BEA WebLogic 6.0 with Compaq Open VMS

Hi folks,
could anybody tell me when the certification of this platform will be
done......
Cheers,
Peter

Judas wrote:
>
I downloaded the Weblogic Application server 6.0 installable with
Service pack 1 but was not able to install it. It gives some wierd error.
also the downloaded installable is 4.6 MB. Any remedies to this?You'll need to do another download - you do not
have a complete SP. The complete filesize is 38997Kb.
regards,
Per Jessen

Similar Messages

Crystal Reports in Java with BEA Weblogic (test drive)

Hello, 
 
The question is: What is wrong with Crystal Reports or BEA Weblogic, when they are working together? And how can it be repaired? 
 
I have a project working with reports. Tried to implement it for crystal reports and found an interesting problem. Crystal Reports didn't work with BEA Weblogic as well as with other servers. 1-2 years ago we just took Tomcat and worked with it. Right now we are interested in working with BEA. 
 
Everything works, but much slower than other servers. The best explanation is just a my tries in the end of the post. I hope some clever man helps me to option Weblogic or at least explains what is wrong. 
 
Test results are: 
 
- Apache Software Foundation - Tomcat 6.0: 
~3 sec for clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); 
~1 sec for crystalReportPageViewer.processHttpRequest(request, response, application, null); 
 
- OC4J - Oracle Containers for J2EE 10g (10.1.3.3.0): 
~4 sec for clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); 
~1 sec for crystalReportPageViewer.processHttpRequest(request, response, application, null); 
 
- Jetty 7.0.0.pre5: 
~2 sec for clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); 
~0 sec for crystalReportPageViewer.processHttpRequest(request, response, application, null); 
 
- BEA Weblogic 9.2: 
~30 sec for clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); 
~8 sec for crystalReportPageViewer.processHttpRequest(request, response, application, null); 
 
simple_cr_webapp.war (30 MB) can be downloaded [here|http://rapidshare.com/files/221096566/simple_cr_webapp.war.html] or [here|http://math.ut.ee/~a30858/simple_cr_webapp.war]: 
crystalreportviewers //all viewers for 2.0
WEB-INF
classes
CRConfig.xml //see WAR - without key, only sets timeout and report location
lib //all libraries for Eclipse plugin's web-app + j2ee.jar
web.xml //see WAR - generated by Eclipse plugin
sample.jsp //see WAR - generated by Eclipse plugin
sample.rpt //"Consolidated Balance Sheet.rpt" from Eclipse plugin's web-app samples
 
P.S. It is also suites if someone gives a simple project with CR, that works well. I really need to get solution for this problem, so any advises are expected. 

I also tried for different java vendors on BEA Weblogic 9.2.
Results for Jrockit are above: 30 sec and 8 sec
Results for Sun are worse than JRockit: 50 sec and 10 sec
JRockit:
java version "1.5.0_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_04-b05)
BEA JRockit(R) (build R26.0.0-189_CR269406-59389-1.5.0_04-20060322-1120-win-ia32, )
JAVA Memory arguments: -Xms500m -Xmx1000m
Sun:
java version "1.5.0_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_04-b05)
Java HotSpot(TM) Client VM (build 1.5.0_04-b05, mixed mode)
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=256m

Will BEA release an IDE with WebLogic Server 10 in march?

Hi
Thank you for reading my post.
Can some one tell me whether bea release an IDE with its new version of Weblogic server 10 in March?
Thanks

Have you seen the Web Services tutorial:
http://e-docs.bea.com/workshop/docs92/ws_platform/introduction/conWorkshopTutorials.html
What specific features would you like to see, relative to EE5. We're
working on support for EE5 annotations, but what are you most interested?
br
legolas wood wrote:
can you please give me some links to workshop feature matrix ?
specially i am looking at what does it provide to ease web service development based on jee 5 standards and what does it provide in term of soa development.
thanks

