Beats volume animation, fn+b which triggers beats, and screen brightness animation aren't working.

My hard drive crashed and i had to get a new one. when i got my laptop back all of the utilites were gone. what i want is to be able to adjust the screen brightness and have the same animation as before. i also want to turn the volume up and down and see a beats music volume animation. also when i press fn+b it turns beats music on and off but since i got my hard drive fixed it doesnt do that either. can some one please help me. thank you.

Similar Messages

Installed Camtasia which wanted Soundflower and now line-input doesn't work

I installed the Camtasia demo which asked to install Soundflower to get the audio recording working, then I went to skype and my mic/headset (attached to the line-input) no longer worked. I've tried attaching different headsets to the same input, visiting System Preferences / Sound and tapping the mic, but nothing seems to fix it, and I haven't installed anything else, so it has to be Soundflower doing something to affect the line-input.
Has anyone else noticed this? Is there any easy fix?

Thanks, I've tried that but they haven't responded yet. I wondered if anyone on the apple forums had seen a similar problem...

HT201401 My side buttons will not move volume. I have had power on and off. Sometimes it will work,sometimes not.

My volume buttons sometime work,but mostly not. I have went to sounds and turned the change with buttons off and on many times.I have turned phone power off and on many times. I have turned the orange button on the side on and off.When I try to play I Tunes,nothing. When I play solataire,I can,t hear the cards shuffle.

You haven't tried a reset? hold down power and home buttons together until the Apple logo is displayed. No data or settings are lost, and cures 99% of all known problems.

Volume, Brightness buttons won't work

My volume buttons, Screen Brightness, and Keyboard brightness buttons randomly stopped working yesterday. I have tried everything I can think of (including making sure the standard function setting was unchecked. Any ideas?

Try SMC reset
http://support.apple.com/kb/HT3964
and pram reset
http://support.apple.com/kb/HT1379?viewlocale=en_US

Can I set up different beats and chords on garageband and control it by my midi piano accordion using the Alesis io dock?

I have a piano accordion with midi, basically its the same as a keyboard. I want to know if I can set up different beats, waltz, quickstep etc on garage band, say for example a drum and guitar sound and then control it with my accordion. Ive come across Alesis io dock online https://www.alesis.com/iodock which I has the midi connections to connect my accrdion to it. Will this work as i hope it will? Also whats the best site to learn to set up garageband properly for what I want to do?

More or less I suppose. Currently what I use is a Ketron XD3 expander. I have beats and sounds programmed into it which i can control from the accordion. In other words I can change guitar chords etc from the bass side of the accordion and play different instrument sounds from the keyboard side. However its a big enough item for carrying around. If I could set up garage band or indeed any other app to do the same thing, it would be so much easier. The Alesis io dock has the midi in and out connections I need to be able to connect the accordion, but Im not sure if it works as I hope it will.

Volume animation slows down Compaq 610

Hello,
I'm having a problem when using Volume Hotkeys, in which my notebook freezes for a while to generate volume animation.
I annoys me a lot. How can I fix it, or just get rid of it (I don't need it actually)?
Screenshot:
Hope someone help.

Hi,
Uninstall HP Quick Launch Buttons from your system.
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Download and install:
HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64 bit Win7)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

How can I easily make beats and record my raps on the beats?

I am really intrested in making beats on GarageBand and then rapping on those beats. I am a very avid and quick learner and know that once I can get the hang of this my music career and really take off and go somewhere. If there is anyone out there who can help me and would like to assit me, we could make magic and let dreams come true and do big things in life. If you can help please let me know!

the "easy" way is to open the loop browser, audition various drum loops by clicking on them, picking which you like and dragging them into the timeline
a slightly less easy way would be to create a software track, pick a drum instrument you like, open the musical typing window, hit record and record your rhythm
the least easy way would be to place each note (drum beat) you want into a region:
http://www.bulletsandbones.com/GB/GBFAQ.html#addmidinotes
(Let the page FULLY load. The link to your answer is at the top of your screen)

HP Beats Special Edition 15-p030nr Notebook PC (ENERGY STAR) screen brightness issue

I'm haing a screen brightness issue on my HP Beats Special Edition 15-p030nr Notebook PC (ENERGY STAR). I upgraded from 8.1 and the F2/F3 keys to dim or brighten screen do not function. Any suggestions besides reverting back to 8.1.? Not sure if I had the screen dimmed all the way or brightened all the way when it was upgrading, or if it even mattered.

