BE6k support for 2 UCCX instances?
Hello all, can anyone tell me if the BE6k BU supports 2 instances of UCCX on a BE6k? We have a customer with 40 agents in TX and 15 in CA and they currently have 2 UCCX systems. They only have 300 users in total and I wanted to migrate them to BE6k and add 25 additional users with the base bundle. They currently have separate UCCX systems in CA and TX. Can you confirm if TAC will support BE6k with 2 UCCX systems supporting a total of 55 concurrent agents? Do they have to combine their contact centers to a single UCCX instance to migrate to BE6k?
Thanks much,
Patty
Hi Patty,
For a fully supported BE6000 installation, only one CCX is allowed (allowing up to 100 agents).
However, under the extended terms of the hypervisor user policy (See the Co-residency policy), additional instances could be installed.
If possible, I'd recommend consolidation of instances in this case.
Hope that helps,
Andy
Similar Messages
-
Support for creating entity instances through rules
Hi,
Is there support to generate an instance of an entity purely through rules? For example, if I have an entity called "VerificationItems", can I write a rule in OPA that will one instance of this entity per verification item that the applicant needs to produce (like one instance for address proof, one instance for SSN etc).
Thanks
SamHi Sam,
Thanks! No problem. I understand completely your perspective, especially about the integration stuff.
In case more detail helps:
Each "action" we have has a clear naming structure and actually they all get aggregated up to global in the end using Exists() if the action is on a child entity. They are called action_1 to action_N where N is the total actions in the active delivery. The rule developers update this each time a release is completed.
N is a value set in the rulebase that the calling system can have access to, e.g. N=20. The calling system would then know to look in the response field the value of action_1 through to action_20, and do some further processing based on this. So if action_7 meant at "at least one address needs verifying", it would then look at the address instances returned in the response, and see which one(s) have address_action_7 also set. Both systems are aware of what the actions "are", but OPA contains all of the legal / business rules as to when that action should be raised, and the calling system interprets this and sorts out / transforms the data.
This works well and in terms of performance is optimised, but that said we will be looking at 10.4 and seeing what advantages it could bring over this approach.
Good luck with the implementation!
Cheers,
Ben -
Parameterized support for multiple database instances in CR 4 Eclipse
Issue with Database Schemas and Crystal Reports
When building a report with Crystal Reports, the user is required to enter database connectivity information. This database information allows the user to select which tables the information for the report will come from. When choosing the tables, the user must navigate through the available database schemas in the database connection to each table that is required. The database structure is described below:
Database Connector 1
Schema1
Schema2
Table1
Table2
Table3
Schema3
After the user has selected the appropriate tables, they are allowed to begin building the report. The user puts the necessary table fields onto the report. Crystal Reports uses only the required fields on the report to build a query to the database for retrieving the data. Thus, the fewer the fields on the report, the less information required. A single query is built by Crystal Reports to get all the data from the database. This query can be viewed from within the Crystal Reports application, but it cannot be changed by the user.
When viewing the query generated by Crystal Reports, you will notice that the tables will have the schema name attached to them. This is done as part of the fully qualified name of the table.
Processing a Crystal Reports report in a batch environment requires that the database connector that is stored inside the report be changed. This change is necessary due to the setup of our system. The name of the database server, the database username and the database password are different in the different execution environments. Our current implementation is to programmatically change these values before running the report.
The issue arises in that changing the database connector does not change the schema of the tables used in the query. The schema information in the query is hardcoded. Thus, when moving the reports from one environment to another, the original schema used is being propogated to the new environment, where the original schema is not appropriate.
Changing the database connector will, however, change the schema of the tables used in the field selector. Any field that is used from the field selector on the report or in formulas will change appropriately. But the fields used to create the initial query will not change.
The results of the schema not being changed appropriately in the query is when the report is attempting to populate with the Java environment, an exception is thrown and processing is terminated. When the exception is thrown, the entire process of populating the report is terminated.
Anyone know a solution to this?
Erik BleifieldWell, CSV would not be a preferred option.
We need to get the output to a report archive that only supports ascii text. We are hoping to preserve the output formatting of columns, etc. CSV would not preserve the formatting.
We are currently looking at outputting to PDF and then running a 3rd party product to convert from PDF to text. This leads to a good amount of formatting issues as well.
