Beats audio gone? HELP!!!

I have a Envy 6-1010US Sleekbook, I never knew how to turn on the audio but at least I could see it was there in the task bar. But now I updated it to Windows 8 and now I can not find it at ALL! Please help me fix this!

Hi,
In Windows 8 just hold down the Windows key and tap the X key once. That should invoke a menu onscreen. Select Control Panel from the menu. In the Control Panel look for the Beats Audio Control Panelcontrol and select it.
-erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I had to install a new hard drive and I lost my beats audio please help

I have a HP Pavilion dv7 7135us Entertainment Notebook PC and recently lost my hard drive and had to install a new one and now I don't have me beats audio or any of the settings for it, can someone please help me out?

Hi,
Please try the follwing package:
ftp://ftp.hp.com/pub/softpaq/sp57501-58000/sp57966.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Beats Audio gone?

Had to replace my hard drive on HP laptop. Nothing salvaged from old hdd. Noticed yesterday the sound sucks. Is it possible Beats Audio was wiped out along with old HDD?
Any recourse?
Thx.

HI @HarrisG
Thank you for your inquiry, I will do my best to assist you!
I grasp you had to replace the hard drive and were not able to salvage anything.
When you reinstalled the Operating System how did you do it. Did you do a recovery or a clean installation from a disk?
If you installed from a Windows disk is it the original Operating System?
Have you done all the Windows updates?
If you did a recovery you can run the HP Support Assistant to aid with HP updates?
You can also check the HP Drivers & Downloads page for your notebook to acquire any recommend drivers.
You will need to input your exact model and follow the prompts
How Do I Find My Model Number or Product Number?
You could also try running MS Fix It to help solve difficulties.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows 10 speakers are gone, beats audio is gone

ok, downloaded wimdows 10... now i have amajor issue..lol... beats audio is completley gone, poof, see ya.. dosent exist in this laptop.. and to make matters even better according to my sound or volume mixer my laptop has no speakers what so ever... tried to update driver for audio and it is giving me the error there was a problem messege... ready to go back to windows 8.1 and say the heck with this... so any help would be greatly appriciated

i had the same issue.don't change the "IDT high definition driver" as the other user says to do!! use the same driver that you used in windows 8.1.to solve the audio issue you have to:- click right on the speaker icon on the right of your desktop;- select "playback devices";- select "advance" and change the default format with an higher or lower value;- applynow your speakers will work again

HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.

Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Please help me install the beats audio. Mine was lost after installing windows home premium. Thanks.

Product name: Pavilion dm1-4000au
Product number: QG411PA
This question was solved.
View Solution.

Hi,
Download and install the IDT driver on the link below - this should also install the Beats Audio interface.
http://ftp.hp.com/pub/softpaq/sp54001-54500/sp54236.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats-Audio / Sound System Enhancement dv7 / HP Envy 15

