BDT - Question about the correct approach.

Hi,
We are already live with SAP CRM but there is a new requirement to add a new checkbox to the BP transaction to be held against each business partner.
This flag is to be used to flag a Sold-To Party as a certain type of customer.
If I extend BUT000 by creating a new field on an append structure is this risky as we are live with CRM.
Or is a better approach to create a new Z table e.g. BP Number and Flag as the fields and enhance the BP transaction this way?
Many Thanks
David

Hi David,
For your current requirement, it is better if you try adding new fields to Business Partner through Easy Enhancement Work bench, (transaction eewb ).
Using the Easy Enhancement Workbench (EEW) for business partner in SAP CRM you can easily extend the data model of business partner by new fields or tables and integrate them in the business processes.
For more information on the steps involved in adding a new field in Business Partner and other useful information, please go through the link provided below:
[http://help.sap.com/saphelp_crm50/helpdata/en/81/1d5303c023da438e792316c9d25a84/content.htm]
Wish this is useful to you
regards
Srikantan

Similar Messages

Some questions about the correct way to recharge the zen micro batt

Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
Ok...my question--
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
I know this is a long post but can someone tell me the correct way of charging?
Thanxs!

immunophilic wrote:
Ok..i don't think this is convered in the FAQs.
I copied this from the FAQ----At the present moment, the only possible way to avoid the standby loss is removing the battery after you finish listening to music. Gi'ven the wear and tear resulting, this is not really an option. It will help, though, if you prime your battery correctly, recharge it often (topping it up, not only resorting to full recharges),
This is from JazzMC's FAQ right? (I added a link to this a day or two ago from the main FAQ post) I hadn't spotted this before and I don't agree with most of this. The wear and tear is minimal, but it's more a case of practicality that removing the battery is a pain. Also priming is not really that important with Lithium Ion, and topping up won't make any difference to the battery drain.
) to preserve battery life span, shouldn't we wait for the player to die off complete, for example when it starts to display "low battery" before we recharge it's Does this post mean that we shouldn't actually wait for the battery to be complete;y drained off before a recharge? Does it mean we should always recharge, say when there's one bar left?
Look in my Nomad Primer, which is essentially a distilled version of the information from BatteryUni'versity.com. Top-up charges prolong the life of a Lithium Ion battery. These are all reference in the FAQ.
2) Before doing any music transfer using the computer, should we always make sure the zen micro was fully charged first before the transfer since USB port also serves as a charger. I tried using a completely drained player before music transfer and the player stops charging after 3 hours, which shouldn't be the case because USB always take a longer time to charge (i was told twice as much) and true enough, after deplugging from the USB port, the player starts charging again. Note that this always happen, meaning i can never get a complete 5 hours charge using the USB. What is wrong? And after such charge from USB, i noticed that the battery life the next day is like one third of what it usually last when i charged it through a charger...
Because of the Micro's design there will always be a difference in the amount of power it can pull via USB vs. the drain when copying files to it. USB is slower to charge than the mains adapter, but it should charge fully given time (which could be twice as much as using the mains adapter).
There is a known issue with the battery draining on the Micro, but you should know this having read JazzMC's page. This is the reason the battery is so low the next day.

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Dear Customer Service Team, I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

Dear Customer Service Team,
I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
Thank you for your help in advance.
Kind Regards,
G. Zsolt

There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
You may also refer below link
Sign in, activation, or connection errors | CS5.5 and later

Question about the BlackBerry 8520 Unlocked

Hi all,
I've a question about the BlackBerry 8520.
I saw it's being sold as unlocked and I'm wondering if once I buy it I need to have a particular carrier plan to use it or if I can simply use my pay as you go At&t plan.
So far I didn't buy any smartphone, iPhone, Android and so on because I don't want to be forced to add a monthly plan, that by the way usually is not cheap here in LA (around $70-$90 per month). But I'd like to have a BlackBerry as I guess I could use, even without the usual carrier plans, most of its features (but please correct me if I'm wrong).
So, basically the question is: would it make sense to buy the 8520 even with my basic "pay as you go" plan?
Thanks for any info.

