Been out of the loop of tech latley been in Afghanistan since september

Hello everyone I have been out of the loop of new phones and features for quite some time now and my upgrade comes around just before i get ready to come home from Afghanistan. So i have always been a fan of the Android phones and i know alot of new phones have come out latley like when i logged on i saw the Droid 4 i believe and was like when the hell did the Droid 3 come out? So i want to upgrade to a Android phone so any advice would be greatly appreciated on this one. Any comments on devices what you personally like about your Droid will be very helpful to me. Any glitches or anything that you know about on one you suggest. Thank you all i look forward to seeing what you all have to say.

"If I upgrade my itunes do I lose all my CD recordings? "
No. But you should always maintain a backup copy just in case.
" Why am I being charged for albums I have downloaded from CD?"
What are you talking about?
You only get charged for what you buy.

Similar Messages

I've been out of the loop - is there any hope for my Audigy 2 in Vis

Are they going to eventually come out with drivers that will make my Audigy 2 ZS Plat Pro fully functional again, so I can use all the ports and features again? Or are they going with X-Fi only now?
It would be a shame if I spent over $300 for a soundcard that would not even work with future versions of Windows
edit: Also, I'm running the Mar 07 driver pack off Creative's site. If you guys have any recommendations for any unofficial driver packs or anything to unlock more ability out of my soundcard, that'd be great. Thanks!

Yes. There is.
Step 1: Follow these instructions > http://nomoregoatsoup.wordpress.com/...tall-problems/
I recommend the Manual instructions. Driver Sweeper might not get it all because Vista will try to hold on to those files for dear life.
Step 2: Download the latest Drivers from here > http://forums.creative.com/creativel...essage.id=2700
They are not official releases but its just as good, if not, better than anything Creative has put out on its own.

Contacts error message--how do I get out of the loop?

Since the latest ML upgrade (10.8.2 12C60) was pushed to my MBPro (15-inch, Mid 2010, 2.53 GHz i5) this morning, I have been getting the error message "Contacts can't connect to the account <mail account name> Enter the password for user <username>". The message hangs from the top edge of the Contacts window. I have tried the password for the ISP mail account, the iCloud mail account, my computer user account, my keychain, my computer system administrator account, etc. I have tried pasting passwords copied from my keychain. The message keeps reappearing. The only way to get rid of the message is to quit Contacts. After about 20 password attempts, I get the message "The operation could not be completed. No other information is available about the problem." When I dismiss this message, I get the 1st message again. It is an unending loop. "Cancel" does not get out of the loop. Help!
Mail seems to work all right.

I also keep getting the error message "The operation could not be completed No other information is available about the problem" but only with Contacts (the address book). Mail is fine. I can not tell what operation it is referring to and have not found any problems with the contacts themselves yet. Its a concern, and annoying, but I can't say that its an actual problem for me. A glitch maybe?
I did have the problem you are having with mail some time ago, but after I deleted the accounts off of my mac and iphone, then set them back up from scratch it resolved the issue. I seriously hope I don't have to do that with contacts. It would make me very nervous.

The icloud keeps asking for apple id but cannot get it out of the loop

the icloud keeps asking for apple id but cannot get it out of the loop. It will not let me delete or get to settings

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

What would cause my iphone 5 (9months old) screen to bow out by the volume buttons? - never been dropped

I purchased my iPhone new in November. Recently it has been shutting itself off at random times. Registering that it needed to be charged although it had 50 -80% left on the battery. It was pointed out that the screen is bowing out by the volume buttons. After doing some research online it looks like an expanding battery. Has any one else ran into this problem? What would cause this?

hi,
i would go to the genius bar, thats definitely not a common problem with the iphone.
but lithium accus are known for such problems (e.g. model flight), they can expand when there is something not working well.
peter

List of MIGO document in which Excise have not been deducted by the user, which should have been deducted.

Dear All,
While doing MIGO, excise calculation is not been done by the users.
I want the list of document in which excise should have been done by not done by the users.
This would be the ABAP development but I need to know which table while give the correct information.