Cannot run BEA WebLogic 8.1 SP 3 with JDK 1.6

Hi,
Im using BEA Weblogic 8.1 SP3 trying to run a sample where a Robot from Kapow Mashup Server is called from a WebService hosted in the server.
The thing is that I keep getting a EJB Exception: : java.lang.NoClassDefFoundError: java/lang/StringBuilder (I attach the full exception below). I realised that by default the server uses the JDK which comes with the software (version 1.4) and that the class java.lang.StringBuilder is only available from JDK 1.5 onwards.
I have JDK 1.6 in my system, so in WebLogic -> Tools -> Application Properties -> JDK Home, I set that folder but still same exception occurs.
Through the Configuration Wizard I create a new “Basic WebLogic Server Domain” and in the step to configure the Java SDK I set the JDK 1.6 folder. However, when I try to start that server I get this error.
JAVA Memory arguments: -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\bea\WEBLOG~1\server\lib\weblogic_knex_patch.jar;C:\bea\WEBLOG~1\common\lib\log4j.jar;C:\bea\WEBLOG~1\server\lib\debugging.jar;C:\bea\WEBLOG~1\server\lib\knex.jar;C:\bea\WEBLOG~1\javelin\lib\javelin.jar;C:\bea\WEBLOG~1\server\lib\wlw-lang.jar;C:\ARCHIV~1\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WEBLOG~1\server\lib\weblogic_sp.jar;C:\bea\WEBLOG~1\server\lib\weblogic.jar;C:\bea\WEBLOG~1\server\lib\ant\ant.jar;C:\ARCHIV~1\Java\JDK16~1.0_1\jre\lib\rt.jar;;C:\bea\WEBLOG~1\common\eval\pointbase\lib\pbserver44.jar;C:\bea\WEBLOG~1\common\eval\pointbase\lib\pbclient44.jar;C:\bea\WEBLOG~1\server\lib\webserviceclient.jar;C:\bea\WEBLOG~1\server\lib\webserviceclient+ssl.jar;C:\bea\WEBLOG~1\server\lib\xbean.jar;C:\bea\WEBLOG~1\server\lib\wlxbean.jar;C:\bea\WEBLOG~1\server\lib\xqrl.jar;C:\bea\WEBLOG~1\server\lib\netui\netui-compiler.jar;C:\bea\WEBLOG~1\server\lib\wli.jar;C:\bea\WEBLOG~1\server\lib\fop.jar;C:\bea\WEBLOG~1\integration\adapters\sample\lib\sample-eis.jar;
PATH=C:\bea\WEBLOG~1\server\bin;C:\ARCHIV~1\Java\JDK16~1.0_1\jre\bin;C:\ARCHIV~1\Java\JDK16~1.0_1\bin;C:\Archivos de programa\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\HPQ\IAM\bin;C:\Archivos de programa\Java\jdk1.6.0_10\bin;C:\eclipseJava\plugins\org.apache.ant_1.7.0.v200803061910\bin;C:\Archivos de programa\Archivos comunes\Adobe\AGL;c:\Archivos de programa\Microsoft SQL Server\90\Tools\binn\;c:\matlab6p5\bin\win32;C:\Nokia\Update_Manager\bin;C:\Archivos de programa\QuickTime\QTSystem\;C:\Sun\jwsdp-2.0\jwsdp-shared\bin;C:\Archivos de programa\Kapow Mashup Server 6.3\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\HPQ\IAM\bin;C:\Archivos de programa\Java\jdk1.6.0_10\bin;C:\eclipseJava\plugins\org.apache.ant_1.7.0.v200803061910\bin;C:\bea\WEBLOG~1\server\bin\oci920_8
* To start WebLogic Server, use a username and *
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
Starting WLS with line:
C:\ARCHIV~1\Java\JDK16~1.0_1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -Dplatform.home=C:\bea\WEBLOG~1 -Dwls.home=C:\bea\WEBLOG~1\server -Dwli.home=C:\bea\WEBLOG~1\integration -Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.Name=myserver -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Listening for transport dt_socket at address: 8453
<27-abr-2009 11H22' CEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 11.0-b15 from Sun Microsystems Inc.>
<27-abr-2009 11H22' CEST> <Info> <Configuration Management> <BEA-150016> <This server is being started as the administration server.>
<27-abr-2009 11H22' CEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic XMLX Module 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic Integration 8.1 SP3 Wed Jun 30 14:05:38 PDT 2004 405464>
Stopping the Weblogic Workshop debugger...
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
If I modify the settings of this new domain an pick a BEA Supplied SDKs, everything works just fine.
Someone can give a hand on that? It seems like Bea WebLogic 8.1 and JDK 1.6 are not compatible. Completely stacked here.
Regards.
Full Exception
EJB Exception: : java.lang.NoClassDefFoundError: java/lang/StringBuilder
at robosuite.wizard.jws5a1dbbea00000001.ApiKapowIN.toString(ApiKapowIN.java:141)
at java.lang.String.valueOf(String.java:2131)
at java.lang.StringBuffer.append(StringBuffer.java:370)
at com.bea.wlw.runtime.core.context.WlwThreadContext.logInvoke(WlwThreadContext.java:363)
at com.bea.wlw.runtime.core.context.WlwThreadContext.startInvocation(WlwThreadContext.java:608)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:414)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:396)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:248)
at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(BaseContainerBean.java:198)
at com.bea.wlw.runtime.core.bean.SLSBContainerBean.invoke(SLSBContainerBean.java:103)
at com.bea.wlwgen.StatelessContainer_ly05hg_ELOImpl.invoke(StatelessContainer_ly05hg_ELOImpl.java:153)
at com.bea.wlwgen.GenericStatelessSLSBContAdpt.invokeOnBean(GenericStatelessSLSBContAdpt.java:62)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.runAsInvoke(BaseDispatcherBean.java:153)
at com.bea.wlw.runtime.core.bean.BaseDispatcherBean.invoke(BaseDispatcherBean.java:54)
at com.bea.wlw.runtime.core.bean.SyncDispatcherBean.invoke(SyncDispatcherBean.java:160)
at com.bea.wlw.runtime.core.bean.SyncDispatcher_k1mrl8_EOImpl.invoke(SyncDispatcher_k1mrl8_EOImpl.java:100)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.remoteDispatch(Dispatcher.java:161)
at com.bea.wlw.runtime.core.dispatcher.Dispatcher.dispatch(Dispatcher.java:49)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executePostRequest(HttpServerHelper.java:713)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doPost(HttpServer.java:49)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6456)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Even if it is a very naive question but I just cannot get it worked, what do you mean by using jdk 1.5 on client side?
I guess client side is completely out of WLS so the jdk to be used on the client side is not set in the environment.
However, the Exception Im getting is on the server side, when it tries to run the code automatically generated from Kapow Mashup Server 6.3. That code is embedded in a jar file, but it seems it makes a call to the java.lang.StringBuilder class which as said before, it is only available from jdk 1.5 onwards.
Should I contact Kapow Mashup Server support to see how the sample code is generated or I am missing something?
Regards.

