BDP-S390 Wireless Adapter not found

I purchsaed my BDP-S390 2 days ago and the internet was working perfectly, then this morning when I tried to use it, it wasn't working (getting unable to connect) so I reset the Network settings and tried setting up the adapter again (my wireless is working fine on my laptop and smart phone) and now I'm getting an error message saying that the Wireless LAN Adapter can't be found and to check the devices USB port, but the adapter is built-in.  I've reset the Network settings (and the device) a couple of times and it doesn't fix it, anything else I can try? Thanks.

I have updated my BDP-S390 to the latest firmware (via burning a CD from downloaded file), and still get the message about "USB Wireless LAN Adapter not found".  Somewhere in this forum, advice was given to then restore the unit to factory settings, which I did, but I still get the error message.    Call to telephone support said that means the built-in LAN adapter is broken, and I have 3 choices: 1. Send the unit in for repair (a lot of trouble, and I'd have to pay since it's more than a year old).2. Buy a USB LAN adapter (I have to purchase).3. Hardwire the unit to my internet gateway with an ethernet cable (impractical, since in different part of house). I find it completely unacceptable that my unit suddenly stopped working like this.   I find it unbelievable that there was an actual hardware failure within my unit, since so many people report the same failure (or if it is, it's a systemic failure that Sony should fix for free, else supply the USB adapter).   I suppose I will try option #2 above (purchase a USB LAN adapter), since Amazon has one for $10 or so: http://www.amazon.com/gp/product/B008IFXQFU?refRID=1Q425HCH8G6TCNENYT80&ref_=pd_cart_vw_2_1_p Maybe it will work. Meanwhile, I will not be purchasing any more Sony A/V products, and I will advise my friends (including Facebook pretend "friends") of the same (I'm asked a lot, since I am a computer/electrical engineer).   Pretty ****** to anger people like this, since I'd have been satisfied if they sent me the USB LAN Adapter, and I'm sure they can source 'em for a lot less than $10.    

Similar Messages

  • X41 wireless adapter not found

    I have just reinstalled XP on my x41 version  2525-65g     using a version of XP professional  I happened to have.
    I thought that I had re-installed all the drivers but I keep getting the message "No supported wifi adapters in the system in the system".  I have installed Intel PROset/wireless utility  which used to work before the reinstall.
    I am also having trouble getting bluetooth going as well.
    I have various drivers with yellow question marks in device manager.
    Can anyone tell me what to try next?
    Solved!
    Go to Solution.

    Please first of all identify the unkown wireless device as described here to verify, that the "factory-default" wireless lan-card is built in.
    Next step will be to uninstall all wrong WiFi-drivers if installed (Controlpanel - Add or remove Software).
    The WiFi driver for the Intel of  your X41 is this one:
    - Intel PRO/Wireless 2200bg, 2915abg, 3945bg, 3945abg, 4965ag, 4965agn Mini PCI adapter.
    (view the readme in the ZIP-file with Wordpad)
    Sometimes users tune up their wireless by replacing it by an Atheros/Phillips WiFi-Card:
    - ThinkPad 802.11abg, 802.11abgn, 802.11bg, and 802.11bgn Wireless LAN Mini PCI Adapter
    or Cisco Wireless lan:
    - ThinkPad Dual-Band ab and 802.11abg wireless LAN Mini PCI adapter
    Please read the installation instructions on the concerning download-page.
    Have success.
    P.S.:
    I use a german user-profile in this forum. So the english word "Subject" will be translated to the german "Betreff"
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • Wireless adapter not found

    I have a Thinkpad T400 (Model 7417, Windows Vista). Recently my computer stopped showing wireless capabilities. When I did a diagnostic I was told: No supported wireless adapters (802.11.WAN or Bluetooth) are installed in the system... I'm pretty sure they were there when I bought the computer. A check in the Device Manager shows me that Intel WiFi Link 5100 with PAN is enabled. I updated the driver and now I am being told: Driver version 12.3.2.1 does not support Intel PROset/Wireless WiFi software. I have checked Programs and Features and it says the Intel Proset software is installed and enabled. Pretty clueless about what to try next... Any ideas would be greatly appreciated!