J1I7 standard report should serve your requriement. There are three radio buttons in the Selection screen. You will have to use them according to your requirement.
If you still want to go with Z report then have used the excise tables MSEG, MKPF, J_1IEXCHDR, J_1IEXCDTL, J_1IGRXREF, J_1IPART1 & J_1IPART2. You will find the entry in the Part1 table if Part 1 is updated and an accounting document in J_1IPART2 table if Part 2 is also posted.

Item value NOT useful out of the page where it's been declared.

Hi all...
I'm using Apex 2.1 (version embedded on 10gXE)
I'm developing an application where, on page 1 i define a hidden item named
P1_CLIENTCODE. The source value for that item comes out from a query like: "select clientcode from clients where username=:P101_USERNAME". On the same page (page1) i have a report region that
displays the client daba based on P1_CLIENTCODE "select...where clientcode = :P1_CLIENTCODE" and works ok.
But, when in a report region on page 2, i want to use a similar query "select...where clientcode = P1_CLIENTCODE", it doesn't work. There is no value stored on :P1_CLIENTCODE.
So, what i noticed is that :P1_CLIENTCODE value can be used only on page 1, BUT another thing i've noticed is that :P101_USERNAME is useful on everypage.
Why is it that P101_USERNAME value is useful on every page of the application and P1_CLIENTCODE only for page one? All attributes are the same for both items.....
Thnx all of you for your help.
fernando

Fernando,
But, when in a report region on page 2, i want to use a similar query "select...where clientcode = P1_CLIENTCODE", it doesn't work.
I assume you typed that wrong in this post and that your query references :P1_CLIENTCODE with the colon prefix on the item name. Even so, the query does not return the results you want.
1. The login page (101) generated by the create application wizard contains an after submit process named "clear" that clears session state for all items on page 101. So referencing P101_USERNAME on other pages will not work if this clear process is in place. But maybe you don't have that process. In that case, P101_USERNAME could be referenced throughout the application.
2. You may be having trouble referencing P1_CLIENTCODE on page 2 because page 1 was never submitted. Page 1 would have to be submitted (or you would have to take other measures) in order for P1_CLIENTCODE to be saved into session state for reference on pages other than during the rendering phase of page 1 (where it can be referenced).
Scott

IPod service error - been through all the steps in tech articles

Hi,
I bought an iPod nano for my wife (she uses Windows XP). She previously had installed iTunes on the computer (not sure which version) and it worked fine. We then used the CD to install the iPod software before trying to connect the nano for the first time. We've tried all the fixes suggested in article 93716, turned off virus software and reinstalled iTunes and the iPod software, all to no avail. When we open iTunes from the start menu with the iPod connected we get a message that says that the software to communicate with the iPod is not installed correctly and that we need to reinstall iTunes to install the iPod software. I suspect that having had iTunes previously installed on the machine before we installed the iPod software for the first time may have something to do with this. Thanks for any help or suggestions.

hiya!
I won't get a chance to try it until I get home tonight.
okay, i'd better give you some more references now then.
if you run into problems with the registry keys, with any luck some of the ideas in the ProgMan thread:
http://discussions.apple.com/thread.jspa?messageID=2143821#2143821
... or the hutch thread:
http://discussions.apple.com/thread.jspa?messageID=2261175#2261175
might be of some help with that.
love, b

Using icloud, is my macbook pro out of the loop?

want to sync my macbook pro with my other apple products now with icloud?

You can if it meets the requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Yes, if you have purchased Lion you can install it on the other computer. However, the other computer will first need to be upgraded to Snow Leopard in order for you to re-download the Lion installer.

There has to be a way to print the calendars from iCloud.. Am I out of the loop?

I know there is a way to do it with a screen grab and sizing your screen to show everything. That's not very Apple-esque though. Is there a better way?