Why would exporting to text not be supported in Java? Where one can execute this manually in CR 2008 for Windows.
I wonder if this is intentional by product management choice - or a defect?
Thanks for further consideration.
Erik -
Problem: Adding support for non-english charachter sets in UCCX 8.0
We have just moved from windows-based UCCX 7.0 to UCCX 8.0, the upgrade process went successfully so far, but for some reasons, Cisco Agents are experiencing problems displaying non-english charachter sets, everything was working fine prior to upgrading to the new version.
Is there a way to add support for these character sets?
Thanks in advance.Hi Bala,
Follow the command. I believe that the space is normal.
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 90G 46G 41G 54% /common
8.0K /var/log/inactive/
admin:
admin:
admin:show diskusage activelog
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 90G 46G 41G 54% /common
8.0K /var/log/active/mgetty
0 /var/log/active/sa
4.0K /var/log/active/platform/snmp/sappagt/sappagt.index
4.0K /var/log/active/platform/snmp/sappagt/sappagt.log
4.0K /var/log/active/platform/snmp/sappagt/startup.txt
16K /var/log/active/platform/snmp/sappagt
4.0K /var/log/active/platform/snmp/hostagt/hostagt.index
Thanks,
Wilson -
EWS Protocol Support for Agent Email Integration on upcoming UCCX Versions
Hi Everyone,
One of my customer wants to know, In the upcoming versions of UCCX, whether the EWS(Exchange Web Service) protocol is supported for Agent Email Integration or not?
I have done some inital findings for the current versions & it supports only IMAPv4 (for message retrieval) and SMTP protocols (for message sending).
Thanks,
Kumar.VHi,
the way I would do it: Remedy would ask UCCX to place the agent into a specific Not Ready state (this prevents incoming calls) and then transfer a task to an agent. When the task is solved, Remedy would check for the number of calls waiting in UCCX and would leave the agent in Not Ready (and ultimately assign another task), or would change the agent state to Available.
If you want interruptible Remedy tasks (the agent is Available all along and when a call is transferred to him, the Remedy task automatically pauses) - I am afraid this is not possible.
About programmatic access to UCCX: if you have never heard about it, it's not easy - you might want to talk to a consultant.
G. -
Trying to buy single instance support for FMS from Adobe. Need help.
Hey all,
I've spent all day on the phone with Adobe trying to purchase single incident support for some server side developement questions on Flash Media Interactive Server 3.0.
So far I have not been able to find anyone at Adobe that knows how to do this. The web site says it is possible and they even give a number to call but I've talked to at least three people at that number and no one could help me. I've also talked to people in Sales, Volume license sales,and at least three different areas in technical support and no one seems to know how to get it done. Has anyone ever successfully purchased single incident support for FMS 3 and if so is there some specific number I could call to talk to someone who can make it happen.
-JohnI am answering my own question. After spending an entire afternoon on the phone being bounced around between Adobe technical support and Adobe sales, I've come to the determination that you cannot buy single incident support for Flash Media Server. At least I was never able to talk to someone at Adobe that knew if it was possible. The number on the web site where it specifically says to call for purchase of single incident support for FMS is not the correct number.
-John -
Using a Single HTTP Server for Multiple APEX Instances
Our company's DBA Manager has asked if it would be possible to externalize the HTTP server portion of APEX from the DB Servers. In other words, he would strongly prefer that the DB Servers *only* run Oracle Database software.
We know that we can install the HTTP server on another box but, in thinking about how to do this, we were wondering if it is really necessary to create a separate HTTP server installation for each APEX instance. What we'd really like to do is have one HTTP server for all our our Dev boxes and several (but, not one to one) for each of our upper environments; staging, qa, prod, etc.
Right now, each instance have a single dads.conf file on each DB box. So, if we we're to attempt to consolidate them, we'd need some way to embed multiple dads files and to associate each instance with the correct one.
Has anyone ever done this or (preferably) have some examples?
Thanks,
-JoeJoe,
I don´t know a specific reference for it, I remembered it because when I was looking the documentation on the site, I saw the reference "Support for multiple database connections" in the URL: APEX Listener New Features 2.0</title><meta name="Title" content="APEX Listener New Features 2.0…
I´ve tried to use APEX listener some time ago, but in a earlier version together with glassfish. So, since for me was only one database, I created the necessary amount of DAD´s on my database, each one for a specific port.
