Because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
my mac pro is an early 2008 intel xeon hapertown
thanks a lot
patrick stanley thiollet
Thought you could use this info about getting FireWire to work! First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 15 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.
Similar Messages
-
when trying to use my webmail service it says i need some java to run reply to the emails. i am using an iPad iOS 6.1.3
what do i hve to do to be able to use my webmail ?Java is not supported on iPads. Does your provider have a non-Java version or have their own app, or could you use the Mail or a third-party email app for it ?
-
I want to add some fields in the report of FBL5N, Can anybody tell me how ?
I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri -
i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097 -
I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
HT1657 Do I need a wifi connection to watch once the movie has been downloaded
Do I need a wifi connection to watch once the movie has been downloaded
Nope.
Watch it anywhere you want no connection needed. -
I now have two iPads and have opened a new icloud account. I need to change one of the ipads to the new account. Can you tell me how to do that?
Welcome to the Apple Community.
settings > iCloud, scroll down and delete account. Re-enter the details of the new account. -
Need some info about getting started with the GE70 2PC Apache
Hi guys!
I'm about to getting the new GE70 2PC Apache gaming notebook from MSI and since I'm really putting alot of money in this I really wanna handle it gently :p So I got some questions about this, since It'll be the first time I'd but a gaming notebook.
1) 1st of all, what do I do when I've first started the laptop? Do I place in the CD and install all the newest drivers from that CD? Afterwards install an anti virus and then I should be good to go?
2) I heard the Haswell i7 processors from Intel produce a hell of a lot heat. When I turn on turbo fan and turbo boost and I reach temperatures of around 90°C, would it harm the hardware of my laptop? Could any damage take place? Or would my processor/graphic card have a shorter life expectancy?
3) The graphic card would be the GTX 850m. Now I'm wondering, is on this particular laptop -> (MSI-ge70-2pc-019be-apache-azerty), is the graphic card the DDR3 version or the GDDR5 version? Because I heard even the GTX 765m can outperform the 850m DDR3. But I also heard that the GDDR5 version of this graphic card is noticeably better than the 765M graphic card.
4)Is it wise to keep the processor going on turbo boost (3,4 Ghz) forever?
5) Will I have internet problems? I heard alot of people having internet problems with the killer lan drivers lately..
6) What laptop do you think I should pick in overall? The 2PC Apache version or the GE70 2OE version (the one without SSD) ?
8) My Brother has the GE70 2OE which has the 765m graphics card, but he only has around 60 fps when he's playing League Of Legends, and LoL isn't the most demanding game right.. The FPS sometimes even drops to 40 (even when he's ALONE with no one around him). It feels like his FPS is capped at 60? Because most of the time it's just 60. But when I look at the settings I saw the FPS is uncapped.. I believe with this graphics card he must atleast achieve a constant 70-80 fps on this game right? Might something be wrong in the settings of the graphics card?
7) Is there anything I should know before I start gaming on this laptop? (something I should do to have best performance or something..?)
GrtzWell...
1. When you get the laptop, use MSI Burn Recovery and make the backup disks (I prefer DVD's myself...). This way if something happens, you can reinstall all the software like you just bought it.
2. Haswell does produce quite a bit of heat. As long as you don't get much higher than 90C you should be ok. If you're getting into the high 90's or even 100C range, you probably need to replace the heatsink compound. MSI has had a number of issues with that aspect on notebooks. It is easily done though.
3. The only way to really answer that question is probably to contact MSI about it. >>How to contact MSI.<<
4. Turbo boost isn't really user controlled. I wouldn't worry about it.
5. You might have issues. I'm honestly not too sure. I know most people haven't had issues recently, but that's all relative. The drivers seem to be working rather well right now to be honest.
6. Depends what you want and what is available. Maybe the GE70 20E + buy an SSD will be cheaper than just buying the Apache version. I don't really know, but you could always look into it.
8. The 765M is a decent card....but remember, it's NOT the same as a 760 on a desktop. It's roughly equivalent to a 750 in the desktop world. That's not a bad card by any means, but you aren't going to be able to get 60+ FPS at 1920x1080 in many games. LOL is rather demanding as a game though to be perfectly honest. (throwing my personal opinion in on this, I always buy the highest end item I can in this case, because you won't be able to get any better really in the end until the next laptop comes out).
7. I would setup all your games in the NVidia control panel to use the NVidia high performance graphics processor. That way there is no confusion and it will use the right video card.
You don't really need to update drivers UNLESS you're having an issue (like BSoD's or game freezes or something similar).
The MSI customer service in the EU really seems to be hit or miss. Some people seem to get good service, some people get really crappy service. I'm honestly not sure what the problem is over there. =/ -
What feature does iPad have in placement of flash player. Not having access to many web sites is killing the iPads appeal?;,
Not to sounds rude, but this issue has been covered so much in the media that I find it hard to believe that people still don't know. However all iOS devices, never and will never support flash natively. Google "apple adobe flash war". There are some alternatives, try skyfire browser in the app store. Not perfect but might help. None the less, most sites these days support html5 video which runs on iPad. I am actually having hard time running across a site which doesn't support iPad. however that is my personal experience based on my personal interests.
-
HI my name is sameeralam I am using iPad old model no. Is MB294ZP version 5.1.1(9b206)
SN.no GB033QCEZ3A I am unabletoinstall any apps cos iPad need update iOS 7pls tell me how can I install any apps without update version pls replymeas soon as possible
THanks Apple TeamYour iPad can't be updated past 5.1.1. If desired, click here and try following the instructions.
(126418) -
Need some help killing threads (not in the way already mentioned..)
I have read the ways in which we should safely kill a thread - and for the most part i understand that. But my question is HOW to implement it in the way that I need.