BEA WebLogic Commerce Server 3.5 with MS SQL Server 2000 as DB

Ooops !
Sorry but in my last mail I forgot to attach the file with the
stdout log with the described example portal errors. Here is
the message and the file.
Davide Pozzi
Hi to all.
I have a problem using BEA WebLogic Server 3.5 (with service
pack 1) with SQL Server 2000 as the database. I followed the
instructions for SQL Server 7 included in the file readme.txt > in WLCS_35_DDLand the (thin) Web documentation on the
subject. The I tried to run the example portal and the
templates examples. All is working well apart from the fact
that some data seem not to be taken from the database. For
example the example portal lacks the news titles in the "News > Index" portletand the ads in the "AcmePromotion" portlet. In > the templates examples some logo
are missing (the E-Business
Control Center loads, but no campains or discounts, etc. are
loaded). When I start the example portal, a lot of exceptions > arise. In theattached text file the stdout log of Commerce
Server is reported.
Can anyone tell me a hint to solve these problems ? There are > known problemssetting up SQL Server 2000 with Commerce Server > 3.5 ? I've seen that Commerce
Server 3.5 is not yet certified > for SQL Server 2000, is BEA going to certificate
it ?
>
Thank you in advance for any help.
Davide Pozzi[errors.txt]

Ooops !
Sorry but in my last mail I forgot to attach the file with the
stdout log with the described example portal errors. Here is
the message and the file.
Davide Pozzi
Hi to all.
I have a problem using BEA WebLogic Server 3.5 (with service
pack 1) with SQL Server 2000 as the database. I followed the
instructions for SQL Server 7 included in the file readme.txt > in WLCS_35_DDLand the (thin) Web documentation on the
subject. The I tried to run the example portal and the
templates examples. All is working well apart from the fact
that some data seem not to be taken from the database. For
example the example portal lacks the news titles in the "News > Index" portletand the ads in the "AcmePromotion" portlet. In > the templates examples some logo
are missing (the E-Business
Control Center loads, but no campains or discounts, etc. are
loaded). When I start the example portal, a lot of exceptions > arise. In theattached text file the stdout log of Commerce
Server is reported.
Can anyone tell me a hint to solve these problems ? There are > known problemssetting up SQL Server 2000 with Commerce Server > 3.5 ? I've seen that Commerce
Server 3.5 is not yet certified > for SQL Server 2000, is BEA going to certificate
it ?
>
Thank you in advance for any help.
Davide Pozzi[errors.txt]

