Bdoc - Partially send, receivers have errors.

Hi All,
There is Bdoc failure from CRM to R/3. When we looked into SMW01, the Bdoc atate is shown as 'Partially send, receivers have errors'. When clicked on button 'Bdoc Msg errors/ Recievers' , there are no errors displsyed. Only reciever details are shown. What could be the reason for Bdoc failure?
Regards,
Rajesh.

Thanks for the replies,
Chandra,
I have checked that 'Contents' button. It is in disabled mode. It looks like there are no errors.
Nicolus,
There are no dumps found in recievers system
Can you please tell me the significance of 'Show Bdoc Classic data' and 'Show Bdoc Ext data' buttons. Will they show us the data send to reciever through Bdoc? I have seen one field missing in the data shown in these screens. Where do we configure these Bdocs, I mean from where this data is fetched to send to reciever?
Thank you,
Regards,
Rajesh.

Similar Messages

  • Bdoc State: partially send, receivers have errors

    Hi,
    we have tried to change/edit the BP in CRM, which is created and downloaded from ECC.
    after the changes have been made, we have saved the BP, but it didn't get replicated in ECC and for the same BP a below Bdoc error has raised.
    BDOC Type : BUPA_MAIN
    Error: Business partner 0000300000 does not exist as customer, change not possible.
    But BP created as a referance customer in ECC. not understanding why system info telling does not as  exixt as customer.
    Please any help us in replicating this BP to ECC customer.
    Thanks,
    adi

    Hi Adi,
    I'd suggest you go through the sap note : 757955 and see if the relevant  entries for the CRMIN and CRMOU events are present . Also, if you use your own your own z modules please run the report mentioned in the note. ALso, make sure your ettings in PIDE on the R/3 side are correct.
    I hope that helps,
    Brian.

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • My iphone 5 is stuck on recovery mode and everytime i tried to restore it , it says that my phone have error -1, how can i fix it or should i send my phone to the appstore ?

    my iphone 5 is stuck on recovery mode and everytime i tried to restore it , it says that my phone have error -1, how can i fix it or should i send my phone to the appstore ?

    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    error code - 1
    and see here
    http://support.apple.com/kb/TS3694#error1

  • HT1688 my iphone 5 is stuck on the recovery mode and everytime i tried to restore it , it said that my phone have error 21, how can i fix it or send my phone to the appstore ?

    my iphone 5 is stuck on the recovery mode and everytime i tried to restore it , it said that my phone have error 21, how can i fix it or send my phone to the appstore ?

    Follow this one as well...
    http://support.apple.com/kb/TS3694

  • I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message.  I have tried deleting and restarting. I have tried shutting phone down completely and restarting.  no help...

    I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails.  "cannot send mail an error occurred delivering this message"...   i have tried to restart phone to no avail. I have tried to delete and re input account to no avail.  I need help

    Hello lclaunch22
    You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
    iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
    http://support.apple.com/kb/ht1694
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My Itunes wont open and windows will send out an error message

    Hello
    I was working with Itunes for a long time with no problem what so ever until suddenly yesterday when I opened it I recived an error message from windows saying the process has to close and will I want to send out an error report to windows.
    I went on to move my Itunes library and repair the Itunes via the downloaded installation file but when it did not work I uninstalled it completly and reinstalled it with no effect...
    If any one have any idea as to how to solve this pls help....
    thank you

    windows installer has stopped working
    a problem caused the program to stop working correctly.
    windows will close the program and notify you if a solution is avabilable.
    ... and that's one that I wasn't thinking of ...
    Head into your Windows Update. Are there any new updates available for you? If so, and you install, does that clear up the error message?

  • Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

    This is what is happening after installing 2010 on to a computer that was running 2007 Outlook.  Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
    error. Then a pop up dialog box comes up with the following error
    Receiving reported error (0x80004005): The operation failed
    Does anyone know how to fix this
    Nexusxox

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing. Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • My 4th gen. shuffle keeps on sending me an error message that it cannot connect with iTunes because it's not formatted properly.

    Hi,
    About two days ago my shuffle started to send me an error message that it cannot connect with iTunes because it's not formated properly.
    So I've already updated the softwer, I tried to use it with every single USB port on my computer and searched for solutions on the net but couldn't find any useful information...
    I literally see the following message: The iPod "194" cannot be used with iTunes because it is not formatted properly.
    Any ideas?....
    Thank you!

