Bedside Mode

I'm enjoying the Q10 but am truly annoyed by some missing features. In my Curve, Tour & Bold over the past 10 years I could set the hours for Bedside mode & coincide with charging. Now I have to remember to do it manually every night. Why was this not included in BB10?! Also, why does the volume stay the same in Bedside as it does in Normal when it appears you can set them separately?!

Perhaps that feature will return, but for now, you do need to touch the Settings > Alarm and swipe down from the top for BedSide mode.
There is a setting within Bedside mode to allow PHONE ONLY while in bedside mode so as to mute all other notifications (like email, SMS, etc). Would that help you?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Is there a way to automatically set Google Talk to idle or offline in Bedside Mode?

On most phones, google talk (or rather, Google Hangouts usually) goes idle automatically after a certain amount of time, or at least when the phone is in some sort of "sleep" mode. I can't find out how to do this with Google Talk on BlackBerry 10. Basically, I want Google Talk to either automatically go offline or at least to automatically go idle while in Bedside Mode, or just to have a time-out when I haven't been using it for a while. Is there any setting that controls this in Google Talk, or any third-party App that adds this functionality? It's basic enough that I'd assume someone has done it.

which LiveCycle? can it be done in ver.7?
if yes-how?

Battery drain from Bedside mode

Hi, I've encoutnered battery drain before with programs and OS updates. I've done resets, reboots as well as battery reinserts. My device seems to be stable after 10.3.1. I had WiFi, Network and blend, and power saver on at 5% battery. I wasn't using the phone but just used the Blackberry blend software on other ohter devices to check emails. The battery lasted about 4-5 hours before it finally powered off. When i put the phone with the same options but in Beside Mode and did a lock to clear the active use of the display. Apart from Blackberry Blend being off and showing as such in Quicks ettings. The battery drain went down 97% to 74%. By the device manage the battery went down over 2% every hour in a standby mode, where compared to out of Bedside mode with blend on it was 1% an hour. No programs really stand out as causing drain nothing 10% or more since last charge before I put it into Bedside mode. Even normal standby mode with the screen off the battery drain is less. What could be causing this, anyone heard of sometthing similar.

the battery drain in the Night Mode is also happening to my leap device, with all the apps closed, and even Economic Mode activated. i try to figure out what is happening. I will come back if i find the solution. I am also looking for a Battery Saver app. I had a great app on my previous phone, an Android, but I still look for a similar app for BB10.

Media Card, Bluetooth and Bedside Mode.

Hi All,
I have a few questions please.
The first is I have loaded music onto my Z10 but I want to transfer it from my device memory onto my media card but I cannot find how or where I go to do this.
The second is I have connected the phone to my bluetooth system in my Ford but after playing abut 6 songs the phone keeps dropping the connection, I am pretty sure it is the BBZ10 as my wifes S4 and my previous iphone 4s both work perfectly.
Thirdly is there any way that I can turn bedside mode off completely as for me this serves no purpose and how do I find what times that this activates and deactivates please.
Thank you in advance for any support that you can offer,
Ian.

IanZ10user wrote:
Hi All,
I have a few questions please.
The first is I have loaded music onto my Z10 but I want to transfer it from my device memory onto my media card but I cannot find how or where I go to do this.
The second is I have connected the phone to my bluetooth system in my Ford but after playing abut 6 songs the phone keeps dropping the connection, I am pretty sure it is the BBZ10 as my wifes S4 and my previous iphone 4s both work perfectly.
Thirdly is there any way that I can turn bedside mode off completely as for me this serves no purpose and how do I find what times that this activates and deactivates please.
Thank you in advance for any support that you can offer,
Ian.
For the music, the best thing to do is connect the device to your computer and the flash memory, as well as the SD card should show up as a drive and you can copy from one to the other.
Bluetooth with cars always gives unexpected results. There are so many cars and so many phones that to have them all work flawlessly is statistically impossible. What OS version is your Z10 on? You can look under Settings >About >OS
Bedside mode is only enabled when you manually enable it by sliding the shade down from the lock screen (when charging) or specifically turning it on.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Bedside mode not working

Hi,
Multiple times now I have been woken up by notifications on my phone. This is even though it is in bedside mode when I go to bed.

