Beatmarkers and video in video tips needed

so im experimenting with video in video for the 1st time and have already used beatmarkers for my last project!
So I set up some beatmarkers for my new project and am planning to use video in video also.
Question is whats the best way to do this to create as I go?

When you export from Premiere Pro using the MPEG2-DVD preset, which is designed to then go to Encore to author a DVD, you have Encore import BOTH files
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Similar Messages

CANNOT USE MY ISIGHT AND VIDEO CONFRENCE NEED SERIOUS HELP !!!!

I'VE BEEN TRYING TO USE VIDEO CONFRENCE AND I KEEP GETTING A DID NOT RESPOND ERROR. I OPENED THE REQUIRED PORTS ON MY CPU . IM USING A NETGEAR RANGEMAX 240 WIRELESS ROUTER TO CONNNECT TO THE INTERNET. IM AT MY ENDS TRYING TO FIGURE OUT THE PROBLEM. I SEE OTHER FOLKS BEEN HAVING PROBLEM I HOPE SOMEONE CAN HELP LONELY OLE ME PLEASE....
P>S> IM NOT YELLING I LIKE TO WRITE IN CAPITOL LETTERS

I did the whole upnp on off trick..i was able to do one way video chat but the 2way video chat has been elusive. I dont know the port forwarding numbers so im stuck or hope someone can help with the whole netgear port nonsense thanks for your help though RALPH
Hi Panch007,
Welcome to the Apple Discussion Pages.
Have you opened the ports in the Netgear ?
If you used UPnP try turning it Off anf then On
again.
Also go to System Preferences > Quicktime and set the
Streaming speed (Streaming tab and drop down) to
match your Download speed.
Can you tell us what you think the required ports are
Ralph

I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!

The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

I need to know how to download all photos AND videos from 2 "libraries" within Adobe Revel. Please help.

I was quite angered last night when I posted the first time, so lets try this again:
Here is my setup: I have adobe Revel on my Mac and iOS devices and it has worked quite well to be honest until I recently realized my photos and videos are basically trapped within the software. There is no way (that I am aware) to export all photos/videos or any kind of tool to pull the raw data out of the app and put it into say iPhoto or Lightroom.
Since I am not a fan of this sort of lock-in, (something I despise and encourage companies never to do), I am sadly going to cancel my Revel account once I get this sorted and store my photos elsewhere. This is a huge missed opportunity for Adobe, as the money is not an issue - its simply that the quality of service I need just doesn't seem to be there for this product.
So here is what I am trying to achieve: I simply want every one of my photos and videos to store on my hard drive like the old days. I don't care about folders or hirarcy or any kind of organization - I can do that with the metadata later. I simply want all of my things.
My hang up is in that I have already tried methods like "Show package contents" in the photos/adobe revel route and that works to an extent, but is incredibly cumbersome as I have to sift through all of the many folders. If that were the worst of it, I might be ok. But what is truly alarming and making this difficult is that I don't know where on earth the videos in Revel are actually stored. They show up in the application and I could export them one by one but I literally have hundreds. I can't find the actual files on my Mac anywhere.
Is there anyone at all who can help with this? The goal is to make this transition fairly easy and I feel that Adobe has very intentionally made it very difficult to consider leaving. I spend >$50/month on Adobe services and I am a little in shock this application seems so poorly designed for anything other than just dropping your photos into it. Please, please help if you can. I would be so grateful as Adobe customer service doesn't seem to know or care much about supporting this product.

