Beats audio no longer works

My beats audio no longer works. When I try to open beats audio control panel up, it says the cannot find startup file.! I am not sure what happend. I think it may have to do with something related to my webcam b/c the webcam no longer works, and the program you cam does not open up. My laptop is dv76b55dx.This my info: A1T53UA#ABA - Product number, If you can help me, I really appreciate it! Thanks
[s/n removed for privacy]

Hi,
As there is more than 1 IDT entry in Recovery Manager, cancel this and use the following method instead.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Upgraded to Windows 10 - Sub Woofer/Beats Audio No Longer Working

Hi, Just upgraded from Windows 8.1 to 10. All seems to work fine except I no longer get sound out of my sub woofer and Beats Audio adjustments have no impact on sound. I am using the IDT High Definition Audio Codec driver. I thought I did something wrong so I reverted back to 8.1 and everything was working properly. Ran the Windows 10 upgrade again with the same results, Sub Woofer and Beats Audio not working. The On Board speakers work fine. I also did some exploring on various forums and sound issues seem to be a common problem with Windows 10. I also tried the High Defintion Audio driver and that just caused additional issues, i.e. Beats Audio and the Sub Woofer disappeared from my system. Hoping someone has found a solution. Thanks!

go to search, type "update driver manager"go to sound, "video and game controllers"right click "IDT High Definition Audio CODEC" or whatever is the audio title is.Go to Properties.go to drivers and click update driverClick browse my computer for driver softwarethen click "let me pick from a list of device..."then what i did here, is first clicked "high definition audio device"and then after that i restartedafter, the audio wasn't sounding like it use to so i redid everything from above but rather than picking "High definition Audio Device", I picked the latest "IDT High Definition Audio Codec". So far, my audio is fine and never had a problem since. Any other questions, just reply goodluck.

Audio no longer working after upgrade

Hi,
After doing an upgrade this morning, my audio no longer works.
Booting into KDEmod gave the first clue when I got an error message saying audio not found.
The output of alsamixer say "alsamixer: function snd_ctl_open failed for default: No such device", yet my modules have not changed in rc.conf.
Could this be related to HAL also being updated?
Thanks,
JTD

Do you by accident have more than one sound-device? I didn't lose sound but "aplay -l" showed that ALSA has changed the order of the cards. Hence I suddenly didn't get sound from where I expected it.

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Audio no longer works with external display

Before Yosemite, I could plug my computer to a HDTV through a HDMI cable, and then hook up my audio to a stereo, so I could watch TV shows. After upgrading to Yosemite, my audio no longer work when connected to a HDTV. Any help?

OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

Beats audio is not working

I updated the operating system to Windows 8.1 and at now Beats Audio is not working. What should i do? My notebook is HP Envy 6-1101er.

i may be able to help you if you give me your laptops full name and product number

5.1 audio no longer works on Netflix and HBO Go

I've noticed recently that 5.1 audio no longer works on Netflix and HBO Go. Those are the only apps I really use, so I can't speak for any others. My receiver lights up all of the speaker lights that it normally would for 5.1 audio, but it displays "Stereo" and I'm only getting stereo sound from my speakers for anything I play from those sources. The receiver works as it is supposed to for all of my other A/V devices. I tried restarting and restoring, but the problem remains. I can't think of anything else to do.

@sean0826 -- this is why you don't use Java menus. Even javascript menus are a bad idea; you need to have a secondary menu system ANYTIME you have a menu system that requires a plugin or scripting to be active. NOT EVERYONE browses with that stuff on.
The only thing you can do for now is FTP to your site and add in static menus (like we did in the "old days" at the bottom of the page; or rip out the Java Menus and install static or CSS versions.
BTW where are you rmenus supposed to be. I have opera, safari, ff, and a few others. they all look the same. So if that's true, it's the plugin that's the problem, not safari.
In Opera Pogo.com works. java loads, the game is there. It does have some drawing issues but not surprised.
In Safair Pogo works fine. Just played a game of chess.

HP Pavilion DV6 Beats Audio speakers stopped working

the speakers on my HP Pavilion DV6 Beats Audio laptop stopped working and there is absolutely no sound coming out from it. Please help!
This question was solved.
View Solution.

