BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

Similar Messages

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Error in Source System while running the Full Load

HI Experts,
We are using 0CRM_UT_SRV_CONT_I datasource from CRM to extract data.
It is giving error while running the full load as 'Error Occured in Source system' with messaage Number : RSM340.
I want to mention certain points here:
1) In RSA3 its running fine.
2) Connection between BW and CRM system is OK.
3) We have replicated datasource and send active veriosn from Dev system.
4) When I run Init without data, Init set sucessful with entry in RSA7 in CRM.
5) Delta run fine with green status.
6) As source system is static client, hence do data for delta.
The Main issue happens when we run either the Full load or Init With Data transfer.
Kindly suggest.
Thanks
Mayank

Hi Mayank,
see in source system (CRM) with transaction SM21 and ST22 the error log and and then you let us know.
Charly

Error occured in the Source system while loading mater data

hi all
While loadng the master data info package.The request is getting failed with error occured in the source system.
error message says "<b>if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request</b>".
   I had tried repeating the Request but again It is getting failed.
   please help me resolving the issue.
Thanks(=Points)
      Priya

Hello Priya
If u r loading thru flat file
1. Check the correct path in infopackage
2. Check if it is opened,if it is then close it and run package again
If loading thru R/3
1. Check DS is not opened in change mode
2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
3. Are you running init..then make sure no document is posted in R/3 side...
Thanks
Tripple k

Error in the Source system while data loding through Process Chain

Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
Javed

Hi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani..

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

Error in receiver SAP system , while reading the xml received over Proxy

Hi,
I am having one FTP to Proxy scenario, receiving complex XML file at FTP and have to pass this exact file to proxy in a single field.
As no mapping is required, created a data type with single node and both sender and receiver end.
After executing scenario, Data is displayed properly in PI moni, but when the file is received at SAP end, its giving error in SAP system moni that
"Error during XML => ABAP conversion".
The same scenario, when we are executing using SOAP or Mail sender adapter and proxy receiver, the interface is working fine at both ends.In SOAP and mail scenario, they are sending XML data enclosed in SOAP envelope.
but when the data is received at PI, the SOAP envelope is removed, and CDATA is being read by PI, and interface working fine.
Please provide your inputs in case of FTP sender.
Thanks,
Ruchi

Hi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi

Data Source 0HR_PA_0 Syntax Error in the start routine while activating

Hi All,
I have migrated the Business content for the data source 0HR_PA_0
While activating the transformation-2 there is errors like:
Start Routine: Syntax error in routine
Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
Rule (target: 0AGE_KYF, group: 01 Standard Group): Syntax error in routine
.................... etc
I need help to resolve this issue.
Thanks & Regards,
Savitha

Hello Jurgita,
When Data Source was migrated the codes related to COMM_STRUCTURE was missing in the start routinue.
Following codes (in bold) with regard to COMM_STRUCTURE added and then got activated
4.     *--
5.         COMM_STRUCTURE   type tys_sc_1__rule_25,
6.         l_subrc          type sy-tabix,
7.         l_abort          type sy-tabix,
8.         ls_monitor       TYPE rsmonitor,
9.         ls_monitor_recno TYPE rsmonitors.
10.
11.       REFRESH:
12.         MONITOR.
13.
14.     * Runtime attributs
15.         SOURCE_SYSTEM = p_r_request->get_logsys( ).
16.         move-corresponding SOURCE_FIELDS to COMM_STRUCTURE.
17.
18.     * Migrated update rule call
19.       Perform routine_0011
20.       using
21.         COMM_STRUCTURE
22.       CHANGING
Regards,
Savitha
Edited by: Savitha Ravi on Jun 19, 2009 6:34 AM

Inbound idoc error in the source system

HI,experts
I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem seems ok since the source system is activated successfully in BW side.
But when I check the inbound the idoc in source system after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no control information in the idoc which message type is RSRQST.
how can i figure this issue out ?could anyone help me ?

HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Processing error occured in the source system

Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
In the source system apllication log the following warning message displyed.
<u>No assignment of payroll data to BW month for country grouping 99</u>.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
If any one come accross this , please provide good inputs....
Thanks & Regards
Kumar

I have the same problem.
The following text is ment to help me.
Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
best regards
Ingrid
Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
Diagnosis
No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
System Response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.

R/3 connection to BIW - No Idocs arrived from the source system

Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKy

Hi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky

"Error in source system" while creating source system

Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
Bettina

Hello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina

No Idocs arrived from the source system.

Dear All,
Please read this issue carefully.
Error Message is that
"No Idocs arrived from the source system."
In the Details Tab:
Trasnfer( IDOCS &TRFC):Missing Messages or warinings.
Request IDOC:Application Documnet posted from BW side and it is green..There is a request BW IDOC number sent to R3.
Where as an InfoIdocs 1:Sent not arrived :Data passes to the Port is ok.
Here i can see there is one idoc frm OLTP R3 side ansd no incomming idoc for BW side
I went to r3 side bd87 and found that idoc is posted well with status 53.
This is happing in Bw for each iinfopcakage is running?

Hi,
go through this link...
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noidocsarrivedfromsource+system&adv=false&sortby=cm_rnd_rankvalue]
System.-> Check RFC connection and clear/process stuck IDOCs.
Idocs Missing or No Idocs arrived from source
For this check the TRFC que(SM58).If any Idocs r strucked up there execute them manually.checkin sm58 transactions, you can check the status of your Idocs using BD87 in R/3. Idocs may not be processed because of load on system. You can process them manually from context menu.
And go to BD87 to process the idoc's ..
check which idoc has to process...select the idoc and click process ..Then It will push the data into the data targtes,
Hope it will help you;
regards,
NR

BE3.5 : Error from the source system while activating the transfer rule

Similar Messages

Maybe you are looking for