Hi KDT
Yeah. I agree, if you are used to a situation where "it's on the cloud AND synced down to your hard disk where you can get it" Revel is not exactly that. There were legacy decisions behind that - most not as sinister as you might think but I won't bore you with those details. AND yes you are correct. We currently don't have any way for you to wholesale download everything at once. So you aren't missing anything. Until we provide that mechanism I can provide some guidance.
I'm going to assume you have the current version of Revel on your Mac which is 2.0.
The easiest thing for you to do will be to export your files manually. You can actually select a range of files and export. So it's not a one by one thing.
You'll have to decide how best to perform the selection based on your photography habits. If you tend to take batches of files surrounding specific dates. You could do it by date. In the date view (In the applications upper right "Showing: Dates"). If you look at the end of a date row you'll see a small grid. If you click that grid you are taking into a grid view of just that date. If you select all and file>export you'll export the contents of that date.
The other option is remaining in Grid view (In the applications upper right "Showing:Grid") and perform a shift+selection where you select your first file, move down the desired range and while holding shift you select a second file (standard multi-select stuff).
One thing to keep in mind as you do this. You'll notice when you export you can export original or 'current version'. Export original does just that. Exports unedited original versions of your images as they were uploaded to us. When you export the current version of an image we'll export a rendition of the edited image. This "current version" image is not the original and in most cases will be a rendition that is not the same size as the original. So keep that in mind as you proceed.
Not ideal, I fully realize, but I do hope it gets you closer to having your images back on your hard disk as you desire.
As for your subscription. Assure you have checked your iOS Appstore subscription settings and set Revel to not auto-renew. Unfortunately for a pro-rated refund on the subscription balance you no longer desire you'll need to work with Apple as they hold the purse strings for Appstore purchases. Refunds haven't been a problem in the past so you should have no issue.
Hope this helps.
Jason

Help needed for a new Mac user with his photo and video librarys

after swopping my Ericson for an iphone a year ago. then taking delivery of an iPad on launch day. I have finally taken the plunge and swopped my windows pc for a lovely 27" iMac... what have I been doing all these years using windows? using the Mac is a joy.
As I get more involved with their products I am constantly fascinated (and frustrated) by Apples way of doing things. this situation is no exception and I need Apple people with Apple experience to help me make a decision.　
I am looking at software to organise my photos and videos. I have approximately 7000 photos residing on a windows home server. in addition to that there are some 200 or so HD videos taken with either my Sanyo Xacti camcorder or Sony DSC W300 camera. both cameras I think produce MPEG format
my first experience was iPhoto. great for the `price' but not very flexible. single libraries, poor editing facilities. and because I have files referenced and not copied to my iPhoto library, if I deleted from the library its not deleted from the server (and vice versa). this leads to images being displayed in the library that don't exist etc.
then I downloaded the Aperture 3 trial. great until I came across the `Unsupported file format' situation with the MPEG videos that strangely enough, iPhoto will recognise and play (the Apple way of doing things).
1. should I put the photos on the Mac instead of the server?
2. Is there a better way of managing the images for deletions etc
3. should I stick with Aperture because of the editing
4. is there a better software or way of managing the videos
sorry for the ramble but its all new to me

had a good session on all three of the recommended programs and now have a better understanding of the excellent advice I have been given.
iPhoto
great `free' program that is easy to use but somewhat limited on features. think I would always be looking to upgrade from here (feels a bit boring)
Aperture
really enjoyed using this but at £170! a hefty price tag considering its limited file support. fortunately its only my camera video clips (MPEG) that it wont view. my camcorder files (MP4) are fine so this is looking better as a one stop solution.
Elements
much more than just a image touch up. considering what it can do.. very good value at around £60. teamed with iPhoto it becomes even more attractive.
My issue still remains with the masters file location.
I would prefer to keep all my media on the external server to ensure I have a fail safe recovery option. its a 4TB 5 disk affair which contains all the family music, video images and DVD's etc (likely to change to a Mac server in the future!)
one feature that I cant find, (even in Aperture which surprises me), is the ability to automatically manage deletions from referenced locations? i.e. delete a file from the server and when aperture opens up the thumbnails are updated. or, delete a referenced master in Aperture and an option comes up to delete the referenced file on the external drive.
how would a professional photographer or studio using Aperture manage this process (or would they use something else?)
forgot to mention that through our student facilities i can get a discounted copy of Photoshop CS5 for around £175 which is close to Aperture. is this a worthwhile option or overkill
Message was edited by: buttons129

Video camera - Need to shoot in Black and White

We need to shoot video in black and white, We have tried to shoot in night mode. But the result is the colors being brighter and not lighter. We need to do video coding with these so the colors being too bright is not working out. any imput on a video camera that will shoot in black and white and has an SD card slot?

