BDT Custom Table fields Update

Hi Friends ,
Using BDT, i created one tab in BP transaction and also i created two custom fields in Structure BUT000,
In PAI , I am using BUP_BUPA_BUT000_COLLECT to store screen values to the table BUT000
In PBO I am using BUP_BUPA_BUT000_GET to get database values .
i try to save values to the custom fields , But values are not stored in BUT000 table custom fields .
BUP_BUPA_BUT000_COLLECT
export parameter i_subname ( what value i have to give )
is there any other steps have i need to follow .
Pls give valuable suggetion
Regards
Krishnan R.

Hi ,
Using BDT, i created one tab in BP transaction and also i created two custom fields in Table KNA1,
Can anyone help how to update the Values from Screen to the database table (KNA1)

Similar Messages

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

How to populate custom table field value into standard DFF

Hi Gurus
I am newbie to the OAF
I have a requirement to populate the custom table field value into standard DFF. we enabled the DFF in ReqDistDFFOnAcct(po_req_distributions_all). On the requisition tab as soon as i click on the checkout button, the custom field value has to be shown in the requisition distributions DFF field along with the standard Columns like charge account, percent, qty and when we click on the next button, it has to hit the base table ie., po_req_distributions_all.
the standard columns data is showing the screen. how to acheive this requirement programatically
There is a EO for the req distributions table. please help me how to achevie this requirement.
Any help woud be greatly appreciated.
Thank You!
Krishna

Thanks Aj. Finally i made some progress....but i am getting an error in the inst_top OPMN folder 10/10/08 15:37:14 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml. I cleared the cache, bounced the webserver. Could not able to understand what is this error
Following is the code that i have written. I am not able to find out what is the error. please help me how to fix this error. there is no changes in the page and the value is not auto populating. the page is having the normal behaviour as the standard one.
Thanks in Advance for your help...
public class xxCheckoutDistsCO extends CheckoutDistsCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String UnitId="";
//First get the Application Module
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("PoRequisitionLinesVO");
String Reqlineid="";
String Linenum="";
String DeliverLoc="";
if(vo.first() !=null)
Reqlineid= vo.first().getAttribute("RequisitionLineId").toString();
Linenum = vo.first().getAttribute("LineNum").toString();
DeliverLoc = vo.first().getAttribute("DeliverToLocationId").toString();
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", Reqlineid,1);
// pageContext.writeDiagnostics("TEST >", Linenum,2);
// pageContext.writeDiagnostics("TEST >", DeliverLoc,3);
UnitId=null;
String Querry="select amli_icx_oaf_utils.get_blding_unit_id (?,?,?) from dual";
try
PreparedStatement ps=am.getOADBTransaction().getJdbcConnection().prepareStatement(Querry);
ps.setInt(1,Integer.parseInt(Reqlineid));
ps.setInt(2,Integer.parseInt(Linenum));
ps.setInt(3,Integer.parseInt(DeliverLoc));
ResultSet rs=ps.executeQuery();
// ps.execute();
// am.getOADBTransaction().commit();
while (rs.next())
System.out.println(" Query Results ");
UnitId= rs.getString(1);
System.out.println(" first > ");
rs.close();
ps.close();
catch(SQLException a)
System.out.println(" Error "+a);
System.out.println(" Second > ");
System.out.println(" Third > "); ----the program is executing upto here...it is not setting the value after this.
OAViewObject povo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
if(povo.getCurrentRow()!=null ) --------If i remove this condition i am getting the nullpointer exception in page.....
System.out.println(" Fourth > ");
povo.getCurrentRow().setAttribute("Attribute12",UnitId);
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", UnitId, 1);
Thanks
krishna

Tracking the changes made to the custom table field value

Hi all,
can we track the changes made to the custom table field values. if yes..plz specify how it can be done.
Example: if i changed the value of field 'NAME' of table 'YYHCUSTOMER'. i would like to know the old value and the new value of the field. For this, I set the flag 'LOG DATA CHANGES' in the technical settings of the table 'YYHCUSTOMER'.