    hey polydenver,
    welcome to the forums.
    uninstall all network drivers from your unit. let windows install its own generic drivers. once that is done, see if you can make a connection both wired and wirelessly.
    later head over to >> http://support.lenovo.com , download all the network drivers that was previously remove but do not install them yet.
    set your unit to diagnostic mode via msconfig and then install the drivers.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Intel My wifi technology adapter not found

    Hello ! I got problem.
    Some days ago my wifi worked fine until now .Now i got error like this: adapter not found. Can't access wifi anymore. I think my drivers are updated, i had downloaded the latest from your site. I tried format, but that didn't help too, system restore didn't help, unistalling old drivers and installing new drivers didn't help. But sometimes it will find my wireless connections and it will work fine, but sometimes it's gone.  Currently i'm connected with cable. I have tried many solutions but none of them have helped me. Can you answer what to do?
    Some pictures:
    http://postimg.org/image/zdejf56il/
    http://postimg.org/image/455yhtgsd/

    NikuNikkur,
    In device manager, network adapters, Microsoft Virtual WiFi Miniport Adapter.
    Make sure the box is checked, allow computer to turn off this device to save power. If the box is unchecked, the My WiFi Adapter will go missing.
    Rick

  • V570 intel wifi technology adapter not found

    I have re-installed Win 7 OS, and installed all drivers except for the WIFI, I have 3 driver folders WIDI, WIMAX, WLAN..I am not sure what all 3 of them do, I would first like to know that.
    2ndly I want to install wireless setup on this, somebody please help me do this as I am having trouble understanding on how to do this..I tried all of them where WIDI set up says the device is not compatible, while other errors are ADAPTER NOT FOUND.
    Solved!
    Go to Solution.

    for wireless, use "wlan".
    http://forum.lenovo.com/t5/IdeaPad-Y-U-B-V-and-Z-series/V570-Win-7-64-pro-NO-WIRELESS/m-p/493123#M43...
    http://forum.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/V570-Win-7-Pro-non-OEM-Wireless-not-workin...

  • Why is my wireless network not found?

    I have just installed HP Deskjet F4500 on my PC. I want to connect to my wireless network connection but it keeps telling me "wireless network not found". (I am using my wireless so I know that the wireless connection is fine.) I have all correct details (correct network, SSDI, WPE encryption code) for installation but no luck.
    I have a Netgear DG834N router. I did run the www.hp.com/go/networksetup analyser which told me that HP is not currently supporting the router. Can that be right?
    This question was solved.
    View Solution.

    OK, let's go check the router's settings:
    Type 192.168.1.1 into a browser.  The login is 'admin' and the password is 'password'.
    On the left side, choose Wireless Settings under the Setup heading.  You should see your SSID.  Make sure the Mode is set to 145Mbps.  Here you can choose your Security Options.  I highly recommend WPA2-PSK (AES).  If you have WEP, please change it.  WEP is not secure.  If you change your security settings, choose a passphrase that is at least 13 characters, numbers and letters, upper and lower case.  You will have to re-enter this into all of your wireless devices.
    Now, lower on the left side, choose Wireless Settings under the Advanced heading.  Make sure that SSID broadcast is checked.
    If you changed anything, check Apply toward the bottom.
    Let me know what you found.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Netgear wireless adapter not picking up signal

    I have a D-link DI-524 wireless router. Set up with WPA-PSK.
    I have a Pismo 400 that came with an ethernet adapter Netgear 802.11b Wireless pc card.(16-bit PCMCIA Model MA401).
    I thought, until recently, that it was operating off my router as does my PB with built in wireless. But I found out the signal it is picking up is from a neighbor's wireless network, not mine. I took the Pismo upstairs placing it next to my router and the network doesn't show as an option to join.
    I don't know what is going on and appreciate any input.
    Thanks!