I have internal memory on some of my cameras and I NEVER use it. It's faster and cheaper to use a USB reader. Why run down your batteries and go looking for a cable.
What can you do with $100 savings? Click on this link...
http://www.bestbuy.com/site/PNY+-+32GB+Secure+Digital+High+Capacity+(SDHC)+Class+10+Memory+Card/2300...
You might even find cheaper SD memory elsewhere. My local computer dealer is selling 16gb for under $10!
With the $100 savings you can spend it on a second battery. Then again, consider spending it on an extended battery so you can record more than 30 minutes. Unless you plan to use the camera connected to the wall at all times.

Pix and Videos gone after update - need help please.

Hi all,
I upgraded to the new OS2 and loved it... no problems there. When I tried to connect and pull pictures off via my PC, I got a message Blackberry Desktop software could not connect. I tried it multiple times after restarting the Playbook but would not connect. It connected and advised I needed to upgrade my software which I did, but when I started the Playbook after the install it was like it was brandnew out of the box. Had to go through the tutorial and then I was shocked to find all my pictures and videos were gone. I don'r care about the videos but had some really important (to me at least) pictures I wanted off of it.
Sooooo.... any chance of recovering those or does the updates just "Blow" everything away? I will never use my Playbook to take any pictures or video of anything again and guess I learned a painful lesson.
Thanks for ANY input you might be able to provide.

Same thing happened to me. RIM <Inappropriate Content Removed>
this one up.

