BED,ECS and SECess value not defaulted in J1IS for return purchase order.

1)I have created return purchase orde for an excisable material.
2) In the purchase order i am able to view the BED,ECS and SEcess values.
3) I have created MIGO, for the return purchase order with excise as part 1 only.
4) While doing J1is or the 161 material document number, the BED, ECS and SEcess values are not defaulted.
Kindly help me to solve this issue.
Regards,
jayakumar

Hi,
Check the settings in
Tax on Goods Movements  --> India --> Account Determination
Specify Excise Accounts per Excise Transaction - Check for ETT OTHR
OTHR          CR Credit     PLAAED PLA AED account
OTHR          CR Credit     PLABED PLA BED account
OTHR          CR Credit     PLAECS PLA ECS Account
OTHR          CR Credit     PLASED PLA SED account
OTHR          CR Credit     RG23AED RG 23 AED account
OTHR          CR Credit     RG23AT1 RG 23 AT1 Account
OTHR          CR Credit     RG23BED RG 23 BED account
OTHR          CR Credit     RG23ECS RG 23 ECS Account
OTHR          DR Debit     MSUSP CENVAT suspense account
also check for Specify G/L Accounts per Excise Transaction
Regards,
Vikas Mayekar

Similar Messages

  • ECS Value not defaulted in J1IEX for Import PO

    Hi,
    I have raised import purchase orders. After BOE, i am trying to capture excise details in J1IEX. CVD,SECess,AED values get defaulted. But ECS value is not updated in J1Iex.
    Please help me to sort this issue.
    Regards,
    Jothi

    Hi Jothi..
    Can you brief the steps that you did sofar..
    I am also having the same case and i didnot get the default values in J1ieX even...
    Iam getting all the values defaulted in MIGO.But i want to capture that in J1iex only.
    But you jus check whether you are getting the values defauleted in MIGO first..if not chk the configs at "Tax Defaults".
    Thansk
    R.Kannan.

  • Ecess and SEcess value not displaying in PO

    Dear Experts,
                             in PO the BED is displaying correctly but Ecess(JEC1) and SEcess(JSEP) value its not displaying in PO  ,were could be the problem?
    regars
    rj

    Display the condition record maintained.
    There are two fields namely Valid from and valid to.
    Please compare these dates with PO creation date. PO creation date must lie within these validity periods maintained.

  • Can we have -ve freight value for return Purchase order

    Hi All,
    we have a scenario for returns PO where we need to reverse the freight.
    Please suggest if SAP supports this in standard,
    We tried to influence it though condition routine, but the value get updated in table KONV without negative sign.
    Please suggest.
    Thanks and regards,
    Vithalprasad

    Dear Umakanth,
    I'm actually struggling to solve this issue that you've discussed here. Because the vendor is agreed to allow us to reclaim the freight charges. Our user is requested to show the "freight charges return" in the "PO return". I've tried couple of ways to work on the condition type. But, it doesn't give me what I wanted. e.g. The amount for the cost of material to be returned is $100 and the freight charges is $20. We are actually expecting to have the PO return's total net value at $120 instead of $80. However, no matter how I tried, the system either give me $80 or if I managed to enter and got the value at $120-, but the system will throw me an error message of "PO item does not accept any negative value for delivery cost".
    What should be the right way or the best practice to handle this issue?
      1. Shall I enhance any specific characteristic in the condition type? or;
      2. Shall I create another PO line item purely for the freight charges (reclaim)? If so,  
          shall I post to item category "K"? or;
      3. Shall I let the FI to handle the credit memo manually (meaning the freight charges do 
          not capture in the PO return at all)
    I'm so sorry to disturb you via your email. However, I'm new to this forum and I finally found your valuable recommendation to one of this question. I do need more info on your suggestions urgently.
    Thank you so much for your time. Appreciated.
    Regards,
    Edwin Fu
    [email protected]

  • ECS and SECess in J1IIN

    Dear Experts,
    For Domestic sales Value of ECS and SECess is captured in J1IIN.
    But only for Export Sales ECS and SECess is not reflected in J1IIN.
    Kindly advice.
    Regards,
    Prashant.

    Check these threads
    [Re: Excise Values Not Flowing in J1IIN-(export Excise Invoice)    |Excise Values Not Flowing in J1IIN-(export Excise Invoice)]
    [Re: excise invoice with ref to proforma invoice  |excise invoice with ref to proforma invoice]
    thanks
    G. Lakshmipathi

  • Ecess and SEcess Condition not getting

    Hi all,
    Condition type for Ecess and Secondory Ecess not viewed at development server,i.e. Ecess cond: Jecs, Jec1, Jec2, Jec3.., SEcess:Jhx1, Jhx2...are Standard condition or We have to manualy create this condition.
    If this is a standard condition then how we can get this condition,is there any specific patch we have to upload? Which is?
    Kindly provide the solution ASAP.
    Thanks & regards
    Sanjay L