How to install Oracle BPEL Process Manager with the BEA WebLogic

Hi ,
I will install Oracle BPEL Process Manager with BEA WebLogic 9.2(MP2). I have download orabpel_10133_WebLogic.zip ,then Modify the following mandatory installation properties in the orabpel_10133_WebLogic\bpelDomain.properties file:
# BEA_HOME is the path where Weblogic is Installed
BEA_HOME=/opt/bea
# JAVA_HOME is the path of jdk folder inside your weblogic
JAVA_HOME=/opt/bea/jrockit90_150_10
# DOMAIN_HOME is the path where you wish to create your domain called BPELDomain
DOMAIN_HOME=/opt/bea/user_projects/domains
# APPS_HOME is the path where you wish to copy your applications and adapters that are required for oracleBPELServer
APPS_HOME=/opt/bea/user_projects/apps
# BEA_HOME is the path where BPEL PM is Installed
BPEL_HOME=/home/oracle/bpel/product/10.1.3.1/OraBPEL_1/bpel
# DRIVER_TYPE is the datasource class that installable use to create a datasources for oracleBPELServer
DRIVER_TYPE=oracle.jdbc.xa.client.OracleXADataSource
# DB_URL is the url to connect to orabpel schema
DB_URL=jdbc:oracle:thin:@16.157.134.17:1521:orcl
# DB_USER is the user Id for orabpel shema in database
DB_USER=ORABPEL
#DB_PASSWORD is the password for orabpel schema in database
DB_PASSWORD=bpel
#BPEL_SERVER_NAME is the server i.e. to be created under BPELDomain
BPEL_SERVER_NAME=oracleBPELServer
#PROXY_HOST is the Host name of the proxy server
PROXY_HOST=www-proxy.us.oracle.com
#PROXY_HOST=
#PROXY_PORT is the Port where the proxy server is running
PROXY_PORT=80
#PROXY_PORT=
#NON_PROXY_HOST is the list of non proxy hosts that are divided by a | symbol
#NON_PROXY_HOST=*.oracle.com|*.oraclecorp.com|localhost|127.0.0.1|stbbn10|stbbn10.us.oracle.com
NON_PROXY_HOST=*.oracle.com|*.oraclecorp.com|localhost|127.0.0.1|stbbn10|stbbn10.us.oracle.com|16.157.134.135
When I run the setup.sh , it will report
BUILD FAILED
/opt/software/WL_Installables/build.xml:131: Traceback (innermost last):
File "./wl_scripts/bpelDomain.py", line 22, in ?
File "./wl_scripts/createGroupsAndUsers.py", line 4, in ?
weblogic.management.utils.AlreadyExistsException: [Security:090267]Group BpelGroup
Actully ,there is no BpelGroup in Weblogic. Does anybody know how to solve it ?

MAke sure you have not set ANY environment variable related to Oracle / BEA / Java / LD_library path. Use the following script to unset / set the initial settings:
#!/bin/sh
unset ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM
unset LD_LIBRARY_PATH LD_LIBRARY_PATH_64
unset CLASSPATH JAVA_HOME
export PATH=.:/usr/sbin:/usr/bin:/usr/local/bin:/opt/VRTS/bin
export BEA_HOME=/appl/oracle/products/9.2/weblogic
Marc
http://orasoa.blogspot.com

Should we use JDeveloperor VAJ with BEA Weblogic?

I work in an organisation that extensively uses Oracle, and we have brought in an Ecomerce solution that uses EJBs/JSPs on BEA Weblogic with an Oracle back-end.
We have used JDeveloper for stand-alone Java development previously and already have licences for this IDE.
The suppliers of our Ecomerce system use Visual Age of Java. They say that they are not familiar with JDeveloper, though they believe that the integration with weblogic is inferior to that in VAJ. They recommend that we switch from Jdeveloper to VAJ.
Obviously this would be expensive in terms of licensing and learning another IDE. Has anyone used Oracle JDEveloper and weblogic? If so, what is the deployment of EJBs to weblogic like, and is remote debugging available? We are very happy with Jdeveloper for developing stand-alone Java and Oracle Java stored procedures, so if the weblogic integration is at least reasonable we would like to stick with it.

