Bea.jolt.ServiceException: Invalid Session
Good day to all!
I know that this is common problem, but if you kindly point me in the right direction, that would be more appreciated. I am currently running PT8.50 HRMS 9.1 DMO on Windows 7. The PIA is giving this error:
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
When logging in, I get that the app server is down. I am in familiar with why I see app server is down. I also believe that I understand why I am getting the above error. During installation, I put my own password for PTWEBSERVER as oppose to the default. I thought I updated the password with the default, but doesn't seem to work.
I also understand to check the appserver logs, but I am not familiar where it is located, so if 'I could get the location of these logs, I will post the log and that would confirm if it is a password issue, or not.
And if I need to uninstall and reinstall PIA, please tell me what I should do there. Thank you and Be Blessed
Thank you for that helpful tip. I misunderstood Bob's post then. I though the updating was only if the acct was locked (which it wasn't because I checked). In any rate, I did rerun the script and the script was successful. Just to be sure, I logged into datamover via bootstrap mode and just typed in exactly the command that was given. I didn't miss anything I am assuming correct?
I am still getting the same error message, even after updating the password. Here is the log, maybe this will help. Be Blessed
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:443 for protocols iiops, t3s, ldaps, https.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:100:7f:fffe:80 for protocols iiop, t3, ldap, snmp, http.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:80 for protocols iiop, t3, ldap, snmp, http.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:1975:e9d2:ad58:81a3:80 for protocols iiop, t3, ldap, snmp, http.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.10.10.10:443 for protocols iiops, t3s, ldaps, https.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:741d:f596:ab4:94cd:443 for protocols iiops, t3s, ldaps, https.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:741d:f596:ab4:94cd:80 for protocols iiop, t3, ldap, snmp, http.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <Server> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:818a:caaf:319d:8d73:80 for protocols iiop, t3, ldap, snmp, http.>
####<Nov 17, 2010 12:55:52 PM CST> <Notice> <WebLogicServer> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152368> <BEA-000329> <Started WebLogic Admin Server "PIA" for domain "INNOVATI" running in Production Mode>
####<Nov 17, 2010 12:55:52 PM CST> <Warning> <Server> <Kelvin> <PIA> <DynamicSSLListenThread[DefaultSecure]> <<WLS Kernel>> <> <> <1290020152368> <BEA-002611> <Hostname "Kelvin", maps to multiple IP addresses: 10.10.10.10, fe80:0:0:0:ad0e:4847:e1ac:9d13%23>
####<Nov 17, 2010 12:55:52 PM CST> <Info> <EJB> <Kelvin> <PIA> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020152977> <BEA-010008> <EJB Deploying file: mejb.jar>
####<Nov 17, 2010 12:55:55 PM CST> <Notice> <WebLogicServer> <Kelvin> <PIA> <Main Thread> <<WLS Kernel>> <> <> <1290020155629> <BEA-000365> <Server state changed to RUNNING>
####<Nov 17, 2010 12:55:57 PM CST> <Notice> <WebLogicServer> <Kelvin> <PIA> <Main Thread> <<WLS Kernel>> <> <> <1290020157204> <BEA-000360> <Server started in RUNNING mode>
####<Nov 17, 2010 12:56:06 PM CST> <Info> <EJB> <Kelvin> <PIA> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290020166611> <BEA-010009> <EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.>
####<Nov 17, 2010 1:35:20 PM CST> <Info> <ServletContext-> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1290022520267> <BEA-000000> <ERROR: WebProfile loading internal default settings because of an Exception while communicating with "kelvin:9000">
####<Nov 17, 2010 1:35:33 PM CST> <Info> <ServletContext-> <Kelvin> <PIA> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1290022533121> <BEA-000000> <ERROR: WebProfile loading internal default settings because of an Exception while communicating with "kelvin:9000">
Edited by: 792295 on Nov 17, 2010 11:41 AM
Similar Messages
-
I am facing the same issue and in my configuration.properties file it says:
psserver=gaurav:9000
You said that you used server ip. Where I can get the server ip. Please revert as soon as possible.
Thanks in advance
GauravHi Nick,
I tried that already after going through this thread but no success. Still same error.
As shown below :
# For example: psserver=SERVER1:9000,SERVER2:9010,SERVER3:9020
## sd="Application Server Connect String", ld="This string embodies the failover and load balancing string for PIA to connect to Application Server domains. Consult the PeopleBooks recommendations on load balancing and failover for more information. The format is psserver=AppSrvr:JSLport where AppSrvr is your fully qualified domain name. Multiple domains should be comma separated", tip="Format: psserver=AppSrvr:JSLport where AppSrvr is your fully qualified domain name, e.g psserver=SERVER1.oracle.com:9000,SERVER2.oracle.com:9010"
psserver=192.168.0.1:9000
Please guide me further.
Gaurav. -
Exception in thread "main" bea.jolt.ServiceException: Service is not availa
Hi All,
I'm new to Tuxedo. I've installed tuxedo. I've deployed simpapp given as sample. It's c clients and server are working fine. Now I'm trying to use Java client for the same server. In my office I need to work with Tuxedo9.1 and JOLT. When I'm trying to run I'm getting problem. I'm not able to find any solution. Please help me. I'm giving entire work done by me as follows.
