOLDER_NAME> -d session -p children
and see whether the output as your unspecified session and post your observations.
Mark If Helps

Ejb3 entity bean not generating valid sql for postgres 8.1

Hello,
I originally posted this on the jboss seam board as I ran across this error on a seam test example, but it seems it's more generally applicable to ejb3 entity beans not generating sql that postgres can understand. I'll post my message below, all replies are appreciated.
I'm going through the hello world example from the seam book, and I'm getting an error I cannot resolve, that with an auto generated sql statement, that's not valid for postgres 8.1, the database I'm on. Here's my error:
17:40:31,370 INFO [STDOUT] Hibernate: select next value for person_id_seq from dual_person_id_seq
17:40:31,394 WARN [JDBCExceptionReporter] SQL Error: 0, SQLState: 42601
17:40:31,394 ERROR [JDBCExceptionReporter] ERROR: syntax error at or near "value"
17:40:31,396 FATAL [application] javax.ejb.EJBException: javax.persistence.PersistenceException: org.hibernate.exception.SQLGrammarException: could not get next sequence value
javax.faces.el.EvaluationException: javax.ejb.EJBException: javax.persistence.PersistenceException: org.hibernate.exception.SQLGrammarException: could not get next sequence value
Here's the table definition
- create table Person (id bigint not null, name varchar(255), primary key (id))
- create table dual_person_id_seq (zero integer)
- create sequence person_id_seq start with 1 increment by 1
and here's the entity bean:
@Entity
@Name("person")
@Table(name="person")
@SequenceGenerator(name="person_sequence", sequenceName="person_id_seq")
public class Person implements Serializable {
private long id;
private String name;
@Id
@GeneratedValue(strategy = GenerationType.SEQUENCE, generator="person_sequence")
public long getId() { return id;}
public void setId(long id) { this.id = id; }
public String getName() { return name; }
public void setName(String name) { this.name = name; }
How do I get it to generate a valid sql statement for postgres?

I think you should try putting the sequence generator annotation over the primary key field. Try it and be sure it works.
regards,
Michael

BDoc not generated on CRM for delta

Similar Messages

Maybe you are looking for