BDoc's not created when downloading certain partners

Hi,
we have a problem when downloading certain partners from R/3.
Adapter Object CUSTOMER_MAIN
Source Site: ECC 6.0
Target Site: CRM 2007
For certain partners, BDocs are regularly created, for some the status is "OK - green" in R3AR but when trying to search for BDocs there is a message "No BDocs found for this Request / Initial Load".
Clearly the partners are not created and present in BP.
Anyone encountered this error?
Thank you

Hi,
If there is a valication error or an error in update task at the CRM system, the BDocs shoudl ideally be in interrmediate state.
However you can still search for entries in transaction sm13 to check if there are any update failures. Also make sure that
you are not searching for only fully processed BDoc in smw01.
If none of the above holds good, there would be some sysfail for R3AI_BUPA* in smq2. Please check the above. If still in doubt, reply back.
Best Regards,
Shourav

Similar Messages

I get Server error 404 not found when downloading OSX LIONHELP

I get Server error 404 not found when downloading OSX LION HELP!!!

See message 11600
"David R. Pina" <[email protected]> wrote:
>
Hello everyone,
I'm using weblogic 6.0 for AIX.
I'm trying to setup a new web application.
Right now, I just want to access html files, but the web server is not working
well.
I can access the file
http://myhost/myapp/index.html
but if I try to access file2.html
http://myhost/myapp/file2.html
file2.html is in the same directory, with the same permissions and I get
the 404
error message
At the beginning, I couldn't access index.html, because I created the directory
"myapp"
with user "root". Later, I changed the ownership to "wlowner" for "myapp"
directory
and for "index.html"
Then I created "file2.html" with user "wlowner", and provided the same permissions
as index.html but I can't access it.
Could someone tell what might be wrong ?
Any clues ?
Thanks,
David
Mexico City

A passcode was not created when ipad mini 3 was first set up however it is now locked and asking for a passcode. What to do?

A passcode was not created when we first set up my son's ipad mini 3 however the ipad is now locked for some reason and asking for a passcode. What do we do?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

HTTP logs not created when using software load balancer

This is my setup:
1. I have a server running a software load balancer - call it A
2. There are two servers clustered under A - call it X and Y
3. I am able to access the application deployed on X and Y through A.
Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
Problem is:
Let us take server X.
$ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
however has an error log.)
Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
Specifics on the setup:
1. A, X, Y - all three are OAS 10.1.3.2
2. All three are deployed on individual server machines
3. All three servers have one OC4J instance each running in them
4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
5. This *.war file is deployed on A
6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
Has anybody encountered this problem before? Or is there anything wrong
with the setup? What is the resolution for the same?
Any help is greatly appreciated.
Thank you.

Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
While the logs are not critical to the component we are working on, was just wondering why they were not being created.
As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

Keynote software update (5.1.1) not opening when downloaded

The Keynote software update (5.1.1) not opening when downloaded.
It is telling me that "An eligible Keynote application was not found in the location /Applications/iWork '09."
I have downloaded this program from the App Store and do not have the iWorks 9 Suite.
Any ideas how to install this update? Thx.

I'm having the exact same problem. I had iWork '08 and then purchased Pages, Numbers and Keynote from the AppStore. Now I don't have an iWork '09 folder. The Pages and Numbers apps show installed, but the Keynote doesn't. Holding my breath, I went to purchase Keynote again (didn't want to pay the $20 a second time) and it comes up with the notice that it is already installed. But the new update does not show up in AppStore. Went to the website to download the update direct and when I go to install it, a warning comes up that there is no iWork '09 file in my Applications.

My security answers are not accepted when downloading movies. Why

My security answers are not accepted when downloading movies.TRIED restting the security question that did not work. Called apple support --- no help.
I'm at a lost PLEASE HELP

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

ITunes is not letting me download certain songs. Keeps saying "Could not purchase "name of song." An unknown error occured (5002). It let me buy 1 song, afterwards it didn't let me buy any. I checked my credit card info, and it's still not working. Help!

iTunes is not letting me download certain songs from my phone or my computer. Keeps saying "Could not purchase "name of song." An unknown error occured (5002). It let me buy 1 song, afterwards it didn't let me buy any. I checked my credit card info, and my password is correct. and it's still not working. Help Please!

I'm having the same problem on iPhone 5 and iPad.

Contract Version not created when WK Contract (target value) is changed.

Hi there,
Problem with the Version Management on a WK Contract.
When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
We receive the following message when we change the targ. value:
"No new version created because a message has not yet been transferred"= Message 027
Can anyone help or advise?
Many thx.