Problem in Running Java Client with Tuxedo.
My ASCII tuxconfig file details:
# (c) 2003 BEA Systems, Inc. All Rights Reserved.
#eident "@(#) samples/atmi/simpapp/ubbsimple $Revision: 1.5 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY 123456
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 50
MAXSERVERS 30
MAXSERVICES 50
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
APPDIR="/shashi/mysimpleapp/simpapp"
TUXCONFIG="/shashi/mysimpleapp/simpapp/tuxconfig"
TUXDIR="/newutitux/newtux/tuxedo9.1"
#Example:
# APPDIR="/home/me/simpapp"
# TUXCONFIG="/home/me/simpapp/tuxconfig"
# TUXDIR="/usr/tuxedo"
systest LMID=simple MAXWSCLIENTS=4
#Example:
#beatux LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE
JSLGROUP LMID=simple GRPNO=2 OPENINFO=NONE
JREPGROUP LMID=simple GRPNO=3 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGROUP SRVID=2
CLOPT=" -- -n //10.10.100.110:5000 -d /dev/tcp "
JREPSVR SRVGRP=JREPGROUP SRVID=4
CLOPT=" -- -W -P /shashi/mysimpleapp/simpapp/jrepository "
JRAD SRVGRP=JSLGROUP SRVID=3
CLOPT=" -- -l //10.10.100.110:5555 -c //10.10.100.110:5000 "
*SERVICES
TOUPPER
I've started the server using command tmboot -y.5 servers are started.
When I test using tmadmin command following is the output.
>psr
Prog Name Queue Name Grp Name ID RqDone Load Done Current Service
BBL 123456 simple 0 0 0 ( IDLE )
simpserv 00001.00001 GROUP1 1 0 0 ( IDLE )
JSL 00002.00002 JSLGROUP 2 0 0 ( IDLE )
JRAD 00002.00003 JSLGROUP 3 0 0 ( IDLE )
JREPSVR 00003.00004 JREPGRO+ 4 0 0 ( IDLE )
pscService Name Routine Name Prog Name Grp Name ID Machine # Done Status
TOUPPER TOUPPER simpserv GROUP1 1 simple 0 AVAIL
My Jrlyconfig file content is:-
LOGDIR=/shashi/mysimpleapp
ACCESS_LOG=access.log
ERROR_LOG=error.log
LISTEN=10.10.100.110:4444
CONNECT=10.10.100.110:5555
SOCKETTIMEOUT=30
and jrly is also running.
Content of jrepository file is:-
#!JOLT1.0^M
add SVC/TOUPPER:vs=1:ex=1:bt=STRING:\^M
bp:pn=STRING:pt=string:pf=167772161:pa=rw:ep:^M
add PKG/SIMPSERV:TOUPPER:^M
ULOG Message is:-
165446.systest!BBL.5691.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit, Patch Level (none)
165446.systest!BBL.5691.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!simpserv.5692.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!simpserv.5692.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!simpserv.5692.1.0: Welcome to the simple server
165446.systest!JSL.5693.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JSL.5693.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JSL.5693.1.0: INFO: JOLT Listener version-BEA Jolt 9.1
165446.systest!JSL.5693.1.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2664953090480>, Expiration Date : <None>"
165446.systest!JSL.5693.1.0: JOLT_CAT:1564: "INFO: Licensee : <Customer>"
165446.systest!JREPSVR.5694.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JREPSVR.5694.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JREPSVR.5694.1.0: Current version: BEA Jolt 9.1
165446.systest!JREPSVR.5694.1.0: Repository "/shashi/mysimpleapp/simpapp/jrepository" (2 records) is writable.
165446.systest!JRAD.5695.1.0: 06-10-2010: Tuxedo Version 9.1, 64-bit
165446.systest!JRAD.5695.1.0: LIBTUX_CAT:262: INFO: Standard main starting
165446.systest!JRAD.5695.1.0: INFO: JRAD version-BEA Jolt 9.1
I don't find any problem in starting and running the system.
Problem faced:-
1.Repository Editor is connected to the system using port number given for jrly( i.e.. 4444) but it is giving an exception
"bea.jolt.ServiceException:Service is not available:.GETKEYS"
2.When trying to load bulk loader after setting jolt.jar and joltadmin.jar to the classpath it is giving the exception
java bea.jolt.admin.jbld //10.10.100.110:4444 services.txt
Exception in thread "main" bea.jolt.ServiceException: Service is not available:.GETKEYS
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at bea.jolt.admin.JSvcPkgTbl.initTable(jbld.java:1010)
at bea.jolt.admin.JSvcPkgTbl.<init>(jbld.java:990)
at bea.jolt.admin.JBldDefRec.<init>(jbld.java:138)
at bea.jolt.admin.jbld.main(jbld.java:801)
Note:- I've tested on port number 5000 and file as jrepository also.The content of services.txt is as follows
service=TOUPPER
export=true
inbuf=STRING
outbuf=STRING
access=inout
3.While running the ToUpper.java given in sample it is giving the exception as follows.