Beats-Audio - Sound system Enhancement
Test system
dv7t – 6100 Quad / Windows 7- 64bit
Beats-audio
Introduction - Cave Sound Caper
Edits 29-Nov-2011
This is a re-write of this document.
Parts One and Two have been flipped. It's a work in progress.
The purpose of this Post is to provide a method to enhance the sound coming from your onboard beats-audio speakers. The quality of the sound should improve - more importantly, MORE sound should be available. This is important if your system is suffering from lack of enough sound from the onboard speaker system.
This process does not make use of the Loudness Equalization enhancement. I tested the Loudness Equalization enhancement (for a different purpose). Setting the enhancement on my test system and then switching the enhancement off resulted in the “Low Sound” syndrome. It took some amount of work to recover from that mess. The Loudness Equalization enhancement, in this author's opinion, is to be avoided unless its use is necessary.
FLIPPED:
The original intent of this procedure has been to provide a means to increase the amount of sound available from the onboard speakers on notebooks that are equipped with beats-audio IDT sound drivers. The “Pre-work” on my original post was overwhelming the intent. If your system is healthy, and the only reason to read this document is to enhance the amount of sound from the speakers, there is no need to hash through the work to fix your IDT driver installation. I’ve moved that section to the end – IDT installation and other work has become Part Two.
You must have your IDT HD driver successfully installed into your system.   The proper IDT HD driver contains the beats-audio interface.
Where to Start?
If you have “No Sound”, the Enhancement process may not work for your system. Please take a look at Part Two and decide whether any of the steps in that section apply to you. It is not my intention that you waste your time trying things you’ve already done over and over to regain the sound on your system. There are many posts on the forum on how fix “No sound”. This post addresses only a couple of “No sound” issues.   There is one slight possibility – see the section about the controls in iTunes – make sure your sound players volume controls are not mis-matched – and make sure you didn’t turn something OFF by accident. If you turned off the sound while watching a movie and now the HDMI sound is off - Poof! You might not have any sound – anywhere. It's just something to check...
If you have “Low Sound”, you might consider reinstalling your IDT driver to see if the issue can be corrected: IDT reinstallation is described in Part Two.
SideBar: As of 24-Nov-2011
If you have a dv7t: check on your HP Software and Driver website for a new IDT HD audio driver. Depending on your model, there may be a new version of the IDT driver, BIOS, and other important updates.
Part One
Some Setup Checks and on to the Enhancement
Make sure all basic Sound settings are set to “Default” to start.
Portions of this procedure are "not of my invention". Full credit will be given later in the Post. This section explains how to increase the amount of sound coming from the onboard speakers. It also attempts to give you a bit of control over the kind of sound coming from the speakers that you may not have at the present. Beats-audio is great; frankly, though - it's made for external powered speakers or headphones... what you get from the speakers on the notebook leaves something to be desired.
A while back I found a very interesting post on the topic of increasing the sound from the onboard speakers. The post was originally written for the HP Envy15. I believe the post has merit - Part One of this procedure is based on that original post.
I tested the suggested combined actions – it does work (at least on a healthy system). The sound quality showed improvement over the standard “out-of-the-box” beats-audio setup and the quantity of volume increased. In other words, this procedure makes the sound coming from the onboard speakers louder without the use of the Loudness Equalization enhancement setting.
I would suggest trying this “Enhancement” under the following circumstances:
Sound Quality is Poor, or the amount of sound from the speakers needs improvement
Sound is quantity “LOW”*
Sound is absent AND you believe the absence is NOT due to hardware failure.** See note on iTunes.
NOTES:
* If your LOW sound issue is severe, it may ONLY respond to using the Loudness Equalization enhancement, in which case this procedure is not recommended for your use. The two are not compatible. See Part Two.
** If there is NO sound on your computer, it’s possible that completing this procedure may not result in any improvement. See Part Two.
Sound Controls – iTunes, Media Player
I would add to the emphasis on checking the volume on one’s iTunes setting. If iTunes volume is turned down, the notebook’s speakers will respond to that – turn up the volume in iTunes without adjusting the volume in the volume mixer and the sound on the notebook will not increase properly (or will suddenly jump). It’s a juggling act and one that must be taken into account when the sound is being reset.   Additionally, if you have other audio players on your computer – in addition to those mentioned in the post – be sure to check them for volume controls: it is important during a sound reset that all the sound players be in sync. If you miss this, you may not get your sound back.
Check for this mismatch in sound volume controls if you do not have sound or if you did have sound and, at some point you turned OFF your sound while watching a moving, a DVD, a something on HDMI controlled audio - and suddenly - you do not have any sound. Sound controls get tangled up. Sometimes you just have to unplug it, but you do have to check the controls.
Sample Rate and bit Depth
I do not use the suggested Sample Rate and bit depth of 24bit 96000 Hz. My system cannot tell the difference and defaults everything to 16bits – my recording equipment cannot discern the difference.   My ears lack sample rate sophistication.   I’ve left my dv7t Quad sound, Default Format (sample rate bit depth) at 16bit, 48000 Hz (DVD Quality). Sounds fine and it’s where most of my crummy recordings are set anyway. Don’t lose sleep over this one.