DO i need some extra hardware interface for receving both Audio and video

hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
     config= new Config();
     GridBagLayout gridBagLayout= new GridBagLayout();
     GridBagConstraints gbc;
     JPanel p= new JPanel();
     p.setLayout( gridBagLayout);
     JPanel localPanel= createLocalPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.gridwidth= 2;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
     p.add( localPanel);
     JPanel targetPanel= createTargetPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 1;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
     JPanel mediaPanel= createMediaPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 2;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
     update.setEnabled( false);
     rtcp.addActionListener( this);
     update.addActionListener( this);
     buttonPanel.add( rtcp);
     buttonPanel.add( update);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 3;
gbc.gridwidth= 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
     p.add( buttonPanel);
getContentPane().add( p);
     list.addMouseListener( this);
     addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "Media Locator:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_media_file= new JTextField( 35);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
     p.add( tf_media_file);
     tf_media_file.setText( config.media_locator);
     cb_loop= new JCheckBox( "loop");
     startXmit= new JButton( "Start Transmission");
     startXmit.setEnabled( true);
     startXmit.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 2;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
     p.add( cb_loop);
     cb_loop.setSelected( true);
     cb_loop.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
     p.add( startXmit);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
     p.setBorder( titledBorder);
     return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     targets= new Vector();
     for( int i= 0; i < config.targets.size(); i++) {
     targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
     list.addKeyListener( this);
     list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
     p.add( scrollPane);
JPanel p1= new JPanel();
     p1.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_address= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
     p1.add( tf_remote_address);
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
     p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
     p2.add( addTarget);
     p2.add( removeTarget);
     addTarget.addActionListener( this);
     removeTarget.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.gridwidth= 2;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 20,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
     p1.add( p2);
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
     p.add( p1);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
     p.setBorder( titledBorder);
     return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     JTextField tf_local_host= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
     p.add( tf_local_host);
     try {
String host= InetAddress.getLocalHost().getHostAddress();
     tf_local_host.setText( host);
     } catch( UnknownHostException e) {
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
     p.add( tf_data_port);
     tf_data_port.setText( config.local_data_port);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
     p.setBorder( titledBorder);
     return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
     if( source == addTarget) {
     String ip= tf_remote_address.getText().trim();
     String port= tf_remote_data_port.getText().trim();
     String localPort= tf_data_port.getText().trim();
     addTargetToList( localPort, ip, port);
     if( avTransmitter != null) {
     avTransmitter.addTarget( ip, port);
     } else if( source == removeTarget) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          if( avTransmitter != null) {
     avTransmitter.removeTarget( target.ip, target.port);
          targets.removeElement( target);
          listModel.setData( targets);
     } else if( source == startXmit) {
     if( startXmit.getLabel().equals( "Start Transmission")) {
     int data_port= new Integer( tf_data_port.getText()).intValue();
          avTransmitter= new AVTransmitter( this, data_port);
     avTransmitter.start( tf_media_file.getText().trim(), targets);
          avTransmitter.setLooping( cb_loop.isSelected());
     startXmit.setLabel( "Stop Transmission");
     } else if( startXmit.getLabel().equals( "Stop Transmission")) {
          avTransmitter.stop();
          avTransmitter= null;
          removeNonBaseTargets();
          listModel.setData( targets);
     startXmit.setLabel( "Start Transmission");
     } else if( source == rtcp) {
     if( rtcpViewer == null) {
     rtcpViewer= new RTCPViewer();
     } else {
          rtcpViewer.setVisible( true);
          rtcpViewer.toFront();
     } else if( source == cb_loop) {
     if( avTransmitter != null) {
          avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
     String localPort= tf_data_port.getText().trim();
     for( int i= targets.size(); i > 0;) {
     Target target= (Target) targets.elementAt( i - 1);
     if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
     i--;
public void addTargetToList( String localPort,
                         String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
                              port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
     if( rtcpViewer != null) {
     rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
     config.local_data_port= tf_data_port.getText().trim();
     config.targets= new Vector();
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( config.local_data_port)) {
          config.addTarget( target.ip, target.port);
     config.media_locator= tf_media_file.getText().trim();
     config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          tf_remote_address.setText( target.ip);
          tf_remote_data_port.setText( target.port);
     int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
     this.options= options;
public int getSize() {
     int size;
     if( options == null) {
     size= 0;
     } else {
     size= options.size();
     return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
     Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
     } else {
     name= null;
     return name;
public void setData( Vector data) {
     options= data;
     fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
               TargetListModel listModel, Vector targets) {
     this.localPort= localPort;
     this.ip= ip;
     this.port= port;
     this.listModel= listModel;
     this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
     if( !targetExists( localPort, ip, port)) {
     targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
     boolean exists= false;
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( localPort)
     && target.ip.equals( ip)
          && target.port.equals( port)) {
          exists= true;
     break;
     return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
     this.tx= tx;
     local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