"Exception in thread "main" bea.jolt.ServiceException: Service is not available:TOUPPER
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at ToUpper.main(ToUpper.java:36)"
Content of ToUpper.java:-
/* Copyright 1996 BEA Systems, Inc. All Rights Reserved */
import bea.jolt.*;
public class ToUpper
public static void main (String[] args)
JoltSession session;
JoltSessionAttributes sattr;
JoltRemoteService toupper;
JoltTransaction trans;
String userName=null;
String userPassword=null;
String appPassword=null;
String userRole="myapp";
String outstr;
sattr = new JoltSessionAttributes();
sattr.setString(sattr.APPADDRESS, "//10.10.100.110:4444");
switch (sattr.checkAuthenticationLevel())
case JoltSessionAttributes.NOAUTH:
break;
case JoltSessionAttributes.APPASSWORD:
appPassword = "appPassword";
break;
case JoltSessionAttributes.USRPASSWORD:
userName = "myname";
userPassword = "mysecret";
appPassword = "appPassword";
break;
sattr.setInt(sattr.IDLETIMEOUT, 300);
session = new JoltSession(sattr, null, null,
null, null);
toupper = new JoltRemoteService ("TOUPPER", session);
toupper.setString("STRING", "hello world");
toupper.call(null);
outstr = toupper.getStringDef("STRING", null);
if (outstr != null)
System.out.println(outstr);
session.endSession();
System.exit(0);
} // end main
} // end ToUpper
Please help me. Thanks in Advance. Waiting for ASAP help.
Regards
Shashi RanjanHi,
As per your suggestion I'm again giving the detail of all the files which I'm using.
tmboot -y output:-
Booting all admin and server processes in /home/oracle/simaapp/tuxconfig
INFO: Oracle Tuxedo, Version 11.1.1.1.0, 32-bit, Patch Level (none)
Booting admin processes ...
exec BBL -A :
process id=6116 ... Started.
Booting server processes ...
exec TMUSREVT -- -f /home/oracle/simaapp/tmusrevt.dat :
process id=6117 ... Started.
exec simpserv -A :
process id=6118 ... Started.
exec JSL -- -n //station1.example.com:7000 -d /dev/tcp :
process id=6119 ... Started.
exec JREPSVR -- -W -P /home/oracle/simaapp/jrepository :
process id=6120 ... Started.
exec JRAD -- -l //station1.example.com:5555 -c //station1.example.com:7000 :
process id=6121 ... Started.
6 processes started.
TMUSREVT.ENV content:-
FIELDTBLS=Usysflds; export FIELDTBLS
FLDTBLDIR=$TUXDIR/udataobj; export FLDTBLDIR
FIELDTBLS32=jrep.f32; export FIELDTBLS32;
FLDTBLDIR=$TUXDIR/udataobj; export FLDTBLDIR;
tux.env content:-
TUXDIR=/u01/tuxedo/tuxedo11gR1; export TUXDIR
JAVA_HOME=$TUXDIR/jre; export JAVA_HOME
JVMLIBS=$JAVA_HOME/lib/i386/server:$JAVA_HOME/jre/bin
PATH=$TUXDIR/bin:$JAVA_HOME/bin:$PATH; export PATH
COBCPY=:$TUXDIR/cobinclude; export COBCPY
COBOPT="-C ANS85 -C ALIGN=8 -C NOIBMCOMP -C TRUNC=ANSI -C OSEXT=cbl"; export COBOPT
SHLIB_PATH=$TUXDIR/lib:$JVMLIBS:$SHLIB_PATH; export SHLIB_PATH
LIBPATH=$TUXDIR/lib:$JVMLIBS:$LIBPATH; export LIBPATH
LD_LIBRARY_PATH=$TUXDIR/lib:$JVMLIBS:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
WEBJAVADIR=$TUXDIR/udataobj/webgui/java; export WEBJAVADIR
UBBCONFIG content:-
*RESOURCES
IPCKEY 78111
MASTER "station1"
UID 501
GID 501
PERM 0600
MAXACCESSERS 50
MAXACLGROUPS 16384
MAXGTT 100
DOMAINID "simpapp"
MAXGROUPS 100
MAXNETGROUPS 8
MAXMACHINES 256
MAXQUEUES 50
MAXDRT 0
MAXRFT 0
MAXRTDATA 4
MAXSPDATA 33924
MAXSERVERS 50
MAXSERVICES 100
MAXCONV 10
MODEL SHM
LDBAL Y
1,10 Top
CMTRET COMPLETE
MAXBUFTYPE 16
MAXBUFSTYPE 32
SCANUNIT 10
SANITYSCAN 12
DBBLWAIT 2
BBLQUERY 30
BLOCKTIME 6
NOTIFY DIPIN
SYSTEM_ACCESS FASTPATH
MAXINTERFACES 150
MAXOBJECTS 1000
SIGNATURE_AHEAD 3600
SIGNATURE_BEHIND 604800
USIGNAL SIGUSR2
*MACHINES
DEFAULT:
"station1.example.com" LMID="station1"
TUXCONFIG="/home/oracle/simaapp/tuxconfig"
TUXDIR="/u01/tuxedo/tuxedo11gR1"
APPDIR="/home/oracle/simaapp"
TLOGNAME="TLOG"
TLOGSIZE=100
CMPLIMIT="MAXLONG,MAXLONG"
NETLOAD=0
SPINCOUNT=0
MAXACLCACHE=100
MAXOBJECTS=1000
SICACHEENTRIESMAX="500"
MAXWSCLIENTS=4
*GROUPS
GROUP1
LMID=station1 GRPNO=1 OPENINFO=NONE
JSLGROUP LMID=station1 GRPNO=2 OPENINFO=NONE
JSRGROUP LMID=station1 GRPNO=3 OPENINFO=NONE
TMUGROUP LMID=station1 GRPNO=4 OPENINFO=NONE
TMUSREVTGROUP LMID=station1 GRPNO=5 OPENINFO=NONE
*NETGROUPS
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGROUP SRVID=2
CLOPT=" -- -n //station1.example.com:7000 -d /dev/tcp "
JREPSVR SRVGRP=JSRGROUP SRVID=3
