Bdocs not generated
Hi,
I have created a sales order on a stand- alone CRM box and intend to capture the order data in a Bdoc, but no Bdocs are getting generated.
Can some of you help me with this. I have attached a particular action profile with the transaction type attcahed to Sales Order transaction. Here the sending of Bdocs has been scheduled automatic. When i create and save a sales order, I get a green (success) traffic light for 'Bdocs sent' action and the corresponding log also displays success, but i am not able to see any Bdocs in SMW01.
Please let me know if you think I am missing out at some point.
Regards
Priyanka
Hi,
Have got the answer to it. For my system a BADI CRM_BUS20001_UPLOAD was deactivated because of which the BDocs were not generated.
Thanks for all ur help !!
Regards
Priyanka
Similar Messages
-
BDoc not generated on CRM for delta
Hi,
i'm trying to load delta with data source 0CRM_SRV_PROCESS_H, delta has been succesfully initialized from BW, and all the initialization data has been loaded, i can now see the queue on RSA7 on CRM.
Now when i create a new service on CRM the BDoc (type BUS_TRANS_MSG) is no created on transaction SMW01.
Am i missing any setup process ?
thx
JPNow... i can see the new BDocs on transaction SMW02, but are all yellow (state I02). Why aren't they taked to the queue ?
If i hit "Reprocess BDoc Message" it is taked sucessfully to the queue. Why is it necesary ? -
After articles changed,do not generate bdoc
hi all
we met a issue,when we mass maintained articles by t-code WSM3.some article generated bdoc,while others did not generate bdoc from ecc(release 5.0) to crm.please help me how to resole this problem.
thanks & regards'Hi,
I suspect that may be due to filter settings in CRM not all articles get downloaded. Please check the settings in R3AC1 for the
PRODUCT_MAT object or any relevant object in your scenario,
Hoping that this will be helpful
Best regards
Christophe -
Income tax is not generating on Bonus for second time through off cycle
Dear All,
I have an issue related to bonus. We have given bonus off cycle in the month of August 16th income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
Let me know where it went wrong.
Rgds,
PrasadHi Narendra,
Thanx for the response, i tried the above but not generating WT/460. can you explain the logic.,
Changed BON5 to BON3
created new Tax code ZTDR from STDR
Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
didn't understand why /401 or MTDR or 9TDR
Thanks
Sanm -
Dear All,
I have facing one issue at the time posting in MIRO.
I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
Post key description amt curr.( USD)
89 Stk.RM -IMP 32100.00
96 PL.VND.RM.IMP GR/IR 32100.00
40 Purchase RM-IMP 32100.00
50 Purchase offset. 32100.00
And Miro Posting on date 23/03/2010
Post key description amt curr.( USD)
31 xyz Vendor 32100.00
86 PL.VND.RM.IMP GR/IR 32100.oo
89 Stk.RM -IMP -
40 Purchase RM-IMP -
50 Purchase offset. -
But when I post for another po in migo on date 03/01/2010
Post key description amt curr.( USD)
89 Stk.RM -IMP 76800.00
96 PL.VND.RM.IMP GR/IR 76800.00
40 Purchase RM-IMP 76800.00
50 Purchase offset. 76800.00
and miro posting on date 19/02/2010
Post key description amt curr.( USD)
32 yz Vendor 76800.00
86 PL.VND.RM.IMP GR/IR 76800.00
89 Stk.RM -IMP Line item not generated
40 Purchase RM-IMP Line item not generated
50 Purchase offset. Line item not generated
Can any one tell why line item not generated for miro posting .
Regards
MilindHi,
The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
Other wise it wont show those extra line items
Please check group currency , global currency etc. for your extra line items -
XML Publisher question - Not generating a valid XML file
I am working through an Oracle document that walks you through creating an XML Pub report. I am using HCM 8.9, Tools 8.49.15 and it has XML Pub installed and I have the Microsoft plug-in installed
I have created a query and have downloaded an rtf template and now am on a page where you enter your data source and then click ‘Generate’ for the sample data file. I did it and it created ‘PERSONAL_DATA_PAY.XML’ which is created from a PS Query. However if I click on ‘PERSONAL_DATA_PAY.XML’ it generates a blocky text file that is not an XML file and I can’t go any further.
Do you know why it’s not generating a valid XML file when I click on 'generate'?
Thanks
Allen H. Cunningham
Data Base Administrator - Oracle/PeopleSoft
Sonoma State UniversityYou mean to say that you create a new data source by specifying Data Source Type as 'PS Query' and Data Source ID as your query name, you are not able to generate a valid XML file (by clicking on Generate link).
did you cross check your query by running it?
On field change of Generate link, PeopleSoft uses PSXP_RPTDEFNMANAGER and PSXP_XMLGEN app packagaes and query objects to create the file
It should work if you query is valid.. -
Inspection Lot not generated, with MIGO 561
Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
PiyushTo load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock. -
Customized Seeded report to XMLP report but its not generating output file?
I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
Steps i followed to Customize reports are.
1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
2. Ran report to generate xml data and using xml data created RTF file
3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
Now while i am running report its completing normal, but its not generating output file giving Error like –
"Unable to find Published Output for this request"
“No Output File Exist for Request No - xxxxx”
No Idea why its not picking template, Can anyone help me in this?
Using:
Oracle Applications : 10.0.5.2,
MS Word 2007
Thanks,I am not giving the solution, providing you a hint..