Chris,
Unfortunately, you cannot deploy directly using JDeveloper to Weblogic.
The only solution is to develop your EJB's using JDeveloper. Then use the EJB Deployer Tool that comes with Weblogic to generate the stubs and package and deploy the EJB.
Best of luck,
Rich

Is the 11.1.1.2 software compatible with BEA WebLogic 10.3?

Hi,
Does anyone know, is Oracle EPM version 11.1.1.2 compatible with BEA WebLogic 10.3? I know the recommended version is 9.2 MP3 for Windows 32 bit.
Do we need to get seperate license for WebLogic or is it included in this EPM software bundle?
Thanks for your answers in advance..!

Not sure about the licensing, its best to ask someone at Oracle, but I believe when you when automatic deploy 11.1.1.2 apps to Oracle10gR3 Application Server, it is actually referring to the Oracle Weblogic 10.3 Application Server, not the old Oracle (OAS) 10G Application Server, so it should work. You can also deploy to Weblogic 9.2 and IBM Webshpere automatically. I believe all other application servers may still be compatible but require a manual deployment.
Regards,
Imran

IP address restrictions not working with bea weblogic plugin

We want to implement IP address restrictions via the Sun Java One Web Server admin tool for our application. We are using the Sun Java One Web Server to proxy requests via the Bea Weblogic plugin. However, we cannot get IP address restrictions to work because of the leading asterisk in the following NSAPI entry for PPATH of obj.conf :
<Object name="weblogic" ppath="*/cmcsr/*"> Service fn="wl_proxy" WebLogicCluster="10.156.20.11:9010,\
10.156.20.12:9010,10.156.20.13:9010" DynamicServerList="OFF"
</Object>
Has anyone gotten IP restrictions to work with the bea Weblogic NSAPI plugin?

I'm not sure what you're asking, but each Service directive should be on its own line. It is an error to have both a <Client> tag and Service directive on a single line.

Integrating WebSphere MQ 5.3 with BEA Weblogic Server 9.2 3M

I am trying to integrate WebSphere MQ 5.3 with BEA WebLogic Server 9.2 3M. I have found the guide:
Integrating WebSphere MQ 6 with BEA Weblogic Server 10 using Weblogic Server's Foreign (JMS) Server feature [http://ibswings.blogspot.com/]. I have done all steps according this guidance.
I have made modification since, WebLogic Server 9.2 3M does not support EJB 3.0, I am using EJB 2.1, any changes that have been made is create ejb-jar.xml file and configure it according next guide
At the final step when I am deploying service-jar-files (for ex. ejb.jar), I am able to complete this procedure.
When I am starting service (for ex. ejb.jar) from Deployments I am facing a wall: exception appears
weblogic.application.ModuleException: Exception starting module: EJBModule(EJB)
Unable to deploy EJB: EJB.jar from EJB.jar:
com/ibm/mq/jmqi/system/JmqiComponent
at weblogic.ejb.container.deployer.EJBModule.start(EJBModule.java:505)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:18
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.NoClassDefFoundError: com/ibm/mq/jmqi/system/JmqiComponent
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at com.ibm.msg.client.wmq.factories.WMQFactoryFactory.createProviderXAConnectionFactory(WMQFactoryFactory.java:388)
at com.ibm.msg.client.jms.admin.JmsConnectionFactoryImpl.setProviderFactory(JmsConnectionFactoryImpl.java:170)
at com.ibm.mq.jms.MQConnectionFactory.<init>(MQConnectionFactory.java:240)
at com.ibm.mq.jms.MQQueueConnectionFactory.<init>(MQQueueConnectionFactory.java:76)
at com.ibm.mq.jms.MQXAQueueConnectionFactory.<init>(MQXAQueueConnectionFactory.java:69)
at com.ibm.mq.jms.MQXAQueueConnectionFactoryFactory.getObjectInstance(MQXAQueueConnectionFactoryFactory.java:77)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
As you can see weblogic complains about com.ibm.mq.jmqi.system.JmqiComponent, I googled JmqiComponent but dose not exists which is strange :P. Has anybody what is a reason for such a behaviour.