Restore from iCloud Backup
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup
12. You'll be required to enter Apple ID and Password
13. Agree to Terms and Conditions
14. Select Backup file
15. You'll see progress bar
16. Red slider will appear; slide to unlock; step #1 to #16 is fast
17. Pre-installed apps will be restored first
18. Message: Purchased apps and media will now be automatically downloaded
19. You'll see a pageful of apps with Waiting/Loading/Installing
20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on).

How can I reinstall the earlier version that should have been replaced by the new version but has been wiped off of my 10.4.11 and left me with only sufari mac

I attempted to install the new version of Firefox as it would not load my Hotmail account. I clicked 'replace' only to be told the new version could not be installed; I now have no Firefox at all to run on my (10.4.11) Mac Book Pro.
Can anyone let me know if I can reload my previous version of Firefox to use for internet purposes?
Thanks.

Current Firefox versions require an Intel processor, which you have, '''''<u>and</u>''''' OSX 10.6, 10.7 or 10.8, you have OSX 10.4.11.
*OSX 10.5 and lower version numbers are no longer supported by Apple, you no longer receive stability or security updates from Apple, and using those old versions expose you to significant security risks online.
*Additionally, more and more software will not work with the old versions of OSX.
*See - https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
*See - https://www.mozilla.org/en-US/firefox/20.0/system-requirements/
One suggestion in the first article above is to continue using Firefox 3.6.28 (no longer supported) and could expose you to known security risks online while using Firefox 3.6.28. <u>All Firefox versions that will run under OSX 10.5 and lower make you vulnerable to attack by hackers when you are online.</u>
Your best option:
#upgrade OSX to 10.6 or 10.7 or 10.8
#<s>try using TenFourFox, a third-party build of Firefox for older OSX versions ('''''may not take away the associated risk of using the older OSX versions''''')
#*See - http://www.floodgap.com/software/tenfourfox/
#*Plugins not supported (extensions are supported), and there are options on this page as to how to install replacements for Adobe Flash and Quicktime, if you use those Plugins - https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported</s>

Can I get my text and voicemail on my email while out of the country?

I am out of the county already and have been wondering if I could access my voicemail and text messages from my computer or email. Is there any way? I have no service here at all but my iphone turns on just no verizon service.

Not that I am aware of

BPM: Loop condition not coming outside of the loop

Hi Experts,
I am working on BPM. In the loop I am giving the condition as
(ForSyncResponse./p1:MT_Test_JDBC_Req_response/row_response/Row/indicator u2260 9)
If indication not equal to the 9(Integer) then it should come out of the loop otherwise loop needs to be repeat( Iam getting this data from the database through Send Synch step). When ever iam sending data other than 9 then it repeating if I send 9 also even though the loop condition is not satisfying and its keep on repeating the loop. Can you please let me know what might be ther problem.
Thanks & Regards,
Purushotham

Hi Prasadh,
         I am able to give thie "Create the following expression in the expression editor:
/MT_Test_JDBC_Req_response/row_responseindicator != 9" expression
           How can i give the second"(/MT_Test_JDBC_Req_response/row_responseindicator != 9 EX)" condition??
          I tried with giving the AND but it is not allowing me to enter the 9.
     Can you please let me know.
Thanks & Regards,
Purushotham

Should the condition in the loop step

Should the condition in the loop step in the integration process(BPM) be = or not= ?I need to do the following>>perform certain operation only when the container value is less than 3 Else then get out of the loop.
Regards,
Mansi

The loop step in ccBPM implements a while loop.
So, while count not = 3, it will be executed.
Once the counter reachs 3, the loop will be terminated.
Regards,
Henrique.

In iPhoto the double click to enlarge a photo is now a ! in a triangle and I am Unable to print from iPhoto. This has just happened out of the blue.

Hi All.
In iPhoto I have lost the double click that opensup photos, the double click now appears as a ! in a triangle. At the same time I have lost the print facility in iPhoto. This happened out of the blue and I have been unable to reconcile either problem. Can anyone help please.
Bill

The ! means that iPhoto has lost connection to the origianl file.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Been out of the loop of tech latley been in Afghanistan since september

Similar Messages

Maybe you are looking for