Beat to Death ... MBP Can't Burn Disks ... Mounting and Playing NP

I've been reading these posts for years and now it's my turn. My MBP has a MATSHITA DVD-R UJ-85J and just recently burned it's (apparently) last disk.
The posts I've read suggested two possible 'fixes' neither of which helped. One was blowing air through the front and the other was to run a cleaning disk. Oh, one other suggestion was trying different media. I'm using Taiyo Yuden (Silverback) disks, from what I could find these were supposed to be the 'best'.
Does anyone have any other suggestions - other than 'toss it'? LOL, thank you.

LOL - my normal voice scares most, so yelling should get a little optical drive going.
I have tried the cleaning disk (repeatedly). I think I would replace it if I thought it was within the realm of my capability. Do you know of a 'how to' anywhere? I know there are about 15 screws holding the case together, then there's a 'tape' situation as the halves come apart ..... know this from watching a tech get in to one once .... dealing with the 'taped' portion was tricky.
I really miss the optical drive as I do most of my work on the MBP - now I have to transfer to my old Sawtooth for burning.

Similar Messages

  • Can't burn disk image

    Hello there. I made a disk image with iDVD 6 and when I try to burn it with Disk Utility it just seems to hang and go nonwhere. How do I burn the image in Toast or in any other program? Thanks.

    Ok...
    I've seen many people post that link to "how to burn a DVD from a disc image" using disk utility. I must be doing something wrong because it's not working for me. I know the image is good, because I've transferred it to a PC and it burns just fine. I also know my Super Drive is OK because a burn directly from iDVD works fine, too.
    Here's what I notice about burning from Disk Utility:
    Sometimes, the burn completes but fails in the Verify stage. Other times I get a message to the effect "cannot retry." Which it is doesn't seem to matter much, although I have even seen the "cannot retry" message even on a burn that looks "visually" to be the right length. I realize I should have written this message down but it slipped my mind at the time and I am reluctant to create any more "guaranteed" coasters.
    All of the coasters have one thing in common: there is an inner ring that is burned on my iDVD burns and not burned on my Disk Utility burns. The coasters with the "complete" burns mount and play on my Macs. Even the incomplete burns mount and play, as far as they were burned. They do not mount (i.e. show up as blank) on PCs and will not play in DVD players.
    So, there must be something about the procedure I am following to burn these disks in Disk Utility that is just not right. For the life of me, I can't figure it out. I've stared at these links quite a bit and just not been able to see what I'm doing wrong.
    http://docs.info.apple.com/article.html?artnum=42724
    http://docs.info.apple.com/article.html?artnum=93006
    I saw a post about this, specifically about how a guy spent a bunch of time on the phone with Apple, and all they could tell him was to contact the DVD player manufacturer. Then he found some magical step that nobody mentions that makes it all work. Unfortunately, I closed Safari before printing it, and can't find it now. The subject, I think, was "Apple Support Hung Up on Me."
    Jay

  • En5.1: Can't burn disk from timeline.

    En5.1: Can’t burn disk from timeline.
    Tried to Burn a DVD from a timeline which contained a simple 8 minute AVI program & hung almost at the very beginning of Burn Progress window.
    Encore does burn from disk image folder created by Premiere Elements 10
    Using Windows 7 Service Pack 1 64 bit Dell T7600 computer.
    I must being doing something basically wrong, but I Can’t figure what.
    Help!

    As well as the below, right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems - Run as Administrator http://forums.adobe.com/thread/969395 (Encore AND Premiere)
    Odd Errors http://forums.adobe.com/thread/670174
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558
    And This Message Thread http://forums.adobe.com/thread/665641
    Things and Software to AVOID when authoring/burning a disc
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    Create a DVD output ISO file and then use the FREE Imgburn to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
    Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons
    The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • HT203164 Why won't the song titles transfer with the music when I burn to disc and play on another device?

    Why won't the song titles transfer with the music whaen I burn to disc and play or copy to another program?

    Thank you, reducing the image size worked! I had used a low res file before, and with success decided to increase the resolution/size, and then it didn't work. the image did appear in small preview in the export panel, but wouldn't burn when all was said and done. the dimensions you gave worked fine. unfortunately, it makes the image a little bit fuzzy, but i dont think i can do anything about this. at least it burned it in there. thanks!

  • I have an external hard drive with a shared music folder, which I can access (from Home Sharing) and play music on my Windows computer. On my new Mac, I can see the drive in Home Sharing but not play any music. What's the solution?

    I have an external network hard drive with a shared music folder (WD MyBookLive), which I can access from Home Sharing and play music on my Windows computers. On my new Mac, I can see the drive and the music in Home Sharing but the tracks will not play. All the other authorized computers in my home network show up in Home Sharing and I can play the content. What's the solution?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • How can you listen to music and play a game at the same time?

    How can you listen to music and play a game at the same time?
    I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
    It seems like this should be possible.
    Message was edited by: RuthlessVengeance
    Message was edited by: RuthlessVengeance

    Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
    Mike

  • Can I listen to  music and play a game at same time?

    I would like to listen to music and play a game at the same time. For example can I listen to Pandora and play a card game? How? When I try to go from 1 app to another one closes.

    you can listen to music thats in the iPod part of the phone and play a game, but you can't listen to music from apps like Pandora and use another app to play a game

  • When I sync iphone to itunes, why do my soundtracks not show as albums but via artist?  IE: Pulp Fiction has 16 songs by different artists.  In itunes I can pull up pulp fiction and play the 16 songs.  In iphone sync the 16 songs are seperate

    When I sync iphone to itunes, why do my soundtracks not show as albums but via artist?  IE: Pulp Fiction has 16 songs by different artists.  In itunes I can pull up pulp fiction and play the 16 songs.  In iphone sync the 16 songs are seperate and listed by Al Green, cowboy junkies etc... How to fix this so the ipod part of my iphone will show & play the soundtracks as albums... thanks.