Haha... so, probably whatever I write in this forum it doesn't matter. That's nice, it could be the perfect place where I can just rant or write anything that comes to my mind. Cool, I'll keep you guys updated. Stay tuned, some good rant coming soon!

Question about the order to creating Account, Contact, Contact Role

Hi, my friends,
I have some questions about the order of creating Account, Contact, Contact Role, etc in Web Service 1.0. I could create them in the following case:
1. Insert Contact object and get contactId (now new contact exists in CRMOD)
2. Insert Account object with Contact Role child associated with contactId
My questions are:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?
Thanks
Ray

Hi Ray,
In response to your questions:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).No. Both the Account and Contact must already exist. The Role value is an attribute on the Account Contact relationship, this relationship must exist in order to assign a role value to it. This is consistent with the behaviour of the UI, when you press the New button on the Contact child applet, you are taken to the Contact New page where you can create a Contact record. Once you save, the relationship is created but you cannot assign a role value unless you click the Edit Roles link next to the new Contact.
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?Correct, the system needs to know which Account/Contact pair is being assigned a role value. To do this the Account and Contact values must be uniquely identified using the Id values for each.
I hope this helps.
Thanks,
Sean
Edited by: Sean Duffy on Jan 25, 2010 10:11 AM

[Zen Micro]Questions about the Firmw

Hello,
I have some questions about the firmware of the Zen Micro
. Can I use the Zen Micro without any Software (MediaSource?) on my PC (winXP) when im using the Firmware Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 ? This means that i copy my Music only by drag&drop from the Explorer after my Computer has detected the Zen Micro as a Removable Disk!
2. I know that the Zen Micro has two parts with the Normal Firmware. The "Removable Disk" Part and the "Playable" Part which can only used by the Software! But what happens if my . question is right. How can i seperate this two parts?
Thanks for answers

I don't have the 2.x firmware, but I think I'm correct in saying this :
with the 2.x firmware, your Micro becomes an MTP compatible device, which can be recognized on PCs having an MTP compatible OS (operating system). For the moment, the only OS that fits the bill to my knowledge, is Win XP with Windows Media Player 0. In this combination of MTP device + MTP OS, you don't need to install other drivers, and you can do drag and drop
BUT ! The 2.x firmware doesn't make your device a "removable disc" in the traditional sense of the word. It doesn't become a file system, like a USB memory stick.
I hope I was clear enough to see the difference :-)Message Edited by fred_be9300 on 04-03-2005 02:52 AM

A question about the option Reset All Settings

Hello, I have a question about the reset all settings function in the IPad. I need to keep all of the installed applications on the device yet I need to remove any log in information and contacts. Is this the correct option or would the Erase All Content and Settings be what I want?

If you read the OP's request, they "need to keep all of the installed applications on the device". Selecting "Erase All Content and Settings" will do just that, erase everything.
Faroff, you can remove accounts in Settings/ Mail, Contacts, Calendar ... that would remove contacts only if the contacts were synced to such an account. If contacts were synced from iTunes, you'd have to un-sync them from iTunes by changing the sync settings. If the contacts were just manually entered and not synced with anything, you have to delete them one by one. However, iOS will remember past usage of a contact, so even if you remove them they may be recalled by you initiating an email or iMessage to something close to what used to be in the Contacts app. The only way to clear that I think is to do a full erase of the iPad.
As for log-in information, go to Settings/ Safari/ Passwords & Autofill, where you can erase passwords and saved credit card info. You can also clear cookies and data in this menu.
You might be better off doing a full erase of the iPad. Why do you not want to remove the apps? You can re-sync them from iTunes or re-download them if necessary. Or did you inherit this device from someone else and you're wanting to keep their apps installed but remove their private information?

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

BDT - Question about the correct approach.

Similar Messages

Maybe you are looking for