Beats audio software missing after I installed windows 8.1

 Beats audio software missing after I installed windows 8.1 
my laptop: HP pavilion p011sv 

Hi @Boukou ,
Thank you for your  inquiry.
I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
This should reinstall your Beats software.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Beats audio Panel Missing after upgrading to Windows 8.1 and installing HP Reccomended Drivers

    I recently upgraded to Windows 8.1 on my HP Envy H8-1450. The Beats audio Panel Disappeared and only shows IDT.
    I uninstalled and re-installed the HP reccomended audio drivers several times....no luck.The sound does not sound as it did under Windows 8...actually it is crapy.
    Please help.....Thanks.

    lacadan,
    Did you reboot your PC after installing the IDT codec in Device Manager?
    I have upgraded from Win 8 to Win 8.1, have the same driver (6.10.6491.0) as you, and also have a fully functioning Beats Audio Control Panel in Control Panel.
    When initially removing the incorrect Beats audio codec in Device Manager you should also check completely remove the drivers from your system, reboot, and Win 8.1 should install the correct version of Beats. You then have to reboot your PC again to complete the installation of Beats.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    16 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • Core Audio Components Missing After Clean Install and Update to 10.3.9?

    I did a clean install of 10.3.x onto my hard disk and then updated to 10.3.9 through Software Update.
    Before this install I'd been running 10.3.9 (my disk crashed -- or so I thought -- hence the re-install of all above). I'd been running a music recording program and taking advantage of Apple's Core Audio AU components (e.g. AUDelay, etc), which should be in /Library/Audio/Plug-ins/Components/ or something like that. Now they are missing entirely.
    How do I get them back? Where are they to find?
    Thanks!

    It was a problem with the 3rd party software -- I hadn't run the installation update to interface with the AU Components -- after the reinstall. Thanks.

  • Not able to see Beat Audio software and mute light not glowing on fresh windows 8

    Hi, 
    I am using Laptop : HP ENVY 4 1046tx. I have installed fresh windows 8 on it. After that I have downloaded audio software from HP software site but that driver is not accepting. 
    1. I am not able to see Beat Audio software and equalizer setting in control pannel.
    2. When I am pressing mute button mute light (red light) is not glowing on button
    Thanks,
    Prabhat
    This question was solved.
    View Solution.

    Try the IDT Audio driver here:
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp5863​5.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Beats audio quit working after updating driver

    beats audio quit working after updating driver. Updated IDt driver and now now soundd. how to fix?

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

    After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

    Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

  • Beats Audio Driver missing on HP Pavilion 13 x360 a110dx

    I recently installed a SSD in my laptop and downloaded all drivers from HP. When I installed the Realtek HD Audio driver from the support page, the beats audio software did not install with it. Where can I get the beats audio driver for my laptop? Also, I do not want to have to use the recovery partition on the old hard drive (also I should not be forced to do so as that is an insult to any HP customer). 

    Hello? The issue is not solved and would appreciate a HP representative to answer my question. Thanks.

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • How can I set to boot from MAC OS by default after I installed Windows?

    How can I choose to boot from MAC OS by default after I installed Windows? I have a MacBook Pro Leo 10.6.8. I used bootcamp to install Windows XP SP2, but now if I don't press the option key it will start up with Windows, and I don't want that. Thanks for any help.

    Select it in the Startup Disk pane of System Preferences.
    (61137)

  • HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    Yes, purchase Paragon Camp Tune for the job.

  • Mac OS X Leopard installation disc after I install Windows Vista

    Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!

    Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!
    Yes you will need to install the apple drivers for win vista. When you boot from a cold start, have you tried holding down the option key to choose which OS to boot from? If you have then, you could try going into startup options from the mac side and choose win vista if it appears. That could be risky though, as you mentioned you do not have the mac install disk. If problems arise you may need the mac install disk to undo the changes.

  • B&O Equalizer Software missing after the upgrade to windows 10

    After the upgrade to windows 10, the pre installed B&O Equalizer software is missing. Besides after i installed the audio driver provided by Hp Support , the sound quality and the level are degraded.
    I am unable to find the software. Help

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-ab029tx Notebook and issues with Bang & Olufsen Equalizer Software. Try using the Windows Update Troubleshooting tool to fix the problem.Here is a document that shows how to update drivers that are not working correctly with Windows 10.I hope this helps. Thanks.

  • I.R.I.S OCR software missing after OJ 6500 e709n install

    Hi,
    I've just installed my OJ 6500 e709n and would like to scan  some text.  The documentation refers to importing scanned text with OCR software.  During the install there was a pop up indicating that I.R.I.S. software was being installed, although a search of the help files doesn't show any references to I.R.I.S.  Google searches indicate that the I.R.I.S. software should be started seperately and used to trigger the scan, but there are no icons on the desktop, in the start center, or in c:/programs.
    How do I proceed?  Do I need to delete and reinstall?
    Thanks,
    Russ

    Hey there.
    Is this what you are looking for? OCR Application
    Take care,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • H8-1287 Beats Audio controls do not work in Windows 8.1

    I've upgraded to Windows 8.1 and installed the IDT High-Definition audio driver from HP's website.  The surround sounds seems to be working but the controls do not work to modify the EQ etc.  I've seen the problem has been resolved for Envy laptops but all the links for the software appear to only be for the notebooks and not compatible with my desktop system.  I've downloaded the available software (IDT High-Definition Audio driver) found under my HPE HI-1287 product from HP's support site but the Beats audio control panel doesn't seem to make any sound quality changes.  Hopefully there is a driver somewhere compatible with my desktop system that allows controling the audio properly.  Thanks.