Hello.
I would ditch the foreign JMS approach. There is a detailed example of how to use the resource adapter for the same goal here:
WebSphere MQ resource adapter and Weblogic - how?
While Oracle supports foreign JMS, IBM won't. The only pattern that both IBM and Oracle support is resource adapter.
Let me know, if you need more guidance.
-Adrian

Inqmy resource adapter for SAP with Bea Weblogic Server

 Hi everybody,
 Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
 It works well with INQMY server, but with BEA I'm getting a lot of problems creating
 the connections.
 Thanks in advance.
 Xavi.


All,
 Here are the steps we (used for internal testing) had to perform to get
 IN-Q-MY adapter for SAP to work with WebLogic:
 The wli.adapter.inqmy.sapr3.spi package contains extensions to the
 In-Q-My J2EE Connector Architecture classes to overcome some limitations
 in the base implementation classes. To get around these issues, we had
 to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
 R3ConnectionFactory classes.
 * The javax.resource.spi.ManagedConnectionFactory implementation
 does not over-ride the equals and hashCode methods correctly. This
 causes problems with WLS 6.1.
 * There is a bug in their javax.resource.spi.ConnectionManager
 implementation for non-managed uses of the adapter. Consequently, their
 adapter cannot be used in a non-managed scenario.
 * The javax.resource.cci.ConnectionFactory class does not support
 the getConnection() method that does not take any arguments (it throws a
 null pointer exception).
 I am attaching the classes discussed above.
 Cheers,
 Chris
 Torsten Friebe wrote:
 > Hi,
 >
 > does anybody know where to get a trail version - if one exists - of IN-Q-MY
 > application server or the resource adapter?
 >
 > Thanks, regards
 > Torsten
 >
 > "Xavi" <[email protected]> schrieb im Newsbeitrag
 > news:[email protected]...
 >
 >>Hi everybody,
 >>
 >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
 >>
 > server
 >
 >>?
 >>
 >>It works well with INQMY server, but with BEA I'm getting a lot of
 >>
 > problems creating
 >
 >>the connections.
 >>
 >>Thanks in advance.
 >>Xavi.
 >>
 >>
 >
 >
 package wli.adapter.inqmy.sapr3.spi;
 import java.io.Serializable;
 import javax.resource.ResourceException;
 import javax.resource.cci.Connection;
 import javax.resource.cci.ConnectionSpec;
 import javax.resource.spi.ConnectionManager;
 import javax.resource.spi.ConnectionRequestInfo;
 import javax.resource.spi.ManagedConnection;
 import javax.resource.spi.ManagedConnectionFactory;
 import com.inqmy.r3adapter.R3ConnectionSpec;
 import com.inqmy.r3adapter.R3ManagedConnectionFactory;
 * Extends the In-Q-My implementation to allow for getConnection() with no
 * connection spec, i.e. use the default configured connection parameters.
 public class R3ConnectionFactory
 extends com.inqmy.r3adapter.R3ConnectionFactory
 implements com.bea.connector.IProxyMarker {
 private R3ConnectionSpec m_cspec;
 public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
 throws ResourceException {
 super(cm, mcf);
 String strClientNumber = mcf.getClientNumber();
 if (strClientNumber == null) {
 throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
 String strLanguage = mcf.getLanguage();
 if (strLanguage == null) {
 throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
 String strUserName = mcf.getUserName();
 if (strUserName == null) {
 throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
 String strPassword = mcf.getPassword();
 if (strPassword == null) {
 throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
 m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
 public Connection getConnection(ConnectionSpec connectionSpec)
 throws ResourceException {
 if (connectionSpec == null) connectionSpec = m_cspec;
 return super.getConnection(connectionSpec);
 package wli.adapter.inqmy.sapr3.spi;
 import java.io.Serializable;
 import javax.resource.ResourceException;
 import javax.resource.spi.ConnectionManager;
 import javax.resource.spi.ConnectionRequestInfo;
 import javax.resource.spi.ManagedConnection;
 import javax.resource.spi.ManagedConnectionFactory;
 * Extends the In-Q-My implementation to over-ride the
 * allocateConnection method to return a CCI connection vs. a ManagedConnection
 public class R3DefaultConnectionManager
 implements ConnectionManager, Serializable {
 public R3DefaultConnectionManager() {}
 public Object
 allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
 throws ResourceException {
 ManagedConnection mc = mcf.createManagedConnection(null, cri);
 return mc.getConnection(null, cri);
 package wli.adapter.inqmy.sapr3.spi;
 import javax.resource.spi.ConnectionManager;
 import javax.resource.spi.ConnectionRequestInfo;
 import javax.resource.spi.ManagedConnection;
 import javax.security.auth.Subject;
 * Extends the In-Q-My implementation to get around some problems encountered
 * while running on WebLogic:
 * <ul>
 * <li>Must over-ride default implementation of equals and hashCode method</li>
 * <li>Needed to provide my version of the CCI ConnectionFactory</li>
 * <li>Needed to provide my version of the default ConnectionManager for the
 * non-managed scenario use case</li>
 * </ul>
 public class R3ManagedConnectionFactory
 extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
 private int m_iHashCode;
 transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
 public R3ManagedConnectionFactory() {
 super();
 java.rmi.server.UID uid = new java.rmi.server.UID();
 m_iHashCode = uid.hashCode();
 public Object createConnectionFactory() {
 // need to install our own default connection manager because In-Q-My
 // version causes a ClassCastException in CCI ConnectionFactory
 // getConnection
 return createConnectionFactory(new R3DefaultConnectionManager());
 public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
 throws javax.resource.ResourceException {
 // need to check for null on the ConnectionRequestInfo object because the
 // In-Q-My R3ManagedConnection ctor does not check for null
 if (cri == null) cri = getDefaultConnectionRequestInfo();
 return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
 public Object createConnectionFactory(ConnectionManager connectionManager) {
 // need to supply a connection factory that can deal with getConnection
 // that does not take a ConnectionSpec
 try {
 return new R3ConnectionFactory(connectionManager, this);
 } catch (javax.resource.ResourceException re) {
 re.printStackTrace();
 throw new java.lang.IllegalStateException(re.getMessage());
 com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
 throws javax.resource.spi.IllegalStateException {
 if (t_cri == null) {
 String strClientNumber = this.getClientNumber();
 if (strClientNumber == null) {
 throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
 String strLanguage = this.getLanguage();
 if (strLanguage == null) {
 throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
 String strUserName = this.getUserName();
 if (strUserName == null) {
 throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
 String strPassword = this.getPassword();
 if (strPassword == null) {
 throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
 t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
 return t_cri;
 public boolean equals(Object obj) {
 if (obj == null) return false;
 if (obj == this) return true;
 if (!this.getClass().isInstance(obj)) return false;
 R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
 return compare(getClientNumber(), mcf.getClientNumber()) &&
 compare(getLanguage(), mcf.getLanguage()) &&
 compare(getUserName(), mcf.getUserName()) &&
 compare(getPassword(), mcf.getPassword()) &&
 compare(getServerName(), mcf.getServerName()) &&
 compare(getSystemNumber(), mcf.getSystemNumber());
 protected final boolean compare(final Object obj1, final Object obj2) {
 if (obj1 == obj2) return true;
 if (obj1 != null) {
 return obj1.equals(obj2);
 } else {
 if (obj2 == null) {
 return true;
 } else {
 return false;
 public int hashCode() { return m_iHashCode; }

