Because it is better to use ADF for oracle SOA/BPM

because it is better to use ADF for oracle SOA/BPM?
TKY for your answers
yango901

Generally it is if you're comparing identical compressors & resolutions but there's something else happening here. If you're worried about quality degrading; check the original file details on the camera (or card) either with Get Info or by opening in QuickTime and showing info. You should find the iPhoto version (reveal in a Finder) is a straight copy. You can't really increase image quality of a movie (barring a few tricks) by increasing file size but Apple editing products create a more "scrub-able" intermediate file which is quite large.
Good luck and happy editing.

Similar Messages

Which is better as UI technology among Flex and Oracle ADF for oracle SOA suit

We have one application which is using oracle’s Service oriented Architecture (SoA) suite. Currently, there is a debate on the technology for UI in the new architecture that will be rich, easy to maintain, scalable and integrates well with SOA suite. We have two options one is Flex and other is Oracle ADF. UI part contains number of graphs, tabular and charts data. So it would be great if any one suggest which technolgy will be better for UI point of view. Thanks in advance.

Hi,
I looked at the demo
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF112/ADF112.html
It's interesting.
However, I would point out two things:
1- Before Oracle, Sun failed with UI technologies: there was AWT then Swing then Java FX. None of them was a star. The only place where Sun really won the UI war is the Bluray Disc format.
2- About half of the RIA in the financial/banking industry are developed with Flex, the other half is developed with Silverlight / WPF. HTML 5 is being taken up by some, but you still end up with the usual problem of having to pick up an AJAX framework, and get tied to a vendor anyway in the end. Never heard about any project developed with Oracle ADF yet.

Which is better as UI technology among Flex and Oracle ADF for oracle SOA s

We have one application which is using oracle’s Service oriented Architecture (SoA) suite. Currently, there is a debate on the technology for UI in the new architecture that will be rich, easy to maintain, scalable and integrates well with SOA suite.
We have two options one is Flex and other is Oracle ADF.
UI part contains number of graphs, tabular and charts data. So it would be great if any one suggest which technolgy will be better for UI point of view.
Thanks in advance.

Hi,
I looked at the demo
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF112/ADF112.html
It's interesting.
However, I would point out two things:
1- Before Oracle, Sun failed with UI technologies: there was AWT then Swing then Java FX. None of them was a star. The only place where Sun really won the UI war is the Bluray Disc format.
2- About half of the RIA in the financial/banking industry are developed with Flex, the other half is developed with Silverlight / WPF. HTML 5 is being taken up by some, but you still end up with the usual problem of having to pick up an AJAX framework, and get tied to a vendor anyway in the end. Never heard about any project developed with Oracle ADF yet.

How can I use custom WLST commands for Oracle SOA Suite in Weblogic

Hi There,
I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
However, my WLST shell is not recognizing the commands and giving me the NameError!
wls:/devDomain1/domainRuntime> listLogs()
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: listLogs
I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
- Launched the WLST shell from Oracle Home.
cd ORACLE_HOME/common/bin
./wlst.sh
- Tried to run the listLogs command from domainRuntime()
I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
There is no SOA Suite installed.
Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
Please advise if this is possible and how?
Cheers.
Satish

I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
I hope this can help

Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s

Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!

Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2 default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i, l_columnValue );
            utl_file.put( l_output, l_separator || l_columnValue );
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059

How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

I created a virtual machine on vmware workstation 6 and installed OEL4.
during first install I created 20 GB disk but now I want to add more disks.
from vmware documentation I tried to add more 8 gb disk to the virtual host.
under devices I see two lines;
Hard Disk (SCSI 0:0) 20.0 GB
Hard Disk (SCSI 0:2) 8.0 GB
but I must be missing some step since I can not see 20 + 8 gb at df;
[root@antuhost ~]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/sda1              13G 9.7G 2.3G 82% /
none                  506M     0 506M   0% /dev/shm
/dev/sda2             4.9G 851M 3.8G 19% /homeThank you.

Oh the check the answer from Re: How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

How to configure eclipse for Oracle SOA 11gR1 development

Hi,
I have installed oracle 11gR1 ( 11.1.1.3.0) and have found that Eclipse (Galileo) as development tool. When I opened Eclipse to create new SOA Project for BPEL development, I could not able to find a SOA Project category. I assume that we need to install plug-in for developing the SOA Project.
I browse through the site and could not able to locate anything quite useful. Could you please guide me on how to proceed..
Is Eclipse the strategic development environment for Oracle SOA 11gR1, R2 development.. ?

http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm

What are the use cases of Oracle SOA Coherence?