    If you cannot access the iPad because of the passcode, you have no choice but to restore it using the same steps that you would use if you forgot the passcode.
    iOS: Forgotten passcode or device disabled after entering ...

  • Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes

    The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
    Clearly state the Troubleshooting Steps you have tried to Resolve it

  • Sender Agreement Determination Error

    Hi Experts,
    I am getting an error while posting my message from RWB. the error details is below.
    Error While Sending Message: 500 Error during Sender Agreement Determination
    It is a HTTP to IDOC scenario so no need to determine the sender comm channel and sender agreement, so I have not done that
    but still the error persists. Please help me out. As, everything seems ok to me.
    Thanks and regards,
    Aniruddha

    Hi,
    If any ABAP Adapter is tested ideally if u post directly to IE it sholuld not through a error.
    Please check if u have any other interface with the same name and same BS, but have 1 sender agrement.
    If yes try to rename any1 of the two.
    Also refresh the once and try to test it again
    Babu

  • I cant restore mi iphone 5s, i have "error 1669" or "2005" please help meeeee

    few days ago i lost the signal of my phone by 2 min and the signal come back after 2 min again lose the signal and i decided to upgrade to 7.1.1 and i cant restore the iphone (5s) apple send an alert "error 2005" or "error 1669" please help me i dont know what to do
    i am from Cuenca Ecuador please help me and sorry for my english

    I don't have an answer, but your English is fine...

  • How to send Run time errors alerts to email ?

    Dear Friends,
    I am using SAP CRM ABAP 6.0. I am checking run time errors in ST22 transaction. Usually, i check in morning or evening, based on my free time. I feel, dificully in this. so, i need to configure in somewhere for send this runtime error alerts to my office mail id.
    We are sending report outputs to our office id. But, i dont know, how to send run time errors with log or with out log to emai id?
    thanks in advance.
    Rajagopal
    Chennai - INDIA

    Thanks Dieter.
    Now, i have set the background job as per your suggestions. but, i have below doubts:
    1. I added my office mail id in spool list receipient. This background job alert mail goes to business work place inbox (SBWP). But, i need, in my outlook mail box.
    2. This background job gives all months runtime errors. but, only i need today & yesterday only. I checked in ST22 for create variant. Unfortunately, i did not get option. so, how to set variant?
    Thanks in advance.
    Rajagopal
    Chennai - INDIA.

  • Cannot start widget - Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started

    Dear Experts .
    I'm trying to enable widget for my company db but getting the following error :
    Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
    I can connect to the B1iF locally and remotely .
    I have the db configured in the SLD and connects successfully .
    I have the event sender service and proxy started and configured for the company db.
    I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
    I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
    I've also tried to re-activate the xelcious from the B1iF->control.
    My Setup :
    I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
    I'm using B1iF as even forwarder for B1iSN.
    I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
    I would appreciate any input before removing B1iF completely and re-installing.
    Thanks in advance ,
    Nadav.

    Hi,
    The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
    Thanks,

  • Failed to send request/response to peer. send() failed with error code 32?

    hello, chris:
    recently we check the tterros.log, we found the following erros:
    2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
    2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
    2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
    2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
    what does these mean?? Does this have any effect on replication?? thank you ...

    These messages indicate a loss of connectivity between the replication agents. This could be due to one some kind of failure (e.g. network issue). If the messages are infrequent and replication is otherwise working okay they are not a big cause for concern though if I were you I would check the network etc. for anything abnormal.
    Chris

Maybe you are looking for

  • Need flash player 9 for mac os 10.5

    i am unable to download flash 10, so it recommended that for my system, which is mac os 10.5.8 with safari 4.0.2 i need flash player 9....but when i download the zip files from the archives i can't open it. am i missing something here or is the link

  • What is stored in a transaction log file?

    What does the transaction log file store? Is it the blocks of transactions to be executed, is it the snapshot of records before beginning the execution of a transaction or is it just the statements found in a transaction block? Please advice. mayoora

  • Re activating script after stop();

    How do I stop a script from running, or remove it from a swf at a specific frame, (on its own layer "actions") and then start it again, or script it again on another frame further down the timeline? If I try and put the same script on another layer,

  • No email confirmation??

    I ordered my iphone5s last friday and have yet to get an email confirmation that it said I would receive in 24 hours of purchase. Help?

  • Oracle Pl/Sql table question..

    Hi guys, I have an Oracle PL/SQL question. I don't know which board can i ask it. This is why i am asking here. I declare a PL/SQL table(traditional array), and populate it in a session. Another user logged on with another session and wanted to acces