BED,ECS, values not updating

Hi All Gurus,
Is any one did configuartion for CIN in version 4.6C. We are using the formula base tax procedure and TAXINJ.
The challange I am having is RG1 register update for all local sales as well as Export sales.
Both sale (export/ local) our values of (exbas) excise base amount does not get updated in table J_1IRG1.
Similarly , during the export under non bond its same, no values apear on the screen.
Can some one give me some hints/tips what all things I should check in configuration, or any things I have to set up if they are missing in our system.
Appreciate all of your solutions at the earliest.
rgds,
Shyam

Hi friend,
To update the RG1 register please note that the finished goods movement type need to be assigned.
Please navigate through SPRO>logistics general>India>Business transactions>Incoming excise invoice-->Specify which movement types involve Excise invoices.
Once you do that please also ensure the chapter ID in J1id whether the Rg1 register is selected.
Regards
Saju

Similar Messages

Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Subscription value not updated despite payment made days ago

Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account

Hello and welcome to the Skype Community.
You have totally different issues. ALWAYS start your own topic please.
1.0. Philippines Subscription.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

ECS Value not defaulted in J1IEX for Import PO

Hi,
I have raised import purchase orders. After BOE, i am trying to capture excise details in J1IEX. CVD,SECess,AED values get defaulted. But ECS value is not updated in J1Iex.
Please help me to sort this issue.
Regards,
Jothi

Hi Jothi..
Can you brief the steps that you did sofar..
I am also having the same case and i didnot get the default values in J1ieX even...
Iam getting all the values defaulted in MIGO.But i want to capture that in J1iex only.
But you jus check whether you are getting the values defauleted in MIGO first..if not chk the configs at "Tax Defaults".
Thansk
R.Kannan.

Letter of Guarantee Value not Updating with Payments

Dear Expert
The requirement from the user is that when a payment is made , the system should deduct the amount paid and refresh the new available value for the customer.
For Example : A Financial document is created with 1000 value . And Sales order created for 8000 . Therefore now the open value is 2000. This means that the customer can order goods worth 2000 only.
In the meanwhile the first order is delivered and billed . And the customer has paid 8000 when he received the bill. this means that now he has paid so he can now order more goods worth 8000.
but in the system it still shows open value as 2000 , although now that the customer has paid, it should be updated with the payments made so the value can be used by the customer that he had paid.
If any of you has any idea how to tackle this ( it works same way in credit management ) but not in financial documents.
we were thinking of another work around , i.e by closing the Financial document that has been paid and creating a new one by adding the remaining balance. i.e 2000+ 8000 , this way the customer can again use his value. but then how can we automate the system to alert the sales user that the payment has been made for a certain invoice for a certain LG.
your idea's and suggestion are highly welcome
Best regards,

Dear ATGSD,
The functionality in GTS is designed for modelling of a single financial document for which the initial value is not updated.
I understand your user's requirement, but surely that is dealt with simply by setting a credit limit in the SAP ERP system? There should be no need to use the GTS functionality at all. In the ERP system, the credit limit is updated by the account payments, exactly as your user requires.
Please let us know if that would work, or if there are more detailed requirements that are not apparent from your post - thanks.
Regards,
Dave

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Automatic Product Selection item value not updated in S067

Hello,
We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
The item category is marked as credit active. update group is 15.
If i do main item pricing then the value is getting updated successfully.
I check several notes but nothing helped.
Pls. help.
Regards,
Praveen

assigned it in sales order at item level in Billing tab
Assign the same at header level billing tab in sale order.
thanks
G. Lakshmipathi

Open order value not updated in F.35

Hi
While using item category Tas ( Third party item ) in Sale order, it is not updated in open order value at F.35.
please give your suggestions. thanks.
Regards,
Tirumal.R

1/ Check your credit control area settings
2/ Check your sales order config, if it works for one sales order type and not the other compare the two/

Invoice correction request (net value not updating)

Hi guys,
I have a problem when creating an Invoice correction request (RK).
When I change the Target quantity in the item (L2N), the Net value is not updated. So I have to go to Conditions and Carry out new pricing.
Any idea to fix this.
Best regards,
Eduardo

Hi Eduardo
Check the copy control VTFA , what is the pricing type it is being used and what is the quantity field maintained -ve or +ve or kept blank .
Even Go to item data->conditions tab and click on analysis you will know the problem why it is not changing the gross price
Regards
Srinath

Invoice value not updating for limit PO

Hi Experts,
SRM 5, SP 10 ECC 6.
Limit PO is created, invoice posted in ECC, the invoice vaue is not updating in the Statistics tab at item level of PO,Calculated Value is showing 0.00 only
any idea.
Thx

Hi David,
The problem is coming for limit order only, not for normal order and bbp_get_status is running fine for confirmation and normal po, so no need to run again

