Beats Audio after update to win.10 from 8.1

Hello i ve updated windows on my ntb and i have little troubles with my beats.When i switch on ntb sound is good but after time is bass, treble, center, space and focus shout down.I ve tried update driver, reinstall, uninstall and install but nothing.Everything is heppening when i am on internet. When i am not on internet its allright.Ive tried reinstall or update driver for internet connection but nothing. Please help me someone. my ntb is Pavilion 15 J1R83EA#BCM now with win 10

You have to UPGRADE your 8.1 operating system to Windows 10 first. After the upgrade the it should be automatically activated. After that you can do clean install of Windows 10. It will be automatically activated when online. (During installation it will ask for Product Key couple of times, just click on skip) Since you have already done clean install without upgrading first, you will have to reinstall original Windows 8.1 or do recovery installation. Once you've done that, you upgrade to Windows 10 and do clean install afterwards. (Make sure it's activated before clean install) Remember, the Windows 10 is tied to your paticular computer/motherboard and can not be transfered to other computer/tablet.

Similar Messages

Microphone Problem in Beats Audio after upgrading to Win 10

I have a HP Envy 15 j103tx laptop which I recently upgraded to Windows 10. After upgrading, the sound worked well but the little checkbox next to the output source stopped working. As you can see I have two playback devices: one my laptop's speaker and other my tv's speaker which I have connected with a hdmi. I cannot select my device through the checkbox now. It doesn't do anything. Similarly, I also cannot select the Internal Microphone of my laptop. Due to which my microphone no longer works. I have tried to uninstall the IDT drivers and codec and reinstalling it through the HP Customer Support page. http://support.hp.com/gb-en/drivers/selfservice/hp-envy-touchsmart-15-j100-notebook-pc-series/5401191/model/6413154 . But to no avail. I request Hp to solve my problem as soon as possible.

Hi tien huu!
I have an article for you that can help you understand how to adjust your input volume from your built-in microphone on Mountain Lion. That article can be found here:
OS X Mountain Lion: Change the sound input volume
http://support.apple.com/kb/PH10824
Also, this article will help you understand some of the options you have in the sound input pane of Mountain Lion:
OS X Mountain Lion: Input pane of Sound preferences
http://support.apple.com/kb/PH10925
Thanks for using the Apple Support Communities!
Cheers,
Braden

After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).

After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).

I RESOLVED THE ISSUE. I uninstalled the converter. Re installed after a cold boot.
The sites that would not load properly: I did a ixquick search of the titles that wouldn't download and found them at another location. They then downloaded perfectly. from the new location

Y510P SLI not working after update to Win 8.1

Hi, my SLI is not working after update to win 8.1. (i just factory reset my computer recently). i know that i have to update my vBIOS in order for my 2nd GPU to work in win 8.1. I have updated it and reboot my computer, but nothing happens and my 2nd GPU is still not working. I have checked in device manager that my 2nd gpu is working properly. I have not update my drivers to the latest since the factory reset. Please help me out

Hi Thanks for the help, i appreciate it. But, i have already updated my BiOS for the SLI before i posted this, the actual problem is that the 2nd GPU still does not work even after the update

HT4623 after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

I cannot print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

I cannot seem to print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

Try re-adding your printer in System Preferences/Print & Fax. Not sure what type of printer you have, but if it was old and relying on an Appletalk connection, Snow Leopard dropped that support.

Lost audio after update today

Hp Pavillion dm4
Lost audio after update today, 2nd effin time this has happened, **bleep**?

Hm.. I never have problems with audio in Windows 7..
Just try this:
Please run the Sound troubleshooting tool by going to Control Panel -> Troubleshooting -> Troubleshoot audio playback -> follow the wizard to troubleshoot the issue.
Regards,
BBot

After updating my iPad 3 from iOS 7.0.6 to 7.1 I can't do anything. It constantly reboots while trying to restore backup. Epic Fail!

