Been having issues since I updated to the latest firmware on my Macbook Pro

Everytime I put my laptop to sleep, I have to manually go into network prefs and renew my DHCP lease even though it registers my airport. Also having issues with putting the laptop to sleep as well... sometimes it doesn't wake, sometimes the brightness level won't adjust for 20 seconds. Very odd. Battery life seems to have improved however... anyone else having issues? Anyone else have ideas on how to address the wifi issue I'm having?
Running 10.7.3 on my 2012 Macbook Pro 2.4Ghz i7.

Call AppleCare.
A number of people are having problems with iPads and imessage/Facetime not working anymore.
imessage and Facetime sign in activation error iPad ios8.1.2

Similar Messages

  • Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge

    Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge it then the white square reappears. I do not believe the squares are saved

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://forums.adobe.com/docs/DOC-2325

  • In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!

    In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
    Sorry for my bad english :S
    Please, please help me

    Contact the carrier.

  • I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I'd say your sister messed up and your iPod is toasted.
    Think about it...  She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer... 
    Also take into consideration how old is your sister, and how much does she know about electronics?

  • HT201364 is the latest mavericks not for Macbook Pro retina display?

    is the latest mavericks not for Macbook Pro retina display? i tried upgrading my latest macbook pro but unable too

    i just got a new macbook pro retina display - A1502. When i check about my os it dispalys -
    Software  OS X 10.9 (13A3028).
    So i went to the app store and tried downloading os x mavericks which is free.. then i get this message saying
    We could not complete your purchase.
    OS X Mavericks cannot be installed on this computer.

  • Since I update to the latest version of flashplayer my pdf file will not open. It keep tell me to update. How to resolve this problem?

    It is important that I am able to open my PBF FILE.  Error message up date to the latest version of flash player. I updated to the latest version and I am still, unable to open my pbf file. Any suggestion? I need to download a test.

    Please tell us
    1. What system you have (e.g Windows 7, Mac OS Mavericks...)
    2. What version of Adobe Reader you have.
    3. The exact wording of the message that you get
    4. The web browser that you use

  • My iphone 4 will not update to the latest firmware. How can I fix this?

    My iphone 4 will not load the latest firmware. it keeps timing out. How can I fix this? I am using Windows 7.

    Disable all Anti-Virus software & Firewalls & try again.

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Why does the back button not work since I updated to the latest version?

    I updated my browser to the latest version and now the back button doesn't work anymore. Is this just a glitch with my download or is anyone else having this problem.

    Hotels, hotels in cancun, hotels in the Mayan Riviera, hotels in Puerto Vallarta, Cabo San Lucas hotels, hotels in Playa del Carmen, horseback riding, groups and conventions, weddings and events, ritual feelings, transportation, car rental, sub aquatic museum, Mexican fiesta, luxury tours, boat share, spa center, packages in Cancun, relaxing massages, therapies balanced, facials, body treatments, tours in Cancun.
    visita ahora! http://www.cancun-hotel-tours.com

  • 10.5.8 update corrupted the Volume Structure of my MacBook Pro and iMac

    After installing the 10.5.8 update on my Macbook Pro AND my iMac, BOTH computers refuse to boot up. If I boot from a TechTool Deluxe DVD and run the system scan, It fails both the Directory Scan and the Volume Structure test. The only common application on these computers is the Fusion PC emulator. I was reading that the newest update fixed problems with this application. PLEASE HELP!!!

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Since I upgraded to the maverick system. My macbook pro will not read my USB pen. How do I sort this problem out

    Please can someone help!
    SInce I upgraded to the maverick system, my macbook pro will not register my USB anymore.
    Regards
    SP

    Hi,
    Are you sure you don't have unpluged it, without ejected it before?

  • Where can I download the latest video driver for macbook pro 13''?

    I have this game that I want to play but it won't start cos it says that I need the latest video driver. Btw, im using windows 7 64bit to run this game. Thank you.

    Here: http://www.amazon.com/Macbook-Silicone-Keyboard-Cover-Generation/sim/B0015UQMJM/ 2

  • Ive been having issues checking individual categories in the itunes store. All i get is a blank screen when I select a specific category. The only thing I can see is the initial apps store when I select apps. Whats going on?

    I get a blank screen in  my apps when I select a specific category in the app store in itunes. whats going on?

    The same for me.
    Bug is reproduceable.
    Greetings, Anakonda

  • Ever since I updated to the latest version of Premiere Pro my video is taking FOREVER (over 20 hours) to export.

    the video is only 20 minutes long. I've exported longer videos in less than 2 hours before so I have no idea what the issue is. The first time I tried to export this same video it started at saying remaining time was around 8 hours, went all the way down and finally finished and then said it there was an error in the export after 8 hours and the exported video wasn't there. So I decided to try the exporting process again, and last night before bed it said about 8 hours to export again. I just woke up and now it's still not finished (over 8 hours later) and NOW the remaining time is over 20 hours!!!! Does anyone else have these issues?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    What effect(s) are you using, and what is your export format?

  • Since I updated to the latest version of iTunes, I can't sign in to the Store.  I have checked my Apple ID/password and they are correct.  I have uninstalled and reinstalled.  No suceess.  What should I try?

    I have verified my Applie ID/password.  I have uninstalled/reinstalled iTunes.  No success.  What else can I try?  I can't dowload anything.

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

Maybe you are looking for