Bdocs are in intermediate state I01

Hi all,
When I checked SMW02 transaction,some bdocs are in intermediate state I01.
I tried to reproces, but it's giving shortdump.
Shortdump is trying to insert table entries, already exist.
Bdoc type - CND_M_SUP
someone could help me how to clear these Intermediate bdocs.
Thanks in advance,
P.V

Hi all,
I did not find anything in the condition log but this is the description of my short dump:
Error analysis
    Short text of error message:
    Error in mass insert in table CNLCRMPRSCALEDIM.
    Long text of error message:
     Diagnosis
         You tried to insert entries in the database table CNLCRMPRSCALEDIM.
         This operation failed because one or more entries with the
         specified key already exist in the table.
     System Response
     Procedure
         Inform your support organization.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "/SAPCND/DB_ACCESS"
    Number.............. 002
    Variable 1.......... "CNLCRMPRSCALEDIM"
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Regards
André

Similar Messages

  • BUPA_REL bdocs are in E04 state

    Hi all,
    Bdocs are failed with error text "Function G1 does not exist". and information error is "No extension entered" .Details are as follows
    Bdoc type : BUPA_REL
    State : E04
    Queue name : R3AD_CUSTOME0004700005
    checked SMQ1/SMQ2 transactions, no queues are there.
    Help me how to clear those bdocs.
    Thanks & Regards,
    P.V

    Hi,
    Check if another Bdoc BUPA_MAIN is in green.
    If not, then request download the BUPA_MAIN for the customer first and then BUPA_REL.

  • BDOC Error : "BDoc stored before update task (intermediate state)"

    Hi Experts,
    I have stuck BDOCs under BDOC type "BUS_TRANS_MSG" and the error msg as "BDoc stored before update task (intermediate state)". The error occurs when BDoc Message was not written to qRFC queue. I checked the update tasks in transaction
    SM13 and could find the entries there. I opened one of the entry and was able to spot the error in one of the function module.
    The error was encountered at some later point in time and is been fixed. I now want to re-send the update so that the new update is written and the BDOCs are processed.
    Kindly guide me through the steps that need to be performed in order to re-process the BDOCS.
    Thanks,
    Chaudh

    Hi,
    BDocs were stuck at time when we really had a problem; now the problem is re-solved. I have checked SM13 we have entries highlighting the problem, but i really don't know how to re-update the error entries in SM13.
    I believe once that is done then i might possibly be able to re-process the BDOCs in SMW01.
    Thanks,
    Chaudh

  • BDoc Intermediate State - CRM2007

    Hi everyone
    I have Bdocs thats in Received (intermediate state)
    BDoc Type: BUPA_MAIN,
    Flow Contect Description: mBDoc Validate
    Sender Site Name: OLTP
    Queue Name shows R3AD_CUSTOME.........
    User: CRMUSER ( batch )
    When I try to reprocess these Bdocs , I get a runtime error " CALL_FUNCTION_PARM_MISSING
    " It seems as if though I need to maintain a parameter under one of my Z function modules
    This I can fix
    But why am I getting these Bdocs in this state? Seems like all BDocs coming from R3 doing this. This is only happening in our production system
    Inbound and oubound queues are cleared
    Please advice
    regards
    Manie

    Hi Manie,
    How these intermediate BDocs are getting created?
    Are you triggering any type of load(delta,initial or request)?Or they are coming down due to delta flow
    from R/3 automatically?
    Does these BDocs contain data or they are empty?
    Which version of CRM ,you are using?
    Thanks and Best Regards,
    Shanthala Kudva.

  • BDocs in intermediate state.

    Hi All,
    While making delta changes to business partners I find that the BDoc's are going into an intermediate state. When I check the Inbound queue in CRM the queues seem to get into a 'READY' status, if I unlock these entries in smq1, or if i reprocess the BDOC, things are working fine. However the delta changes are not taking place automatically.
    I have checked the queue registration, the following queues have been registered CRI, CIR, CRM_BUPA, CSA, R3A, AND R3U. I find that the status of queue demon in t-code smohqueue is Running. However I find that in most systems where the delta changes are taking place automatically, the status is released, and not running. What should the correct status be?
    If i click on start queue demon, it goes into running status, and i am unable to change it to released status.
    Kindly request your help in analyzing why the delta changes are going into intermediate state.
    Regards,
    Thiru

    I have the same problem. Did you solve?
    Regards,
    Lyda

  • Reprocess Bdoc with status I04 (Intermediate state)