Check the link and you´ll see the same information I saw.
Thanks.
José Valdézio
"Neo, everything that Oracle told me, became true, except extinguish bugs in a first release." -
An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U -
At first i got a problem with my Apple Mobile Device Support, but then after i've done some research browsing the net on how to fix that problem, i've finally found the solution to that problem... However, after I've finish installing and trying to run ITunes, there's a pop up says Error 2 , Apple Application Support is needed to run ITunes.... So i've followed the instruction and suggestions given out which is to extract my iTunes64Setup and install Apple Application Support standalone manually, but during the installation, an error pops out that really really really could give me cancer.... the error goes like this-
""An error occured during the instilation of assembly "Microsoft.VC80.CRT,type+"win32",version="8.0.50727.6195"publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x80070BC9.""
God knows how many times i've reinstalled Itunes, and how many pages i've been thruu just to look for a solution to this problem..... PLEASE HELP ME IM BEGGING YOU TO WHOEVER HAVE ANY IDEA ON HOW TO FIX THIS T^T
Im running on Window 7 ultimate 64-bit btw...OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Support for virtual IP in WKA list
I am attempting to implement Coherence Grid Edition 3.5.3 Patch 7 . It's running on Sun Java 1.6.06 on a Solaris 5.10 machine (which I will call machine A1) which has an ip address 1.2.3.261. Also, there is a virtual IP address 1.2.3.260 which points to this same machine A1, as well as a hostname that maps to the virtual IP address of the machine A1.
(Note: I have mocked up the IP addresses in this post for security reasons).
I am using WKA due to concerns of the local network admins regarding multicast (debatable, but for now let's please assume I need to go with WKA).
If this production machine A1 develops any problem, we can quickly switch to an alternate machine A2. The alternate machine A2 contains automatically replicated copies of all of our important sub-directories (including the coherence xml configuration files), but it does have a different IP.
During a failure of machine A1, we would shut down machine A1, start up machine A2, and reroute the virtual IP to alternate machine A2's true IP. Machine A2 would be supplied a copy of the file-system that A1 had when A1 was shutdown.
We would seek to not have to edit any configuration files on A2. It is difficult to maintain alternate configuration files using our current replication scheme, and any machine-specific customizations are problematic.
Therefore, we would prefer to list the virtual IP of machines A1 and A2 in the WKA list, rather than the true IP of these machines.
However, when I attempt to list the virtual IP in the WKA list...
<well-known-addresses>
<socket-address id="1">
<address>1.2.3.260</address> <!--virtual ip -->
<port>8088</port>
</socket-address>
</well-known-addresses>
... I get the error below.
2010-09-03 12:01:51.464/1.401 Oracle Coherence GE 3.5.3/465p7 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2010-09-03 12:01:54.760/4.697 Oracle Coherence GE 3.5.3/465p7 <Error> (thread=Cluster, member=n/a): Node myhostname/1.2.3.261:8088 is not allowed to create a new cluster; WKA list: [1.2.3.260:8088]
2010-09-03 12:01:54.760/4.697 Oracle Coherence GE 3.5.3/465p7 <D5> (thread=Cluster, member=n/a): Service Cluster left the cluster
Exception in thread "main" java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:395)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:27)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:905)
at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:139)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:60)
2010-09-03 12:01:54.763/4.700 Oracle Coherence GE 3.5.3/465p7 <Error> (thread=main, member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:395)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
What exactly is being checked here? Does each Coherence instance expect to see it's own IP listed in the WKA list, and refuse to run if it can't find it's own IP on the list?
Is the instance detecting it's own IP via an operating system call, or is there some way I can influence the instance's sense of what IP it is running on?
Is there any advice for supporting this kind of virtual IP scenario?
I have tried listing the hostname with no better success, because the hostname points to the virtual IP, and therefore has the same effect as listing the virtual IP.
As a workaround, I have altered the WKA list to list of the true IPs of both machines...