CLOPT=" -- -W -P /home/oracle/simaapp/jrepository "
JRAD SRVGRP=JSLGROUP SRVID=4
CLOPT=" -- -l //station1.example.com:5555 -c //station1.example.com:7000 "
TMUSREVT SRVGRP=TMUSREVTGROUP SRVID=5 GRACE=3600
ENVFILE="/home/oracle/simaapp/TMUSREVT.ENV"
CLOPT=" -- -f /home/oracle/simaapp/tmusrevt.dat "
SEQUENCE=11
*MODULES
*JDBCCONNPOOLS
*SERVICES
TOUPPER
LOAD=50 PRIO=50
BUFTYPE="ALL"
TRANTIME=30
AUTOTRAN=N
AFFINITYSCOPE=SERVER
*INTERFACES
*ROUTING
jrepository content:-
#!JOLT1.0
add SVC/TOUPPER:vs=1:ex=1:bt=STRING:\
bp:pn=STRING:pt=string:pf=167772161:pa=rw:ep:
add PKG/SIMPSERV:TOUPPER:
After exception the content of ULOG:-
175351.station1.example.com!BBL.6116.3086526144.0: 06-13-2010: client high water (0), total client (0)
175351.station1.example.com!BBL.6116.3086526144.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit, Patch Level (none)
175351.station1.example.com!BBL.6116.3086526144.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!TMUSREVT.6117.3086412000.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!TMUSREVT.6117.3086412000.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!simpserv.6118.3086706368.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!simpserv.6118.3086706368.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!simpserv.6118.3086706368.0: Welcome to the simple server
175351.station1.example.com!JSL.6119.3086870208.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JSL.6119.3086870208.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JSL.6119.3086870208.0: INFO: JOLT Listener version-Oracle Jolt 11.1.1.1.0
175351.station1.example.com!JREPSVR.6120.3086403264.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JREPSVR.6120.3086403264.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JREPSVR.6120.3086403264.0: Current version: Oracle Jolt 11.1.1.1.0
175351.station1.example.com!JREPSVR.6120.3086403264.0: Repository "/home/oracle/simaapp/jrepository" (2 records) is writable.
175351.station1.example.com!JRAD.6121.3086603968.0: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
175351.station1.example.com!JRAD.6121.3086603968.0: LIBTUX_CAT:262: INFO: Standard main starting
175351.station1.example.com!JRAD.6121.3086603968.0: INFO: JRAD version-Oracle Jolt 11.1.1.1.0
180656.station1.example.com!JRAD.6121.3086603968.0: JRAD_CAT:1526: INFO: JRLY connection is UP
180656.station1.example.com!JSH.6187.3086858464.-2: 06-13-2010: Tuxedo Version 11.1.1.1.0, 32-bit
180656.station1.example.com!JSH.6187.3086858464.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
180656.station1.example.com!JSH.6187.3086858464.-2: INFO: JOLT Handler version-Oracle Jolt 11.1.1.1.0
180657.station1.example.com!JSH.6187.3086858464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'oracle'; client name 'admin'"
Content of stderr:-
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
tpcall .GETREC failed: TPENOENT - no entry found
services.txt content
service=TOUPPER
export=true
inbuf=STRING
outbuf=STRING
access=inout
The content of jrlyconfig file:-
LOGDIR=/home/oracle/simaapp
ACCESS_LOG=access_log
ERROR_LOG=errorlog
LISTEN=station1.example.com:4444
CONNECT=station1.example.com:5555
then I'm running jrly -f jrlyconfig
The exception occurs when I run the command. "java bea.jolt.admin.jbld //station1:4444 services.txt"
Exception in thread "main" bea.jolt.ServiceException: Service is not available:.GETKEYS
at bea.jolt.JoltRemoteService.init(JoltRemoteService.java:156)
at bea.jolt.JoltRemoteService.<init>(JoltRemoteService.java:112)
at bea.jolt.admin.JSvcPkgTbl.initTable(jbld.java:1010)
at bea.jolt.admin.JSvcPkgTbl.<init>(jbld.java:990)
at bea.jolt.admin.JBldDefRec.<init>(jbld.java:138)
at bea.jolt.admin.jbld.main(jbld.java:801)
similarly when I'm trying to connect through RE.html
the exception is
bea.jolt.ServiceException: Service is not available:.GETKEYS
The output of command JREPSVR -v is
# List of services and corresponding handler functions built into the server
:ADDREC
:DELREC
:FLUSHCACHE
:GARBAGECOLLECT
.GETALL:GETALL
.GETKEYS:GETKEYS
.GETREC:GETREC
.GETSVC:GETSVC
:LOCKREP
.NUMRECS:NUMRECS
Regards,
Shashi Ranjan -
Bea.jolt.ServiceException: TPENOENT - no entry found
Hi,
I am getting this error.Also find the ULOG contents pasted below.
