BED AND ECS AMOUNT IS MORE IN MIGO EXCISE HEADER TAB

Hi Guys,
When I am processing the MIGO, in exise tab(Header) the amount of BED and ECS are 10 time more than the acctual amount. Where as the Item details Excise tab it is correct as per the Purchase order.
Can some body tell me how/from where this headder amount being calculated or flowed.
Thanks
Dhanu

HI,
If you have done the GR against a PO which has multiple line items then the Excise values which appear in the Header is the summation of excise values for all the line items.
The excise values for each line item can be viewed in the item details of MIGO transaction.
Hope its clear.
Regards,

Similar Messages

  • Which table i can get BED and ECS+SHEC values

    Hi all
    which table i can get BED and ECS+SHEC values and how i link to PO number..
    plz help me
    thanks
    ramesh

    Hi
    please search before you post the question ,
    this query is discusssed many times in the forum
    [Searching|http://lmgtfy.co/?q=sapexcise%20table]
    for excise check table J_1IEXCHDR for header
    J_1IEXCDTL for item excise

  • Export proces( is BED and ECS come in the Billing).

    Hi,
    Iam implementing the Export sale in my Company.My doubt is shall we take the BED and ECS in the Excise Invoce?
    Here my client using the excise process under BOND. Wt are the pre requisits required?
    regards,
    jyothi.

    Dear Jyothi
    For excise purpose, in export billing, the value of  BED and ECS should flow.  Based on this, when you create excise invoice in J1IIN, the respective values will be captured.
    To process Exports under Bond, in IMG you need to set the following settings.  Logistics-Execution --> Tax on Goods Movements --> India --> Outgoing Excise Invoices --> Maintain Default Excise Groups and Series Groups.
    Here for the combination of your sales area, shipping point, plant, excise group, series group, select "B" under the tab "Export", so that all your exports will go under Bond by default.
    thanks
    G. Lakshmipathi

  • SED and ECS value not shown in capture excise invoice

    Dear All,
    During  MIGO,  in the excise Invoice tab, the value for SED and ECS remain blank after capturing the Excise invoice. all the relevant conditions are maintained. what must be missing? please guide.
    Regards,
    Jay

    Hi,
    Her you need to check few settings 
    1.SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings -> Maintain Excise Registrations
    here make sure you have activated SED for your Excise registration
    2.You have maintained  excise defaults in
    SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings ->Determination of Excise Duty ->Maintain Excise Defaults
    here maintain all entries for SED condition(JSOP)) ,SED set off(JSX1) same for Ecess for your tax procedure
    3. Finally you have maintained A/P Set Off conditions for those SED (like JSX1) and for ECS set off in PO with 100%

  • In display Migo - Excise Invoice tab disappering

    Hi,
    I have posted the migo with excise invoice tab (capture and post) and i saved the doc.. after that , when i want to display the mat doc, that time the exice invoice tab is disappering. Pls advise what will be the issue

    Hi
    Latest support package means the highest support package level given by SAP in market place for every release of SAP.
    How to find the highest support package level installed in ur system:
    In any SAP screen click on system on the menu and then click on status. Under SAP system data click on the componenet cversion details buuton.Here u can see the highest support level for all components.Check for the one that says SAP_APPL which will tell he highest level of support pack.
    THis varies from release to release. Check for urs and then check in SAP market place the level reqd for ur release and upgrade ur system.
    SAP_APPL 4.7   SAPKH47029 (support pach level 29)
    SAP_APPL 5.0   SAPKH50018  (support pach level 18)
    SAP_APPL 6.0    SAPKH60011  (support pach level 11)
    SAP_APPL 46.2   SAPKH60201 (support pach level 01)
    check the OSS notes 1079123 for more details regarding this.
    Reg
    Raja

  • Text is missing in migo - excise invoice tab

    Hi,
    I'm doing migo with excise invoice tab option, where on the left, there are options like, capture & post, part1 only, no excise entry .etc..
    In that area if i use F4 option,  i can see both the fields i.e field nbr as 01 and text as capture and post, after selecting, the screen shows only 01 and text is missing.
    pls suggest, how to get the short text in excise invoice tab.

