BED and SECess not flowing in ARE-3

Hai Gurus,
BED & SECess percentage and values are not flowing in ARE-3 .....
For Export and Deemed export same pricing procedure.
1.In Export Invoice all values are flowing same way ARE-1 also same values are appering why not ARE-3
2.Condition record 357 already is there.
3.J_1IEXCDTL table is updating after excise invoice with BED ,ECess & SHEces percentage with amount.
4.Note already applied userexit J_1I7_USEREXIT_DUTY_IN_EXPORT
5.Default condition types are there in JINFAC
6.Upto excise invoice all values are coming when I raise the ARE-3 that time only BED,ECess perecentage and value not flowing.(Excise base value is coming in ARE-3).......
Anything missed........please give any solution...........
Thanks
Sree

Check-
- whether you maintained Cond category - H ( capital H only) in your price cond type.
- J_1IEXCDTL for Excise Base amount flowing are not?
as per your thread, you have done req'd settings.
try with the above n revert

Similar Messages

The value of JMIP ( inventory BED) and SEcess( JSEI) is not flowing in MIGO

Dear Friends,
The Value of JEC2 is flowing in MIGO but the value of JMIP and JSEI is not flowing in MIGO excise invoice tab.
Please suggest me the possible reasons.
Regards,
Balakrishna R.V

hii
Your requirement is for Non deductable or deductable duties ??
If its deductible , then u shld not maintain in NVV in conditions .
IF its non dedcutible then u have to maintain in NVV , then it won't show any break up duty calcualtion in MIRO.
Ther in MIRO it will show u total amount it taken into account of materials i.e , inventory account .
Hope it'll help u .
IF not revert with detailed process how u r doing with procurement type .
Thanks

ECS & SECess not flowing in Producion

Hi
For first stage Delear I've raised PO in Quality client, made MIGO by checking MRP indicator and Posted excise invoice. During MIRO the Excise duties (BED, ECS & SECess) are flowing and I can able to post it correctly.
But the same scenario has been made in Produciton, all the condition type, J1ID are maintained similarly both in quality and Prdn, now if I am doing MIRO in production only BED is Flowing corretly, other two components(ECS and SECess) are not flowing kindly tell me where I need check for it.
Rgds
Srini

is sytem showing diff in the posting at MIRO ?
if so then check the OB40 settings.
If not
check in maintain Excise defaults u have maintain the condition for Eces and HEcess.
regards,
sujit
Edited by: SNB on Sep 30, 2008 2:07 PM

Excise Duty Base Amount not flowing into ARE -1

Dear Friends,
While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1
thanks
Sasi

Dear Lakshmipathi,
Earlier Liable to AT1 is ticked but not Indicator NCCD,I have checked after ticking the NCCD as well....
In my pricing procedure i dont have the NCCD condition .....as its not required.
In classify consditiontypes: I have maintained PR00 condition type as well along with Excise condition types...Do i need to maintain this PR00 anywhere else
or
Is there anything I need to do with the assesable value.......if so how should be the entry like in the pricing procedure?
Can someone please provide me the solution...its very urgent
Thanks
Sasi

Service entry sheet quantities and UOM not flowing into accounting document

Hi All,
I have a problem at the moment where the quantities and unit of measure entered in a service entry sheet, are being changed to '1 ACT' for all line items in the accounting document. We would like the real quant /UOM to be transferred here. We have tried using BADI AC_DOCUMENT_QUANTITY_GET but this is only affecting the first line item, and the rest are still 1 ACT.
Any help would be great!
Ryan

not solved.

When i try to install new software on my macbook pro it asks me for a password and i enter evry password i know and theyre not working. what are my options?

Thnx for any help.

Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities > Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A “Reset Password” window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled “Select the user account” if not already selected.
Follow the prompts to reset the password.
Select Apple menu > Restart from the menu bar.

Suddenly, my site safety (and do not track) features are grey; site safety is no longer a green shield w/ a checkmark-but grey w/ a ?

I use a paid-version of AVG;
Suddenly, my site safety icon is grey w/ a white question mark; instead of its usual green (shield) w/ a white check mark----
Have you any ideas ???
for help??

A number of added toolbars have been known to cause issues
with Firefox. Sorry to say that AVG is on the list.
Open the add-ons manager, and disable AVG as a test.

Excise not flowing from J1IS to MIGO

Hi All
While Stoch Transfer, in J1IS we give excise and document created while doing migo only base value is flowing BED ECS SECess not flowing ,what to do to get excise to flow directly without manual entering in migo.kindly help me in this regard
regards
kumar

Hi,
Pl. refer following thread for STO Process, hope it will help you.
[STO Process?]
[STO process]
Regards,
Vikas

BED NOT FLOWING TO EXCISE INVOICE J1IIN

HI SAP GURUS
can anybody help me the bed value is not flowing from invoice to excise invoice ecess,hecess,is coming properly we are using taxinn procedure i checked in excise defaults there it is jexp only i also assigned ett to concern gl accounts and i assigned jexp in classify condition types to zinfac to jexp.one thing is we recently changed taxinn to zaxiin.