Hi All,
I would like to understand the actual use cases of Oracle SOA Coherence? Also, Coherence is bundled with SOA Suite or we need a separate License for it?
Regards
Manju B.S

Hi,
Just check below link..would be helpful..
http://www.oracle.com/global/ap/openworld/ppt_download/database_manageability%2011g%20overview_230.pdf
and
Each release of Oracle has many differences, and Oracle 10g is a major re-write of the Oracle kernel from Oracle 9i. While there are several hundred new features and other differences between 9i and 10g, here are the major differences between Oracle9i and Oracle10g:
Major changes to SQL optimizer internals
Oracle Grid computing
AWR and ASH tables incorporated into Oracle Performance Pack and Diagnostic Pack options
Automated Session History (ASH) materializes the Oracle Wait Interface over time
Data Pump replaces imp utility with impdp
Automatic Database Diagnostic Monitor (ADDM)
SQLTuning Advisor
SQLAccess Advisor
Rolling database upgrades (using Oracle10g RAC)
dbms_scheduler package replaces dbms_job for scheduling
and you need to refer oracle documentation for sql, plsql references where you will know particular enhancements made...
thanks
Prasanth
Edited by: Onenessboy on Oct 23, 2010 10:22 AM

Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite

Somebody knows where to find this document for BAM 11g TP4 ?
Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite
I need to add new users for BAM and I m not able and the User's Guide for Oracle Business Activity Monitoring tells me I should look for the login management in this doc.
Tanks

Weird? fmwadmin stands for Fusion MiddleWare Admin. Quite easy to remember...
--olaf

Single Vertical Line When Using ADF for Scan or Copy on HP Officejet Pro 8600

HP Officejet Pro 8600 Premium Printer (CN577A)
OS: MS 7 64 bit
When using the ADF for my CN577A HP Officejet Pro 8600 Premium printer, I get a single vertical line on the document that is produced. This occurs when copying or scanning, both in black and white, and in color. If I scan or copy using the glass, I don't get the vertical line.
I already tried the troubleshooting. I unplugged the printer, left it without power for several minutes; that didn't correct the problem. Next, I cleaned the rollers and the glass; I still get the vertical line, but only when using the ADF.
My firmware version used is current (CLP1CN1150CR).
What should I check next?
This question was solved.
View Solution.

The ADF uses its own glass area on the scanner bed, it is the narrow (about 1" wide) strip on the left. Cleaning this area should resolve the issue. A single small spot would cause the issue you are seeing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Getting backup using "backint for Oracle" to work

Hi
We are trying to get the backups to work on MaxDB 7.6 using the backint for Oracle interface.
I have created an environment/config file and set the variable NSR_ENV. The contents of this file is as follows:
NSR_HOST           cmsapapp01.csenergy.com.au
NSR_HOME           "C:\Program Files (x86)\Legato\nsr\bin"
NSR_POOL           SAPData
NSR_EXPIRE         year
NSR_EBIDTYPE        NSAVETIME
NSR_USEOUTPUT        SAVE
I have created a backup media with the following options:
Backup Type: Full Backup
Device Type: PIPE
Backup Tool: NSR
Device File: c:\temp\file.pipe0
When I run this, I get the following error:
Begin of error output of NetWorker (C:\WINDOWS\TEMP\temp1204089773-1)----
        save: VSS Enabler is requested from NetWorker License Manager.
        save: c:\temp\file.pipe0: No such file or directory
Am I doing something wrong...
OS is Windows 2003.
Thanks
Doug

Hello Doug,
on Windows the pipe syntax is as follows:
.\pipe\<pipename>
HTH,
Melanie

Why should we use BRTOOLS for oracle data backup?