-> try TA: SCU3
regards Andreas

How to capture userid,date in a custom table while updating a form

Hi,
I have a requirement to insert the userid, the form name and the date on which the record is saved in a custom table while updating a custom form.
We are using Form Builder 6.0.
I am new to Forms and can anyone help me with these?
I would also want to know under which trigger i should be writing the code in.
Thanks in advance.

you can use:
usrid := get_application_property(username);
formname := get_application_property(current_form);
dt := to_char(sysdate,'dd/mm/yyyy hh:mi:ss');
you insert these values in on-update trigger at form level

How to maintain default values for custom table fields -- Urgent

Hi all,
I've a requirement wherein i need to create a Z table (with maintainence view) in which i'll have date and time as two of its field which should have current date and current time as default value. Can somebody suggest as how am i to maintain the date and time fields defaulting to current date and current time.
Incase if someone is unable to intrepret what i'm trying to say, please query me, i'll elaborate it further.
Please give in your quick inputs which is highly valuable to me and also will be highly appreciated.
Thanks in advance,
Vaishnavi Varadarajan

We have a following custom table which contains the fields Date on which record was created and Name of the person who created the object. We would like to have these to be filled up with SY-DATUM and SY-UNAME respectively.
Using the events, we can achieve this.
Please refer the following link:
http://abapliveinfo.blogspot.com/2007/12/events-in-table-maintenance-in-sap.html
Also,
Write a form routine in table maintanance generator.
1. SE11 > utilities > table maintenance generator
2. environment > modification > event
define the event and form routine to make use of the tigger. in the form routine define an object for the class and call the relevant method.
Or u can do it as:
Table maintenance generator is basically used to do table operations like (insert, delete, modify...).
if you create table maintenance for your table it will build a module pool program, by using you do the above operations.
below is the procedure to create table maintenance generator.
1) Create one function group.
2) after activating your Ztable, choose 'Utilities'----> 'Table maintenance genrator'.
3) then give the authorization group and function group created abobe in the next screen.
4) Then choose the "create" button in your application tool bar, which will creates the module pool program.
5) then create one Tcode by chosing "Transaction with parameters( parameter transaction)".
6) in transaction field give "SM30", select the check box "Skip initial screen".
7) in the below of that screen you can find the "Default values" frame.
8) there under the "name of screen field" select the "View name' and 'update".
9) in value column against to "view name" give you table name, and against to "Update" put 'X' in capital letters.
save it then you can straight away use this newly created Tcode to maintain your table.
Note:- 1) make the modification while saving the data into your table using this newly generated program to carry out your validation (even though it looks like standard program; no need to enter the access key).
2) if you do any changes to your table and press the activate button automatically the table maintenace generator will be goes off, you need to create this again.
cheers,

F4 help for custom table field - to be used when populating data thru SM30

Hi,
I have a custom table with 5 fields - say A, B, C, D and E. While populating data to the table through SM30, I need to create a F4 help for the field C. A custom function module needs to be used.
I have created a module for the same in the event PROCESS ON VALUE-REQUEST of the function group of the table.
But the F4 for field C depends on the values put in fields A and B.
I am not able to get the values of fields A and B from within the module PROCESS ON VALUE-REQUEST.
Please help me to create the F4 help.

hii,
This is the piece of code i have used in one of my SM30 to get f4. mopdify according to ur need and use.
revert back for further help.
w_dynpread-fieldname = 'ZSITEDCDATA-SITE'.
APPEND w_dynpread TO i_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = 'SAPLZSITEDCDATA'
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = i_dynpread
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE i_dynpread INTO w_dynpread INDEX 1.
IF sy-subrc IS INITIAL.
    SELECT land1 FROM t001w
      INTO TABLE i_site
      WHERE werks EQ w_dynpread-fieldvalue.
    IF i_site[] IS NOT INITIAL.
      DATA: lv_line TYPE i.
      CLEAR lv_line.
      DESCRIBE TABLE i_site LINES lv_line.
      IF lv_line GT 1.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield        = 'ZSITEDCDATA-SITE_COUNTRY'
            dynpprog        = 'SAPLZSITEDCDATA'
            dynpnr          = sy-dynnr
            window_title    = 'Site Country'
            value_org       = 'S'
          TABLES
            value_tab       = i_site[]
            return_tab      = i_return
          EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          READ TABLE i_return INTO w_return INDEX 1.
          IF sy-subrc IS INITIAL.
            zsitedcdata-site_country = w_return-fieldval.
          ENDIF.
        ENDIF.
Thanks ,
Gaurav

Updating Custom table when updating infotype

HI
A custom transaction needs to be created for maintenance of the table in future as the values could change. Whenever infotype 0015 values are changed are updated this custom table values should need to update.Could you please suggest me..