Hey macdian,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 software are you running? This can be found by going into Settings>About. Also when you place the BlackBerry Z10 into bedside mode, are you also charging the smartphone?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Bedside mode completely drained fully charged battery

I awoke this morning, waiting for my alarm to go off and low and behold, my brand spanky new Z30 was fully discharged, only the red battery of death symbol would come on.
Bedside mode activated, Hotspot turned off, pretty fancy red clock displayed before i fell to sleep.
Phone was not plugged in but was fully charged before entering bedside mode.
Any support would be greatly appreciated.
I hope this can be rectified as I have used this function with previous BB models and the short charging cable they supplied with the phone will not reach anywhere near my bed.

I like to charge while i am sleeping and use a longer cord ro extension cord to it
it might be that it can only support Video: Up to 12 hours and you reached a limit
My Z10 will only last about 5 hours if that in bedside mode
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

My Z10 automatically goes into bedside mode. Why?

My Z10 keeps going into bedside mode automatically and I keep missing calls and not hearing message alerts or seeing the flashing led . I found a temporary fix by restarting the phone or pulling the battery but it just happens again after several hours. This is getting very annoying! Is there anything that I can do to put an end to this? Or can I remove bedside mode completely? because I don't like it thanks

This just happened to me and more. It is definitley not BedSide mode . I know how to use it and do when in Bed .
I just happen to glance at my phone and there was an incoming call with no ring. ( My main volume and ringer volume are on high) I tried to answer and slide down the screen to answer but it would not answer. The hang up option was not there. Just he slide down to answer was now at the bottom of my screen. I tried to phone myself while this was happening and that call would not show up and on the sending phone it just rang and rang.
I ended up powering down the phone and all is good again.
Will watch for this again.
I have missed a few calls this week 2 of them I thought I should have heard, now I think it was this issue you mentioned.
Don't take life too seriously, You will never get out of it alive! ,
If I helped please Like me, If not ---------->
I have not failed. I've just found 10,000 ways that won't work. - Thomas Edison.

Bedside Mode stopped working / Clock won't kick in while charging

Hi,
I recently updated from the earlier factory installed 5.0 version OS to the latest one in my 8530. Every time I connected my BB to my computer the BB manager outputted an immense list of updates to be done so finally I did.
Now Bedside Mode stopped working automatically. I'll explain, when I plug in my phone for charging the clock will not kick in and start Bedside Mode even though it is selected in the clock options settings. Instead I have to manually start the clock and then select Bedside Mode from the menu.
Basically is not just the Bedside Mode is the clock all together because if I select just Display Clock the same thing will happen, when I plug in the phone the clock won't kick in.
Meanwhile if I have the phone plugged in and I select Bedside Mode, when I exit the options screen after saving, it will start bedside mode.
And the same thing happens in reverse, if I unplug the phone while in bedside mode, it won't stop, I'll have to manually exit the mode and the clock.
Any advice?
Did I miss to check something in some other settings screen?
Can the clock be reinstalled?
Is someone out there with the same problem?
I need HELP PLEASE!!!

Hi again
This problem started with an update. I suggest repeating the update:-
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
To erase all the data on your BlackBerry device, complete the following steps. This option is available with
BlackBerry Device Software 3.8 and later.
1. In the device Options, click Security.
If you are using BlackBerry Device Software 4.1, click Security Options > General Security.
2. Click the trackwheel and select Wipe Handheld.
3. Click Continue.
4. Type “blackberry”. All the data on the BlackBerry device is erased.
On some new versions of BlackBerry software, the menu navigation is slightly different.
1. Go to Options.
2. Select Security Options.
3. Select General Settings.
4. Click the Menu key.
5. Select Wipe Handheld.
6. Click Continue.
7. Type “blackberry”. All the data on the BlackBerry device is erased.
Launch the new Desk Top Software on the computer
1. Connect your device to your computer.
2. On the home screen of the BlackBerry® Desktop Software, click Update my device.
3. Do one of the following:
* To download an update, click Get update.
* To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
Ensure the new OS is the one you prevously downloaded.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Bedside Mode Interrupted by Security Lockout