    Hello @KICR,
    I understand that the Beats Audio Console is not adjusting the audio settings on your HP Pavilion HPE h8-1287c Desktop PC running Windows 8.1. According to the HP Pavilion HPE h8-1287c Desktop PC Drivers page there are no Windows 8.1 drivers for your computer. I can only assume that this means your computer is currently using Windows default drivers or Windows 8 drivers and the Beats Audio Console is not able to interact properly with the currently installed driver.
    All I can recommend is that you check back periodically to the drivers page I linked above and see if Windows 8.1 drivers have been created. Other than that your only option at this time would be to use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to Windows 8 where the Beats Audio Console has drivers that are compatible.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Hardware missing after win7 install

    The following is the information about my Laptop:
    OS Name            :    Microsoft Windows 7 Ultimate
    Version            :    6.1.7600 Build 7600
    Other OS Description    :     Not Available
    OS Manufacturer        :    Microsoft Corporation
    System Name        :    USER-PC
    System Manufacturer    :    Hewlett-Packard
    System Model        :    Compaq Presario V3780TU
    System Type        :    X86-based PC
    Processor        :    Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz, 1833 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date    :    Phoenix F.2A, 25-03-2008
    SMBIOS Version        :    2.4
    I initially had vista, but the laptop got dead slow and unresponsive, used to show BSOD (blue screen of death) often, used to restart and got heated beyong measure. So I switched over to win7. However, after the install, i found the following unknown devices  on my computer.
    PCI bus 8, device 9, function 3:
    PCI\VEN_1180&DEV_0592&SUBSYS_30CD103C&REV_12
    PCI\VEN_1180&DEV_0592&SUBSYS_30CD103C
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    (Ricoh Memory Stick Controller)
    PCI bus 8, device 9, function 2
    PCI\VEN_1180&DEV_0843&SUBSYS_30CD103C&REV_12
    PCI\VEN_1180&DEV_0843&SUBSYS_30CD103C
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    (Ricoh SD/Host Controller)
    PCI bus 8, device 9, function 4
    PCI\VEN_1180&DEV_0852&SUBSYS_30CD103C&REV_12
    PCI\VEN_1180&DEV_0852&SUBSYS_30CD103C
    PCI\VEN_1180&DEV_0852&CC_088000
    PCI\VEN_1180&DEV_0852&CC_0880
    (Ricoh xD-Picture Card Controller or Ricoh xD-Picture Card Host Controller;0852h xd picture card controller)
    unknown device on Microsoft ACPI-Compliant System
    ACPI\HPQ0007
    *HPQ0007
    (most probably quick launch buttons driver, though not sure)
    With win7, my lappy runs smoothly but the problem somehow is not completely over as sometimes the boot fails, esp if I install any new software; maybe missing drivers are causing problems. If any of you happen to know where I could find their respective drives suited (as to my system), please let me know! I looked, but was not quite that confident so i asked. Kindly help.
    Thanks

    Hi:
    Should be no problem to install the Vista drivers for the 1180 devices:
    The 1180's are your missing card reader drivers:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-54958-1&cc=us&dlc=en&lc=en&​...=
    The ACPI is probably your QLB like you suspected but, you need to run the Windows 7 version of the QLB's.
    Try these off a HP 6910p business notebook: I am giving you the link to the oldest version of W7 drivers for them.
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareDescription.jsp?lang=en&cc=us&prodTypeId=32​...
    Paul

Maybe you are looking for

  • GP Action ID does not exist error in web service

    Hi Experts, I am testing "Complete GP Action" web service. Firstly, I start a process in GP Runtime and I can get processID and taskID from NWA->Monitoring->GP. Then I use WSNavigator to test action wsdl from "http://<host>:<port>/gpcore/GPExecuteAct

  • What is the part number for labview fds cd media only

    what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

  • IPhoto '08 - Moving/merging events causes photos to be lost

    Hello, I'm trying to move my photos from Picasa to my iMac. I have around 20,000 photos and movies organized into folders on my old PC. I am able to import the pictures to iPhoto but when I try to re-organize events (move some photos from one event t

  • 100501: non-ORACLE exception -100501

    haii iam using forms 6i for development, while i try to validate one field checking the condition if null then go to that field and raise form_trigger_failure. becasuse of raise form_trigger_failure , i think i got this message. any idea to handle it

  • Multiple select

    Hi, I have a requirement to select multiple states. I worked on one of Oracle's examples of integrating invoice.rdf report with Oracle HTML DB. How do I accommodate multiple state selection into this sample report? I mean, how can I let the report kn