Bean problem with creating Adapter Module in NW developer studio

Hi Gurus!
I started to develop an adapter module like described in
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
Unfortunatelly, I'm getting error described on page 9 of the document:
Bean problem: no interface classes found
I cannot resolve this problem. I've tried it also like described in the document, but no success.
Any ideas of what could be wrong?
Thank you!
Marthy

Marthy.,.
Close and open project..standard problem ONLY with nwdi..
Regards
Ravi Raman

Similar Messages

Problem in creating RFC modules in NetWeaver Developer Studio

Hi SDN,
Recently we have upgraded the portal server from EP6 SP9 to EP6 SP19. The applications which are getting data from the backend R/3 system are giving exception
 You are not authorized to logon to the target system. 
So we have now used the NWDS SP19. But we are not able to create the RFC modules as it is giving the same exception even in NWDS.
 How do I go about this???? 
regards
Brahmachaitanya C. Wajapey

Hi Bala,
The exception given is only that much.
When I try to create the RFC, a Dialog box pops up and the error given is

ERROR file opened at 20070516 111750 India Standard, SAP-REL 640,0,154 RFC-VER 3 864900 MT-SL
T:5512 Error in program 'javaw': ======> You are not authorized to logon to the target system.
T:5512 Error in program 'javaw': <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION

Please help me out.
regards
Brahmachaitanya

Problem with mail adapter module in PI 7.11

Hi,
I modified our adapter module from PI 7.0 to be compatible with PI 7.11 SPS3. I followed the instruction in http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417300)ID1491632150DB11633962752589437606End?rid=/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa&overridelayout=true and successfully deployed the adapter module using NWDS for PI 7.1. However, I am encountering this error in the communication channel monitoring:
Exception caught during processing mail message com.sap.aii.af.lib.mp.module.ModuleException.
I don't see any other details in the communication channel monitoring to help me determine the cause of the problem after this error message line. In NWDS, there was no error when I excute build the project. During deployment in NWDS, it says deployment was successful. When I check in NWA, I can find that the adapter module has been deployed successfully. I even tried to re-create the whole adapter module from scrach following the documentation for the 2nd time and still I got the same error message.
I am using java SDK 6.
Any help or suggestion would be greatly appreciated.
Regards,
Elbert

Hi,
This problem is now solved. I am using the correct version of NWDS for PI7.1 and using java 1.6 will not cause any problem.
The problem was caused by the source data being zipped instead of the unzipped version that my module is expecting. Furthermore, since my module comes before the mail bean, there is no details in the communication channel monitoring that the data sent was a wrong format.
Regards,
Elbert

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

How to create Adapter modules

hi experts,
May i know how to create adapter modules..
Thanks & Regards
guna

Hi,
Start with basics:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7bf6e190-0201-0010-83b7-cc557eb76abe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Some good Examples to start with :
Rename Attachment Adapter Module
Copy a file with same filename using XI
Customized Adapter Module
Regards

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Can't use certain filters- "problem with the filter module interface"

Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?

Usually this means a bug in the third party plugin that you are using.

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
 CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
 v_rtb_record_counter = v_rtb_record_counter + 1.
 <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
 v_rtb_record_counter = v_rtb_record_counter + 1.
 v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
 t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_schedule_linesx-sched_line = '0001'.
 t_schedule_linesx-updateflag = c_updateflag.
 t_schedule_linesx-req_qty = 'X'.
 APPEND t_schedule_linesx.
 CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
 t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_schedule_lines-sched_line = '0001'.
 t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
 APPEND t_schedule_lines.
 CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
 IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
 t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_item_inx-updateflag = 'X'.
 t_item_inx-reason_rej = 'X'.
 APPEND t_item_inx.
 CLEAR t_item_inx.
 t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_item_in-reason_rej = 'ZF'.
 APPEND t_item_in.
 CLEAR t_item_in.
 ELSE.
 t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_item_inx-updateflag = 'X'.
 t_item_inx-reason_rej = 'X'.
 APPEND t_item_inx.
 CLEAR t_item_inx.
 t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
 t_item_in-reason_rej = ' '.
 APPEND t_item_in.
 CLEAR t_item_in.
 ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
 v_next_row_index = v_rtb_record_counter + 1.
 IF v_rtb_record_counter = v_rtb_count.
 v_update_order_flg = 'X'.
 ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
 READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
 IF sy-subrc = 0.
 IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
 v_update_order_flg = 'X'.
 ENDIF.
 ENDIF.
 ELSE.
 v_update_order_flg = space.
 ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
 IF v_update_order_flg = 'X'.
 CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
 PERFORMING callbk_bapi_salesorder_change ON END OF TASK
 EXPORTING
 salesdocument = <wa_r_rtb_posnrs>-zrtbvbeln
 order_header_in = v_order_header_in
 order_header_inx = v_order_header_inx
 TABLES
 return = t_return
 schedule_lines = t_schedule_lines
 schedule_linesx = t_schedule_linesx
 order_item_in = t_item_in
 order_item_inx = t_item_inx.
 WAIT UNTIL t_return[] IS NOT INITIAL.
 READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
 IF sy-subrc <> 0.
 ELSE.
 r_return[] = t_return[].
 MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
 RAISE errorinorderupdate.
 ENDIF.
 REFRESH t_schedule_linesx.
 REFRESH t_schedule_lines.
 REFRESH t_item_in.
 REFRESH t_item_inx.
 REFRESH t_return.
 ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 IMPORTING
 return = t_bapiret.
ENDFORM. "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

Bean problem with creating Adapter Module in NW developer studio

Similar Messages

Maybe you are looking for