ITS templates - checkbox value not updated

Hi,
I am experiencing a problem with checkboxes in my Internet Service (similar to problem described in forum: checkboxes in ITS (again) ).
The checkboxes are inside a table (step-loop) and is blank by default. If the user selects the checkbox, the value is cleared after user input.
I executed the dialog program and it is fine.
The generated service template was modified to accommodate the step-loop. I'm using the SAP_TEMPLATE tags for the WEBGUI look & feel.
To set the checkbox parameter according to the user's input, should an if-statement be inserted in the code or should I use the parameter "onclick" with a javascript function?
I inserted an if-statement but it doesn't work.
Here's my code:
`SAP_TemplateTableBegin(title="Some title:", type="SAP_WEBGUI")`
`if ( IT_BEHAV-DESCR.dim > 0 )`
`repeat with j from 1 to IT_BEHAV-DESCR.dim`
`SAP_TemplateTableRowBegin(isSelectable="X")`
 `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `IT_BEHAV-DESCR[j]` `SAP_TemplateTableCellEnd()`
 `if (IT_BEHAV-SELECT[j].selected)` checked `end`
 `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`")` 
 `SAP_TemplateTableCellEnd()`
 `SAP_TemplateTableRowEnd()`
 `end`
 `end`
 `SAP_TemplateTableEnd()`
If the check on the value of the checkbox is performed within SAP_TemplateSimpleCheckbox tag (e.g. `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`", "`if (IT_BEHAV-SELECT[j].selected)` checked `end`"
)` ),
the checkbox values are still not updated.
My Business HTML and Javascript is not very good, please help.
Your assistance will be much appreciated.
Regards
Liza-Marie

Hi,
I tried
`if (IT_BEHAV-SELECT[j]=='X')`checked`end`
but it is still not working. I am not sure where it should be inserted...? I added it inside the checkbox tag as follows:
`SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`", "`if(IT_BEHAV-SELECT[j].selected)` checked `end`")`
as well as before and after this tag, without results.
The tag SAP_TemplateSimpleCheckbox has the parameter onclick. I suppose this can be used to call a javascript function to control the checkbox values. I'm currently investigating this option, not that my javascript is any good!
If the input fields of length 1 is used inside the loop, would it still work like a checkbox? I mean, can the user input any character? Do you perhaps have example code for this?
Unfortunately I cannot debug on the ITS at this stage since I dont have access to the ITS server and it would take too long to get access or arrange for debugging to be set up.
Thanks for the help so far!
Regards
Liza-Marie

Values not updated in CRM ,CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile

Hi All,
We are unable to make changes in CRM
Implemented the Change BADI CRM_BADI_BUPA_MOBILE_CHANGE (For language and timezone fields).
please check my previous post.
Implementing CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile
On mobile made changes for these fields ,checked in DOE ,CE structures ,they are not updated with new values.
checked the FM CRM_BUPA_MOBILE_CHANGE ,BADI is getting triggerd.
How the dat flows ..mobile->doe ->crm ?(for update values)?
Thanks,
Anitha.

Hi siva,
Thanks for the information.
data : ls_address TYPE bapibus1006_address,
CALL FUNCTION 'BUPA_ADDRESS_READ_DETAIL'
      EXPORTING
        iv_partner           =ls_ce_bupa_hdr-partner
        iv_xaddress           = 'X'
      IMPORTING
        es_address            = ls_address
      EXCEPTIONS
        no_partner_specified = 1
        no_valid_record_found = 2
        OTHERS                = 3.
loop at ce_bupa_header into ls_ce_bupa_hdr.
    IF ls_ce_bupa_hdr-FIELD_NAME = 'LanguageKey'.
      ls_address-languiso = ls_ce_bupa_hdr-FIELD_VALUE.
    elseIF ls_ce_bupa_hdr-FIELD_NAME = 'ZTIME_ZONE'.
      ls_address-time_zone = ls_ce_bupa_hdr-FIELD_VALUE.
    endif.
      endloop.
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
EXPORTING
     IV_PARTNER                      =ls_ce_bupa_hdr-partner
      IV_PARTNER_GUID                 =
      IV_ADDRNUMBER                   =
      IV_ADDRGUID                     =
IS_ADDRESS                      =
       IS_ADDRESS_X                    =ls_address
      IV_DUPLICATE_MESSAGE_TYPE       =
      IV_ACCEPT_ERROR                 = ' '
U mean to say this?.
Will try executing and come back.
Thanks.
Anitha.

Values not updating in PCA

Dear All,
Here i need small clarification on PCA. in my scenario(ECC 6.0) the balance sheet items(g/l's) the amount is not updating in PCA tables (i.e GlPCA) it means line in 2nd line item value is not updating in totals table
Pls advise me
Thanks
Sudhan

Hi Sudhan,
Please refer to the note 180906 for Balance sheet accounts whose balances are transfered periodically to PCA. In such case,the update logic for total table:GLPCT and line item table:GLPCA is as
explained in the note. And if you drill down in such total bal report: i.e. 8A2N,the line items are different with the total amount.
regards
Waman

VALUES NOT UPDATED IN EXCISE INVOICE

hi gurus ,
well all the settings to my knowledge are correct for CIN customization , but the excise values are not updated in excise invoice .the values are 0 " . can ne1 pl help ? dts top priority .

Hi,
Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
It will update both the data in the register
Rgs

BED,ECS, values not updating

Similar Messages

Maybe you are looking for