BED(14%) not appearing at the time of creation of Export Sales Excise Inv

Dear All,
While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
Best Regards
Atul Keshav.

Dear Atul,
Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
regards,
Sudhir
Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

Similar Messages

Note messages at the time of availability check in sales order entry form

Hello Friends,
Im getting the following note messages at the time of availability check in the sales order entry form.
ATP Process resulted in no data
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
Can somebody please guide me in resolving this error.
We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
Regards
Anil Wadhwa

Hi Anil
Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
You can find actual steps to be performed on metalink.
Thanks
Navneet Goel

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

"Budget Exceeded" error not appearing at the time of changing PR but appearing at the time of PO change.

Dear All,
At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing.
List of steps:
PR created.
PR released
PO created with reference to PR and released.
PR value changed to a value more than the available budget - No budget exceeded error.
PO value changed in accordance with the PR - System throwing the budget exceeded error.
Now the issue is why the system bypassed the budget exceeded error at the time of PR value change and only giving the error at the time of PO value change. Also, we observed that while changing the quantity in PR which results in exceeding budget, system is giving the error. But while changing the value system is not giving the budget exceeded error.
Your inputs will be highly appreciated. Thanks in advance.

Hello Saurabh,
Thank you for your inputs. Below is the output of CJI5.
Ref,Doc Category Debit Date     Oty       Object    Cost Elem.   Val/CO Area Crcy   Total Qty.     UM
PREQ                  28.05.2014    WBS     XXXXXX    XXXXXX           0.00                         0            EA
POrd                    28.05.2014    WBS                                       14,000.00                1000          EA
From the above output i think system is not capturing the PR commitment. I'm not sure as i'm basically into MM and dont know much about PS.
Why the system is stopping with budget exceeded error at the time of PR creation and not giving any error while changing the PR value after PO creation. System is giving budget exceeded error if quantity is changed in PR. Please explain the standard system behavior and suggest how to enable control at the time of PR value change.
Thanks in advance.

Progress bar in the portal does not appear all the time when loading

Hello All,
I have a dashboard in EP, when I click on it the majority of the time a progress bar appears when it is loading. Some time it does not, the page just appears to be doing nothing, then the dashboard will appear.
Any one else seen this issue?
Thanks

Hai check whether your using the latest EP patch levels that may solve your issue.
GoodDay.

Backups do not appear in the Time Machine "time travel window

After reinstalling my complete system (10.5.8) from the TM backup everything works fine except, in the time travel window only the backups after the complete reinstall show up. Anything earlier is grayed out. Opening the backup HD shows everything being there.
I did check the TM help to no avail.
Any ideas anybody?

Hi, and welcome to the forums.
TM has apparently started a new "sequence" of backups. See #E1 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.

Text & Image in form Header - Image not appearing all the time

Hi,
I saw a couple of other discussions in the Community, but didn't see an answer anywhere? I am putting my logo (jpg, 283kb) with Text in my header and while it appears when designing in FormsCentral, when I save as PDF it doesn't appear when viewing in Adobe Acrobat Pro XI
Please help, thanks in advance for it!

This is more than likely an issue with the color profile in the image you used not being supported by the PDF - this FAQ describes the issue and ways to fix it:
http://forums.adobe.com/docs/DOC-4144
Thanks,
Josh

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine.

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine. What do I do?

Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Scroller not appearing in the popup when opened for the second time

Hi,
I have a popup window which has three tabs A, B, and C. My tab A has BorderContainer > Scroller > Vgroup
When opened for the first time, I can see the scroller. But , when opened for the second time, the scroller does not appear and the content in th Border container seems truncated.
Please help.

No answers, but I may be seeing something similar.
I'm converting a project from Flex 3 to 4. In a popup (Spark TitleWindow) I have a some TabNavigators. On subsequent openings of the popup, the contents of the navigator children don't always render. After some changing of various Halo components to their Spark equivalents, I thought the problem had gone away. But the problem seems to have come back.
In my case, I'm not sure if the "subsequent opening" is the key issue. Sometimes, the contents of nested TabNaviagtor children don't render on the first opening. although the first child content always renders. But the problem seems to increase in subsequent openings. (I.e. more children of TabNavigators don't render.)
Perhaps not connected, but I notice when this happens, the outside borders of dataGrid components don't render in components outside of TabNavigators. I suspect there's a simple thing I need to to do to fix this, but I haven't found it. Any hints or insights would be welcomed.

HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support
If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

BED(14%) not appearing at the time of creation of Export Sales Excise Inv

Similar Messages

Maybe you are looking for