    Kunal
    in our dev , it's working fine , but in prod. only we are geting such display. any idea?
    Edited by: sapjj jk on Sep 22, 2008 7:12 AM
    Edited by: sapjj jk on Sep 22, 2008 9:19 AM

  • "No Excise Entry" option in MIGO - Excise Invoice tab

    Hi,
    While doing MIGO for excise related items, in Excise invoice tab, various options are there based on the Excise Group settings. Apart from that, " 06 No Excise Entry" option is also coming.
    Client does not want this " 06 No Excise Entry" option in Excise invoice tab.
    How to remove this option, can any one please suggest the solution.
    Thanks in advance.
    Thanks & Regards,
    Gopi Chand

    Hi gopi
    Take help of ABAPER
    OR go migo screen, in excise invoice tab, select that field press F1, click on technical inoformation, click on Data element-J_1IEXCISE_ACTION click again J_1IEXCISE_ACTION then go to value Range screen here you get values in that screen you can delete this value or hide by click on confgure tab on right side,
    but here yoy requird Access key for change
    regads
    Vipin

  • The value of JMIP ( inventory BED) and SEcess( JSEI) is not flowing in MIGO

    Dear Friends,
    The Value of JEC2 is flowing in MIGO but the value of JMIP and JSEI is not flowing in MIGO excise invoice tab.
    Please suggest me the possible reasons.
    Regards,
    Balakrishna R.V

    hii
    Your requirement is for Non deductable or deductable duties ??
    If its deductible , then u shld not maintain in NVV in conditions .
    IF its non dedcutible then u have to maintain in NVV , then it won't show any break up duty calcualtion in MIRO.
    Ther in MIRO it will show u total amount it taken into account of materials i.e , inventory account .
    Hope it'll help u .
    IF not revert with detailed process how u r doing with procurement type .
    Thanks

  • BED ECS AMOUNT IN MIGO HEADER IN LESS BY 10 TIMES

    Hi Guys,
    When I am processing the MIGO, in exise tab(Header/item) the amount of BED and ECS are 10 time less than the actual amount. Where as the Item details Excise tab it is correct as per the Purchase order.
    Can some body tell me how/from where this header amount being calculated or flowed.
    Thanks
    Dhananjay

    Please check the Basic Price Unit of Measure in PO conditions and check UOM if manual excise duty.
    Regards
    Bhavesh Mistry

  • In MIGO Sec cess Field hidden in Excise item Tab

    Hi Experts,
    We have a problem when we post excisable migo, Sec Cess Field is hidden. But BED and ECS field is clearly visible. What should we do. Resulting when we want to change SECESS we can not change it.
    Please help what should we do.
    GR.

    Hi,
    Ask u r ABAPER to make screen changes in prg SAPLJ1IEXGM , screen no. 220
    Rgds,
    Vikas

  • SEcess not appearing in MIGO Excise tab

    Dear all Guru,
    while making GR BY MIGO n also capturing exice
    but BED AND ECS value are getting filled up properly as required but not the SECess
    and PO is shows proper calculation as required.
    Pl suggest.
    Regards,
    Vimlesh

    hi
    is the field is appearing there ?or only value is not updating
    field is not appearingthen
    plz refer note no  926707
    if the field is not updating then
    go to
    spro>log gen>tax on goods movemnt >basic settings>excise registration
    here select ur registration and tick lible for AT1
    also check
    spro>log gen>tax on goods movemnt >basic settings>Determination of Excise Duty>Maintain Excise Defaults here check for field AT1 u have maintained the condition of ur 1% cess
    regards
    KI

  • Excise Invoice Tab Page/ Document Info  Tab Page is not appearing in MIGO

    Dear Friend
    For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
    In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
    Thanks
    Chandra

    Hi
    I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
    Thanks
    Chandra

  • MIGO -Excise Invoice diaplay mode

    Hi Experts
             In MIGO, Excise Invoice tab is displayed during the Creation Mode, but in the MIGO display mode the Excise Invoice tab is not displayed, what could be the reason pls suggest me.
    Regards
    Rajaram

    hi Raja,
    check out this.
    the Transaction Code for INVOICE (DISPLAY MODE) in Material Management
    MIR4 - Display Invoice document
    go there and do some changes.
    cheers,
    hema.

  • MIGO - EXCISE TAB NOT DISPLAYED

    Hi Experts
    In MIGO, Excise Invoice tab is displayed during the Creation Mode, but in the MIGO display mode the Excise Invoice tab is not displayed, what could be the reason pls suggest me.
    Thanks in advance.
    Regards
    Rajaram

    Hi,
    Check whether SAP Note 1079123 - Missing Excise tab in MIGO is applied properly or not?
    Symptom: - In Transaction MIGO, in case of goods receipt with excise,Excise Tab forthe corresponding material document is not displayed from Release 470 andabove.
    Solution: - Please apply the code changes as specified in the note.

  • ECS and SEcess field missing in Excise Invoice Tab in MIGO

    What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO.
    Went through few threads but was unable to get a solution......

    HI,
    In SPRO-Logistic general-Tax on goods movement-India -Basic setting-Maintain excise registration
    here check your for excise registration number  you have mark check for for cess and AT1
    it should be there
    second check you have maintain 100% setoff condition in your PO for same condition
    Regards
    Kailas Ugale

Maybe you are looking for