My attempts to update my ipad 3 to IOS 7.1 via iTunes on my Mac Pro has essentially bricked it. I carefully made a backup before doing the update but its of little use. The iPad installs the firmware update and reboots and asks about the backup to restore and begins the sync. But, it reboots about 20 times while trying to restore the beast.
It is a 64 gb ipad and was pretty full so retrying to restore from backup is taking 6 hours each time. Maddening!
I've spent months setting it up. The thought of restoring as NEW is so depressing.
The initial attempt I did over night was just unusable this morning. I couldn't get past the Apple Logo. I finally gave up and put it into recovery mode and redid it a second time. It must have rebooted 20 times while copying all the apps and media back. It made it but was then useless again after being disconnected from the Mac.
I then tried once again and aborted it after it was rebooting again constantly during the restore from backup.
It seems to be OK thru the firmware install but it can't seem to use my backup. I'm going to try and restore as NEW just to see if it will work at all. At that point maybe I'll try and manually restore the backup so I don't lose all that organization.
Anyone got any better ideas? I'm refusing to thing about "upgrading" my iphone 5 until I see how this comes out....
goose

Slone,
I finally decided to turn this annoyance into an opportunity. After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new. I have a lot of time on my hands and I had 1424 apps on my iPad! This is why every attempt to restore took so long.
I decided to restore as new, spend a day restoring the apps I really used. Doing so gave me a quick iPad with only bout a quarter of the storage used.
Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup. I'll do that someday if I even miss the files I've probably forgotten that are there.
Anyway, there was nothing wrong with my hardware. I think there were just some troublesome setup items that 7.1 didn't like. Once set up as new, the ipad was fine.
Good luck!

Very Low Audio after Updating iPod wVideo 60 GB

After updating to latest software for iPod with video 60 GB, the audio on all of my songs is extremely low. I have to turn the volume nearly to max to hear at a modest level. I also get Zero bass now.
Any thoughts?
Thanks!

Thanks dude for the help, that's a very useful tip for many reasons.
It didn't resolve my problem and then I recalled that I have another set of headpones from my old iRiver. I plug those headphones (which were used excessively for 2 years) and my sound is instantly back.
Basically, iPod headphones (that I have had since November 2005) are totally shot. They are absolute crapola. Geeze, they might as well sell the **** things without headphones, just go straight to after-market set.

HT3532 ipad mini retina ios 8.0.2 after update no sound even from phone jack also no sound.

Ipad mini retina after update ios8.0.2 no sound from speaker and phone jack, bluetooth and wifi no stable...

This is the iPhoto for Mac forum - I have requested that your post be moved to the correct forum
LN

Qosmio X870-149 - Black screen after Update to win 8.1

After an update to win 8.1 I got a black screen after login , the only thing I could do was to press zero during startup and make a recovery installation .
It took 40 houres , I do not know why it took so long , but when it was over, the HDD was completely empty , so I installed win 7 instead , since I had not made ??a recovery CD . The problem now is that I still get black screen in between , and thinking that it might be a heat problem , I still have warranty , but I do not know if it applies when I installed win 7 on the machine.
I still have a warranty on my toshiba Qosmio

Hi
Well, the warranty covers the hardware related problems. It does not cover any issues related to the software.
Now the open question is: why the black screen appears?
Is it hardware or software issue?
What happens if you access the BIOS?
Can you see anything on the screen?
Is something visible on the external monitor?

Explorer.exe keeps crashing after update to 8.1 from 8

After updating to the 8.1 explorer.exe keeps crashing, no solution found online for the problem...only clue I get is very clear and obvious message in event log:
Faulting application name: explorer.exe, version: 6.3.9600.16441, time stamp: 0x5265dec8
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16496, time stamp: 0x52b3f283
Exception code: 0xe06d7363
Fault offset: 0x0000000000005a88
Faulting process id: 0x1664
Faulting application start time: 0x01cf52b7670e4534
Faulting application path: C:\WINDOWS\explorer.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: a4c05eaf-beaa-11e3-be98-ca4f0724b24c
Faulting package full name:
Faulting package-relative application ID:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-07T23:16:27.000000000Z
EventRecordID
16783
Channel
Application
Computer
Dell
Security
EventData
explorer.exe
6.3.9600.16441
5265dec8
KERNELBASE.dll
6.3.9600.16496
52b3f283
e06d7363
0000000000005a88
1664
01cf52b7670e4534
C:\WINDOWS\explorer.exe
C:\WINDOWS\system32\KERNELBASE.dll
a4c05eaf-beaa-11e3-be98-ca4f0724b24c
really helpful. Cannot understand why Microsoft were pushing me to update from poorly performing windows 8 to complete nuisance windows 8.1. My hardly earned money were spent on a product that causes me massive headache.
Unfortunately Microsoft does not allow me to post the link to skydrive where I keep the dmp fo review. Another great gift from them.