I am trying to use my Tour in bedside mode, however the security timeout required by my it department interrupts the clock. After the timeout, the homescreen returns, locked and ready for a password and remains on all night. Is there a solution to this? I want the bedside clock to remain on despite the security time out?
Thanks

I think I found the issue, only somewhat related to Security Toolkit ...
[http://groups.google.de/group/comp.unix.solaris/browse_frm/thread/93f6231c5bdc8409|http://groups.google.de/group/comp.unix.solaris/browse_frm/thread/93f6231c5bdc8409]
I activated smserver and the drive now works...
LB

Bedside mode not fading

Hi,
BlackBerry OS 10.0.10.85
While charging
The back light won't fade completely on bedside mode
1st: is it normal?
2nd: if so, can I get the back light to fade completely?
Thanks for answering this post.

Yes that is normal. If the phone is plugged in, the screen will only dim, however if it is unplugged, the screen will eventually turn off to preserve battery.
Rad Systems apps on BlackBerry World
Follow on Twitter, Facebook or BBM Channel: C0006BB16
Tips to improve your BlackBerry 10 battery life (and avoid overheating)

Bedside mode when charging

Is there a way to stop the Z10 going into bedside mode when it is on charge, or otherwise to suppress the no notifications in bedside mode.
I don't charge my phone at night but during the day when I am working, but that means that currently when I'm charging the phone my notification are blocked (not even the red LED flashing)
Solved!
Go to Solution.

The Z10 won't automatically go into bedside mode when charging. It is done manually either from the clock app or with the bed icon at the top of the lock screen.
Rad Systems apps on BlackBerry World
Follow on Twitter, Facebook or BBM Channel: C0006BB16
Tips to improve your BlackBerry 10 battery life (and avoid overheating)

Z10, Alarm and Bedside Mode

Now I've been under the impression that unlike former Blackberry phones the Z10 uses it's Bedside Mode so you can use the Alarm, however I have the problem that the phone despite being in Bedside Mode will turn itself off during the night and thus I don't even hear the alarm. Only reason I've even woken up is my old phone's alarm. So is there something I'm missing or is my phone just messed up?

Z10 Alarm doesn't work when phone is turned off, so I put my phone into bedside mode to charge it overnight. However network provider (so I was told today by mine) push network updates out overnight. Could this cause your phone to reboot etc?
Anyway, if you dont apply the updates your Z10 will slow pushing emails, pulling browser pages, drop calls. If your phone is left on, even in bedside mode, then they wont be received/ applied.
ST options are get a separate alarm or leave Z10 on but (periodically, in the morning) remove battery and SIM, wait, put both back in (Z10 SIM "re-finds" the network, identifies and pulls the required network updates). Did it just now and Z10 a lot happier (probably result in more efficient battery usage also!).
A colleague has an iphone and noted the alarm comes on even when the phone is fully turned off overnight. Time to think about fixing this bug BB - negates the "benefit" of bedside mode cant have phone not performing well because of something like this?

No more Bedside mode or themes?

Like the others, I have installed the latest OS version...and now when I plug it in to the wall outlet, it doesn't go into bedside mode automatically (it can be done manually). But it will when I plug it into my PC. And on top of that, no more user created themes work. I use Theme Builder and once I install a theme, the phone will not charge AT ALL. I hope someone from the BB dev team gets us a fix for it soon.

Unfortunately, an old issue. See this post: http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8500/Clock/td-p/744365 on Page 2.

What is bedside mode on blackberry torch?

what is bedside mode on blackberry torch?

Turn on and set Bedside Mode in the Clock application
Have you read the posts you made yesterday in which you were directed to review these resources you might benefit from?
BlackBerry 101
BlackBerry Tips and Tricks
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Clock in bedside mode

Hi to all,
When i put my phone on bedside mode, the clock does not stay on, in the settings it says it stays on but very weak.
Thanks in advance.
Solved!
Go to Solution.

I test it on 9900 Bedside mode, It turns off automatically after about 30 seconds when not charging.

Bedside Mode

Similar Messages

Maybe you are looking for