    What is selected under the Music tab for your iPhone sync preferences with iTunes?
    If you have chosen selected playlists, artists, albums, and genres - if Pulp Fiction is available under the Albums section to be selected as an Album to be transferred to your iPhone, is it selected?
    If so, when you select Albums via the iPod on your iPhone, the album is not available there to select?
    You can always create an iTunes playlist with these songs placing the songs in your preferred order.

  • HT1660 can iTunes Playlists be exported and played from a USB drive or an SD card in Ford Sync ?

    can iTunes Playlists be exported and played from a USB drive or an SD card in Ford Sync ? I've been racking my brain trying to get playlists from itunes onto a flash drive and/or SD card to play in Ford Sync. It seems the playlists are "empty" and not associated with any corresponding music files. Sync responds saying "playlists are empty" ?
    The only "work around" I have been able to do is create separate folders on the flash , and name the folders for each corresponding  playlist and copy and paste the appropriate music into the appropriate folders. The limitation being Sync can not recognize folders by voice commands. It recognizes voice commands for playlists, but apparently NOT iTunes playlists ??
    Help

    My script LocaliseM3U should do something similar in Windows.
    tt2

  • How can I browse my network and play my media files?

    I installed a free file explorer on my Android tablet. I can easily browse my network shares and access all my media content. I can play my movies, music, TVshows, anything by just browsing to the folder and selecting the file to play. It took me 5 minutes to figure this out on my Android tablet. I've been trying to do this for about 3 hours on my new ipad 3. I have yet to even find a file browser type app. Please don't tell me there is no way you can do this with an ipad. There is no way to play all your multi-media files with my very expensive ipad. I have so much media content I would love to access via my ipad, but I can't. Has Apple done this on purpose to lock down their devices so users can't do anything flexible? This is a HUGE difference between Android / iOS.
    Also, I'm able to visit music.google.com on my Android to play my music. Besides iTunes, does Apple have a way the user can access a simple website and play their music files? I'm finding all this very troublesome and such a limited factor with Ipad. Please help!
    If it ends up that Apple's brand new ipad can't easily browse a network and play media files then I'm going to return the two of them I bought. Just not a capable device if it can't do something so trivial.
    Thanks.

    I'm still trying to find a way to do this simple task. Everyone has home networks now and not able to simply browse to a folder where you keep your video/music files is quite a problem with such a brand new, ultimate tablet. I can even do this with my Android phone I have. I have terabytes worth of music and movies and if I can't watch them with this ipad tablet then I for sure will return this tablet and buy Android from now on. I'm now finding out how locked down Apple products really are and how limited UNLESS you BUY an app or only go through an Apple type portal. I wonder if people know that you can't play your media you have saved at home with an ipad.

  • I have tried to update for the newest itunes download and it says a error has occured and won't finish the download. I tried burning a cd and playing a dvd but it doesn't work.

    I have tried to update for the newest itunes download and it says a error has occured and won't finish the download. I tried burning a cd and playing a dvd but it doesn't work.

    iTunes help : https://discussions.apple.com/community/itunes/itunes_for_mac 

  • Can't burn disks with Yosemite

    I cannot Burn disks, Yosemite, not from Finder or Toast?
    Mac Mini 2012-OSX 10.10.1

    I will try to get exact message and post, but later, as I must leave for a few hours,
    thanks for the replies

  • Can't burn DVD but image plays just fine in Apple DVD player

    I can make a DVD and save it as an image, which DVD player will play flawlessly. I just can't burn it to a DVD. It fails continuously. Maybe it's my media? Can anyone recommend media known to work well in a MacBook Pro (last version)? Any other suggestions? thanks.

    It is easy to burn from a disk image, and it is better because all the media needed is already within the disk image file. It doesn't have to search, locate and pull in the media for the burn. There are many places for errors to occur. If you have successfully created a disk image file, just burn from that.
    Also, a disk image file is self-contained. You can safely delete both the original iDVD project and the original iMovie used to make it if you are finished editing them. Because the disk image file is small, you will save drive space. You can also burn a new DVD disk of that project any time in the future, without having to remember if you moved the original media, or renamed anything used in that project. Of course, you cannot edit a disk image, but you can't edit a burned DVD disk either.
    Many users here report that DVD-R disks are better and play in more types of set-top players. Others think DVD+R disks work fine. I always use Verbatim DVD-R, burn at 4x or less, create a disk image file of all my iDVD projects and I have never had a burn issue.

Maybe you are looking for

  • Currency display in report

    Hi , I have two Keyfigures created as Amount with Ocurrency ref. In report when i display its also showing the currency near the Keyfigure value.I dont need that , for example 1500 Euros 200 euros I dont need euros.I need only 1500 200 Regards, Logu.

  • Powerbook G4 12" power charger

    My laptop charger has been acting up, and I noticed the chargers have different numbers (45, 60,) and I think mine is 45W. Which one do I need to purchase to replace mine?

  • HT1338 iTunes update won't install on my macbook pro

    I keep getting an error message that the file was corupted on down load.  this has been happening for a month or so.

  • Problem transferring website from one PC to another.

    I'm trying to transfer a site from one PC to another, but it won't open on the second PC. I've tried exporting the site definition and also transferring individual files, all to no avail. It's the same copy of Dreamweaver CS4 on both machines (versio

  • Using jfilechooser

    hi all, how to use jfilechooser to select a file available in another computer of my LAN. i used setFileSelectionMode(JFileChooser.FILES_ONLY);with this statement, if i give 'c:' or any local/mapped drive names in text box, it lists the files properl