Oracle on HP Integrity Servers with Open VMS

Kindly let me know the availability of Oracle Database Server ( with version) on Itanium 2 based HP Integrity Servers (with Open VMS 8.2)

I get the same error as well - pl report this in the "Downloads Issues" forum (Downloads Issues
HTH
Srini

Build and run Sun's PetStore1.3.1_02 application with BEA WebLogic Server 8.1.

build and run Sun's PetStore
1.3.1_02 application with BEA WebLogic Server 8.1.
5) In the same Command Prompt, compile PetStore using the commands:
cd c:\bea\user_projects\domains\petstore
setPetStoreEnv.cmd
cd c:\petstore1.3.1_02\src
ant
buildfile:build.xml does not exist!
build failed
could you tell me how ?
thank you

What we, BEA, provides is a patch to allow you to compile Pet Store for
WebLogic Server. It does not contain the source code.
Sun's Pet Store source code can be found at
http://developer.java.sun.com/developer/releases/petstore/petstore1_3_1_02.h
tml. See the requirements section of README.TXT
You need both in order to make it work.
"Ankur" <[email protected]> wrote in message
news:3fa9f2d9$[email protected]..
Hi Nick,
I tried building the petstore1.3.1_02 application following theinstructions in the readme. But I got an error as the buil.xml file is
missing in the directory.....\petstore1.3.1_02\src.
>
I tried unzipping the downloaded again and for a petstore.domain.jar alongwith the readme. This jar does not contain the build.xml file.
>
Then I tried compiling one by one the component folder and found that the../xmldocuments/src folder has only a build.xml file but no source file...
>
Kinldy suggest what to do? Can you send me the zip via email?
P.S: I have checked the zip and the files are missing.