This is the query you need to satisfy,
SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND XDS.APPLICATION_SHORT_NAME=
( SELECT APPLICATION_SHORT_NAME
FROM FND_APPLICATION
WHERE APPLICATION_ID=CP.APPLICATION_ID)
AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
AND R.OUTPUT_FILE_TYPE='XML'
AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
ORDER BY R.REQUEST_ID DESC
Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly.... -
MRP is not generating any schedule line in my vendor's scheduling agreement
Hello all,
My question is: why the MRP is not generating any new line in my vendor's scheduling agreement?
This is the scenario:
I have created a vendor's scheduling agreement with transaction ME31L
I have created a customer's scheduling agreement with transaction VA31 and those characteristics:
- Forecast scheduling lines
- JIT scheduling lines
- MRP to DS type assigned to type C: Requirements according to forecast delivery/Deliveries according to JIT
I have run MRP with transaction MD01
MRP is generating some purchasing requistions, not purchase orders because we have set up a release strategy which requires 2 approvals, but those purchasing requests are not generating any new line in the vendor's scheduling agreement.
Any idea why it could be? Please do not hesitate to ask for further explanations. Thank youHi,
Check if stock is available for the material in that plant.
Also check the requirement date for the material and compare it with the planning horizon for that plant.
Check your material master MRP view.
Create source list(for material and plant in question) with MRP indicator 2.
Thanks and Regards,
Maheshwari -
Schedule lines not generated after MRP run
Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
BennyHi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber -
Lines are not generated for holidays and sundays
Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
parthaHi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi -
BIP Report does not generate in Siebel 7.8
Hi Experts,
We are having a problem not generating BIP report in Siebel 7.8. It says 'failed to generate report'.
The xdo.log displays
[100710_043210802][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210802][][STATEMENT] Generating page [4]
[100710_043210802][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210802][][STATEMENT] Phase2 time used: 16ms
[100710_043210818][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210818][][STATEMENT] Total time used: 7141ms for processing XSL-FO
[100710_043210818][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[100710_043210833][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica closed.
[100710_043210833][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210833][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Bold closed.
[100710_043210849][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210849][][STATEMENT] FO+Gen time used: 7172 msecs
[100710_043210849][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210864][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[100710_043210864][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210880][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210880][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[100710_043210896][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[100710_043210896][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210896][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=508MB, total=388MB, free=231MB
[100710_043210896][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210911][][STATEMENT] PublicReportService::generateReport FINISH and Return BIPReportResponse --- Time Elapse = 149007
We cannot trace where the error is coming from. Can anyone know that to do about this? Thanks!
Edited by: user11174318 on Oct 7, 2010 4:58 AMHi,
Yes, this is fixed.
The root cause was a security patch from Microsoft.
The solution:
- Remove Microsoft Patch KB974455.
or
- uncheck the ‘Use HTTP 1.1’ flag under Internet Options > Advanced tab.
Regards,
Hakan -
Part1 is not generating for Vendor Subsequent delivey
Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K SinghHi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh -
Part1 is not Generating for Vendor Subsequent Delivery
Hi ASAP
I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods.
1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO.
For excise, part1 & 2 to relevant register posting has taken placed.
Now quality dept. has rejected the goods, for which vendor delivery should take place.
2. For Vendor return Delivery
MIGO 122 w.r.t GR of 101-> Excise capture & Posting using J1IS&V.
For Excise, Part1 is getting created using J1IS, J1IV is creating Part 2, in Acct. doc. RG23C BED/ECS/HEC is being Credit and "PLA On Hold" is being Debited for BED/ECS/HEC amount.
3. For Vendor subsequent delivery, I have done the excise config. for Movt. 123 .
MIGO 123 w.r.t. GR of 122.
While doing GR for 123, system is not generating Excise screen.
Any way, After GR of 123, I have Capture Excise Invoice after inputting all relevant data, but while Posting, System is generating message that Part1 is does not exist for vendor excise invoice.
Now I think requirement is visible for your understanding to suggest me some valuable idea.
If possible can plz drop a test mail to hksiva.manoj at gmail dot com for further clarification?
Thanks & Regards
Manoj K SinghHi Rajaram,
Thanks for your ealiest reply, yes i have done the config. which you suggested,
Even after this " Specify which mvt type involves excise invoices", assignment system is not generating Excise screen for Movt. 123 w. r. t. 122.
Manoj K Singh -
Excise Accounting document not generated for Imported Asset GR
Dear all,
Excise accounting document is not generated for imported asset goods receipt(MIGO)
but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
Asset is Dr to GR/IR
Process is
1. Create asset purchase order with acct. assignment "A",
2. Customs miro based on p.o.
3. Do GR with excise
4. Post invoice for orginal vendor.
What will be cause of this problem ?
How to solve this issue ?The above issue may be due to Accout assignmnet -A . Check your accout assignment in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
rewdzzzz is full if correct
Edited by: manu m on Apr 24, 2010 11:11 AM
Maybe you are looking for
-
I purchased a movie for my grand daughter, Cinderella I deleted it of my ipad cause I had no more room but it seems to be gone off my itunes too! how do I get it back?? please!
-
hi, i am trying to run a ready example that has a ( .war )extension, can any one help me in this regard and tell me how can i get to run that examle using sun java creator? best regards, sssnbj
-
Java DC not deployed with WebDynPro DC
Hi, I've been testing the DC functionality and I'm trying to create the following: 1) WebDynPro DC (DCA) 2) Java DC (DCB) DCB has code for reading data from a database table (three classes, one is set as a public part). This code is functioning ok in
-
What forum might be useful in solving this issue: Simple Examples of data connectivity and transfer of data from an .asp.vb to javascript in an .aspx file
-
Which sim card to be put in ipad3 32 gb 4g in india?
Which sim card can be used in iPad 3 in india?