I also suggest you to lock only the entry that will be updated (and not the whole table!) : you will have then far less problems of conflict with updating this table.
For that, you have to create a lock object on your table (via SE11 - for example EZ_MY_TABLE). This will create 2 function modules named ENQUEUE_E<name of your lock object> (in my example ENQUEUE_EZ_MY_TABLE) and DEQUEUE_E<...>.
You can then call those FM like this :
CALL FUNCTION 'ENQUEUE_EZ_MY_TABLE'
EXPORTING
    MODE_RSTABLE = 'S'
    KEYFIELD1 = ld_keyfield1 " Here are the key values for the entry that you have to update
    KEYFIELD2 = ld_keyfield2
EXCEPTIONS
    FOREIGN_LOCK = 1
    SYSTEM_FAILURE = 2
    OTHERS = 3.
Best regards,
Samuel

Restrict Blank value in a custom table field.

Hi All,
I have a custom table with some fields with check table search help. One of the field I want to make it value required field. For example Field u2018Cu2019 should have value (no blanks or Spaces). Field u2018Cu2019 has a check table search help and master data table does not have any blank value. Field u2018Cu2019 is not a key field. Suggestions in this is highly appreciated.
Ram.

Hi Ram,
You can create a Table Maintenance Generator for you custom table and you can use to TMG events to put a check the the field 'C' should not be initial.
Refer to the link for TMG events
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=93454609
Regards,
GP

Creating checktable for custom table field

Hello Guys,
Can anybody explain me steps involved in createing a check table for the field in
ztable.if possible can u send me link with screen shots.
your help will be greatly appreciated.
Regards
Janapathi

Check table
check table and value table
For example you have Employee master table & Employee Transaction table.
When ever an employee Transacts we need to check whether that employee exists , so we can refer to the employee master table.
This is nothing but a Parent & Child relationship . Here data can be maintained at client level , no development involved.
As per DBMS what we call foregin key table, is called as check table in SAP.
1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.
But the contents of Value Table are never used in Input Help.
The Heirarchy which decides from where to used the Input Help is:
1. Input help defined explicitly in ABAP Program or Dialog Module.
2. Input Help Attached to the referenced Database Table field.
3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.
4. Input help from Fixed value or Value range given in Domain.
Check Table: The ABAP Dictionary allows you to define relationships between tables using foreign keys . A dependent table is called a foreign key table, and the referenced table is called the check table. Each key field of the check table corresponds to a field in the foreign key table. These fields are called foreign key fields. One of the foreign key fields is designated as the check field for checking the validity of values. The key fields of the check table can serve as input help for the check field.
Value Table: Prior to Release 4.0, it was possible to use the value table of a domain to provide input help. This is no longer possible, primarily because unexpected results could occur if the value table had more than one key field. It was not possible to restrict the other key fields, which meant that the environment of the field was not considered, as is normal with check tables.
In cases where this kind of value help was appropriate, you can reconstruct it by creating a search help for the data elements that use the domain in question, and using the value table as the selection method.
Check table will be at field level checking.
Value table will be at domain level checking ex: scarr table is check table for carrid.
also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/e2/667092730811d2959500a0c929b3c3/content.htm
http://www.abapmaster.com/cgi-bin/SAP-ABAP-interview-questions.cgi
Re: check table and Value table

AFVV Table fields update

Hi All,
I want to update fields of AFVV table like FSAVD, FSAVZ (Early start date & time), SSAVD,SSAVZ (Latest start date & time) ...Is there any Standard BAPI or FM available for this.
Pls help.
Regards,
Balaji.

Could you please share the solution?