    Thanks for the quick response.
    I found there was a firmware upgrade on the Dlink router, which I did.
    I was able to connect after that but.......The firmware upgrade Dlink released on 8/16 now will not allow me to encrypt the router. After an hour with their very helpful tech support they realized that there was a problem.
    Now I don't know what to do to protect the network.

  • Wireless adapter not showing any available networks

    I've recently discovered that my Intel Centrino Advanced-N 6235 wireless adapter in my Asus Zenbook UX32VD running Windows 7 64 bit is not working as it won't show any available networks while my phone can find plenty in the same area. 
    So far I've:
    -Re-installed the driver. Before I did this the adapter wouldn't even show when trying to change adapter settings. When I looked at the adapter in device manager I found an error code 52 which disappeared after I re-installed the driver.
    -Re-installed the client for windows networks installed for the adapter which did not make a difference.
    -Temporarily turned off my AVG-free anti-virus which did not make a difference. 
    When looking at the adapter after clicking change adapter settings in the networks and sharing center it says it's not connected, but as stated above it doesn't show any networks to connect to.
    Also, when I try to use the networks diagnostics tool I get the following error message:
    Windows cannot find
    '::{26EE0668-A00A-44D7-9371-BEB06...\resultPage?keywords=+Network;NetworkDiagnostics'.
    Make sure you typed the name correctly, and the try again.
    Any possibly solutions I've not already tried are welcome. Thanks in advance for any help.

    Hi,
    Locate to Services and check all services relating to wireless and network are enabled: Wireless Zero Configuration and WLAN AutoConfig, etc.
    Also, make sure your NIC is working correctly from device manager.
    http://kb.linksys.com/Linksys/GetArticle.aspx?docid=108496d0924847afaf9c4a7bb72110b5_5646.xml&pid=80&converted=0
    Have you tried manually connecting to wireless?
    http://kb.linksys.com/Linksys/GetArticle.aspx?docid=8fd9ee85a0bf42f0986ed23390be8c66_19850.xml
    Andy Altmann
    TechNet Community Support

  • Photosmart 7515 connect via USB but not wireless, Device not found on Network

    Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly.  This happened with OS X Lion and nor MountainLion.  Have a TimeMachine Airport.  Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens.  I have reset router, printer, firmware updates, software updates.... at wits end.  I have followed the instructions on the below resource page link with no luck.  Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
    Please help anyone!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la... 

    It sounds like the Macs and the printer just aren't communicating.
    If you press the network icon on the printer, does it indicate it is connected to the network?
    I recommend two additional steps that are not listed in the linked document.  The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
    Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
    The next step is to install the driver package from Apple.  This can be found here.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Wireless adapter not showing up in device manager

    Hello all,
    I am having a particularly frustrating problem. I was playing around with the memory timings to overclock my computer and all of a sudden, my wireless adapter ceases to exist to my computer. It does not show up anywhere in device manager (including no unknown devices or anything), only the Ethernet shows up. I have tried a system restore, turned off all OC and my BIOS is updated to the most recent version. Is it possible that trying to overclock my computer caused the wireless adapter to burn out? The motherboard I'm using is the msi x99S gaming 9 ack.
    Any help would be very appreciated, thank you all in advance for your time to help out!

    remove power cord from the PSU and >>Clear CMOS Guide<<
    if the wifi card is removable, try to reseat it
    also install latest killer drivers from:
    http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
    [try older version as well if needs]

  • HP Pavilion dv6-3043ee Realtek Network Adapter not found in Device Manager

    Hi I own an HP Pavilion dv6-3043ee, 64bit and running Windows 7. And somehow the network adapter for the LAN got uninstalled for some reason. Now after posting something on the site I finally downloaded the driver for my laptop.
    Now another problem, after or at the end of the installation process a pop up message was shown:
    "The Realtek Network Controller was not found,
    If Deep Sleep Mode is enabled Please Plug the Cable."
    Now I checked Device Manager to see if the Realtek Network Adapter was there but it wasn't. All I can see are:
    -Atheros AR9285 802.11b/g/n Wifi Adapter
    -Bluetooth Device (Personal Area Network)
    -Bluetooth Device (RFCOMM Protocl TDI)
    -TAP-Windows Adapter V9
    Someone please help. Thank you.