<well-known-addresses>
<socket-address id="1">
<address>1.2.3.261</address> <!-- A1 -->
<port>8088</port>
</socket-address>
<socket-address id="2">
<address>1.2.3.262</address> <!-- A2 -->
<port>8088</port>
</socket-address>
</well-known-addresses>
... even though both machines will never be up and running at the same time. This workaround avoids the error and the cluster appears to come up. I am not sure if there's any ill effect that at any given time one of these two IPs will never be up and running.
Despite my workaround, true support for virtual IPs would be superior; listing all the true non-virtual IPs in the WKA list means re-editing the list as the hardware changes.
Thanks for any advice!
P.S. I tried the above with Coherence 3.5.2 with the same results.
Edited by: user11114413 on Sep 3, 2010 11:45 AMHi user11114413,
The issue you are seeing actually has little to do with VIP, and more to do with there being multiple IP addresses for us to choose from on your box. For such multi-IP boxes, you'll want to tell us the IP to use, and in your case you want to tell as a VIP. This can be done either by editing your operational configuration file, and including an <address> element within the <unicast-listener> element, or via the tangosol.coherence.localhost system property. For example:
<unicast-listener>
<well-known-addresses>
<socket-address id="1">
<address>1.2.3.260</address> <!--virtual ip -->
<port>8088</port>
</socket-address>
</well-known-addresses>
<address>1.2.3.260</address> <!--virtual ip -->
<port>8088</port>
</unicast-listener>or
java ... -Dtangosol.coherence.localhost=1.2.3.260If you are using the same operational configuration on all nodes in your cluster then the system property approach is likely preferable, and would only be necessary on the two machines sharing the VIP.
As for using VIP or an extended WKA list, the choice is yours, either will work. If you do go the VIP route, it would obviously be a very bad idea to simultaneously use the same VIP and port at the same time from the two machines.
thanks,
Mark
Oracle Coherence -
Call upon even better support for Unicode
Hello
Following some messages I have posted regarding problems I encountered while developing a non-English web application, I would like to call upon an even better support for Unicode. Before I describe my call, I want to say that I consider Berkeley DBXML a superb product. Superb. It lets us develop very clean and maintainable applications. Maintainability is, in my view, the keyword in good software development practices.
In this message I would like to remind you that the US-ASCII 8-bit set of characters only represents 0.4% of all characters in the world. It is also true to say that most of our software comes from efforts of American developers, for which I am of course very grateful.
But problems with non US-ASCII characters are very very time consuming to solve. To start with, our operating systems need to be configured especially for unicode, our servers too, our development tools too, our source code too and, finally, our data too. That's a lot of configuring, isn't it? Believe me, as a Flemish french-speaking, danish-speaking developer who develops currently a new application in Portuguese, I know what I am talking about.
Have you ever tried to write a Java class called Ação.java, that loads an xml instance called Ação.xml that contains something like <?xml version="1.0" charset="utf-8"?></ação variável="descrição"/>? It takes at least the double of time to have all this work right in a web application on a Linux server than it would take to write a Acao.java that loads Acao.xml containing <?xml version="1.0" charset="us-ascii"?></acao variavel="descricao"/> (which is clearly something we do not want in Portugal).
I have experienced a problem while using the dbxml shell to load documents that have utf-8 encoded names. See difficulties retrieving documents with non ascii characters in name The work around is not to use the dbxml shell, with which I am of course not very happy.
So, while trying not to be arrogant and while trying to express my very very great appreciation for this great product, I call upon even better support for Unicode. After all, when the rest of us, that use another 65279 characters in our software, will be able to use this great product without problems, will it not contribute to the success of Berkeley DBXML?
Thank you
Koen
Edited by: koenheene on 29/Out/2009 3:09Hello John and thank you for replying,
You are completely correct that it is a shell problem. I investigated and found solutions for running dbxml in a Linux shell. On Windows, as one could expect, no solution so far.
Here is an overview of my investigation, which I hope will be useful for other developers which also presist writing code and xml in their language.
difficulties retrieving documents with non ascii characters in name
I was wondering though if it would not be possible to write the dbxml shell in such a way that it becomes independent from the encoding of the shell. Surely their must be, not? Rewrite dbxml in Java? Any candidates :-) ?
Thanks again for the very good work,
Koen -
I was getting support for my Office 2008 for Mac, and the support tech said my OS was very slow. I have latest update for Snow10.6.7. Question; How can I speed up my Macbook?
