Beat Map: how do you include a 9/8 bar within 4/4?

The image below is of the midi guide track post Beat Mapping of a 4/4 funky song in which the rhythm turns around just before the bridge displacing the beat a semi-quaver and the groove continues.
I am trying to write a rhythm section part for this, and the best way is for every one to count a bar of 9/8 ( ie 4/4 plus a quaver) so everyone comes into the bridge in the same place.
As you can see, each beat post beat mapping is an 1/8th note out. I need to some how shift Logic's metronome to 'think' that the beats from bar 31 onwards are all on the beat and not displaced?
Message was edited by: musicspirit

Welcome To  Discussions kaybee3!
Here is some additional information.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.10 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor! Examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Tiger On eBay
If your Mac meets the Tiger System Requirements, once Tiger 10.4.x is installed, you can use the PPC 10.4.10 Combo Update, to upgrade to the current version.
Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
Info here Installing Tiger Without A DVD Drive.
The Tiger Media Exchange Program, referred to in that article, is no longer available.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Similar Messages

HT1338 How do you consistently get the scroll bar on the right side of the page

How do you consistently get the scroll bar on the right side of the page.

Go into System Preferences, select General and set "Show scroll bars" to "Always".

How do you unstick the blue progress bar?

how do you unstick the blue progress bar? It most times, just sits there and the refresh button doesn't help.

1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.

How do you sort the safari "Bookmarks Bar" bookmarks

how do you sort the safari "Bookmarks Bar" bookmarks

Here is the workaround for sorting your bookmarks - you don't have to do it manually as suggested in the previous answer here. This is from a 2006 page at Hints.Macworld.com
"One thing that bugs me is that there is no option in Safari to alphabetize bookmarks. I had a crazy idea about how to accomplish this, and it seems to work. Hopefully I'm not missing something more obvious.
What I did was open the Bookmarks window (Bookmarks: Show All Bookmarks), put the links I wanted to alphabetize into a folder, and then dragged that folder into the Finder. The Finder alphabetizes the bookmarks; you can then just drag the folder back into the Bookmarks window. You probably have to set the Finder to arrange files by name before it will work. Hope this helps!
[robg adds: When you drag the folder back, you'll now have two folders, the original and the sorted one. Just delete the original, and you're set. You can also do this without first creating a Safari folder. Just select all the bookmarks to be alphabetized, drag them into a new folder in the Finder, open that folder (make sure it's set to sort by name or use column view), then drag the now-sorted bookmarks back into Safari's Bookmarks window. Again, you'll have duplicates, so just delete the originals (which will be grouped above the newly-placed list). I wonder if any of this is scriptable...]"
If you're like me and you like to keep all of your bookmarks in folders in the Bookmarks bar, then from the Bookmarks window you would open the Bookmarks Bar in a window of its own before doing the above.

How do you include date in PDF export from Keynote 6.2.2

In Keynote '09, I used to be able to insert the date in the bottom of a PDF export. Now that I upgraded to Mavericks, Keynote (6.2.2) appears to only have the option to "include name and date".
That's a useless combination. Those are 2 different things: (1) the filename, and (2) the date. At best, those should be two separate checkboxes.
I miss the feature to add ONLY the date to the PDF generated. I haven't upgraded to Yosemite yet but don't have my hopes up that this feature exists.
Am I missing something? How can I include the date in a PDF exported/printed/saved from a Keynote presentation?

Events are purely automatic, and will only organise on the date and time.
Make an Album of the photos and then you can drag them to any order you want.
Regards
TD

HT2486 How can I send an email to all of the email addresses associated with one contact? Similarly, in regard to group lists, how do you include for distribution all email addresses associated with each contact in the group?

Often times there are multiple email addresses associated with a single contact in address book. How can I included all of these email addresses when creating an address book group?

Don't be surprised.
Apple offers free, basic Mail and Address Book apps and creates paid, more sophisticated solutions, also allowing Developers to provide more sophisticated solutions for sale in the marketplace.
When I need to repeatedly email to multiple contacts, I create a blank draft email, and use the Address Book button to list the appropriate address book group. With the Address Book window open, it's easy to click to add multiple email addresses for a single contact name. Each is added to the message email address list. Then I save that blank email to iCloud Drafts, and it retains the email addreses I've entered. Next time I need to send a message I double-click on it in Drafts to open it, and drag it to one of my other email accounts to add Subject and details, then send from the other account.
Message was edited by: kostby

How do you include static text in select statement in Dynamic pl/sql

I want to include some atatic text and get the output of 4 columns joined with a ":" delimiter within them in a select statement built using Dynamic PL/SQL. How do I build it.
e.g.
Normal select statement would be
select 'MY SKU IS : ', col1||':'||col2||':'||col3||':'||col4 from table1 where ....where condition
and output looks like :
MY SKU IS A:B:C:D
MY SKU IS a:b:c:d
Dynamically I have -
SQL_Stmt := 'select 'MY SKU IS : ', col1||':'||col2||':'||col3||':'||col4 from table1 where '|| wherecondition;
I understand that this does not work because the single quote terminates the string. But my question is how do I achieve the same result with dynamic PL/SQL ? How do I include the static strings and the delimiters. I have tried using double quote, '\'....
????

