BE6K supported options for voice conferencing

Hello All,
Does anyone know or understand why CUCM 8.6.2 on BE6K cannot support MeetingPlace 8.5? I could understand if its on the same UCS but I understand from Cisco SE the BE6K is not supported on box or off box when intergrated with MeetingPlace. My only options are to upgrade the BE6K to Full CUCM and CUC at a cost of 11.00(CUCM) + 11.00 (CUC) * number of users (Plus ESW+UCSS).
Thanks
Roger....

The idea behind the BE6000 marketing bundle is that it is designed to support up to 1000 users per system, given the lower cost C220M3 server configuration (SATA drives). In a Unity Cxn HA cluster running A/A, 500/500 would be ideal. If you place both Unity Cxn servers in standalone mode with 500 users each, I can't see that offering any different load on the system. So you should be ok, just realize if you separate the UCM cluster across a WAN, you also have a BW requirement to meet, although this is much less most likey - min 3Mbps but depends on your busy hour calculations. UCM BW requirement is discussed in the main UC SRND.

Similar Messages

Best option for video conferencing in ios app ?

I want to implement video conferencing in ios app. what is the best option for this?

There are several: Fuze, Webex, are a few. These two also have desktop components. Try looking in the app store and googling to see if you can also find reviews/suggestions and other options on the web.

Best support option for failing Bluetooth?

In the past few weeks or so, my Macbook has been losing bluetooth connectivity intermittently. I was hoping that somehow the 10.4.8 update would help, but if anything it's only gotten worse. Now it doesn't just happen when the laptop is hot, but also right after a cold boot.
Anyway, I'm fed up and was wondering what would be the best support option. Should I call Applecare or take it to my local genius bar?

So the problem was fixed at the Apple Store. They replaced my logic board and the bluetooth board + cable.
I have to say that I'm impressed with the support I got this time. They ordered the parts and let me keep my laptop until they came in. I called to check in with them after several days when I hadn't heard back from them and was told they were still waiting on a few parts. The guy called me right back after he checked in the days shipment to tell me that the rest of the parts were in. I brought the laptop in that evening and the repair was complete the next morning. Very nice.
I just wanted to throw that out there as I have posted my share of complaints about my MacBook here.

Is the "email customer support" option for MobileMe still disabled?

The support page indicates that an "Email Support" option will pop up when the chat is closed. Has anyone been able to do this?

The MobileMe forum area is here:
http://discussions.apple.com/category.jspa?categoryID=116
That's where those gurus hang out.

Remote support options for iPad?

We're looking at the iPad as a possible solution for a specific business case. However, I'll need some way to provide remote support to the iPad users. I've looked for VNC type apps but everything I've found just enables the iPad to be a client that connects to and remotely controls another system.
Is there a VNC server-like app for iPad that would let me provide remote support TO the device?

Since the OS on the iPad does not allow multitasking there is only one app running at a time. This would not allow a VNC server app to run.
Even with the preview of multitasking in iPhone OS 4 a VNC server would require access out of its sandboxed environment which it would not be allowed to have.
Another issue is that it is a multi-touch device that does not use a mouse cursor. I am not sure VNC can handle this.
Essentially what you are asking would be similar to someone controlling an iPhone remotely, since the iPad is much closer to an iPhone than it is to a computer.
A workaround may be to use video conferencing on a computer so that you can see the screen of the iPad, guiding the user through the steps required.

Lenovo support - options for recovering Windows 8 on new X230

Hello, I recently purchased x230 with Windows 8.
I installed Ubuntu 12.0 (attempting to dual boot). Unfortuantely, Windows 8 is no longer accessible(UEFI error comes up on boot), the restore partition is also corrup ("required partition cannot be found").
I attempted to install win 8 PRO that I purchased from scratch. It failes because the Windows 8 key embedded into the EFI doesn't match the new Windows 8 PRO that I have on DVD.
I chatted with Lenovo support, asking to purchase restore DVDs for my laptop - I was told that it's not possible (after going thorugh a couple of people and wasting 1.5 hours on chat_
Please provide some support as it is unacceptable that I cannot install clean version of WIndows 8 and the restore disks are not available from Lenovo.
Thank You.