How to custom table field to be sortable at core form

Hi,
Can anyone provide the hint for the captioned topic.
Example, R11i PO autocreate document form, column 'Requestor' is not sortable, how to custom it to be sortable?
Thanks in advance.
Rgds,
CY

Hi,
Try this way,
You shouldnt be writing two select statements into the same internal table. Also i dont see any use of perform getpr. so remove that and try
DATA: BEGIN OF leban OCCURS 0.
INCLUDE STRUCTURE ekpo.
DATA END OF leban.
DATA: BEGIN OF leban1 OCCURS 0.
INCLUDE STRUCTURE ekpo.
DATA END OF leban1.
DATA new(1).
SELECT-OPTIONS ldat FOR sy-datum. "NO-DISPLAY.
parameters lopen like new AS CHECKBOX USER-COMMAND opn.
parameters lclose like new as checkbox user-command cls.
at selection-screen.
if ldat is initial.
message 'Enter a value' type 'W'.
endif.
IF LOPEN = 'X'.
select single * from ekpo into leban where PRDAT IN LDAT AND banfn = lopen.
if sy-subrc = 0.
message 'PR OPEN' type 'S'.
ENDIF.
WRITE: / LEBAN-BANFN.
endif.
if LCLOSE = 'X'.
select single * from ekpo into leban1 where PRDAT IN LDAT AND banfn eq space.
if sy-subrc = 0.
message 'PR CLOSE' type 'S'.
ENDIF.
WRITE: / LEBAN1-BANFN.
ENDIF.
Regards,
Vik
Edited by: vikred on Aug 7, 2009 6:55 PM
Edited by: vikred on Aug 7, 2009 7:23 PM

How to add F4 help for the custom field of a custom table

Hi All,
How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
PROCESS ON VALUE-REQUEST.
FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
Thanks&Regards
mahesh

Hi,
Create a subroutine under the event and call the following FM
1. Select all the related data into an itab, for ex i_kunnr
2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    DDIC_STRUCTURE         = ' '
       retfield               = 'KUNNR'
    PVALKEY                = ' '
       dynpprog               = sy-repid
       dynpnr                 = '1000'
       dynprofield            = <selection screen field>
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
       value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
      TABLES
       value_tab              = <b>i_kunnr</b>
    FIELD_TAB              =
       return_tab             = < return table >
    DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error        = 1
       no_values_found        = 2
       OTHERS                 = 3

Issue in Modifying custom table

Hi Experts
Program Y00_MM modifying custom table Y00_IFS074 using internal table.
we have a sales company code field in table.
Internal table company code value is 00021345 .
But in custom table it updated as 21345. It should be 00021345.
few days back no problem with table updation. Now only i'am getting this issue. There is no changes in Report.
Kindly help me.

Hi,
Please use the below FM for the field BUKRS.
FM : CONVERSION_EXIT_ALPHA_OUTPUT.
This FM will add the leading zeros according to the field length.
Hope this will resolve your problem...

T Table field attributes

Hi All,
Is there any function module to get the custom table fields and associated T table fields
I have requirement to get the fieldname and its full attributes and if any T table is associated the custom table, the i need to get the fieldname and attributes of T table also.
Thanks
aRs

Please check the modified code.
report zrich_0001 .
data: idfies type table of dfies with header line.
data: p_txttable type dd08v-tabname.
parameters: p_table type ddobjname.
call function 'DDIF_FIELDINFO_GET'
     exporting
          tabname        = p_table
     tables
          dfies_tab      = idfies
     exceptions
          not_found      = 1
          internal_error = 2
          others         = 3.
loop at idfies.
write:/ idfies-fieldname, idfies-position,
         idfies-rollname, idfies-fieldtext.
endloop.
call function 'DDUT_TEXTTABLE_GET'
exporting
    tabname          = p_table
importing
   texttable        = p_txttable
*   CHECKFIELD       =
skip 3.
call function 'DDIF_FIELDINFO_GET'
     exporting
          tabname        = p_txttable
     tables
          dfies_tab      = idfies
     exceptions
          not_found      = 1
          internal_error = 2
          others         = 3.
loop at idfies.
write:/ idfies-fieldname, idfies-position,
         idfies-rollname, idfies-fieldtext.
endloop.
Regards,
Rich Heilman

BDT Custom Table fields Update

Similar Messages

Maybe you are looking for