    If device is identified but there is no driver for it, it will be appeared as unknown device in Device Manager with question mark icon (?), are you seeing such thing in device manager?
    If not, you should refer to your PC manufacturer's website and download.
    Make sure report this issue using Feedback App.

  • Satellite C855 Wifi Adapter not found

    I saw simliar posts but I still have not found the answer I am looking for. I have a C855 which was a best buy about 5 months ago. About 3 weeks ago, the wifi started to disconnect without warning. All my other 6 wifi connections (tv's and other devices) work fine to this day. It was tough to get restarted but eventually I did. (I could not tell you what I did, it seemed to have a mind of its own). About two weeks ago, the Realtek adapter quit showing up in device manager. I am thinking it is a hardware probelem. I don't recall any updates and my anti-virus was uptodate. I took it to my geek and they tried to update and troubleshoot it through the ethernet connection which works well. Their diagnosis was a software problem and suggested I "refresh" my computer. If it did not work, then diagnosis started at $199. I paid $350 for the computer. Of course, I refreshed it and nothing changed. Any suggestions before I go back to a Dell?
    C855 Win 8 (6.2.92) Bios (6.6) i3-3120M @2.5 GHz

    i´ve the similar problem, i gave format to my laptop with windows 7 and change to windows 8 pro (64 bits), is a satellite c855-sp5266km, i tried to find the driver to network controller to this laptop but i can´t find, Is the only driver to install missing me. that the picture to the message, please help me
    Attachments:
    controlador de red.png ‏35 KB

  • Wireless adapter not recoginzed in Windows 7 - ThinkPad E420 1141 RK6

    In "Device Manager"  in "Networks Adapter" tab there is only "Realtek PCIe GBE Family Controller"In Control Panel - Network and Internet - Manage Wireless Nerworks I see "Wireless in not currently enabled" Fn F9 I press and see that 802.11 Wireless/WiMAX is on. I have downloaded and installed g1w212ww driver from  http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015011 - it did not helped. So how can I enable Wi-Fi?   

    Hi ihorko,
    Your machine should comes with ThinkPad 1X1 wifi card. Not Intel card. Please try update BIOS and re-try wifi driver, if problem remain, please contact local lenovo for further assistance.
    BIOS Update Utility for Windows 7 (32-bit, 64-bit), XP - ThinkPad Edge E420, Edge E425, Edge E520 and Edge E525
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014906
    ThinkPad 1x1 11b/g/n Wireless LAN PCI Express Half Mini Card Adapter for Windows 7 (32-bit, 64-bit)
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014964
    Fred

  • Windows 2003 on T61 wireless adapter not showing

    I have 7658( CTO) T61 with XP pro.... I downgraded windows 2003 enterprise edition SP2. i have few questions
    1. I changed the bios to compatibility mode ( I keep sata then win 2003 not booting, so changed to compatability  mode). Is it required that I keep compatability mode.?
     2. Wireless adapter is not working ( not showing at all). It is PCI\VEN_168C&DEV_1014&SUBSYS_058A1014&REV_01\4&29E2C51B&0&00E1
    I downloaded and tried many drivers from lenovo website but is not working.
    I have struggled for a week and searched many forums but nothing is helping me out. Please help me.

    You will need the Windows 2003 compatible SATA drivers to stop using compatibility mode. I don't know if they exist... good luck there. Try Intel's web site since you probably have an Intel chipset.
    As for the wireless adapter, again it may be a matter of Win2003 not recognizing the device. I would try and manually install several drivers and see which one may work. You may have to force-feed Win2003 since it doesn't recognize the hardware. Be sure you know the manufacturer of the wireless chip... Intel or Broadcom or Atheros? Look at the specs for your laptop.