D:\bea\tuxedo9.1\samples\jolt\ToUpper>java ToUpper
Authentication Level set To :0
Exception caught error no is:6
bea.jolt.ServiceException: TPENOENT - no entry found
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
at ToUpper.main(ToUpper.java:39)
I have checked the jrepository file and also the Applet window for the service defination(TOUPPER)but still its not recognizing the service.Is there some configuration thing I have missed out before running JOLT client.
ULOG File Contents
132947.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1197: INFO: Exiting system
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
132956.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1197: "INFO: Exiting system"
132956.GVC3ZA03TESTING!DMADM.5844.5348.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
132959.GVC3ZA03TESTING!BBL.3216.4372.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
133028.GVC3ZA03TESTING!BBL.6140.5124.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
133028.GVC3ZA03TESTING!BBL.6140.5124.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
133028.GVC3ZA03TESTING!JSL.5608.6088.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!JSL.5608.6088.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!JSL.5608.6088.0: INFO: JOLT Listener version-BEA Jolt 9.1
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: INFO: JOLT Handler version-BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Current version: BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
133029.GVC3ZA03TESTING!WSL.3292.4892.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSL.3292.4892.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!WSH.2568.3772.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.2568.3772.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133029.GVC3ZA03TESTING!WSH.5764.3836.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.5764.3836.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133242.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133359.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133456.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid32(ACCOUNT_ID) failed for INQUIRY: LIBFML_CAT:8: ERROR: Unknown field name. Maybe FIELDTBLS32 is not set properly.
133612.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
143325.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid(SAMOUNT) failed for DEPOSIT: LIBFML_CAT:11: ERROR: Cannot find or open field table. Maybe FIELDTBLS is not set properly.
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1197: INFO: Exiting system
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144116.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1197: "INFO: Exiting system"
144116.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144119.GVC3ZA03TESTING!BBL.6140.5124.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144148.GVC3ZA03TESTING!BBL.4144.4376.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144148.GVC3ZA03TESTING!BBL.4144.4376.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144148.GVC3ZA03TESTING!JSL.5072.2444.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSL.5072.2444.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JSL.5072.2444.0: INFO: JOLT Listener version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Current version: BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144148.GVC3ZA03TESTING!WSL.3040.5488.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSL.3040.5488.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!WSH.5740.2764.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.5740.2764.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144148.GVC3ZA03TESTING!WSH.1784.5448.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.1784.5448.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144157.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144207.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144226.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144229.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1197: INFO: Exiting system
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144518.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1197: "INFO: Exiting system"
144519.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144522.GVC3ZA03TESTING!BBL.4144.4376.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144543.GVC3ZA03TESTING!BBL.5440.4548.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144543.GVC3ZA03TESTING!BBL.5440.4548.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144543.GVC3ZA03TESTING!JSL.1796.5232.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSL.1796.5232.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JSL.1796.5232.0: INFO: JOLT Listener version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Current version: BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144543.GVC3ZA03TESTING!WSL.2596.4404.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSL.2596.4404.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!WSH.3508.5136.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.3508.5136.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144543.GVC3ZA03TESTING!WSH.4288.5676.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.4288.5676.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144548.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144634.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144734.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"Hi Ajay,
Please see my response to your other post.
Regards,
Todd Little
BEA Tuxedo Chief Architect -
Bea.jolt.ServiceException:- TPETRAN - error starting transaction
I configured the simpapp application (I have pasted the ubb config below)
And i got the following error at the jolt client end:
bea.jolt.ServiceException:- TPETRAN - error starting transaction
At tuxedo end, i'm getting this in the log
160304.blrgislin42!JSH.24963.2696928160.-2: gtrid x0 x499be280 x1: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 14"
How can I resolve this issue?
here is the ubbsimple file::
RESOURCES+
IPCKEY 123456*
DOMAINID simpapp*
MASTER simple*
MAXACCESSERS 10*
MAXSERVERS 10*
MAXSERVICES 15*
MODEL SHM*
LDBAL N*
MACHINES+
DEFAULT:*
TUXDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/"*
APPDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp"*
TUXCONFIG="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/tuxconfig"*
MAXWSCLIENTS=5*
+"XXXXXXX" LMID=simple+
GROUPS+
GROUP1*
LMID=simple GRPNO=1 OPENINFO=NONE*
JSLGRP*
LMID=simple GRPNO=2 OPENINFO=NONE*
SERVERS+
DEFAULT:*
CLOPT="-A"*
simpserv SRVGRP=GROUP1 SRVID=1*
JSL SRVGRP=JSLGRP SRVID=2 RESTART=Y MAXGEN=2 CLOPT="-A -- -n//xx.xx.xx.xx:3051"*
JREPSVR SRVGRP=JSLGRP SRVID=3 RESTART=Y MAXGEN=2 GRACE=0 CLOPT="-A -- -W -P /ais_local/share/ankumar/BEA/tuxedo8.1/udataobj/jolt/repository/jrepository"*
SERVICES+
DEFAULT: AUTOTRAN=Y TRANTIME=30*
TOUPPER*Hi,
Thank you Malcolm and Todd for your replies.