     String result;
     locator= new MediaLocator( filename);
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null) {
     return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter( targets);
     if (result != null) {
     processor.close();
     processor = null;
     return result;
     // Start the transmission
     processor.start();
     return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     localPorts = new int[ pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     // for (int i = 0; i < 1; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
          port = local_data_port + 2*i;
          localPorts[ i]= port;
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addReceiveStreamListener(this);
          rtpMgrs[i].addRemoteListener(this);
     for( int k= 0; k < targets.size(); k++) {
          Target target= (Target) targets.elementAt( k);
          int targetPort= new Integer( target.port).intValue();
          addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          e.printStackTrace();
          return e.getMessage();
     return null;
public void addTarget( String ip, String port) {
     for (int i= 0; i < rtpMgrs.length; i++) {
     int targetPort= new Integer( port).intValue();
     addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     mgr.addTarget( addr);
     tx.addTargetToList( localPort + "", ip, port + "");
     } catch( Exception e) {
     e.printStackTrace();
public void removeTarget( String ip, String port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
     } catch( Exception e) {
     e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
     System.out.println( ce);
     if( ce instanceof DurationUpdateEvent) {
     Time duration= ((DurationUpdateEvent) ce).getDuration();
     System.out.println( "duration: " + duration.getSeconds());
     } else if( ce instanceof EndOfMediaEvent) {
     System.out.println( "END OF MEDIA - looping=" + looping);
     if( looping) {
     processor.setMediaTime( new Time( 0));
          processor.start();
public void setLooping( boolean flag) {
     looping= flag;
public void update( ReceiveStreamEvent event) {
     String timestamp= getTimestamp();
     StringBuffer sb= new StringBuffer();
     if( event instanceof InactiveReceiveStreamEvent) {
     sb.append( timestamp + " Inactive Receive Stream");
     } else if( event instanceof ByeEvent) {
     sb.append( timestamp + " Bye");
     } else {
     System.out.println( "ReceiveStreamEvent: "+ event);
     tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
     String timestamp= getTimestamp();
     if( event instanceof ReceiverReportEvent) {
     ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
     StringBuffer sb= new StringBuffer();
     sb.append( timestamp + " RR");
     if( rr != null) {
          Participant participant= rr.getParticipant();
          if( participant != null) {
          sb.append( " from " + participant.getCNAME());
          sb.append( " ssrc=" + rr.getSSRC());
          } else {
          sb.append( " ssrc=" + rr.getSSRC());
          tx.rtcpReport( sb.toString());
     } else {
     System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
     String timestamp;
     Calendar calendar= Calendar.getInstance();
     int hour= calendar.get( Calendar.HOUR_OF_DAY);
     String hourStr= formatTime( hour);
     int minute= calendar.get( Calendar.MINUTE);
     String minuteStr= formatTime( minute);
     int second= calendar.get( Calendar.SECOND);
     String secondStr= formatTime( second);
     timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
     return timestamp;
private String formatTime( int time) {
     String timeStr;
     if( time < 10) {
     timeStr= "0" + time;
     } else {
     timeStr= "" + time;
     return timeStr;
* Stops the transmission if already started
public void stop() {
     synchronized (this) {
     if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTargets( "Session ended.");
          rtpMgrs[ i].dispose();
public String createProcessor() {
     if (locator == null) {
     return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
     ds = javax.media.Manager.createDataSource(locator);
     } catch (Exception e) {
     return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
     processor = javax.media.Manager.createProcessor(ds);
     processor.addControllerListener( this);
     } catch (NoProcessorException npe) {
     return "Couldn't create processor";
     } catch (IOException ioe) {
     return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
     return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
     return "Couldn't find tracks in processor";
     // Set the output content descriptor to RAW_RTP
     // This will limit the supported formats reported from
     // Track.getSupportedFormats to only valid RTP formats.
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     Format supported[];
     Format chosen;
     boolean atLeastOneTrack = false;
     // Program the tracks.
     for (int i = 0; i < tracks.length; i++) {
     Format format = tracks[i].getFormat();
     if (tracks[i].isEnabled()) {
          supported = tracks[i].getSupportedFormats();
          // We've set the output content to the RAW_RTP.
          // So all the supported formats should work with RTP.
          // We'll just pick the first one.
          if (supported.length > 0) {
          if (supported[0] instanceof VideoFormat) {
               // For video formats, we should double check the
               // sizes since not all formats work in all sizes.
               chosen = checkForVideoSizes(tracks[i].getFormat(),
                                   supported[0]);
          } else
               chosen = supported[0];
          tracks[i].setFormat(chosen);
          System.err.println("Track " + i + " is set to transmit as:");
          System.err.println(" " + chosen);
          atLeastOneTrack = true;
          } else
          tracks[i].setEnabled(false);
     } else
          tracks[i].setEnabled(false);
     if (!atLeastOneTrack)
     return "Couldn't set any of the tracks to a valid RTP format";
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // audio frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
     int width, height;
     Dimension size = ((VideoFormat)original).getSize();
     Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
     Format h263Fmt = new Format(VideoFormat.H263_RTP);
     if (supported.matches(jpegFmt)) {
     // For JPEG, make sure width and height are divisible by 8.
     width = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
     height = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
     } else if (supported.matches(h263Fmt)) {
     // For H.263, we only support some specific sizes.
     if (size.width < 128) {
          width = 128;
          height = 96;
     } else if (size.width < 176) {
          width = 176;
          height = 144;
     } else {
          width = 352;
          height = 288;
     } else {
     // We don't know this particular format. We'll just
     // leave it alone then.
     return supported;
     return (new VideoFormat(null,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    null,
                    Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realiz