We receive the message on some of the contracts.
Therefore it can't be due to the output

Business partner not created when User is intergrated in SRM org Structure

Hi SRM gurus,
A new users in integrated into the SRM org structure thro Z tcode ,business partner is not created.
the user is not able to create shopping cart.
When we try to check for t.code:BBP_BP_OM_INTEGRATE we are getting this error"
Connection of object us XXXXXX to object u2018CPu2019 is not unique"
how to resolve this error.
Regards
G.Ganesh kumar

Hi all,
1) I have checked the SLG1 -No error log is found
2) In the basic tab there is no details to enter.
I am getting this error"Missing Authorisation : info type 1001 ,object type BP,Subtype A207".
since it is Production system -can we run run PFAL directly
G.Ganesh Kumar

Spool not creating when executing in background

Hi All
When i try to execute background printing for transaction code MCBA, system is finishing the job but not creating the spool. But for other transactions it is creating the spool corectly.
Please Advice.
Thanks
Ravindra Suvarna

Hi ravindra,
1. U are right.
2. The output does not come when we run this
   in background.
3. The reason in the program for mcba.
4. Its program name is :
   RMCB0100
5. inside this there is one include RMCS00AL
6. Which has the condition
   <b>IF SY-BATCH</b>
(for background detecting)
7. Now what it does afterwords, i could not detect,
but
8. This program DOES SOMETHING / DOES NOT DO SOMETHING
   specially for BACKGROUND PROCESS,
   BY DETECTING IT THRU
   SY-BATCH.
regards,
amit m.

Video Sidecar Files (.THM) Not Created When Video Exported As Original - They should be.

When exporting video as in it's original format the .THM sidecar file (which contains all the relavent metadata for the video) should be included so that other programs (or even Lightroom itself if using the Add to This Catalog option during export) can have access to the metadata for the video.
Here is my use case:
After importing the original video clips I would like to do the following to keep my footage clean and conserve space (as we all know HD video eats a LOT of space)
1. Trim excess / unneeded footage from the clip
2. Export the clip in it's original format with a new name (such as MVI_1234_trimmed.mov) and have it added back to the catalog during the export process.
3. Delete the original clip containing the unneeded footage.
This workflow is almost perfect in the initial LR 4 beta release except that a copy of the .THM file is not included when the video is exported. This means the new clip will not contain any metadata when added to LR or presumabley other applications. I can manuall get around this by duplicating the original .THM file and renaming the duplicate to match the name of the new trimmed clip (example MVI_1234_trimmed.THM) then manually importing into Lightroom. However this breaks the almost perfect workflow and increases time and room for error. It would no longer be an automated process which could easily be applied to clips in bulk.
Please have LR create the sidecar file with when exporting in original format or at least have an option for it!

The proposed workflow may not be valid based on the discussion here: http://forums.adobe.com/thread/947245?tstart=0 but the sidecar file point still is. Exporting as H.264 does not preserve metadata either. LR shows no camera / exposure / date time information for the H.264 version.

Version Set is not created when editing with Photoshop CS4?

Last week I was working in PSE7 and opening files into PS CS4 for editing. I open the files by clicking the Open with link and choose Photoshop. I edited several dozen photos and when I closed them from PS CS4 Version Sets were created in PSE7 like they should be. At some point that stopped happening. Now when I do as before and open the files into PS CS4, edit them, and then close them the Version Set is not being created in PSE7. I look in the folder containing the files and the file has a new modified date but it still has the same file name instead of being saved with the - edited name as before. Does anyone know why the version sets are no longer being created when editing with PS CS4? I can edit the files with the PSE7 editor and the version sets are created as they should be. Thanks!

Okay so tha there is no misunderstanding here is exactly what I'm doing. From the PSE7 Organizer I select a photo (file name Tetons & Jenny Lake 026.jpg) and click the Fix tab. I then click More Options and select Photoshop. The photo opens in into PS CS4. I make my edits click the x on the tab to close the image and I'm asked "Save changes to the Adobe Photoshop document "Tetons & Jenny Lake 026_edited-1.jpg" before closing?" I click Yes then click OK to save the image at maximum quality. I go back to the PSE 7 Organizer and there is no version set. I check the folder the original image was in and see the original file Tetons & Jenny Lake 026.jpg with a new modified date and time. I can even choose Save As from PS CS4 and it asks me if I want to overwrite Tetons & Jenny Lake 026_edited-1.jpg and I select Yes, but I get the exact same results. Thanks!

ERP Delivery not created when triggered from TM

Hello Experts,
I have a OTR & Freight Order created in TM successfully. Could also assign a carrier to it. From the Freight order Management screen when the Send Delivery proposals to ERP, the system sends a XML message that is successful in TM. But in ERP there are no deliveries created. I could not see any error in the Queues or the XML messaged.
My observation is there is no XML message in ERP system for the delivery creation.
Could anyone throw some light on why the deliveries are not created?
Regards,
Vasu

Thanks Marcelo,
I missed to check the PI system, the message was stuck there since the mapping was missing in PI.
Regards,
Vasu

Alv Icon not displaying when download to local directory

Dear All,
I have ALV report sent THROUGH email . When i had download the report to local directory . I am unable to see the Icons like block , in the report .
Thanks,
Sridhar

Hi Sridhar,
The icons are only displayed by the SAPGUI. In the report data they are only something like @1F@... - which then is interpreted by the SAPGUI.
When downloading the report the internal data is downloaded, but no SAPGUI will interpret them any longer (since you are not using SAPGUI to view the downloaded data).
So in conclusion it is not possible to see those items. If you want to download the report you should avoid the usage of icons.
Regards,
Gerd Rother

I get error "audio format not compatable" when downloading music from the itunes store

I get error "audio format not compatable" when syncing ipod classic. Music purchased from itunes store.

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

BDoc's not created when downloading certain partners

Similar Messages

Maybe you are looking for