Please help me resolve the issue.
I removed the AUTOTRAN option and I still get the error
bea.jolt.ServiceException: TPETRAN - error starting transaction
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
@ tuxedo end, i get this error msg
!JSH.24293.2696928160.-2: gtrid x0 x499d214d x1: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 14"
Java client code:
JoltTransaction trans = null;
try {
trans = new JoltTransaction(0, jSessSync);
jServ.call(trans);
trans.commit();
catch(Exception e) {
trans.rollback();
log.logException("Caught exception in executeService(): ", e);
return(e.toString());
I also tried AUTOTRAn=Y option after configuring TLOG, but i still get the same error
TLOG
$ ./crtlog.sh -m
tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by BEA Systems, Inc.
Tuxedo is a registered trademark.
Echo now on.
crdl -b 500 -z /ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/TLOG
Device created: /ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/TLOG
crlog -m simple
crlog successfully completed.
q
crtlog.sh successful.
This is my current ubbsimple file::::::::::::::::::::::::
*RESOURCES
IPCKEY 123456
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 10
MAXSERVERS 10
MAXSERVICES 15
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
TUXDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/"
APPDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp"
TUXCONFIG="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/tuxconfig"
TLOGDEVICE="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/TLOG"
TLOGNAME="TLOG"
MAXWSCLIENTS=5
#Example:
# APPDIR="/home/me/simpapp"
# TUXCONFIG="/home/me/simpapp/tuxconfig"
# TUXDIR="/usr/tuxedo"
"blrgislin42" LMID=simple
#Example:
#beatux LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE
JSLGRP
LMID=simple GRPNO=2 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGRP SRVID=2 RESTART=Y MAXGEN=2 CLOPT="-A -- -n//10.11.23.66:3051"
JREPSVR SRVGRP=JSLGRP SRVID=3 RESTART=Y MAXGEN=2 GRACE=0 CLOPT="-A -- -W -P /ais_local/share/ankumar/BEA/tuxedo8.1/udataobj/jolt/repository/jrepository"
*SERVICES
TOUPPER
Am I missing anything? am i missing any parameter for JSL server?
I have another Tuxedo9.1 in which the bankapp was configured (by somebody years back) and i was able to run the withdrawal, inquiry services with the same client. not sure why its not working with TOUPPER service.
The simple C client (simpcl) works fine.
Please Advise.
I have whole lot of other doubts with subscribing to events. Will open a new thread for that.
Thanks,
Anish Kumar
Edited by: Bangalore_anish on Feb 19, 2009 2:23 AM
Edited by: Bangalore_anish on Feb 19, 2009 2:29 AM -
Got 'bea.jolt.ServiceException: Data conversion failed; check log file'
Got CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Data conversion failed; check log file
when started PIA and login screen appeared.What version of PeopleTools are you using? Have you looked at E-AS: Error "Cannot find or open field table. Maybe FIELDTBLS32 is not set properly" (Doc ID 660607.1) yet?
-
Bea.jolt.ServiceException: Data conversion failed
Having problem with this error on Linux 6.2, Tuxedo 7.1, and JOLT 1.2.1
connecting
to SCO 5 and Tuxedo 6.5. The error in the ULOG is JSH.30085.1024.-2:
Can't map Jolt field id 167772175 to name
I read previous posts on problems with 7.1 connecting to 6.5. We have a
successful domains connection.
But, I think the problem is on the JOLT/Linux side. We received /
applied a patch that was supposed to correct this problem to no avail.
Any ideas are appreciated.This problem could be due to a number of things :-
1- The definition for your service in the repository does not have all the fields
defined that the service can return.
2- The length of the fieldname is greater than 28 characters
I believe there is now a jolt patch to get over this problem
3- Your service is defined at OUTBUF=FML32 when it is not a 32bit service or visa
versa
4- The fields file pointed to by FIELDTBLDIR and FIELDTBLS does not contain the
correct values for the field
I hope this helps
Joe -
Bea.jolt.JoltRemoteService.decodeCALL()
I am trying to make a call to the TUX service via JOLT. The servers are running
in Sun Solaris E10K box. When I make a call to the function, call of JoltRemoteService
class , I am getting the following exception.
Can anyone help me to fix this issue?
Exception in thread "main" bea.jolt.ServiceException: bea.jolt.JoltRemoteService
(SFSODRP).decodeCALL()
bea.jolt.MessageException: bea.jolt.BufException: java.io.UTFDataFormatException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Exception.java:42)
at java.lang.RuntimeException.<init>(RuntimeException.java:47)
at bea.jolt.JoltException.<init>(JoltException.java:58)
at bea.jolt.ServiceException.<init>(ServiceException.java:37)
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:412)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:307)
at XXCallTux.callService(XXCallTux.java:42)
at XXDrpDTran.getData(XXDrpDTran.java:68)
at drpdeptest.main(drpdeptest.java:27)
thanks
ramHi Ajay,
Please see my response to your other post.