IMG->Logistics general->Tax on goodsmovements->India->Basic settings->determination of excise duty->Maintain Excise defaults. Here you maintain your excise condition types.
Check whether you maintain G/L accounts for your transaction types just under excise acoounts for excise transaction.
Regards,
Deepu Pillai

Excise value not flowing in MIGO

Dear All,
While doing MIGO, the Excise value for BED, ECESS is not flowing but the values are flowing in Purchse order. But the SECESS alone is flowing in both PO and MIGO.
Points will be rewarded.
Thanks in Advance
Regards
Dhinakar

Hi raja,
h r u???
I have maintained all the settings, i thuink some note has to be applied. I will check it...
Thanks for ur Support
regards
Dhinakar

Basic Excise duty not flowing in Purchase order

Hi,
We are using TAX INJ and in version 4.7E. BED Percentage is not flowing in Purchase order, whereas E.cess andSEcess is flowing in PO.
We have checked all the settings and also the replies in SDN forum on this issue. COuld anybody add further inputs where to check for this issue.
Please revert
Regards
Uma

Hi,
First check the Tax Code in FTXP whether 100% is maintained for condition type JMO1 or not? If not then maintain
Also check following in J1ID;
- Chapter ID
- Material & Chapter ID Combination
- CENVAT Determination
- Plant Excise Details
- Vendor Excise Details
- Excise Tax Rates
If it is OK then check in SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults > Assign condition type JMO1 under column A/P BED cond.
If all above are OK then go to OBQ1 and for condition type JMO1, check the access sequence, it should be MWST. And then in FTXP, maintain 100% for condition type JMO1.
And then check in PO.

Export proces( is BED and ECS come in the Billing).

Hi,
Iam implementing the Export sale in my Company.My doubt is shall we take the BED and ECS in the Excise Invoce?
Here my client using the excise process under BOND. Wt are the pre requisits required?
regards,
jyothi.

Dear Jyothi
For excise purpose, in export billing, the value of BED and ECS should flow. Based on this, when you create excise invoice in J1IIN, the respective values will be captured.
To process Exports under Bond, in IMG you need to set the following settings. Logistics-Execution --> Tax on Goods Movements --> India --> Outgoing Excise Invoices --> Maintain Default Excise Groups and Series Groups.
Here for the combination of your sales area, shipping point, plant, excise group, series group, select "B" under the tab "Export", so that all your exports will go under Bond by default.
thanks
G. Lakshmipathi

"Scene", "Description", "Comment", and "Log Note" metadata fields don't appear in Prelude

Can I use the "Scene", "Description", "Comment", and "Log Note" metadata fields in Prelude that are basic parts of Premiere's logging screen? I can't find them in Prelude.
I would like to continue in the Premiere (CS6) workflow I have been using of adding a Scene, Description, Comment, and Log Note. These are front and center in Premiere for logging. Yet, nowhere to be found in Prelude. As far as I can tell, all of the rest of the metadata categories will transfer. It seems that these should be in the "basic" group in Prelude, but don't appear.

I have a similar problem, but it gets weird.
I have been very very happy with the whole 'cloud' computing thing and keeping my stuff at Google. Contacts and Calendar worked flawlessly since I bought the Pre.
However, last week, I had to do a full erase of my Pre (UK-O2) because no apps would install.
I logged into my Palm Profile on the phone; logged into my Google account just after, and checked my Calendar and Contacts.
Calendar - all fine, just a few cosmetic tweaks of the colours. Good.
Contacts - not fine. Only 19 of 58 were imported from Google, and none of them had their photos. So I hit the Sync Now button a few times - with and without WiFi - with and without 3G - but that did not help.
So I waited for it to do it itself. No change.
So I did some searching on the web. I checked that all the contacts were in 'My Contacts' at Google... yes. I removed the Google Contacts account from the Pre. Then added it back again.
Weird bit coming up.... exactly the same 19 contacts were added as before!
I am at a loss really. I have even tried creating a 'googlemail' account because a web page suggested it and logging in with that.
No change. Still 19 contacts not 58.
Also, I cannot add a contact directly in the Pre and have it whizz off to Google HQ like before. This now does not work.
H E L P !
********* I will try the suggestion above and report back soon ******
Paully

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

USB FAT32 is read only and will not format

My usb is formated as FAT32. however it is read only, and will not format. here are some screen shots:
http://gyazo.com/369a6b843d86ba0bcbd360ed89ea258c
http://gyazo.com/f07905c5b27519cbefbab29719c88702
http://gyazo.com/40d291c83b85e88c68ccc47a45b19f35
http://gyazo.com/490462fb7b280be7483048b2e485b2b8
not really sure what is wrong with it, any one have any suggestions?
i mean it cant be trash now, there has to be some program that will fix it.

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

BED and SECess not flowing in ARE-3

Similar Messages

Maybe you are looking for