Hi
In the first instance, I'd use Onyx and run through its sequence of maintenance and tune up tools:
Verify, Maintenance, Cleaning.
I'd also reset the SMC and PRAM (Google them)
If that doesn't help then I'd look at System Preferences.. > Accounts > Login Items tab (not Login Options). Check what processes get started at login and decide which ones you don't want.
After that I'd use Applications/Utilities/Activity Monitor to see if any processes are using a lot of computer power or if anything else nasty might be happening.
If none of this helped then my final step would be to reinstall OS X.
Bob -
Is it recommended to support multiple DBs and Instances on same RAC nodes
Customer wants to install multiple databases on the same set of 3-nodes essentially making all these database 3-node rac databases on Sun fire servers.
Is this a recommended approach? What are the pitfalls?
Can this be done effectively without using local containers (which are not supported for RAC)?The Customer would save significantly on Licencing if he does not have to add Processors into the three nodes.
Processor Based Licences don't count the number of databases and instances, only the number of CPUs (Processors).
Setting up seperate Clusters requires that many Processor Licences.
However, using multiple Standard Edition RAC installations (Linux and ASM) would have been another option.
I have run multiple databases on a single Cluster in 9iRAC. I am sure that there are customers running multiple databases in a single Cluster in 10gRAC. You'd have only one CRS and one ASM Home in each node but it may be possible to have separate Database ORACLE_HOMEs in each node as well. -
Support for DbXml specific functionality in XQuery vs. Shell or API
Is / will there be any support for doing common commands in pure XQuery rather than just programmatically or through the shell? For example, in the shell I can create / list / delete indexes on a container, output query plans, etc. Are the same functions that are called through the shell available as XQuery functions? possibly in a dbxml function namespace?
In a related question, but possibly deserving of a new thread if it doesn't already have one - I know XQuilla has the ability to call registered external functions from parsed XQuery, is there a way to tell DbXml to register a function with XQuilla's static context before using it? that would make it possible for me to add the functionality described above myself without disturbing your distributed code.Not so handy with C++ (my everday languages are PHP and Java), but if you say it can be done then I'll take a hack at it. If you happen to have examples of how other people have done it and you could point me at them it would be marvelous.
To answer your second question: "bingo." It mostly means less interface work and brings it closer to what SQL can do in relational databases.
The project allows the end user to define their own document structures (schema definitions more or less) and then create instances of these documents in a XML editing interface. For each document type, the end user is also able to define a set of named queries (abstracted function declarations) which lets us captures business rules without customizing our PHP code. Because the structure and queries that will be used against the documents are user defined its fairly impossible for me to automatically setup adequate indexes for the container of each set of documents. So I need an interface to allow the user to create / review / delete the indexes themselves.
We've already created an interface that allows the user to execute arbitrary queries against a selected document. In the future we'd also like this same interface to do result set based content updates (through the XmlModify class) and whole document addition / replacement. So inclusion of index control makes sense as well. We can find ways to use the APIs, it just seems like this could benefit more than just our project.
Placing the functionality from the shell into xquery extension functions seems analogous to having the UPDATE, DELETE and CREATE syntaxes of SQL.
Maybe you are looking for
-
No audio on Timeline Premiere Elements 13 and no longer on 12 after upgrading to 13.
On my Mac with OS X Yosemite I've worked with Premiere Elements 12 for a while and it just worked fine. Now I;ve upgraded to Elements 13 and the clips that were fine the other day have now lost there audio when I put them on the Timeline. However if
-
DB failed in transport tool test STMS
Hi all, I have a problem. It looks simple but I tried to resolve it with known way without sucess. I have two systems BWD (develop) and BWP (production). I configured in stms domain and transport group for these systems. Auth on DIR_TRANS is set prop
-
What function module is used to post application fees of an applicant in SLcM
Hi Experts, Can any one please tell me what function module is used to post the application fees to fico in student life cycle management? Thanks & Regards, Prashanti Swain
-
Acrobat X highlight the bookmarked area of a pdf
How do I make Acrobat X highlight the bookmarked area of a pdf when I select that bookmark?
-
Dear All, There is an issue with MSCS in our portals. We have two server with all the cluster resources,for DB ,SCS and OS level ,Qourum. We had a drive change for O drive and space was added ,by replacing it with new drive of extra capacity. Later w