Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

my pavilion dv7 used to show a display when i changed volume. it no longer shows up. volume works fine. i can open beats audio just fine.

Hi,
Try using Recovery Manager to reinstall HP Quick Launch Buttons - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

I found a solution!! so go into your settings - where it says "use side switch to:" click mute instead of lock rotation. Seems that somehow it was locked on mute (eventhough my buttons were showing me turning volume up and down) now its all working perfec

i found a solution!! so go into your settings - where it says "use side switch to:" click mute instead of lock rotation. Seems that somehow it was locked on mute (eventhough my buttons were showing me turning volume up and down) now its all working perfect!!!
THIS WORKED FOR ME> IT WORKED I MADE A HOME HD VIDEO AND IT CAME OUT GREAT AND PLAYS ON SPEAKER USING THIS SOLUTION> VIDEO IS CRISP AND CLEAN< AS WELL

WORKED LIKE A CHARM THANKS

HT201401 I am so frustrated!!!! My iphone 4s will no longer show caller id when a call is waiting, and it won't answer the call either. I need to disconnect from first call and wait for call to come through without knowing id. Help!!! I see no solutions

My iphone 4s will not answer call waiting. When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it! Caller id does not show up during an existing call and the call waiting cannot be ansered. Can anyone help???

My iphone 4s will not answer call waiting. When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it! Caller id does not show up during an existing call and the call waiting cannot be ansered. Can anyone help???

HT4623 my phone no longer shows as conected when i turn on i tunes on the desktop what can i do to fix i can no longer update

before i would just plug the phone into the desktop and it automaticaly conected i could add music and photos from the computor, now it seems to conect because it updates anything i have added thru the apple store while not conected but not fome the computer maybe i turned somthing off ?

Hi there howard124,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

HT1414 My ipod touch shows white screen when i turn on. And, it does not register in my computer.

My Ipod touch don't start up as usual. It doesn't register to my PC. It shows white screen and some time other colors like green and blue. I trying restarting, but that did not work. I cannot restore the IOS because my Ipod touch doesn't even shows up in my Computer.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Beats audio no longer works

My beats audio no longer works. When I try to open beats audio control panel up, it says the cannot find startup file.! I am not sure what happend. I think it may have to do with something related to my webcam b/c the webcam no longer works, and the program you cam does not open up. My laptop is dv76b55dx.This my info: A1T53UA#ABA - Product number, If you can help me, I really appreciate it! Thanks
[s/n removed for privacy]

Hi,
As there is more than 1 IDT entry in Recovery Manager, cancel this and use the following method instead.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Cinema HD Display no longer comes on immediatley when G5 turned on

My 23" Cinema HD display no longer comes on immediately when I turn my computer on. The screen stays blank for a few minutes, until I press a button on the keyboard. When the screen finally comes on, the set up for a blue tooth keyboard is displayed. I have the keyboard plugged into the monitor. It has been working fine for the past 8 months. Has anyone seen this before? Do I have to schlep this whole thing to the Apple store for repair?
G5 Mac OS X (10.4.8)

How do you resolve this? I have the same issue. No power when usb is plugged in. Replaced power adaptor and it didn't help. Just blank screen. Seems like these monitors should hold up better then this.

Display prefs showing extra display when none are connected

I have a MacBook Pro and when I go to the display preferences it shows another display when no monitor is connected. I have searched the web extensively for a fix and haven't found anyone with the same problem. I'd prefer to just delete some obscure system file within OS X rather than reinstalling the whole OS just to fix the problem.
Anyone know of an easy way to get rid of the mysterious extra display?
Thanks,
Adam

I've just been reading this in the hope that my problem will be solved but realised that my problem is similar almost in reverse!
I have a Pioneer tv which I connected to my MBP several months ago using the MPB>mini DVI>DVI>HDMI cable route ... and all worked fine.
Today, when I connect the same items no luck. The only thing that happens is a brief flash of solid blue screen on MBP. I've tried all the resolution change tricks etc and no luck ... but here is the weird bit:
Even though I cannot get it to work, my MBP always shows "Gather Displays" as an option ... even when no display/cable connected ... if you click the ? button it suggests this button should only be available when more than one display is connected. Clicking it (or Detect Displays) does nothing.
So, my MBP seems convinced I have another display connected but won't let me see or use it. I don't even have the Arrangement tabs etc.
Any ideas?
Thanks in advance for any ideas!!

MBP (early 08) shows VGA display when nothing plugged in

My macbook pro early 2008 shows VGA display when there is nothing plugged in. It performs just like there is an actual display plugged into it. I have run AHT and it tells me nothing is wrong. I have reset pram. I deleted all the prefs that relate to the video prefs. It actually works when i do plug a DVI-> VGA Adaptor, but when i plug the DVI-> Video adaptor in only the s-video works. Composite video ends up with out any luminance. My best idea is there is a pin jammed in there from one of the video adaptors, and it's somehow telling the system that there is an adaptor plugged in, but I'm open to trying anything right now. This computer was purchased 3 years and 1 month ago, so it's just out of apple care.

well it is a hardware issue, at least it has nothing to do with OSX. I did recently delete my bootcamp partition, and I know the windows version of the nvidea driver has a bit more control over things, I'm wondering if I should reinstall bootcamp to see if it is something in the Video Card's rom that Windows changed. I read that somewhere in a post on this board somewhere someone was able to easily change this problem in that driver.... why do you think AHT wouldn't catch the issue?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

My phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

my phone 4 some time music player sound coming and volume up and down not show screen .then some time sound coming.. why

Hello @voicewizard,
I understand that you are having audio issues with your audio having to ramp up before it hits the normal output range. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are numerous HP ENVY 810 All-In-One Desktop PC variations. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

When i turn imac off and on again nothing is saved-Documents, iTunes etc

when i turn imac off and on again nothing is saved-Documents, itunes, downloads etc

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

Similar Messages

Maybe you are looking for