Where’s my Taskbar ICON?
A couple of HP forum posts have mentioned the loss of the beats audio icon from the Taskbar tray – the icon should restore itself if one can force the IDT driver to reinstall. Without the IDT driver, beats-audio is not going to work. Assuming the driver has installed and one can reach the beats-audio panel from the Control Panel, THEN it’s possible that for some weird reason the Taskbar icon didn’t reset. It might be possible to try and force a reload of the beats panel controller into the Taskbar. I think this is the file.
For a 64bit system:     C:\Program Files\IDT\WDM\sttray64.exe
The Original Post and Credits:
The original procedure and excerpts from that Post follow. Edits have been made to make it easy to read and to follow. The credits and original link are at the bottom of this page. My thanks go to JJ and JJ’s HP Envy15.
From the Original Post:
Originally Posted by bigcat400
I find the volume on this machine extremely low. Unless the room is totally quiet I can't hear a thing. Is this normal on this system, or could it be a driver issue? I am running the latest sound driver from HP's web site.
From JJ:
It took me awhile but I now have the sound level about 3x what it was to start with. Try these tweaks:
Sound Enhancement Procedure
Control Panel > Sound > Playback > (Highlight) Speakers and Headphones > Configure
New Window ‘speaker setup’ > Test (should hear sound L/R) > Next >
           UNCHECK ‘Front left and right’ (if checked) > Next > Finish
Sound > Playback > (Highlight) Speakers and Headphones > Properties >
            Enhancements > bass boost > settings > 80 Hz / boost 3db > Apply
             Tone Controls > Bass +1 Treble +3 > Apply
             Advanced > Default Format > 24 bit 96000Hz > Apply
NOTE:
After this DO NOT use the Beats control (Fn + B) or it will reset the tone controls.
HP dv7(t)
Taskbar > beats-audio panel
OR
Control Panel > Beats Audio Control Panel
        Listening Experience > Graphic Equalizer > Custom
        -1, +8, +10, +8, +9, +9, +9, +8, +9
Remember that these are suggestions – start here and re-adjust later as desired.
LEFT SIDE
Make sure Beats Audio is CHECKED
        Click the “Music” radio (round) button
        65, 65, 85, 65, 65
NOTE: The Left Side settings are somewhat arbitrary. The “Center” setting is higher – this provides the most sound and should be set higher at least initially for testing, especially if your system has sound issues.
The next section is partially excerpted from the original Post – Remember: JJ’s post was written for HP Envy15 – please adjust your results accordingly. Edits have been made for readability.
Control Panel > Beats Audio Control Panel
Playback > Speakers and headphones > Arrow above Speaker symbol and Select Small Speakers
Select Equalization> Select 'custom'>
Adjustments for this are mainly to boost the signal level in the preamp so we get higher volume while not distorting the sound from the tiny built in speakers.
My setting values are as follows: left to right;
-1, +8, +10, +8, +9, +9, +9, +8, +9, +10
MAKE SURE TO CLICK SAVE WHEN DONE!
Note: Do not crank up the Bass (31hz) control or it will overload the speakers which can't reproduce this anyway, you can even turn down more if you have distortion at high volume.
Check that the slide controls for 'master' and 'speaker symbol' are all the way up.
This should make a big difference in sound volume and quality, and there is one last way to get louder sound. Depending on what you use to play back your audio you can adjust the program’s sound settings or EQ controls also.
In iTunes the EQ has a 'preamp' slider which I boost to about +6, this increases the output level while leaving the EQ settings alone (make sure to check the turn EQ on box).
Windows media player: you have to raise all EQ levels equally (not too much) to boost without affecting sound quality.
In general it is not a good idea to use more than one EQ system in an audio signal or you get more distortion, so don't adjust the EQ curves or bass/treble on more than one device. I chose the Beats / IDT EQ to make the tonal adjustments because it is the audio driver program and preamp that outputs to the speakers, so it should have the best sound quality.
Any adjustments before the preamp that add distortion will just be amplified, so go easy on adjustments in your play back programs.
Finally, when you play your audio,
Sound > Open Volume Mixer >
Make sure to click the Sound logo in the Taskbar so the slider pops up>
Click ‘mixer’ then you should see all the sliders for your devices;
You can independently adjust the levels for the right mix.
If you open the Beats panel and minimize it then a mixer slider also shows for this and you can dial in the effect of the EQ settings.
Headphones:
One last thing; When listening to headphones you will need to increase the bass EQ setting (since headphones can reproduce the low frequencies) in the Beats panel or I just change the drop down selector to the one with a flat curve (beats studio I think) -- the volume for my headphones was not an issue so I defeat the EQ for better sound quality.
Whew. I Didn't think it was this complicated when I started typing....
Hope everyone enjoys better sound with this.
JJ
ENVY 15 l i5 540M l ATI 5830 GPU l 8GB DDR3 1333 l 2 x 160 GB SSD l 1920x1080 glossy l Win7 Pro l 10,273 3Dmark06   Last edited by JJB : 12-27-2009 at 03:41 PM.
End of Excerpted Post
Credit belongs to the original author of the original procedure:
JJB from HP beats-audio / Sound Reset Procedure
Part Two
Loudness Equalization – and the LOW Sound Result
I was testing the system sound… CD playing in the background: Sting “If on a Winter’s Night” 02 Soul Cake playing through iTunes – standard speakers-headphones (beats-audio coasting along).
Sounds -> Playback Devices -> Speakers and Headphones -> Properties -> Enhancements
I have rewritten this part three times trying to get it right. Here’s the gist:
I switched on the “Loudness Equalization” enhancement. The sound jumped; it was loud and distorted. I switched the enhancement off – the sound dropped off and didn’t come back. I turned up the volume (with the slider) and down and up and down – and I was hearing Less and less sound from the speakers: “Low Sound Syndrome”: I was hearing what would be expected at setting of 7%. Well, that sucks. (Technical term.)