Regards,
Todd Little
BEA Tuxedo Chief Architect -
Bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
I am ctreating the transaction object and try to operate PoolManager.call()
with the transaction object as parameter. The call fails with the following
exception:
bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
at bea.jolt.pool.Connection.call(Connection.java, Compiled Code)
at bea.jolt.pool.SessionPool.call(SessionPool.java:412)
at bea.jolt.pool.SessionPool.call(SessionPool.java:211)
at
mcs.connectjolt.bandetails.BanDetailesDAO.getBanDetailes(BanDetailesDAO.java
:87)
at
mcs.connectjolt.bandetails.BanDetailsBean.getBanDetailes(BanDetailsBean.java
:68)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl.getBanDetailes(BanDetailsBea
nEOImpl.java:105)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl_WLSkel.invoke(BanDetailsBean
EOImpl_WLSkel.java:83)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java, Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:69)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
My configuration: WebLogic 5.1, Jolt 1.2, Tuxedo 6.4.I am ctreating the transaction object and try to operate PoolManager.call()
with the transaction object as parameter. The call fails with the following
exception:
bea.jolt.pool.ServiceException: TPETRAN - error starting transaction
at bea.jolt.pool.Connection.call(Connection.java, Compiled Code)
at bea.jolt.pool.SessionPool.call(SessionPool.java:412)
at bea.jolt.pool.SessionPool.call(SessionPool.java:211)
at
mcs.connectjolt.bandetails.BanDetailesDAO.getBanDetailes(BanDetailesDAO.java
:87)
at
mcs.connectjolt.bandetails.BanDetailsBean.getBanDetailes(BanDetailsBean.java
:68)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl.getBanDetailes(BanDetailsBea
nEOImpl.java:105)
at
mcs.connectjolt.bandetails.BanDetailsBeanEOImpl_WLSkel.invoke(BanDetailsBean
EOImpl_WLSkel.java:83)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAda
pter.java, Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandle
r.java:69)
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
5)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
My configuration: WebLogic 5.1, Jolt 1.2, Tuxedo 6.4. -
Calling Tuxedo Service using BEA Jolt.
I'm trying to call Tuxedo service from java stored procedure using BEA JOLT.My normal java client works fine but when i use the same client as java stored procedure i get following error message :
can not connect to any //lucy:9021(host:port)
Reason:Nwhdlr:can not open socket
I've successfully loaded all required JOLT jar files using loadjava and created the procedure successfully .Java code is given below :
import bea.jolt.*;
import java.sql.*;
public class JoltToTux
public static void callTuxService() throws Exception
JoltSession session;
JoltSessionAttributes sattr;
JoltRemoteService toupper;
JoltTransaction trans;
String userName=null;
String userPassword=null;
String appPassword=null;
String userRole=null;
String outstr;
try {
sattr = new JoltSessionAttributes();
sattr.setString(sattr.APPADDRESS, "//lucy:9021");
sattr.setInt(sattr.IDLETIMEOUT, 300);
session = new JoltSession(sattr, userName, userRole,userPassword, appPassword);
toupper = new JoltRemoteService ("CB_EXESUB", session);
toupper.setString("CLFY_SUB", "PingSrvr");
toupper.call(null);
System.out.println( "Call to Tuxedo complete" );
outstr = toupper.getStringDef("WF_MESSAGE","" );
System.out.println("return string : " + outstr);
session.endSession();
System.exit(0);
} //end of try
catch (Exception e) {
// System.err.println(e.getMessage());}
e.printStackTrace();
} // end main
public static void main( String args[] ) {
try {
JoltToTux jt = new JoltToTux();
jt.callTuxService();
catch ( Exception e0 ) {
e0.printStackTrace();
} // end ToUpper
thanks
anuragAms,
You can't do that with JOLT. You will need to use the WTC product,
currently in beta - see WTC Questions and Answers
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and
BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Ams wrote:
Hi Manoj,
I want to call a tuxedo service and also want to update
database (using entity beabs) in same transaction so I
can't use AUTOTRAN , Am I right ?
I am using bea.jolt.pool.SessionPool's startTransaction
method to start a transaction and passing this
to SessionPool's call method.
Ams.
"Manoj SASIDHARAN" <[email protected]> wrote:
Hello Ams,
Could u plz give more information abt the usage scenario. Another way
to test
would be to put AUTOTRAN=Y for the service in question.
HTH
regards
MS
"Ams" <[email protected]> wrote:
Hi,
I am calling Tuxedo service from ejb using jolt.
I want the service call in transaction started in ejb.
I am getting following error.
LIBTUX_CAT:481: ERROR: Service xa_start returned -7
Does jolt support transaction ?