Hi @Twright2014
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see your having some sound issues with your new notebook. I will be happy to help you with this. How does the audio sound when you use a set of headphones? Try the troubleshooting steps in this HP document No Sound from Speakers which includes using the built-in Windows troubleshooter.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Can't Adjust Screen Brightness on my HP Envy 23 Beats Edition All in One PC

I can't adjust the screen brightness on my PC after updating windows. I already updated all the drivers software but the problem is not solved. Please HELP..the brightness is killing me...TQVM

Hello myizham,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues adjusting the screen brightness on you HP Envy 23 Beats Edition All in One PC. I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Need BOR & event which triggers after vendor master change.

Hi all.
Can you pls let me know the BOR & event which triggers after vendor master change. (Xk02). I used tcodes SWELS (evetn trace) , and SWEL and changed vendor adress using XK02. but I could not find any event or BOR in the trace. Pls help me out.
Cheers,
sam.

Hi
when we change the vendor details we dont have the event which is automatically triggered by the system so we create an zbusinessobject as subtype for the vendor(LFA1) as supertype.
and create a new event in that z business object .
change document for the vendor is KRED you can check it in the CDHDR table by giving tcode name.
after finding changedocument object go to SWEC and create a newentry specifying your changedocumentobject name and BO name and event name and click on radiobutton onchange.
and now you can check whether an entry is getting in swels or not when changing the vendoor details.
Thanks.

Exit which triggers after SO Save

Dear Experts,
I have a requirement to send auto mail to user on customer credit status when user create Sales Order and save.
I did all the necessary code in the form routine USEREXIT_SAVE_DOCUMENT of include program MV45AFZZ.
USEREXIT_SAVE_DOCUMENT will trigger before the document save but I need the condition value for that SO and that will be available only after the Order saved therefore my requirement will be completely fulfil if there is any exit which triggers after Order saved, please let me know if there is any exit triggers after SO saved.
Thanks in advance...
Regards
Venkat

Hi Venkat,
I think you can achieve through output. You can create an output condition similar to KRML (in which the credit data is send to credit rep) and modify the same as per your need.
How ever the desired credit data that you are looking for can be called from sales summary(t code-VC/2): Info block 018 Credit info.
Hope this will help you.
Please revert to forum if have further doubts
Cheers
Atul

Need badi which triggers immediately after saving the vendor master data

Hi all.
    I need a badi which triggers after vendor master (xk02) is changed . The badi should trigger after the data base commit ( i.e after all the changes have been stored in data base tables). Pls let me know
Thans in advance.

try these:
EXIT_SAPLV45T_001      V45T0001     Customer exits text determination
EXIT_SAPMF02D_001     SAPMF02D     User exits: Customer master data
EXIT_SAPMF02K_001     SAPMF02K     User exits: Vendor master data
EXIT_SAPMV45A_002     V45A0002     Predefine sold-to party in sales document
EXIT_SAPMV45A_003     V45A0003     Collector for customer function modulpool MV45A
EXIT_SAPMV45A_004     V45A0003     Collector for customer function modulpool MV45A
BADI's:
CUSTOMER_ADD_DATA     CUSTOMER_ADD_DATA     Additional Data at Customers
CUSTOMER_ADD_DATA_CS     CUSTOMER_ADD_DATA_CS     Additional Data at Customers (Subscreen Container 4000)
VENDOR_ADD_DATA     VENDOR_ADD_DATA     Additional Vendor Data
VENDOR_ADD_DATA_CS     VENDOR_ADD_DATA_CS     Additional Data for Vendors (Subscreen 4000)

Don't know which triggers to use, please help.

Hi,
I'm a newbie to forms. I have a question about what triggers to use for my situation. I can't seem to find many examples for what I want to accomplish. I have tried using the online help (within forms) but sometimes they don't always have examples for their triggers).
Here's my scenario:
I have six items, five of which are text database items and one is a non-database display item (TOTAL). Each of the first 5 items holds a numeric value and the TOTAL item will store the sum of the previous 5. Of first 5 items, only the 4th item (POINTS) can be updated within the form (and I have set the Enabled propety to 'No' for the first 3 items). I have a function, TOTAL_COUNT, that will do the sum calculation and it works fine in a POST-QUERY trigger populating the value into TOTAL. However, what I'd like to do is anytime a user enters a new value in POINTS and then tabs or mouse clicks into the next item TOTAL, I'd like to call my function to update and display the new total value in TOTAL.
Does anyone know which triggers and/or code I can use to accomplish this? The code I use to call a function is:
:block_name.item := function_name(:parameter)
For your recommed triggers, can I just use that code to call my function or will I need any other syntax i.e. BEGIN...END, etc within the trigger body?
Any quidence would be greatly appreciated.
Thank you,
Eric