    Hi All,
    I have problems to reprocess Bdoc's with status I04 (Intermediate state).
    In a batchprogram I created businesstransactions. But when a central blockade was set on the businessparter, no businesstransaction appear.
    In the SM13 I have Update-errors (SAPSQL_ARRAY_INSERT_DUPREC).
    In the SMW01 I have Bdoc's (BUS_TRANS_MSG) with status I04.
    I'm having problems to reprocess the Bdoc's.
    After uncheck all central blockades, the reprocess of the bdoc failed.
    After changing the status of the Bdoc from I04 to I01, the bdoc will be reprocessed (green), but the data in the Bdoc will not be written to the database (CDB).
    What could be a solution to reprocess the Bdoc's with an update of the CDB (and the businesstransaction appear)?
    Thanks!

    Hi G. van Doom,
    You got a system error: <b>SAPSQL_ARRAY_INSERT_DUPREC</b>, this means that the running process tried to insert to the DB a records that is already existing. Hence it raised this system error.
    Reprocessing the BDoc won't solve the issue since you will again try to insert record that already exist.
    I would suggest you to maybe check the <b>task</b> you set in the BDoc from your batchprogram, if the records was already existing then you should rather do an update, by using Task = 1. Therefore you must have a logic in your program which can find if the record exist or not in order to set the appropriate task.
    Task:
    1 - Update
    2 - Insert
    3 - Delete
    Hopping this help.
    Sincerely,
    Alain Gauthier

  • Bdoc state - Received (intermediate state)

    Hi experts,
    Can you please help me with this. We've just found out that we have several bdocs with state "Received (intermediate state)" in middleware. They said that if these are in this state for quite some time, we need to reprocess it to prevent any future problems. When I choose one and click on Show Bdoc Msg Errors/Receivers, it only says "No receivers or error segments for Bdoc message found."
    Can you please let us know how to clear these? I'm providing below two bdocs on these state that may help you understand the problem.
    1.
    Bdoc state description: Received (intermediate state)
    Bdoc type: BUPA_REL
    Flow context description: mBdoc Validate
    Send date: 01.09.2010
    Send time: 19:01:06
    Sender site name: (This is our ECC box)
    Queue name: R3AD_CUSTOMExxxxxxxxxx   (x > customer number)
    User (Creator): MWRFCXXX (x > our ECC box)
    2.
    Bdoc state description: Received (intermediate state)
    Bdoc type: CND_M_SUP
    Flow context description: mBdoc Validate
    Send date: 09.02.2011
    Send time: 15:43:04
    Sender site name: (This is our ECC box)
    Queue name: R3AD_DNL_COND_A594
    User (Creator): MWRFCXXX (x > our ECC box)
    Hope you can help us here. Thanks a lot!
    Kind regards,
    Mike

    Hi,
    Go to transaction R3AR3,Are all your requests still there.IS there any queue stuck in smq2  and SMQ1.If there is nothing stuck in SMQ1 or SMQ2,then i think for you Bdoc type BUPA_REL,for all those queues in intermediate state there is no number found for the range which you used to create request for Partner relationship.
    Regards,
    Arya

  • Bdoc intermediate state( I02)

    Hi,
      I am creating bdoc thru report program. When i execute the program Bdoc is creating as a Intermediate state ( I02) and it is stored in SMQ2(Inbound queue) level. In the queue level it is showing status like RETRY.
    Please help me in this.
    Regards
    Srinu

    Hi,
    have you already successfully created the replication object, publication and subscription in the administration console (transaction SMOEAC)?
    Maybee this hind helps.
    Best regards
    Manfred

  • BUPA_MAIN stays in Intermediate state Function Module missing

    We noticed that on our Productive system, since yesterday most
    of the BUPA_MAIN BDOCs status are in yellow "After qRFC step (intermediate
    state)" since last two days on PRM. Before it was working fine.
    We got o SMW01 & re-process it, then we get a short dump which says:
    " Function module "/1CRMGC/CGBUPA_MAIN_RRR" not found."
    We compared in th eTxn: SBDM the BUPA_MAIN on Production & Test systems.
    We found that the Module "/1CRMGC/CGBUPA_MAIN_RRR" is not there in Production but it
    is there on other systems where its working.
    Please let us know how we can generate this,
    Is it the normal process to Generate on the dsired system in our case production directly? or do we do it in Development & then Transport it.
    We have this bug in Production and fix this asap.
    Thanks
    Regards
    Rahul
    Edited by: Rahul Kumar Lal on Sep 2, 2010 1:50 PM