BEA Weblogic 9.0/Open LDAP communication

We have BEA Weblogic 9.0 and OpenLDAP running on two different machines. I am running a stress/load/performance test on my app and found that there are repetitive calls between Weblogic and OpenLDAP, even though I have configured caching thru Weblogic console? Can any one point me if they have experienced this before and let me know how to solve this or can anyone point me to a place hwere it tells clearly how to turn on caching LDAP requests on the Weblogic side so that I can save precious network calls?
Seetharaman

WebLogic packages these "asm" classes within one of its internal JARs. The issue is easily solved if you insert Hibernate's "cglib" library before WebLogic JARs in the server classpath. Something like this:
set HIB_PATCH=D:\bea9\weblogic90\server\bc_patch\cglib-full-2.0.2.jar
set CLASSPATH=%HIB_PATCH%;%CLASSPATH%
Worked beautifully for me. B-)

Slow execution with BEA Weblogic MSSQL Driver from LD

Any ideas what 3-4 minute delay is from? The stack trace shows it is waiting on the db, but customer says same query executes 'fast' when not executed from LD.
- Mike
LD
I am seeing a strange delay while trying to retrieve data through a database view from MS SQL Server (version : 2000 - 8.00.760) using BEA Weblogic MSSQL Driver version: 3.3.43. Even when I am trying to retrieve a single string record, the query takes more than 3-4 minutes. All other data retrievals against oracle databases all complete within seconds.
I used p6spy to track the jdbc calls and it reports delay in excess of 3 minutes. If the same query is run from a sql analyzer or as a db ctrl in workshop, it returns in seconds. I tried Dataconect drivers also but same result. Changing the jvm also resulted in same behavior.
Even a stripped down query shows same amount of delay occurs:
for $warrantyRep.warranty_info_vw_7 in document("warrantyRep")/db/QADATAPLANADM/dbo/warranty_info_vw
where ($xf:vin_char_1_9 eq $warrantyRep.warranty_info_vw_7/VIN_CHAR_1_9)
and ($xf:vin_char_10_17 eq $warrantyRep.warranty_info_vw_7/VIN_CHAR_10_17)
return
<ns:warrantyRepair>
<ns:dealerCode>{ xf:data($warrantyRep.warranty_info_vw_7/DEALER_CODE) }</ns:dealerCode>
<ns:warrantyRepair>
This is the direct sql call :
select * from warranty_info_vw where vin_char_1_9 = 'JTHBF30G3' AND VIN_CHAR_10_17 = '30142268';
from p6spy logs for the statements invoked by LD:
1104987465855|15|4|statement||SELECT COUNT(*) FROM sysobjects
1104987630621|164766|4|statement|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE ((?) = (t1."VIN_CHAR_1_9")) AND ((?) = (t1."VIN_CHAR_10_17"))|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE (('JTHBF30G3') = (t1."VIN_CHAR_1_9")) AND (('30142268') = (t1."VIN_CHAR_10_17"))
1104987630621|-1||resultset|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE (('JTHBF30G3') = (t1."VIN_CHAR_1_9")) AND (('30142268') = (t1."VIN_CHAR_10_17"))|DEALER_CODE = 62911
1104987630621|-1||resultset|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE (('JTHBF30G3') = (t1."VIN_CHAR_1_9")) AND (('30142268') = (t1."VIN_CHAR_10_17"))|DEALER_CODE = 62911
1104987630621|264000|3|statement|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE ((?) = (t1."VIN_CHAR_1_9")) AND ((?) = (t1."VIN_CHAR_10_17"))|SELECT t1."DEALER_CODE"
FROM "QADATAPLANADM"."dbo"."warranty_info_vw" t1
WHERE (('30142268') = (t1."VIN_CHAR_1_9")) AND (('JTHBF30G3') = (t1."VIN_CHAR_10_17"))
1104987630621|0|4|commit||
1104987630621|0|3|commit||

nevermind - I'm am following the instructions in this thread. Sounds like the problem that I have
http://forums.bea.com/bea/thread.jspa?forumID=2022&threadID=200007092&messageID=200020921&start=-1#200020921

BEA WebLogic 6.0 with Compaq Open VMS

Similar Messages

Maybe you are looking for