Unfortunately, win 8 doesn't support dual boot in native or not tweaked mode.
Try this tool:
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?LegacyDocID=LENV-DIAGS#uefi
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Sound level options for voice analysis

I have two questions.
I am analysing voice signals using GRAAS microphone, NI9234, cDAQ 9178 & labview 2011. I am trying to produce a two dimensional graph of the signal with SPL (DB)(y-axis) versus frequency (x-axis). I noticed that the SVT sound level.vi from the sound & vibration toolkit outputs into 4 different values;
1. exponential averaging sound level (dB),
2. Leq sound level (dB),
3. running leq sound level (dB), and
4. peak sound level (dB).
Which of this four should I use.
Is it right that I should use linear weightage for human voice analysis?
Thanks in advance

If you've put the sound level to max & still not so comprehensible audio, it could be a hardware fault. A long shot, this haps to my friend check the small hole for the speaker if there is grit/dirt blocking it.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Since upgrading I no longer have any icons or the option for voice to text in my messager?

I Had help upgrading my phone now I no longer have the icons on my phone nor do I have the little microphone picture that allowed me to speak the message

I Had help upgrading my phone now I no longer have the icons on my phone nor do I have the little microphone picture that allowed me to speak the message

ITunes-LAME settings ideal for voice.

Using iTunes-LAME Encoder v2.0.9 (34) & LAME v3.97
I am having trouble with some past suggested encoding options for voice or audiobooks. Of the settings below, only -b 48 produced an encoding. I expected adding -m m to the end of that would get me a mono of the same but got a spinning ball instead. The others below all got stuck on "gathering info" with a spinning rainbow. I'm wondering if the latest lame has a change in the command line for encoding options?
I am looking to end up with a small file size for Audiobooks (ie 48 kbps), and yet resolve the voice "s" harsh digital sound.
Using Audio Hijack Pro off a CD player set to CBR - 48 kbps - mono, I got a good sounding file much better on the "s" than iTunes (built in import) set to the same settings. Thus I was trying to see if iTunes-LAME could do as did AHJPro.
Looking for speed as well. The -b 48 sounded ok on the "S" but lost some of the higher frequency thus a little muted sounding. Also important not to make this a long encoding process as there are many discs to do. I realize the list below has a few different bit rates and CBR VBR and ABR. Some I do not understand the setting as they did not appear on the usage guide.
Suggestion desired.
Anyone know a most current list of encoding settings (usage) that will work?
So far tried:
--preset 22 --noshort --scale 1.05 -q0 -mm --resample 16 --lowpass 7.0
-b 32 --resample 22050 --lowpass 8000
--alt-preset 64 -mm -b32
--abr 64 -mm -b32
-b 56 -m m
--preset voice
-b 48
Message was edited by: Harmz
Message was edited by: Harmz

Using a different iTunes library I was able to use the settings posted in my last message without a spinning ball. I think iTunes-LAME was just not finding the source. (I tried to edit the above for a 3rd time but forum wouldn't allow.)
Thus the problem is not in the settings, and I was able to compare the results.
Though I'm still interested in a good discussion of settings both for voice and music.
I cannot explain the settings of the first two listed above.
Message was edited by: Harmz

Allow client to access Support Options?

Is there a way to let my clients use the Ticket or Chat support options for their site? Sometimes the help they need should come directly from BC... If I am on vacation, e.g., how can they get immediate answers if something major goes wrong?
All they can see is the KB but not chat or tickets. They can see a closed case re: email problems....
But can't open a new one...

Hi Jefferis,
You can allow this from your partner portal under Partner settings. Please refer to the following screenshot :
Cheers!
Aish

Are there any other support options?