Get your full Model number or Product number from the Service Tag attached to bottom of laptop (probably under battery)
How Do I Find My Model Number or Product Number
Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select your Operating System, click Next. A list will populate with drivers/software.
Download & Save the latest Audio driver.Go into Control Panel,Programs & Features -Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
If still no sound,try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

my pavilion dv7 used to show a display when i changed volume. it no longer shows up. volume works fine. i can open beats audio just fine.

Hi,
Try using Recovery Manager to reinstall HP Quick Launch Buttons - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats audio controls not working

Using my beats headphones this morning with my MacBook Air and iTunes. Everything is up to date. Although today now the audio controls on the cord won't work. Normally I can pause iTunes or control the volume. I do this multiple times a day but no go today.
Is this another 10.10.2 bug? Illustrator 2014 CC no longer works properly with my external monitor. I'm getting frustrated with all these bugs.
Also, in my 'About This Mac' info window, it shows my OS as "135122" instead of "Mac OS X" - I'm sure that's not normal.
Any thoughts, anyone?

I did a reboot and repaired permissions, which solved the beats headphones controls not working.
Still concerned about the Mac OS version display though. Curious to know if anyone else has that as well.

Beats audio program not work

hi i have a HP Pavilion dv6-6c20ed Entertainment Notebook it a very nice thing but i have a question
the beat program dos not work i have a beats headset but if i want to trun the bass to high its not work
can you please help me?

Hi,
Try using Recovery Manager to reinstall your original IDT HD Audio driver ( this will also reinstall the Beats gui ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv6 beats audio softwarr not working :{

ello govnor!
when i got my hp i was messing around with the beats volume and listening experience thing to personlize my sound and if i rememeber right it closed on me? now when i want to change it it wont even let me use that part of it and when i turn the volume up the beats symbol is replaced with a speaker symbol.. this isnt that big of a deal. but i make my own dubstep and i wana make sure im getting full quality of sound from this hp, considering thats why i bought it. any help or sugestions or if you dont understand just askk thanks!

And if this helps it doesnt show up by where the batery life is and wifi conection and volume bar is any more where it used to be. and when i bring it up and when i mess with the advanced settings of the beats aduio pannel it says IDT PC audio has stopped working... any help thanks!

HP Beats Audio EQ not working after Windows 10 update

Hi, I have an Envy 17t-j000 Quad Edition with Beats. After the Windows 10 upgrade, I have noticed that the Beats Audio EQ is not working. The left panel is working fine, but the right panel with the red sliders is not working. I move the sliders up and down, but nothing happens. Can you please help me fix this?

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

Microphone / Audio no longer works on my HP Pavilion DV7 Notebook PC

My microphone no longer works on my system. Everything appears ok. Got a message in the action center that says:
AMD/ATI Video Driver has stopped working properly. Help, I need to record some videos. Thanks
Rob

Hello rob4kelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that the microphone no longer works on your notebook, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your notebook computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
In the meantime, I recommend following this document on Using System File Checker to Restore System Files. This should help repair damaged protected files on your computer. In addition, I also suggest following this resource on Resolving Microphone and Line-in Problems (Windows 7).
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

ITunes 11.02 update - video and audio no longer working

I updated to iTunes 11.02 last night.
Now, I can't play any video or any audio files, whether using iTunes or Quicktime. Even online Vimeo and YouTube content won't play. Clicking the play button does nothing - the movie or song's progress indicator doesn't move.
In Sytem Preferences > Sound: I get the following message for input and output devices "No input device found" and "No output device found"
There doesn't seem to be a way to check if the graphics card is recognised but it's still showing up in the system profiler.
Looks like the iTunes update has completely nixed my laptop's video and audio capabilities. Does anyone have any recommendations?

I do a lot of SONY HRD FX1 native 1080i HDV capture with Final Cut Pro 5 on my PowerBook 1.3 GHz G4..
Before Apple started supporting HDV, getting the audio and video lined up was such a nightmare that it wasn't even worth working on projects.
My material works great inside FCP 5, but I have had similar problems to what you describe when making the DVDs
However, I use DVD Studio Pro and was able to move the audio relative to the video slightly to get the most important parts to line up. However if your audio and video clips aren't the same length then you will have variable slippage for long clips.
I have been using MPEG Power Professional (Heuris Inc) to do my MPEG2 video encodes as well as my audio encodes and I haven't had the problem lately.

Beats audio no longer works

Similar Messages

Maybe you are looking for