    Hi Rahul,
    Goto Trxn. GNRWB -
    Generator Group : REPLI
    Industry : Consumer Goods
    Select BUPA_MAIN on L.H.S. and all Generators on the R.H.S.
    Click on Generate/Check icons.
    or you can goto trxn . SMOGGEN and select BUPA_MAIN.
    Tnx,
    Rohit

  • SMQ1 queues are in stop state

    Hi All,
    My outbound queues from ECC to CRM system are in Stop state, I checked under qRFC monitor (SMQS) , queue is registered.
    When i go to SMQ1 and click on unlock the queues works but when the next entry gets stuck again.
    Any ideas to fix this.
    Thnx
    Addi

    Dear Addi,
    Please check your RFC settings - and the logical systems defined.
    Secondly, check the Inbound (SMQ2) and Outbound (SMQ1) queues on both systems, that will help you trace the reason of the error. Check Tx. SMW02 to trace BDocs messages if any.
    If middleware was working fine earlier then most probably RFC settings have been altered.
    Regards.

  • VIP in Intermediate state after relocate

    11.2.0.2.0 windows 2008 2 node RAC
    Rolling patch. Brought down and relocated all services to node 2. All services start ok except for node 1 VIP which goes to intermediate and FAILED OVER state.
    C:\Windows\system32>crsctl status resource -t
    ora.rac01dev.vip
          1        ONLINE  INTERMEDIATE rac02dev             FAILED OVER
    ora.rac02dev.vip
          1        ONLINE  ONLINE       rac02devAll other services are ok, SCANS and listeners are all up.
    manual stop and start of the VIP looked to have been ok but a further check on the status shows its still at intermediate.
    C:\Windows\system32>srvctl status vip -n rac01dev
    VIP RAC01DEV-VIP is enabled
    VIP RAC01DEV-VIP is not running
    C:\Windows\system32>
    -- manually stop and start it
    C:\Windows\system32>srvctl stop vip  -i RAC01DEV-VIP
    C:\Windows\system32>srvctl start vip  -i RAC01DEV-VIP
    -- status of the vip with node parameter shows down
    C:\Windows\system32>srvctl status vip -n rac01dev
    VIP RAC01DEV-VIP is enabled
    VIP RAC01DEV-VIP is not running
    -- status of the VIP with -i parameter shows up.
    C:\Windows\system32>srvctl status vip  -i RAC01DEV-VIP
    VIP RAC01DEV-VIP is enabled
    VIP RAC01DEV-VIP is running on node: rac02dev
    -- all stat shows intermediate and failed over
    C:\Windows\system32>crsctl status resource -t
    NAME           TARGET  STATE        SERVER                   STATE_DETAILS
    Local Resources
    ora.DATA.dg
                   ONLINE  ONLINE       rac02dev
    ora.FLASH.dg
                   ONLINE  ONLINE       rac02dev
    ora.LISTENER.lsnr
                   ONLINE  ONLINE       rac02dev
    ora.asm
                   ONLINE  ONLINE       rac02dev             Started
    ora.gsd
                   OFFLINE OFFLINE      rac02dev
    ora.net1.network
                   ONLINE  ONLINE       rac02dev
    ora.ons
                   ONLINE  ONLINE       rac02dev
    ora.registry.acfs
                   ONLINE  ONLINE       rac02dev
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
          1        ONLINE  ONLINE       rac02dev
    ora.LISTENER_SCAN2.lsnr
          1        ONLINE  ONLINE       rac02dev
    ora.LISTENER_SCAN3.lsnr
          1        ONLINE  ONLINE       rac02dev
    ora.cvu
          1        ONLINE  ONLINE       rac02dev
    ora.oc4j
          1        OFFLINE OFFLINE
    ora.rac01dev.vip
          1        ONLINE  INTERMEDIATE rac02dev             FAILED OVER
    ora.rac02dev.vip
          1        ONLINE  ONLINE       rac02dev
    ora.prd.db
          1        OFFLINE OFFLINE
          2        ONLINE  ONLINE       rac02dev             Open
    ora.scan1.vip
          1        ONLINE  ONLINE       rac02dev
    ora.scan2.vip
          1        ONLINE  ONLINE       rac02dev
    ora.scan3.vip
          1        ONLINE  ONLINE       rac02dev
    C:\Windows\system32>anyone know?

    Sebastian Solbach (DBA Community) wrote:
    Hi,
    works as designed. If a node VIP is not running on the node it belongs to, it goes to FAILOVER and intermediate state.
    (Which also does make sense, since a failovered VIP does not have a listener, and hence does not service any client. So client will only receive a connection error and tries the next VIP in the address list).
    thanks for reply sebastian and "expected behvaiour" had crossed my mind but cant find a doc note anywhere that refers to that. Not that I doubt you but do you have a doc note on this?