Hi!
1. Set Calculation Mode property of ITEM_5 to Formula.
Formula property:
nvl(:Block_Name.ITEM_1, 0) + nvl(:Block_Name.ITEM_2, 0) + nvl(:Block_Name.ITEM_3, 0) + nvl(:Block_Name.ITEM_4, 0)
OR
Function_Name(Param_1,... Param_N);
Have in view of, that the ITEM_5 data will not be saved in DataBase.
2. When-Validate-Item trigger is usfull when is necessary to store calculated item data in DataBase.
Rename you Post-Query trigger to When-Validate-Item.
Modify trigger: Store calculation result in the variable.
(Don't forget to round variable value!)
Then compare it with ITEM_5. If they are different - :ITEM_5 := var_name.
I prefer the first method.

Playhead jumps back a beat and a half every time I press play

Hey Everyone,
Having a very strange problem here where I'll position the Playhead where I want to start playing, press the space bar to begin playback, and the play head will jump a beat and a half behind its current position and start playing from this earlier point. If the track is already playing, and I click a position, the playhead jumps exactly where I indicated and continues playing from there. The problem only occurs when I stop playback, position the playhead, and press play. Anyone seen this before? Any Idea how to fix it?
Thanks!
David

(palmslap to the forehead)
That's it... Good thinking, RH

Write an ABAP program in BW which triggers an event in R/3

Hello People
Method: I need to create a Process Chain in BW for info package loading. In the PC, after the loading occurs, I need to write an ABAP program which has the FM: RSSM_EVENT _RAISE , which triggers a pre-defined event in R/3. This event in turn triggers a 'z' program in R/3.
Now, I know that we can use SM62 in R/3 to create the event. But how and where do i need to write the abap code in BW. And do i just place it in the PC after the loading process? Do i need to inculde the FM in the ABAP code? Does the FM know the server in R/3 ( DEV or QA or PROD ) where it needs to trigger the event? And how do i schedule the 'z' prog, so that it starts after the event?
Please help.
Thanks in advance.

Create and rfc function module in r/3 in which code you trigger the event, created in r/3 too.
You can, and should to do it, include a report as step in your process chain in order to trigger event at finish of process chain.
Here a sample
r/3 side.RFC function (get and trigger event)
FUNCTION Z_RAISE_EVENT.
""Interfase local
*" IMPORTING
*"     VALUE(EVENTID) TYPE TBTCO-EVENTID
*" EXCEPTIONS
*"      BAD_EVENTID
*"      EVENTID_DOES_NOT_EXIST
*"      EVENTID_MISSING
*"      RAISE_FAILED
*"      OTHERS
CALL FUNCTION 'BP_EVENT_RAISE'
    EXPORTING
      EVENTID                      = EVENTID
    EXCEPTIONS
      BAD_EVENTID                  = 1
      EVENTID_DOES_NOT_EXIST       = 2
      EVENTID_MISSING              = 3
      RAISE_FAILED                 = 4
      OTHERS                       = 5
CASE SY-SUBRC .
    WHEN 1.
      RAISE BAD_EVENTID.
    WHEN 2.
      RAISE EVENTID_DOES_NOT_EXIST.
    WHEN 3.
      RAISE EVENTID_MISSING.
    WHEN 4.
      RAISE RAISE_FAILED.
    WHEN 5.
      RAISE OTHERS.
endcase.
ENDFUNCTION..
BW side.Report to call previous rfc function
REPORT Z_RAISE_EVENT                           .
parameters: EVENTID like TBTCO-EVENTID.
parameters: destino like RFCDES-RFCDEST.
parameters: test as checkbox default 'X'.
IF TEST EQ SPACE.
CALL FUNCTION 'Z_RAISE_EVENT'
    DESTINATION DESTINO
    EXPORTING
      EVENTID                      = EVENTID
    EXCEPTIONS
      BAD_EVENTID                  = 1
      EVENTID_DOES_NOT_EXIST       = 2
      EVENTID_MISSING              = 3
      RAISE_FAILED                 = 4
      OTHERS                       = 5
CASE SY-SUBRC .
    WHEN 1.
      RAISE BAD_EVENTID.
    WHEN 2.
      RAISE EVENTID_DOES_NOT_EXIST.
    WHEN 3.
      RAISE EVENTID_MISSING.
    WHEN 4.
      RAISE RAISE_FAILED.
    WHEN 5.
      RAISE OTHERS.
ENDCASE.
ENDIF.

Beats volume animation, fn+b which triggers beats, and screen brightness animation aren't working.

Similar Messages

Maybe you are looking for