Based on this experience, I hypothesize that it’s possible to lose one’s sound entirely just by initially adjusting this one enhancement and then losing control over the ensuing ever diminishing returns. I didn’t continue to test this into a theory. It’s a hypothesis. If I had an extra dv7 sitting around, I might sacrifice it on such testing. I gave up right away and went into recovery mode while I still had some sound.
Recovery:
After the Loudness Equalization was turned off,
Recovery Attempts to recover normal sound levels included:
Resetting all Sound to Default settings,
Installing the driver from the webpage (standard load – download, double-click and install), reboot,
“Hard Reset”.
It was finally necessary to force load the IDT HD driver to recover the sound to its normal levels; that is, the driver was Uninstalled and allowed to reinstall at boot. (“Local” install from the Device Manager also works.)
Commentary:
I did not bother with a registry cleaning at this point - it may have made a difference, though it's unlikely since the driver needed to be completely reset by this time. I advocate registry cleaning! Bad things happen to good computers because of a dirty registry. Use your favorite or download CCleaner (free).
Try a Driver Update:
You can always check for Driver updates here – If the driver does update - you may be done with this part. Check the sound and proceed to "Enhancements".
At the Right-Click > Update Driver Software
Audio Driver “Uninstall”
Control Panel -> Device Manager -> Sound, video and game controllers
          Right-Click IDT High Definition Audio CODEC -> Uninstall
You have a choice at this point
If you do not have the means to replace your driver,
THEN do not delete your driver from the computer
OR - If you believe the driver is not working at all,
And / Or you have tried the standard Uninstall/self-install method previously without results,
AND You have the means to REINSTALL that driver from scratch*
Then you may delete the driver -
*Driver Installation From Scratch Requires the following:
You have your IDT HD driver on your computer as a sp*.exe file, for example, in Downloads
Reinstall with Boot:
Shut down the system
Reboot
The driver may install itself at login as the system scans for hardware changes
OR
Reinstall WITHOUT BOOT - Initiate the scan for hardware changes:
Right-Click on the IDT driver , > "Scan for Hardware Changes"
--> Check your sound at this point. It's possible that the driver has in reinstalled itself.
Manual Driver Installation - Comments:
There are a couple of paths used to get the IDT driver onto your system. You can download it from your HP Software and Driver website. You may have been given the path to your IDT driver at the HP ftp softpaq site. The package is downloaded as a sp*.exe file.   You may download the software as often as you need it. Make sure you have the package downloaded before you delete your driver.
Once you have downloaded that package onto your system, the original sp* file will stay intact. As long as you do not delete it, you can reuse it. Once you do install the driver onto your system, an installation directory is created in C:\SWSetup, named the same as the sp* file (without the .exe extension).
In C:\SWSetup\sp* are all the files necessary to reinstall your driver. If you install the software from the sp*.exe file in your Downloads folder, the new installation will ask you whether to overwrite the data in the SWSetup/sp* with the contents of the .exe package – do it. The reinstallation is just unwrapping and redistributing what’s in the .exe file into the same SWSetup/sp folder.
If the "Driver Store" is removed, that is, if the driver package is ever removed from C:\SWSetup, you can reinstall from the sp* file as long you you have it in your Downloads folder - it will recreate that SWSetup/sp* folder.
What about Versions?
Latest is Usually best. If you are concerned AND you think you may not be able to get another a copy of an older driver that is in C:\SWSetup\sp*, make a copy of the folder before uninstalling any driver or making any changes.
Installation from the Original sp* package
Find the sp* file on your system. It will be most likely be located in your “Downloads” folder.
Simple Driver Installation from the 'Saved' installation sp* file:
Close everything that isn’t needed, browsers, games, windows…
Right-Click on the installation package (the sp* file), Select 'Run as Administrator' and start the installation
Answer any questions…and follow the instructions
or...
Installation from the Device Manager
If the driver software is still on the system from a previous installation, it is located in C:\SWSetup
You can tell the Device Manager to access the package on the system:
Control Panel > icons > Device Manager > (Highlight) IDT High Definition Audio CODEC >
                      Right-Click > Update Driver Software > Browse my computer for driver software
                      Browse to C:\SWSetup\sp*
                      Be sure the “Include Subfolders” box is CHECKED
27-Nov-2011
Audio Services Check / Restart
This section is not strictly part of the "Enhancement" procedure. It has been included because it is necessary that these settings be correct so that the sound can function properly. If you are not having sound issues, skip this part...
Check system Services to make sure that your sound related services are running as they should.
Restart each service (except as noted): Right-Click > Restart
Control Panel -> icon -> Administrative Tools -> Services > bottom of page > Standard (optional - makes it easier to column sizes)
Sound services must be showing as
Status = Started
Startup Type = Automatic
Sound Services:
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
Power (check only)
RPC (check only)
That’s it.
It’s a matter of tweaking the settings to get results. Do not forget that that Left/Right Speakers setting is turned off in Speakers Configure. It’s not a big deal (assuming this works), but it’s DIFFERENT and it needs to be kept track of.
I hope this helps your sound work better!
Kudos are Earned!
Kind Regards,
Dragon-Fur