0:050> lmvm rse
start end module name
00007ffd`abc10000 00007ffd`abec6000 rse (export symbols) rse.dll
Loaded symbol image file: rse.dll
Image path: C:\Program Files\Autodesk\Inventor 2014\Bin\rse.dll
Image name: rse.dll
Timestamp: Fri Mar 01 06:00:41 2013 (512FD389)
CheckSum: 002B8E46
ImageSize: 002B6000
File version: 18.0.17000.0
Product version: 1.0.0.1
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Autodesk, Inc.
ProductName: Autodesk, Inc. rse
InternalName: rse
OriginalFilename: rse.dll
ProductVersion: Autodesk Inventor 2014
FileVersion: 18, 0, 17000, 0000
PrivateBuild: Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
SpecialBuild: Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
FileDescription: rse
LegalCopyright: Copyright © 1996-2013 Autodesk, Inc.
LegalTrademarks: Copyright © 1996-2013 Autodesk, Inc.
Comments: Copyright © 1996-2013 Autodesk, Inc.
Hi,
The dump file has been analyzed by auggy, and the problem is on the rse.dll.
Please refer to the suggestions auggy provided, If you need further assistance, feel free to let me know. I will be more than happy to be of assistance.
If the suggestion is helpful, please remember to mark it as answer which can benefit others who may encounter the similar issue as yours. Otherwise, please unpropose it and provide the latest dump file for further assistance.
Regards,
Kelvin Xu
TechNet Community Support

MacBook OSX 10.6.5 No audio after update

Hello, My aluminum 13" MacBook has been fine up until a few weeks ago. The internal speakers do not work after Mac OSX 10.6.5 boots up. I hear the 'gong' on initial start up... but no audio after OSX boots. I have tried plugging in headphones, using a toothpick- nothing works. The sound preferences show 'Internal Speakers' and Built in.
Another interesting fact is iTunes reports "an unknown error occurred -200". Very helpful message.
If I boot into Windows Vista using BootCamp.. audio works just fine. So, the speakers and audio hardware are not malfunctioning. It's clearly an OSX configuration problem.
Any ideas on what I can do to get my audio back? The only thing that has changed was I let Apple Updater install a few patches.

If you have not already done so, run Disk Utility's "Verify Disk" & "Repair Permissions" routines on your startup drive (in that order). If the verify disk step finds any problems, you must correct them before continuing.
Try creating a new, temporary user account. Restart your Mac, logging into that account only. If the speakers now work then something associated with your normal user account is the problem, such as a login item or bad preference file.
If the speakers still don't work with this account, you can delete it. Then try starting up in Safe Mode. If the speakers now work something that Safe Mode disables is the culprit, such as a third party or non-essential extension, an add-on system modifier, startup item, etc.
If none of the above help, try downloading & installing the 10.5.6 combo update. If that doesn't help then you may need to reinstall the OS & update it to the current version.

HT4623 after update of 6.1 from 4.3.3 on my 3gs it is asking to activate my iphone through itunes but it gives me error missing sim card please enter sim card

after update of my iphone 3gs it is giving me error insert sim

Sounds like your phone was hacked to be used with your carrier. There's no way to get it to activate without a SIM from the ORIGINAL carrier

Problems with Audio after update to Firmware 2.1

Dear Blackberry users
Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
Pairing is okay, but the audio stream comes with no volume.
Urgent help would be welcome . Thank you.
Clemens Heddier/Germany

I dont have my BT gateway with me but will test tonight.
Have you tried removing the pairing and pair it again?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Beats Audio after update to win.10 from 8.1

Similar Messages

Maybe you are looking for