I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works

Is it possible to transfer music/videos from one itunes account to a separate one? I need to give my music and videos that I bought a grandchild to her for her ipad.

Is it possible to transfer music/videos from my itunes account to a grandchild (she will need her own account) I bought her music and videos and let her play with my ipod touch. Now she has an ipad.

No you cannot transfer purchases from one account to another account. Apple does not allow it and never has allowed it.
She can use you Apple ID on the device and switch between her ID and your ID, but that can cause problems at times and can become a bit of a pain.

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

I need help on back up and more storage for photos and videos. I have a imac (500g) that I back up to a 500g hard drive using time machine. How do I set up a larger hd and back that up as well?

I can buy a 1T hd to store photos and videos to, but would need a second one to back that up as well? I guess I need to know how to get aperture and iphoto to keep my photos on a larger drive and how to keep both the imac and that larger hd backed up. Note- we can't get DSL, so off site back up isn't a viable option.

Move your photo and video libraries to an external HD. Apple explains how to do this in:
iPhoto: How to move the Library to an EHD

How do I take photo's and video's off my iPhone without using iPhoto? It keeps crashing and to update I need to remove my photos-a catch 22??

How do I take the photo's and video's off my iPhone?... if 'iPhoto' on my mac keeps continually crashing and now refuses to open…?
I need to do this to update my apple software in iTunes, so that I can rid the bugs on my phone and take photo's again.
Is there another way to take the photos/videos off my iPhone and onto the mac? and also to delete them off the phone after I have put them on my hard drive?
It use to be as simple as find, drag and drop into a folder on my old pc. This should be much simpler, any advice or direction extremely welcome……?
From iphotofandango

Hi Iphotofandango,
There is an alternative to using iPhoto for transferring photos from an iOS device. You can use Image Capture, which will allow you to transfer photos easily. Image Capture is a tool already on your Mac. The following article may help:
Image Capture: Transfer images and other items from your device
Transfer images, video clips, and MP3 sounds to your computer from many cameras and devices that contain a camera, such as your iPhone. Once you transfer the items, you can delete them from the device.
Connect your device to your computer, then turn the device on.If the device is locked with a passcode, enter it.
In Image Capture, select the device in the Devices list.
Use the buttons at the bottom of the Image Capture window to view the thumbnails as a list or as icons to change the size of the thumbnails, or to rotate or delete images.
From the Import To pop-up menu, choose where to save the images or which app to use to open the image.
To import only some of the photos, select those photos, then click Import. To import all the photos, click Import All.Choose AutoImporter from the “Connecting this [device] opens” pop-up menu to transfer images from a device to your computer whenever you connect it to your computer.
Select “Delete after Import” to remove the items from the device after transferring them to your computer. You can also select individual items on your device, then press the Delete key on your keyboard.
For more information about connecting and using your device, refer to the documentation that came with it.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

How can i get my photos and videos back after backing up from my 2nd generation ipod into my 5th generation ipod? I really need those photos but i dont know how.

I downloaded the new itunes. So, i plugged in my 5th generation ipod and when i plugged it in, it asked me if i want to set it as new ipod or back up from the 2nd generation ipod touch that i plugged in before, i accidently clicked on the back up from before so it when its done, it looked like my 2nd gen. ipod and i dont like it. All my photos and videos from 5th gen. Ipod were all gone and there are some pictures that i really need as soon as possible. Is there a way i can i can get those photos and videos back? I really need them. :(

Did you fail to import them to your computer?
If so, then they are gone.

OT: What viewers do you need to use ALL audio and video files?

I had a lot of trouble with audio and video files on my PC. I
now have a
MacBook Pro, which is a big improvement. But I still
frequently
encounter files that I can't use. I try to open them, but
Apple doesn't
know what to do with them. For example, I often encounter
unusable
videos while perusing news websites. I also have some audio
files with
.mva or .mvw extensions that don't work.
So what viwers/players do I need to download in order to be
able to play
every audio/video file that comes my way? iTunes handles .mp3
files, and
I also have QuickTime installed. I just viewed another video
after I
installed a Flash plugin. What else do I need to install?
Thanks.
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

VLC is a big favorite
http://www.macupdate.com/app/mac/5758/vlc-media-player

Beatmarkers and video in video tips needed

Similar Messages

Maybe you are looking for