Nice extensive research on reseting Beats Audio on the HP laptops.
Just bought the Envy 17t-3000 and I updated all the drivers via HP Support Manager.
BEFORE the update, the Beats Audio worked well..
1. Press the dial and the popup box comes up ~3 secs
2. Volume indicator swirl appeared to show volume level
AFTER the update, something changed the Beats Audio... had to re-install the latest driver from HP website (even after contacting HP Tech support via chat and email several times)...
1. Press the dial and the popup box comes up ~10-12 secs now!
2. Volume indicator swirl DISAPPEARED so volume level indicator is GONE
Sure the sound works but NOW I do NOT know or remember the volume level whenever I listen to music.
You can barely tell on the Windows Speaker icon on Icon bar since 2 sound waves indicate at least 50% sound level but that's it!
I have the following softwares and checked their settings and set them all at 50% and use the Beats Audio dial to control the volume whenever the programs are used:
1. WinAmp
2. VLC player
3. MPC
4. WMP
No matter what I try, it appears that the Beats Audio Volume Control Swirl Indicator is GONE! Worse, there's NO Windows volume control indicator unless leave the Volume Mixer open!
Anyone know how to fix this problem and bring Back the Audio Beats volume indicator??
Thanks!

Binaural beat audio made in Logic Pro doesn't sync

Now, I'm confused!...
I've created a meditation exercise in Logic Pro with a binaural tone. (A 110 hz sine wave in the left channel, and 120 hz tone in the right...producing a binaural beat)
It plays perfectly on the laptop, even if I try to create that tone on other software (Sound Studio, Gnaural..) and save as .aif, or .wav.
When I move this to the iPhone, or iPod, via sync, air sharing, or email attachment, the binaural beat is gone, and the device seems to choose one tone, and put it in both ears.
Is there some 'feature' of the iPhone/iPod that somehow manipulates these binaural tones, or makes them mono? There are apps that produce these binaural beats just fine, and I've unzipped them, and THAT audio plays perfectly on the laptop and phone.
Confusing.
Why would the apps that feature binaural beat audio work AOK on the iPhone and laptop, but produced content that includes these tones not reproduce properly on the iPhone?
Any help is SUPER appreciated

Or I'm just a complete idiot. There is a page in the RM that says that when an audio file is dragged and dropped into the arrangement, it creates a small pointer region but doesn't show the entire waveform of the audio. How am I supposed to edit the audio that I've imported if I cannot see the rest of the region which would normally have been there if I had recorded directly to the track?
Is there a way to expand the region's view to match the length of the audio file?

Hp Pavilion dv6-6c35dx Windows 7 beats audio problems

Product name : Hp Pavilion dv6-6c35dx
Operating System : Windows 7 Home Premium Service Pack 1 64 Bit
I'm having a problem with some of the sliders in my beats audio options. The sliders in the graphic equalizer section work just fine, but the ones to the left of it - bass, treble, center, etc - have no effect on the sound no matter how I adjust them. Below is a picture of what I'm talking about. This problem seemed to happen shortly after I needed to reset my pc back to factory settings. I've gone to the drivers section of the hp website and got the HD IDT audio driver for my model called "sp58131" and installed it but all it did was reset the sliders, the problem still persists. Is there anything else I can do?