    Hi follow the steps mentioned below to configure the same.
    PROCEDURE: Initial Steps
    Create two new Tax conditions: JA1S, JA1I. Steps for creation of Tax Condition is illustrated below
    1.     JA1S must be a copy of JEC1
    2.     JA1I, a copy of JEC2
    3.     The text for JA1S - A/P SECess for Setoff
    4.     The text for JA1I - A/P SECess for Inven
    5.     Create a new tax posting key VS1.  The path for this is:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
    6.     Assign a new G/L account to the tax posting key VS1. in the following path:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting  Define Tax Accounts
    7.     Assign the posting key VS1 to the tax condition JA1S in the tax procedure as given in the screen shot below.
    8.     Assign tax posting key NVV (already existing) to the tax condition JA1I.
    The tax procedure should look as follows (with these two new tax conditions):
    PROCEDURE: Additional Steps
    u2022     The new step is for the condition JA1S and this is computed with the value in step 222(Sub total of all excise duties excluding ECess ) as the base.
    u2022     Another new step is for the condition JA1I and this is computed with the value in step 223(Sub total of all inventorized excise duties excluding ECess ) as the base.
    GENERAL PRECAUTION
    1.     Please note that these steps need not be the same in your tax procedure.
    2.     This is merely an illustration of the logic to be applied.
    3.     These changes will enable computation of taxes in the PO/SA, and in posting the Goods receipt with the inventory considering Secondary and Higher Education Cess too.
    4.     These changes are for Domestic Purchase Orders ONLY.
    With these changes in place, run transaction FTXP. Choose the relevant tax code. Enter 1% as value against the tax conditions JA1S or JA1I in the tax code. Illustrated next page is a sample tax code for easy understanding:
    Account Determination:
    Menu Path: SPRO Logistics u2013 General Tax on Goods Movements India Account Determination Specify Excise Accounts per Excise Transaction
    Add new Entry with GRPO transaction type and DC Indicator as Debit and Account name as RG23AT1 and PLAAT1.
    Repeat the same for all MM excise transactions.
    Menu Path: SPRO Logistics u2013 General Tax on Goods Movements India Account Determination Specify G/L Accounts per Excise Transaction
    Assign the RG23AAT1, RG23CAT1 and PLAAT1 GL account for the Excise Group and Transaction type GRPO and others.
    - Munna

  • ECS and SEcess field missing in Excise Invoice Tab in MIGO

    What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO.
    Went through few threads but was unable to get a solution......

    HI,
    In SPRO-Logistic general-Tax on goods movement-India -Basic setting-Maintain excise registration
    here check your for excise registration number  you have mark check for for cess and AT1
    it should be there
    second check you have maintain 100% setoff condition in your PO for same condition
    Regards
    Kailas Ugale

  • When creating a return by copying an order tax and charges are not defaulting?

    Hi,
    I have created a Return by copying sales order. But tax and charges are not defaulted from original sales order. Please note unit selling price is 0 for this item. I am using 11.5.10.2 version.
    Sales Order: 143674
    Item: UT1
    Quantity: 2
    unit selling price: $0
    Tax: $0
    Charges: $0
    Calculated price flag: Freeze Price
    But Return created as follows by using copy.
    Return Order: 6678
    Item: UT1
    Quantity: -2
    unit selling price: $0
    Tax: -$5
    Charges: -$20
    Calculated price flag: Partial Price
    Your help will be highly appreciated.

    Hi
    At sales order form, you select Action > Copy
    Change the order type to your "Return transaction type"
    Go to Line Tab
    Change the line type to Return type, enter return reason.
    Save
    This creates new RMA order.....this way this should copy the original tax amount.
    For the Charges part, check in the modifier definition whether "Include on Returns" is checked in the Discount/Charges TAB.
    Thanks
    -Arif.

  • What is Condition formula/call type/routines for ECS and SECess

    HI
    what is Condition formula/call type/routines for ECS and SECess (SECONDARY HIGHER EDU CESS) to assign pricing procedure
    JFACT.

    ECS reqt is 10 and a/c key os2
    SECess reqt is 10 adn a/c key os3

  • One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

    I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
    I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
    I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
    Windows 7 and iPad 2
    Kind regards,

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album.  It will chnage the order of the songs on the album, and I can not switch them back to the correct order.

    Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album.  It will chnage the order of the songs on the album, and I can not switch them back to the correct order.  This onloy seems to happen when I double-click on the song to play it in itunes.  If I just hit play, this doesnt happen.  As a result, I have several albums now in which the songs are in the wrong order.  Its very frustrating, as this error then transfers over to my ipod every time I sync it.  When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example).  But then the song will have placed by Itunes as #5 of 19 for whatever reason.  Itunes does not do this every time, but does it with enough frequency to be maddening.  Any thoughts?

    The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
    The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
    trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
    Back to how to re-link any de-linked tracks .
    There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
    at Dougs Scripts, there is one called iTunes Track CPR that might work
    http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
    or, if you just want a list of de-linked tracks, go to
    http://dougscripts.com/itunes/
    and find the script called List MIA's, this will create a text file listing all de-linked tracks
    if you review the thread at
    https://discussions.apple.com/thread/3633708
    also the thread at
    https://discussions.apple.com/message/17513078#17513078
    you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
    Good luck.

  • HT4847 my iphone storage is full and I do not have enough storage for upgrades or to take photos/videos, etc. My icloud is on for photos/videos. Can I safely delete them on my phone to make storage room knowing I can access them on my icloud?

    My iphone storage is full and I do not have enough storage for upgrades or to take more photos/videos, download apps, etc. I do have my photos/videos ON for icloud sync but not sure if I can safely delete them from my iphone to make room. And if I can delete them from my phone how do I access them on my icloud? I logged in for the first time and do not see where to access photos/videos?

    You can't just store photos on icloud.  They can be included as part of a backup or when using photo stream to sync photos from one device to another, but 1) photo stream keeps photos for up to 30 days after which they are deleted from the servers, and 2) never rely on a backup to icloud as a way of storing photos.  (When photos are deleted from the device, they are no longer on recent backups, and older backups get deleted in short time.)
    When it comes to photos, users should sync them to a computer for archiving.  Then they can delete the photos from the device, as the computer will have copies.
    Photos in backups on icloud cannot be viewed on icloud.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use.

    Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use. I don't have the app on my computer and I simply wish to have it on there to actually be able to transfer my files.

    You can transfer the app to your PC to save it, the article below will show you how:
    iTunes Store: Transferring purchases from your iOS device

Maybe you are looking for