Beats earbud volume control on iPhone 5 not working

I have a pair of the Beats URBEATS ear buds. When I use them with my iPhone the volume controls do not work on the headphones not can I answer calls or skip songs. Anyone else having this problem and how do I fix it ?

I have the same problem with a first gen 8 gb touch running 2.1 software.
I've seen other threads referencing this problem but no real solutions. I've tried reseting the iPod (press/hold sleep/wake + Home buttons,) restoring via iTunes and adjusting the volume limit control with no success.
Is there anyone out there that can help us?
I was given the iPod touch as a gift and updated the software to 2.1 right out of the box via iTunes. How can a restore to the previous 1.x version? This seems like the only solution at this point.
Thanks

Similar Messages

Dv7t-3300 volume control slider bar not working

I have a dv7t-3300 and all of a sudden the volume control slider has stopped working. It's stuck displaying mute although the computer itself does have sound. I tried performing a cold reset as some people on line have suggested to no avail. Is there any possible resetting that can fix it?

Hi gnobel,
Welcome to the HP Forums! I understand that your volume button is stuck and will not slide. I will try my best to help you with this issue. I suggest Performing a Hard Reset or Forced Reset on the Notebook. I also suggest Downloading or Updating Software and Drivers for HP Computers.
I hope this helps, let me know how it goes.
Thank you,
I worked on behalf of HP.

HT201401 My volume control buttons are not working on my Iphone 4s....

but this only occurs when I don't have headphones in or I am not on a call. If I have headphones in or if I am on a call using either the earpiece or speakerphone I have full volume control. If I am using my phone to listen to music or anything else where there is audio the volume buttons do not work. When I press the button the buttons the ringer icon appears on the screen but there are no bars under the icon and it doesn't move the volume. I have tried rebooting the phone as well as blowing out the headphone port and the charging port. My phone is updated to the latest release. Any help would be much appreciated.

Hi
Are you talking about the function buttons F1-F9?
These buttons work in connection with FN button; i.e Fn + F5
The Value Added Package as well as the Toshiba Flash Card Support Utility needs to be installed in order to use the flash cards (the menu on the screen showing the function buttons)
These software parts can be downloaded here:
http://www.mytoshiba.com.au/support/computers/satellite/a660/psaw3a-07t00r/download?os=25
Note: before you would start with new installation try to restart the flash cards: all programs -> Toshiba -> Flash Cards

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Volume control on keyboard not working?

I have an HP Pavillion dv7-3165dx Entertainment Notebook. The volume control on the keyboard is not working anymore. How do I turn it back on?

Hi,
Try downloading and installing the latest driver from HP on the link below - this may be the same one applied by HPSA, but try installing it again.
ftp://ftp.hp.com/pub/softpaq/sp52501-53000/sp52790.exe
After the installation has completed, restart the notebook.
If the above fails to solve the issue, try reinstalling Quick Launch Buttons from the installer on the following link.
ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53135.exe
Again, restart after the installation has completed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv7-1240us volume control touch sensitive not working

vista 64bit
the touch controls for the volume, wireless on/off, and mediasmart are not working. i'm getting annoyed with contacting hp over this. does anyone have a similar issue and hopefully a fix? i'm about to use this laptop for target practice with my glock and ar15
This question was solved.
View Solution.

I have a dv7-1245dx and just started having the same problem......only had it for a few days....

Volume control button does not work as it should on Satellite P

Hello.
I rotate the button that controls the volume and i realise that it doesnt follow me!!
I increase the volume and it decreases it and with strange irregular way (very shortly)...
I decrease the volume and even it does it or it does nothing!!!
Can someone help me with that??

What notebook model do you have?
Ive got a U400 and Ive got the same volume control.
I read here in the forum about very similar issue and the guy solved this by cleaning the contacts.
There was a dirt and dust which affected the volume control functionality.
The volume control level jumped around.
I dont know how he did this but I think a compressed air spray should help you.

Volume control(s) will not work on my I Book please help !