Ams
[att1.html] -
ORA-00026: missing or invalid session ID
I am receiving following error, while executing a procedure kill_session
EXEC kill_session('USERNAME');
4329 267 TARIQ_CORE
ORA-00026: missing or invalid session ID
create or replace
procedure kill_session (usr_2_kill in varchar2)
as
vsid number(6);
vserial number(6);
begin
for s_info in (select * from v$session where username=usr_2_kill)
loop
vsid := s_info.sid;
vserial := s_info.serial#;
dbms_output.put_line(vsid||' '||vserial||' '||usr_2_kill);
execute immediate 'alter system kill session(:v1,:v2) immediate' using vsid,vserial;
end loop;
EXCEPTION
WHEN OTHERS
THEN
dbms_output.put_line(SQLERRM);
END;malhi wrote:
I am receiving following error, while executing a procedure kill_session
EXEC kill_session('USERNAME');
4329 267 TARIQ_CORE
ORA-00026: missing or invalid session ID
create or replace
procedure kill_session (usr_2_kill in varchar2)
as
vsid number(6);
vserial number(6);
begin
for s_info in (select * from v$session where username=usr_2_kill)
loop
vsid := s_info.sid;
vserial := s_info.serial#;
dbms_output.put_line(vsid||' '||vserial||' '||usr_2_kill);
execute immediate 'alter system kill session(:v1,:v2) immediate' using vsid,vserial;
end loop;
EXCEPTION
WHEN OTHERS
THEN
dbms_output.put_line(SQLERRM);
END;
Check your syntax ... it's wrong.
TUBBY_TUBBZ?alter system kill session (99,16840);
alter system kill session (99,16840)
ERROR at line 1:
ORA-00026: missing or invalid session ID
Elapsed: 00:00:00.89
TUBBY_TUBBZ?alter system kill session '99,16840';
System altered.
Elapsed: 00:00:00.57
TUBBY_TUBBZ? -
Error when connect to Smartview: Invalid Session ID
We are using 9.2.1 and receive this error on our DEV server when trying to connect to HFM database using Smartview. Nothing changed over the weekend and I don't know when the last person used Smartview on DEV.
When adding a new connection, can get to the window where the list of clusters are, then can pick a cluster and see the list of apps, but then once you click an app to see the database below it, get the Invalid Session ID message.
Thanks
JeffError seems to be driven by the fact that HFMWebserviceManager service is stopping every 5 seconds for some reason.
-
Bea.jolt.ApplicationException:TPESVCFAIL-application level service failure
Hi All,
When I try to open PIA 3 tier I'm getting following error on webpage: "bea.jolt.ApplicationException: TPESVCFAIL - application level service failure".
Thanks and Regards,
Vineel.This is a very generic error
See this doc for possible causes and resolutions.
E-AS: Master Note for "'bea.jolt.ApplicationException: TPESVCFAIL" Error [ID 1201223.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1201223.1 -
"is an invalid session name" error during publishing in workshop
Hello, I use OSB workshop and WebLogic server.
When I publishing my project I get error:
javax.management.RuntimeMBeanException.java.lang.IllegalArgumentException: is an invalid session nameI tried to reinstall domain but there is the same result.
Thank you for ahead for any suggestion.Have you checked Configuration Project -> Properties -> Oracle Service Bus Configuration -> Session name?
-
Invalid session : connecting from developer 6i to sql server 2000
Hi ,
I am facing the following problem for connecting to sql server
2000 from oracle forms 6i.
Oracle developer 6i(form builder 6.0.8.11.3)
sql server 2000
o/s windows 2000 server
plus80.exe <username>/<password>@odbc:<dsn_name>
SQL*Plus: Release 8.0.6.0.0 - Production on Tue Oct 24 17:36:56
2000
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
Connected to:
Oracle Open Client Adapter for ODBC 6.0.5.29.0
Microsoft SQL Server 08.00.0194
SQL>
pls help
Thanks in advance
YogeshHello ,
this forum must have a attachment option , so it very easy for others to update their development
Now how can i paste the procedure it have 6 - 8 pages and when i paste it, the words merge or join with others word, it become very difficult to read,,
anyhow
mail me i send the document
[email protected]
Maybe you are looking for
-
Hi Does anyone know if u am able to user oracle forms fromt eh development suite to connect to a oracle express xe edition? or do i need to download the full version of the DB.
-
Can you add batch video transition in adobe premiere cs5.5?
can you add batch video transition in adobe premiere cs5.5? i want to make a slide show with my pictures and i dont want to add fade in/out 400 times so is there any batch transition or one click fade in/out or at least something like that?
-
How to launch a word document through VC
Hi All, I have requirement which is as follows: I need to provide help for the screens of my application for which there are separate word documents which describes the process of using the application. There are about 6 help documents (MS word). I n
-
Mac OS X Problem ! Urgent !
I had recently purchased a Mac Os X today, and immediately installed the Mac OS X Leopard after the set up. Now, whenever I start up my computer and log in, it goes in, screen turns blue, and goes back to the log in/start up page today. any solutions
-
IDELAYCTRL REFCLK pin should be connected.
I have a Virtex-7 design that uses IDELAYE2 and ODELAYE2 primitives. I have instantiated a single IDELAYCTRL primitive in my code which is supposed to service all IDELAYE2 and ODELAYE2 primitives in my design. IDELAYCTRL receives 200 MHz clock genera