Hi there,
Any one of you have any idea on specific advantages with using BRTOOLS for backup over using only Oracle RMAN?
Are there any advantages using brbackup in databackups which we do not get with RMAN alone?
thanks
Arlin

i seriously doubt you want to use wsdl4j unless you are doing really advanced webservice work. assuming you are developing this webservice from scratch, you basically want to use JAXWS: define an appropriate interface and your value classes, and let JAXWS do the rest. metro is the JAXWS implementation included in the oracle jdk and it has great tutorials and reference documentation online. i'd suggest you start here: http://metro.java.net/getting-started/

Have anyone used rejectedMessageHandlers for Oracle ESB 10.1.3.1---urgent

Hi,
I am using rejectedMessageHandlers property for Oracle ESB(10.1.3.1).
I am reading data from a file and writing out the data into another file.I need to implement the following scenario:-
If it enconters some error in the structure of the file or encountered any error while reading the source file then it will generate a file dumping the error message and the payload.
For this I have used an endpoing property in "DefaultSystem_Read_RejectionHandler.esbsvc" (the esbsvc file for the File Adapter service for source file).
*<endpointProperties>*
*<property name="rejectedMessageHandlers" value="file://C:/jdevstudio10133/jdev/mywork/RejectionHandler/ESBRejectionHandler/reject"/>*
*</endpointProperties>*
But the file that is getting generated is "INVALID_MSG_null_Read_20081229_064024_0117.dat" with no data in it.
Can I use the property rejectedMessageHandlers for version 10.1.3.1 for Oracle ESB?Did anyone tried it out?
Can anyone also guide me with links or docs regarding usage of RejectedMessageHandler for Oracle ESB and Oracle BPEL.
thanks
Edited by: user612888 on Jan 5, 2009 9:17 PM

Thanks Marc.
I was not able to find the patch on metalink. Could you please give me the patch number specific to only ESB 10.1.3.4 if you have.
I have the 10.1.3.4 patch number(7272722) for the complete SOA suite.
Also please comment on adapters part.
Thnaks.

Using ZFS for Oracle RAC 11gR2 binaries

Hi,
We have following scenario,
Two Node Cluster: Oracle RAC 11Gr2 with Clusterware on Solaris 10
We want to keep Oracle & Clusterware binaries on ZFS mirror file system on each node locally and for Data files, FRA, Voting disks & OCR on shared SAN using ASM.
My question, is the above scenario certified by Oracle or can we keep Oracle binaries on ZFS...?
Will appreciate your input.
Thanks

Well my confusion started after reading this doc on oracle support:
Certification of Zeta File System (Zfs) On Solaris 10 for Oracle RDBMS [ID 403202.1]
"Oracle database 10gR2 (10.2.0.3 and higher patches), 11gR1 (11.1.0.6 and higher patches) and 11gR2 (11.2.0.1 and higher patches) are certified with Solaris 10 ZFS on Sparc 64-bit and Solaris x84-64. See Solaris ZFS_Best_Practices_Guide. This is for single instance ONLY. ZFS is currently not applicable to RAC and not Certified to use it as a shared filesystem."

Oracle VM Manager: Includes a Restricted-use License for Oracle Database?

I'm evaluating OVM and OL for building a small private cloud and - at this stage of the evaluation - am primarily focused on making sure that I understand the licensing requirements of Oracle virtualization.
The Oracle® VM Installation and Upgrade Guide for Release 3.1.1 states that...
Oracle VM Manager includes a restricted-use license of the
Oracle Database (Standard Edition or Enterprise Edition) for use as
the Oracle VM Manager Management Repository only. The supported
version of Oracle Database are...
Am I understanding this correctly? Does this mean that, for the purposes of implementing Oracle VM Manager, it will not be necessary to purchase a license for Oracle Database (11g) Standard Edition?
Eric Pretorious
Truckee, CA

For the uninitiated and/or impatient: In order to use Oracle Database 11g SE/EE instead of Oracle Database XE...
>
Oracle VM Manager can be installed in a demo installation using Oracle XE, or as a production installation using Oracle SE or EE. The demo installation installs Oracle XE on the local host and configures it to use as the repository. *The production option collects information on the pre-installed Oracle Database* and uses it as the repository...><ol>
<li>Go [url http://www.oracle.com/us/products/database/standard-edition/overview/index.html]the Oracel Database 11g product page.
<li>Follow the link to [url http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html?ssSourceSiteId=ocomen]the Download Page.
<li>Follow the link to your preferred architecture.
<li>Review and accept the EULA.
<li>Download the packages.
<li>Follow the link to the Documentation Page:
3. Installation guides and general Oracle Database 11g documentation are here.<li>Follow the link to the documentation about "Installing and Upgrading".
<li>Download the Database Quick Installation Guide for your preferred architecture.
</ol>
Eric Pretorious
Truckee, CA
Edited by: epretorious on Sep 13, 2012 6:50 PM - Added a signature.

Because it is better to use ADF for oracle SOA/BPM

Similar Messages

Maybe you are looking for