Basically I have a multithreaded (ewww) app that really is a large job scheduler running 24/7. It can run anywhere from 1 to 15 jobs at a given time. This is fine. What i need is to have the ability to 'kill' a job when I need to. When the app daemon decides its time to run a certain job (based on business logic) it kicks one off, which is a class I made that implements Runnable.
public class SchedulerProcessThread extends SOQBase implements Runnable{}
when its time to start a job i do the usual:
SchedulerProcessThread spt = new SchedulerProcessThread(blah);
Thread t = new Thread(spt, "fooname");
t.start();
Now, this comes to my problem of where/how to kill the job (if needed). A SchedulerProcessThread is linear and finite so it will always have a termination point - it never loops. And when one is kicked off - i do not have a reference to it anymore - I mean, I couldnt if i am constantly running new jobs, potentially hundreds every hour. And jobs can be started in various places in the app, depending upon whether others are already running, etc.
I wish to implement the do-while (alive) logic on the job thread. So in the 'run()' method of my SPT class, I would like the:
while (alive) {
doProcessing();
But how can i invoke a method on my class [SPT] so that it changes the alive var from true to false when i do not have a reference to it?
As a side note, I have a command prompt on the app whereby i can call up all the running 'jobs' which is a list of the running threads under a threadgroup called 'soqjob' (all new Threads that are started with a passing param of and SPT object are under the 'soqjob' threadgroup). So now i can see all those 'soqjob' threads which are currently running Thread objects that have been passed new instances of an SPT class.
Is there anyway i can grab the 'soqjob' thread of my choice and somehow access my SPT class that was originally passed to it in the Thread constructor? if so, then I could pass in the command to stop the do-while loop.
Hmm - does any of this make sense? If i can sum up, the problem is i do not know how to access my own SPT class once I have passed it into a thread object and invoked that thread object's 'start()' method. if i can do that, then i can switch the ALIVE var from true to false and thereby kill the SPT job i need.
Any ideas?
Many thanks
IanI would add a Collection (synchronized) to the Scheduler that holds a reference to all the Processes. Pass a reference of the Scheduler to the Processes so that when a Process is done, it can remove itself from the Collection.
public class Scheduler {
private Collection threads;
public void addProcess() {
Runnable runnable = new ProcessThread(this);
Thread thread = new Thread(runnable);
thread.start();
threads.add(thread);
public void removeProcess(ProcessThread thread) {
threads.remove(thread);
private Thread getSelectedThread(Component c) {
//Find Thread in Collection and return it
private class Action implements ActionListener {
public void actionPerformed(ActionEvent e) {
Thread thread = getSelectedThread(e.getSource());
thread.interrupt();
class ProcessThread extends ... implements Runnable {
private Scheduler scheduler;
public ProcessThread(Scheduler s) {
this.scheduler = s;
public void run() {
while (!Thread.interrupted()) {
try {
doProcessing();
Thread.yield(); //Give the other Threads a chance to do some work
} catch (InterruptedException e) {
Thread.currentThread().interrupt();
this.scheduler.removeProcess(this); //Remove this Thread from the Scheduler's Collection
}Did you consider using the classes java.util.Timer and java.util.TimerTask? -
I need some help with Audigy 4( not the pro, just audigy 4) before I
okay, I got to downloads, and go to audigy 4 series, and find there is only audigy 4 pro, there not the regular, so my question is, do I use the audigy 4 pro drivers, or am I out of luck, because I am running x64, otherwise I'd get an x-fi card, but need a quick fix, bro's sound went and told him he could have my card, but need to know this before I buy, otherwise, I may just get the audigy 2 value or zs...anyone that can help plz do?
Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen
-
I-Trigue 5600. need some proper, serious wiring advice not the (useless) pretty pictures
Ansd what a disappontment the I-Trigue 5600 doumentaton s and teh product is notceably excluded from some areas of your web site.
I am trying to output from 2 x RCA audio out connectors on my Sony KDL-V32A2U LCD TV. The diagrams iin theQuick Start Guide are unclear. How do I best connect so that I can upmix to 5.1
Please help. It's so frustrating!!Lovepeaceguru,
If your TV is using RCA connector, you need to get a dual RCA to stereo minijack(3.5mm) cable. Have the RCA end connected to your TV and stereo minijack end to the subwoofer audio input(FRONT). Next, have the switch behind the subwoofer slide to 2CH->5.1 upmix.
Jason -
I was wanting to create a form that would show sample information in a watermark effect that would diappear once the field was clicked onto.
Example form question and field below:
Rather than the blank fields I wanted them to show some examples (in faded text) but which dispeears once the field is clkicked into (nuch the same as a web search online works)
Anyone know if this is possible?See this thread:
http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx
Maybe you are looking for
-
Trying to use 3 input parameters and getting errors
The code I am using was modified from code that worked using one parameter. Below is the code. I don't have a problem until I go to add values to the collection object. Then those 3 lines error, which I think also causes the next 3 lines to error. Do
-
HP Officejet Pro 8600 Plus will not print from my MacAir
I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for a
-
I love using Siri and your maps. But in Costa Rica, your maps lack of businesses data, and Siri is unable to provide any information about them, since this information is missing. I want to offer my time and work for free to help to populate this i
-
STOP keyword replacement in SAP ECC 6.0
Hi, Can anyone please suggest me the replacement for the STOP keyword? EXIT seemed like an option but as per the documentation, the STOP statement takes the control to the END-OF-SELECTION event whereas the EXIT will terminate the program. I need the
-
Ovi chat (contact Ovi) nokia C6
Hi I have a problem ovi chat (in contacts) from my nokia C6-00. just get the first message that is written. if you send multiple messages without responding does not show more. tone sounds only message, but does not display the message. the phone is