* INFO: White 2003 G4 I Book PowerPC 1.07GHz 256 MB Safari 3.2.1 133MHZ
!!! PLEASE HELP ME !!!
I'm going nuts here...
This morning everything on my old 2003 white I Book was great. It was operating VERY fast and fine.
I turned on my computer this morning, everything worked great, and I was reading things on the Net just fine.
I then saw there was a "Software Update", two of them actually, they were a "Security Update", and also a "Java For Mac 10.4 Release 8".
I downloaded both of them successfully through the Software Update feature.
After doing that I restarted my computer, and everything seemed okay.
But now the audio on my computer is gone, or messed up somehow. NO it is NOT on mute. The volume says it is on full blast, but there is no volume at all.I played YouTube videos, I tried a regular physical audio CD, I tried radio from the internet, all no sound. I tried disconnecting my speakers, I tried a full restart, I "verified preferences" and "repaired preferences", and I also put in my Tiger original disc and booted from that and ran "First Aid"... none of these have worked.
When you click the little volume button(s) up/down from the keyboard it simply shows all volume bars to the full "all the way loud position", and a circle with the diagonal line through it just underneath that.
I looked around in System Preferences in "Sound" and saw nothing wrong there from what I could tell.
I have no idea what to do and am very frustrated and do NOT want to have to redo my whole computer from the very beginning again with the Tiger disc, I have already done that 3 times in the last two years.I know this must have something to do with the Software Updates I did this morning.
Anyone ?

Boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and done a bit of spring cleaning at the same time.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
Many of us do not let Software Update do updates. We download them from Apple and install them one by one, verifying the drive and repairing permissions before and after with Disk Utility, testing between each update. And, of course, backing up the drive completely before hand should something go wrong. We can then restore in a matter of minutes.

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

[SOLVED] Brightness control over keyboard not working, but it works...

Hello,
I recently got a new laptop at work and I put a fresh Arch on it.
Almost everything works perfectly, but I have one weird issue.
I can control backlight of my display via ACPI; I wrote a simple script for it:
pabre@pbr-laptok:~$ cat /usr/local/sbin/brightness.sh
#!/bin/bash
DEV=/sys/class/backlight/intel_backlight/brightness
MAX=`cat /sys/class/backlight/intel_backlight/max_brightness`
ACT=`cat /sys/class/backlight/intel_backlight/actual_brightness`
MIN=0
STEPS=10
STEP=$((MAX/STEPS))
if [ $1 == "+" ]; then
if [ $((ACT+STEP)) -le $MAX ]; then
echo $((ACT+STEP)) > $DEV
fi
elif [ $1 == "-" ]; then
if [ $((ACT-STEP)) -ge $MIN ]; then
echo $((ACT-STEP)) > $DEV
fi
fi
exit 0
I put myself a sudoers entry for it:
root@pbr-laptok:~# cat /etc/sudoers | grep pabre
pabre ALL=(ALL) NOPASSWD: /usr/local/sbin/brightness.sh,/usr/bin/pacman -Sy
And it works like a charm, when run from a terminal:
pabre@pbr-laptok:~$ sudo /usr/local/sbin/brightness.sh -
So, my next step was to bind that script to appropriate keys on my keyboard (Fn + UP/DOWN - which are XF86MonBrightnessUp and XF86MonBrightnessDown)
My window manager is Awesome, so I put to the config:
awful.key({ }, "XF86MonBrightnessUp", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh +") end),
awful.key({ }, "XF86MonBrightnessDown", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh -") end),
among others like touchpad toggling, volume control, etc (which are working without issues)
And now, guess what... Those keys fire that script, change the brightness and after second or less - it comes back to old value! You can see that display blinks (for example gets brighter and moment after - it goes back to previous state).
I tried to debug it, putting to the script something like:
if [ $1 == "+" ]; then
if [ $((ACT+STEP)) -le $MAX ]; then
echo $((ACT+STEP)) > $DEV
cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
sleep 1
cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
fi
And the first entry was that what it was supposed to be, while te other (second after) Was again the old value.
Does anybody have any idea what "reverts" my changes to the /sys/class/backlight/intel_backlight/brightness and why it works without issues when simply run from a terminal?
Last edited by PaBre (2014-03-16 17:10:54)

I think that I've found partial answer.
When I changed key binds to another keys - it works!
But even then, when I press XF86MonBrightnessUp or XF86MonBrightnessDown, the brightness level gets reset. And now they are not bind to anything (at last not explicit).
So it looks that I have to found how to decouple the internal, not working as expected, bind to these keys.

HT4137 the volume on my iphone isnt working

the volume on my iphone isnt working, how do I fix it?

I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!

After downloaded iOS7 my iPhone not works properly

After downloaded iOS7 my iPhone not works properly. Keyboard clicks- no sound, Skype not at all, viber ring sound, volume I can not move although the bottoms work properly etc etc etc etc. because all these problems I don't want to download iOS in my iPad. When we can fix it, and how. I need a really answer for apple. I just need to do one thing to see if it work restore to a fabric and copy again everything, but I've heard from people who has made it and nothing.
Thanks

no reply from anyone

HT204204 i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my data

hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my data

What is the exact text of the message you got? And did you not back up before you updated?

Beats earbud volume control on iPhone 5 not working

Similar Messages

Maybe you are looking for