  • T500 - Internet Wireless Adapter Not Detected

    I am at a loss right now since I have never encountered a problem with a computer that I couldn't solve at all. On my T500 (2081CTO), I had an XP OS and everything was working fine (almost). I decided to install the original Vista that came with it and at the same time updated the BIOS to the latest version, I think 3.18, before I installed Visa Home Basic. After the install, there is no wireless adapter deteced. I can't get any internet without a cable. Here is everything I have tried already:
    Install all Vista OS updates
    Run Lenovo System Update
    Install standalone Wireless drivers from Lenovo directly
    Resintall the drivers
    Physically remove, clean, and re-insert the wireless adapter
    Check settings in BIOS to make sure all wireless devices are enabled
    Disable and then re-enable wireless LAN/WiMax in BIOS
    Clear CMOS
    I don't know what else to do, besides some costly and time consuming options, like reinstalling XP instead, getting a new adapter, or paying someone to fix my own computer.
    Here are some additional clues:
    Under device manager, only Intel 82567LM Gigabit Network Controller is listed under "Network Adapters"
    There is "Other devices" under which there is "Network Controller" with an excalamation mark. I have been unable to install the dirvers for it
    Finally, I do not have Lenovo recovery disks and had to install Vista from a downloaded version online. At the end of the install is asked me to install drivers, which I thought sounded weird, and chose not to. If I have to pay $30 to get a replacment disk for something I already own, I'd rather buy Windows 7.
    So this is my dilemma and I am not sure exactly where my problem is. I would appreciate any help or insight.

    You probably just need to download & install the drivers for the WiFi card... (You probably also need the drivers for some other devices as well, such as AMT and Card Reader, IIRC) You can get them on the Lenovo Driver download page, http://support.lenovo.com - (Drivers & Downloads) just put your MT/M number (from a label on the bottom of the laptop) in the "QuickPath" Product selector... (If you can't find the MT/M just put T500 in.) Then look for Wireless LAN drivers... If you haven't already done so, I'd suggest getting a copy of the Windows 7 Pro Recovery discs for the laptop and THEN install the afore mentioned drivers... Feel free to send me an e-mail if you have further questions about this... Just remove the spaces, change ATsymbol to @  and change DOTsymbol to . mkingsmill ATsymbol gmail DOTsymbol com I will do my best to reply on the forum for all to see (thus helping others who may also be researching solutions to this issue)

Maybe you are looking for

  • Broken Extensions in 7.0.6

    Hello, I got a brand new Mac with OSX Mavericks on it just last week. Installed any updates I had from the App Store and I'm running Safari 7.0.6 (9537.78.2) Extensions seem to be broken in a way. Usually it involves a new tab being opened and just d

  • Invalid Handle SQL Exception

    Everytime I call this method from my JSP page, I get the error Invalid Handle. I changed my query statement at the most bottom part to a hard-coded update statement (this one update wirtech.orders_temp set BOOKCODE ='12345678', QUANTITY = '150', SUPP

  • How do you change the default location of the library xml and other related files?

    After the most recent software update of iTunes for Windows, the new software resorts to going to a folder on my hard drive for the files that determine your library: \Users\username\Music\iTunes\iTunes Library.itl \Users\username\Music\iTunes\iTunes

  • Change Master page of a site using ECMA Script in sharepoint 2010

    Hi All, I'm working on SharePoint 2010. I have a requirement where in I need to create a site and apply a particular master page to the newly created site using ECMA Script. The site gets created but while applying the master page it gives me an erro

  • NetStream

    Hello! I try to make a video player using NetStream, NetConnection and Video all from flash. My problem is that I don't know how to get totalTime for a video, can anybody help me with that? I work with Flex 2. I use that for the initialization for Ne