  • Intermediate state

    Hi all experts,
    We are in 11gR2 in windows 2008. Our database is 2 nodes rac. I got alert message below.
    Host=xxxx.xxxx.xxxx.xx.xx
    Target type=Cluster
    Target name=ora-scan
    Message=ora.registry.acfs has 1 instances in INTERMEDIATE State
    Severity=Warning
    Event reported time=Oct 17, 2013 6:40:45 AM EDT
    Operating System=Windows
    Platform=x64
    Associated Incident Id=xxxx
    Associated Incident Status=New
    Associated Incident Owner=SYSMAN
    Associated Incident Acknowledged By Owner=No
    Associated Incident Priority=Low
    Associated Incident Escalation Level=0
    Event Type=Metric Alert
    Event name=resource_status:crs_event_composite_status
    Metric Group=Resource State
    Metric=State Change
    Metric value=PARTIALLY_INTERMEDIATE
    Key Value=resource_ora.registry.acfs.type_ora.registry.acfs
    Key Column 1=Key
    Rule Name=EDC - Metric Alert,Warning
    Rule Owner=SYSMAN
    Update Details:
    ora.registry.acfs has 1 instances in INTERMEDIATE State
    Incident created by rule (Name = EDC - Metric Alert, Warning; Owner = SYSMAN).
    I did check the cluster resources by srvctl status resource -t and all of resources are in online and none of them i saw in intermediate state. Is there any other command and option to investigate this error? Please  give some fedback.

    This might be of some help
    Ora.registry.acfs Resource Has Unknown / INTERMEDIATE Status (Doc ID 1581513.1)
    Did you restart the server or any component? Sometimes agent termination during instance start up could leave resources in intermediate state.  You can  try shutting down and startup gracefully if possible.

  • Messages are in Scheduled State

    Hi
       some of my messages are in scheduled state. i  verified   SMQ1,SMQ2 . no queues are in block state. also  i  executed  register queues in sxmb-adm still they are  same state. how can i make them as successful state. only by restarting the messages or is there any other way? also tell me why these messages went to scheduled state

    Reddy,
    Can you please check this threads for possible solutions:
    Problem with scheduled message in SXMB_MONI
    SXMB_MONI - Message scheduled on outbound side (no queues)
    Regards,
    ---Satish

  • Business Area wise finacial statements - P&L, Balance Sheet

    Hi,
    My client has a requirement to have business area wise Trail Balance. In OBY6, business area financial statements tick has been done. So it is asking business area in cost objects. Plants are assigned to business areas. But still, I am able to post Balance sheet account to Balance sheet accounts without business area. I thought making business area mandatory for all G/Ls in OBC4. Then I have to write many substitutions  and  I may lose advantage of F.5D which gives business area basing on other P&L line item.
    What needs to be done?
    Can someone help me to suggest what exactly needs to be done to get Business Area wise Trail Balance.
    We have not activated document splitting functionality. Please suggest the way without document splitting and New G/L functionalities.
    Regards,
    Saidarao
    Edited by: saidarao G on Nov 22, 2011 7:47 AM

    Hi,
    You if want business area wise finanancial statements go to the this tranction code F.01
    Regards
    Mastan Reddy N

  • Indexes are in unusable state

    hi
    i am beginner....
    indexes are in unusable state...
    how can i make it actual state

    Maybe you can use
    alter index your_index_name rebuild online;?

Maybe you are looking for

  • Commission agent from Invoice required for a Report

    Dear Friends, I require the " commission agent " maintained in the Invoice Partner Functions for a Report. Tried table VRKPA, but no luck. Kindly assist. Regards Trupti Deulkar

  • Richfaces 4 and weblogic 10.0: error deploying

    When i tried to deploy an example application, I have this error: Unable to set the activation state to true for the application 'TestJSF'. weblogic.application.ModuleException: at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.jav

  • DOWN key of the keyboard in a JTABLE

    I want that the DOWN key of the keyboard doesn't provoke the passage of a line to another in a JTABLE, I want that she executes something else.

  • Hiding folder "at / location " display in LR 1.4.1?

    Recently, I moved my picture folders off an external HDD to my internal.  I forget how I did it (it's been a month or so) but whatever I did, I got "<foldername> at /<location>..." after every main folder.  I'd like to hide this.  Is there a way?<br

  • Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

    I am using an Audio Science ASI 5111 Sound Card.  I also used Audi tion 3.0.1 on Windows 7. The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode. At times I get the R6025 error