SQL_Stmt := 'select ''MY SKU is ' || col1 || '':'' ||
                                     col2 || '':'' ||
                                     col3 || '':'' ||
                                     col4 ||
             ' from table1 where ' || wherecondition;

How do you include the actual CLOB value as ASCII when writing XML?

When using the XDK for PL/SQL ( creating XML from query ) and the table that you query has a CLOB column the value in the resulting XML document is
written as:
<column>(CLOB)</column>
how do you get the api to write the actual CLOB data?

That article is talking about choosing HOW to STORE an XML document.
I want to know how to write the contents of a CLOB column along with the other columns in a table in a single XML document.
I know how to store an XML doc as a clob I know how to store an XML doc object relationally.
I I have a table with 5 varchar2 columns 5 number columns and 1 clob column and I create an xml document as a clob from a select * on that table. I then write that clob to the file system. What is the clob columns data going to look like?
its gonna be <column>(CLOB)</column> THATS NOT WHAT I WANT. I want the actual data that was in that CLOB column.
Thank you for all responses.

How do you include extra files with an AIR for iOS Publish?

I've seen people mention they can include .html, .js, etc files with their iOS for AIR publish when making an iOS application from flash.
What I haven't seen is how these people include extra files (html, css, images, videos, etc) to be packaged into the IPA during publish.
How is this accomplished?

--deleted--
Sorry, figured it out.

How do you include a DTD when generating an XML document

Hi
I have just started to use the Java XML Pack to generate a XML document.
How do you put the dtd element
<!DOCTYPE Controller SYSTEM "controller.dtd">
in the generated document.
I am using the following piece of code
public void generate(...)
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.newDocument();
Element rootElement = createElement("Controller");
// Fill out the nodes etc
// Save the result
TransformerFactory tFactory =
TransformerFactory.newInstance();
Transformer transformer = Factory.newTransformer();
File f = new File("dummy.xml");
FileWriter fw = new FileWriter(f);
DOMSource d1 = new
DOMSource(rootElement,"controller.dtd");
StreamResult result = new StreamResult(fw);
transformer.transform(d1, result);
Thanks
Greg

Hello,
I had to go through quite some pain to get this done about a year ago,anyways,here is the solution.
all the import files are in jaxp1.1 bundle.
below is a test class code.
import org.apache.crimson.tree.XmlDocument;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.io.*;
public class CreateDTDInXMLFile {
public CreateDTDInXMLFile() {
public static void main(String[] args) {
try {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.newDocument();
Element root = document.createElement("root");
Element name = document.createElement("name");
name.appendChild(document.createTextNode("Khalid"));
Element address = document.createElement("address");
address.appendChild(document.createTextNode("2022 11th Ave SW"));
root.appendChild(name);
root.appendChild(address);
document.appendChild(root);
((XmlDocument)document).write(System.out);
//the above will print the simple xml doc,now add the dtd
//suppose the dtd is [<!DOCTYPE root SYSTEM "address.dtd">]
((XmlDocument)document).setDoctype(null,"address.dtd",null);
//now print the xml doc again
System.out.println("\n");
((XmlDocument)document).write(System.out);
} catch(ParserConfigurationException pce) {
pce.printStackTrace();
return;
}catch (IOException ioe) {
ioe.printStackTrace();
This will take care of the agony..
Khalid

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How can you create a spry menu bar with no background colour?

How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
Thanks!
HK

Here is the site:
http://partnersnaturally.ca/
I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
Thanks again,
HK

How do you get the the task bar to appear on the cinema screen

Just picked up a new Macbook Air. How do you get the task bar to appear at the bottom of the cinema screen?
Thx,
Chris

Try moving the cursor to the bottom of the screen if dock is set to appear at the bottom of the screen.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

HT1473 How do you rename files on a playlist within iTunes? Trying to rename some files from audio CD. Thanks

How do you rename files on a playlist in iTunes? Don't see a rename function and want to rename files coming in from audio CD as "track one." Thanks

Right-click the track, choose Get Info, and go to the Info tab. Overtype the Name (and/or any other information that you want to change) with the new information. Click OK when you are done.

How do you include the jre in your installs?

This is a fall back and punt question.
My organization develops desktop (Swing) Java apps. To deploy, we have an install program that first runs the JRE install that you download from Sun's web site, then we copy our own jars and data files and so on to the user system. This "two step" approach works, but it's clumsy and ugly.
How do others deploy the JRE? Do you have your customers run the JRE install themselves, automatically run it within your own install, or do you mix Sun's files in with your own and copy them all at one time? If the last, what do you do about registry entries? (As in, worrying about overwriting entries if the user has already installed a newer version of java, etc.) Are there other complications?
I guess I'll just try it and see what happens, but if anybody has some helpful hints I'd be anxious to hear them.

Instead of including the JRE install file and running it you could just include the JRE directory with your install program. (C:\Program Files\Java\j2re1.4.2_05 for example) This way you won't mess up any java installation that may already be on the target machine.
Simply start your app with a batch or .exe file using a relative path to the java/javaw command. I use the following free program along with any standard installer:
http://www.rolemaker.dk/nonRoleMaker/javalauncher/marner_java_launcher.htm

Beat Map: how do you include a 9/8 bar within 4/4?

Similar Messages

Maybe you are looking for