Does anyone know of a legitimate alternative human support option for Firefox, such as telephone, or chat, or direct one on one email, including paid/fee-based, options?
Thanks,
SK

iamjayakumars,
There are a number. This forum method is cumbersome (though very good, and people are very helpful), and often the elapsed time is too great for the nature or severity and/or urgency of the issues. Then, when you do get an answer, with - refer to such and such link or article, and try it, there are subsequent followups that can occur, again with the wait involved, and another layer of complexity to the problem. I would like at least have direct email with someone, or "someones, ".
For instance, see my question posted 03/3/13, 7:56 AM -
"I would like to change my mozilla support user name. Or, delete my account/login and create a new one. How do I do it? "
It is now 04/06/13, and not resolved, and this is a straightforward one, without complications.
I've got more complex ones that I would be better served with direct one on one communication. I would pay for it.
Also, see this question -
"How can I find/restore inadvertently deleted Bookmarks Folders, Bookmarks, and Bookmarks Toolbar Bookmarks?"
posted by stevek302 (that is also me), on 3/29/13 10:20 PM. I tried the profile method. but while installing, I chose a different folder/path then the x86 location, which is by design. At first it seemed to work, it was a clean install, without my 20 extensions, and 150 Bookmarks folders, and 100 Bookmarks Toolbar bookmarks. But now the new profile is no longer in Profile Manager. I ran the .exe setup file again, again chose a new folder, it appears to have installed in the new folder, but clicking it and opening it in the new folder, it opens with all the extensions, Bookmarks, etc., from the other Default profile. Now, it's 8 days later, and I still don't have it answered. I would willingly pay x amount a year for email, chat, or phone support, even from a third party company. But, Mozilla could use the funds.
There are more things constantly coming up. I am a long term user. I really like FF. It is so customizable. I am a layman, not an IT/computer guy, but hopefully towards the higher end of that scale, though self-taught. I want to keep using it, but as I learn more about it and do more with it, more things come up. Right now, using Google, the results page is behaving as though an auto-paging add-on is working. I want to be able to see the related searches at the bottom of the page, but I can't get to click any because the next page endlessly loads as I get down close to the bottom. I have no auto-page extension or plugin, neither enabled, nor disabled. I may have had one sometime, but not for a while. Yet in about:config, there are a bunch of auto-paging lines. Why are they there if its been removed? And the list goes on.
Thanks,
SK

Hi - I'm looking for a Print Preview Option for Firefox 12.0 for a Mac? I've found a link for a icon add-on, but it says its not support for my version.

What's the best way to get the Print Preview Option for Firefox 12.0?
Many thanks,

Hi, is this the add-on that does not supported from your os ?
https://addons.mozilla.org/eN-US/firefox/addon/printprint-preview/?src=search
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

On Plus support for Voice services

Hi Friends,
I am trying to explore use of onplus for Config, Monotoring and reporting for voice services (example UC50,ISR with CME/CUE cards as well as use of SRST).
Could you please sugget any documentation I can refere for this req.
Suresh

Hi Suresh,
The UC500 is a supported device. Please see this link for a feature summary of supported Cisco devices with OnPlus:
https://supportforums.cisco.com/docs/DOC-17501
Currently, we do not have any monitoring or reporting specific to voice services. The standard monitoring and reporting available for any device may be applied. In a future release, we may have additional voice features.
Thanks,
The OnPlus Team

Yesterday I purchased a new ipod classic to replace one that had worn out. The price was $179. I wonder if I am eligible for the extended warranty for $59. Can't seem to navigate through the apple support option to get answer. Anyone know?

yesterday I purchased a new ipod classic to replace one that had worn out. The price was $179. I wonder if I am eligible for the extended warranty for $59. Can't seem to navigate through the apple support option to get answer. Anyone know?

Put in the serial number but was not offered an extended apple care plan. I guess if you purchase a new one because your old one is out of warranty you get a deal for $179 but you don't get a chance for an extended warranty. You don't get a new box or earbuds, just a brand new iPod. Good deal but since my first died under warranty, got a new one for free, second one I smashed the screen and got a new one for (I don't remember) and now the hard drive went and I paid $179 for a new one, I was hoping to get an extended warranty. But I guess not...
Thank you!

My computer is a few years old and I understand the One to One membership is only for 1 year. Are there annoy other support options I can purchase?

My computer is a few years old and my suppost One to One membership is only for 1 year from purchace. Are there any other suppost memberships available for purchase?

Do you mean physical support for repairs, or just advice? The latter is available free of charge on these forums as well as in Apple Stores.
Apple Support Options:
http://support.apple.com/kb/HT2046?viewlocale=en_US

BE6K supported options for voice conferencing

Similar Messages

Maybe you are looking for