Hi Vivi,
I understand you are having issues with your HP Pavilion dv6-6c35dx Notebook and Beats Audio. I would uninstall the driver from the device manager and any others that might be in the Audio. Then reinstall it from here.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

HP Pavilion m6-1035dx, product B5S06UA#ABA
Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

I suspect this may all be related to a common cause.
When updating the windows experience index, what is the error message you receive?
Has the video card driver been installed? It is necessary for the windows experience index to complete.
Also, ensure the HP Software Framework is installed. It is under the Software Solutions category.
You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Beats Audio completely vanished from my HP Envy 6 1010ea

I recently updated my ultrabook and the beats audio control panel completely vanished!
It was working fine before the updates (of which were 'recommended by HP')...
I can still switch the beats function on and off using fn+b but when I go to open the beats audio control it says start up file not found....
Any help?
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56717.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp envy ultrabook 6-1209 tx beats audio problme

hi,
i have hp envy ultrabook 6-1209txwith a windows 7 operating system it has beats audio ...and every time i restart the laptop the audio in icon seems to be working fine but in fact there wont be any audio so i would have to uninstall , restart and install again its original driver that comes with the laptop specs meanwhile on every restart after unistallation it installs defalut high defination audio itself...what can i do ?? i installed fresh driver from Software & driver downloads HP ENVY 6-1209tx Ultrabook | HP® Support but it still gives me same problem.on every restart it disappears.even when tried other sources for IDT driver.please help me.
i tried
Troubleshooting Guide: Audio does not Work after a Certain Period of Time
and it worked fine...but i guess it is temporary...so if any one will let me know that the windows update KB2962407 is same for windows 7 ??? because i dont see it on installed or update list.
please help me.
This question was solved.
View Solution.

Hi @maryamis ,
I see that you found the work around and it does resolve the issue until you restart your notebook.
First I would delete the driver not just uninstalling it. If you uninstall the driver it remains in the system so when you restart Windows will automatically locate and reinstall it. If you delete the driver it is no longer available for Windows to install on a restart.
To prevent Windows from updating the driver again you will most likely need to change your update settings, if you have ti set to automaticall install all updates. To do this,
Go to the control panel
Select System and Security
Under Windows updates click turn auto updates on or off
Select Download updates but let me choose whether to install them
Click OK and exit.
You will need to periodically manually check to see if this issue has been resolved.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP ENVY Ultrabook 4 Beats Audio is glitchy

On my HP Envy TS Sleekbook 4, using Windows 8, the built in beats audio speakers are always making this glitchy noise. Whenever I play songs, videos, or anything that requires sound, it makes this like skipping glitchy noise. They are supposed to be good speakers why is this happening? What can I do to stop this?

Hi shelbysmall,
Let's start with uninstalling and reinstalling the audio drivers. The link below will show you how to uninstall a device driver. You will need to scroll down to the Uninstall a Driver.
http://www.pcworld.com/article/246041/how_to_uninstall_drivers_in_windows.html
This second link for the IDT High-Definition Audio Drivers for Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114910-1&cc=us&dlc=en&lc=en...=
Try that and let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Beats Audio Driver for 4-1130us ultrabook

Hello,
Recentel installed Win 7 on my notebook.
I seem to have lost the Beats Audio driver and cannot locate it under the drivers...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=ca&dlc=en&sw_lang=&product=5318...
Can someone please help me?
Also the light above my Mute button (fn F11) does not work either.
thanks in advance
John
This question was solved.
View Solution.

Hi, John:
See if this audio driver works.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
You may need to install the quick launch software for the other issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en...

Beats Audio Software and On Screen Volume and Brightness Icons Not Showing

Hi,
I have a HP Envy 6 Ultrabook 6-1010ea, It had to have a new hard drive due to hardware failure and now I have it back I can't find the beats audio symbol and the associated software, also the on screen displays of the volume control and broightness icons don't appear anymore, when I download certain drivers to solve the issues each one doesn't see, to work with the other, I can get sound back on the internet OR the icons back.
If you could help I'd be very greatful, thanks.

Hi:
You should be able to use this audio driver for the Beats audio.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
This software should restore the on screen display of the brightness and audio levels.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106851-1&cc=us&dlc=en&lc=en...

Beats audio gone? HELP!!!

Similar Messages

Maybe you are looking for