Been reverted back to old profile system
Hi, just need a bit of info as to why ive been put back on to the old profile system, my hub as been syncing to my full line capacity for 3 days now, on the first day of the 3 days it started syncing at 14569kbps i was still on the new system wich gave around 12.6meg, day2 my speed dropped to around 11meg but my sync rate stayed the same, i did a speed test and found i'd been put on the old profile system and had 12000k, day 3 which is today im still on the old profile system, i cant do a speedtest at moment as its not working, but im still getting the same speed (around 11meg) on other speed testers but sync rate on my hub is still the same, have bt put me on the old system? if they have then why? i thought it would of changed it self back over night but i didn't happen. Does anyone know why its happened? as you can see it as re synced in the 3 days but rate stayed the same
ADSL line status
Connection Information
Line state
Connected
<script type="text/javascript">// function p_ajax_adsl_status() { ajax_download_start('adsl_status=1', p_ajax_adsl_status_cb); } function p_ajax_adsl_status_cb(xml) { if (document.getElementById('adsl_status').innerHTML != xml) { document.getElementById('adsl_status').innerHTML = xml; mimic_button('submit_button_ajax_refresh', 1); } else setTimeout('p_ajax_adsl_status()', 5000); } setTimeout('p_ajax_adsl_status()', 5000); // </script>
Connection time
1 days,
02:11:59
Downstream
14,569 Kbps
Upstream
1,166
Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex
A
Latency type
Interleaved
Noise margin
(Down/Up)
2.6 dB / 6.0
dB
Line attenuation
(Down/Up)
34.9 dB / 13.7
dB
Output power
(Down/Up)
22.0 dBm / 1.7
dBm
Loss of Framing
(Local/Remote)
0 / 0
Loss of Signal
(Local/Remote)
0 / 0
Loss of Power
(Local/Remote)
0 / 0
FEC Errors
(Down/Up)
28869 / 0
CRC Errors
(Down/Up)
18111 / 0
HEC Errors
(Down/Up)
97163 / 0
Error Seconds
(Local/Remote)
6846 / 0
Solved!
Go to Solution.
Hi thi post from one of the mods on another thread will explai to you just a matter of waiting for it to be restored
Hi Guys
This upgrade is only available on 21C, but only Huawei 21C MSANs (equipment situated in the local Telephone Exchange) currently support it. Exchanges with Fujitsu MSANs will get the upgrade as part of the second phase, and that is happening soon.
There are two clear benefits to the changes,
An improvement in the IP rate as it is much closer to the sync rate. For example under the new method a sync rate of 18000kbps equates to an IP profile of 15881kbps which is an improvement of 881kbps in IP throughput.
The other improvement is that there is no delay in uplift because this new process takes a different route to configure the BRAS IP profile system loading and volumes are no longer an issue and the BRAS updates with the new style IP profiles immediately.
However until phase 3, where our systems will be updated, some lines could benefit from the improvement only to be overwritten by the systems back to the old style profiles at a later date. This will be temporary until the systems have been updated where this issue will be rectified..
Cheers
Stuart
BTCare Community Mod
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
After making a new Illustrator file from an old one, then saving it as a pdf, the new Illustrator file reverts back to old one. I have been using the pdf to make the Illustrator file again (luckily I've saved it as editable) but I don't always want to add this extra procedure. Does anyone have this issue or any clues on how this happens and how to fix the problem?
when you made your changes and then saved as, you saved your changes to a new file. your original file closes without saving and the open file in illustrator is the new one (in your case the PDF).
evertime you save as you are making a new file without affecting the old file.
you should first save your changes and then save as. but after the save as, the opened file will no longer be the original file.
if you do a Save As Copy. then you will be saving a new file which will be closed and your original file will remain open. -
Reverting back to old layout - role comparsion RSUSR050
Hi Folks,
We have upgraded to ECC 6.0 and BW BI 7.0 . The SUIM transaction for role
comparison (program RSUSR050) has a new layout . compares the objects
in downward display rather than the old 2 column display. Is there a way to
revert back to old display layout ? - much easier to compare .Hi Dan,
if you have still an old system, you could take the old coding (also the includes SR050E10 and SR050F10) and copy it to a z-report of your own to get the old look again.
Nevertheless it is planned to deliver an improved design for the resultlist to make the comparison easier. But........ it is not clear until now, how long the realization will take.....
rgds, Bernhard -
Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.
YOu need to be clear about the products you are using, so we can help you. In particular there is no trial of Adobe Reader, it is free and keeps running. Sounds like you are using some versions of Acrobat - which?
YOu must properly uninstall the trial, don't just delete files or you may get a mess impossible to recover. -
Revert back to Old status if ticket results in error..
Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
In short please provide enhancement or routine or function module which can revert back to old status.Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
In short please provide enhancement or routine or function module which can revert back to old status. -
Change Outlook Calendar background color but its reverts back to old on restart
Dear Support,
I am trying to change Outlook Calendar background color but its reverts back to old on restartHi,
Let's take Outlook 2013 for example, go to FILE tab ->
Options -> Calendar -> Display options
-> Select the Default calendar color and the checkbox for
Use this color on all calendar ->
OK.
In case the Navigation Pane is corrupted, we may try starting Outlook with the switch "/resetnavpane":
Press Win + R and type “outlook.exe /resetnavpane” in the blank box, then press Enter.
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
Itunes can I revert back to old version
Don't like the new itunes can I revert back to old version.
I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again. -
Office 2013 contacts reverting back to old entries
Windows 7, Outlook 2013
I am logged into Outlook but updating my boss's contacts, which I have access to (his mail, contacts, calendar, etc.) which is a separate email/login from mine. I am trying to do a mass update of his contacts. When I enter new information into previously
blank fields and save, sometimes it saves and sometimes it doesn't. I keep re-copying and saving until it all saves.
Then today I come in, and all the updates I did yesterday are not there, the entries have reverted back to an old entry, hence fields like address which had an address are now blank.
We have 5 computers and 3 cell phones hooked up to my boss's outlook/contacts account.
Our IT co's response was they've never heard of this problem and will have to do trial and error.
My computer (and phone) have been newly added to my boss's contacts/outlook login as of 2 weeks ago, and there was never a problem with the other 4 computers and 2 phones before me. However for the past 2 weeks, Outlook has been doing
things like this, with both Contacts and Calendars (however Calendar seems to be stable now.)
I asked IT if possibly one of the devices was set as a master, so that when I update my computer, it's reverting back to the master entry, but IT's response was Exchange doesn't work like that. I unfortunately know very little about Exchange or networking.
I just
unchecked “Check for duplicates when saving new contacts” under Options/People, due to an article on Outlook 2010, but unsure if that has fixed the problem.
Does anyone have any recommendations as to how to fix this? Thank you.This is not normal behavior. When you sync with exchange there isn't a master, it uses the last update date to determine which is correct. It also creates 'conflict' copies if it's not sure which one is correct. It doesn't sound like its creating conflict
copies though.
What cellphones are you using? How do you sync - over the air, with 3rd party software etc. The problem might be with one of the phones or software, if using sync software.
Does it happen if you use safe mode? if so, an addin may be at fault.
Disabling the duplicate checker might help - but if so, you'll end up with duplicates.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
New contract, reverted back to old number?
Hi I received my new phone that was taken out in a new contract last Thursday. I wanted a new number to stop all the unwanted calls from my old number.
Therefore text everyone my new number... that came with the phone on a new sim card.
Today I have not been receiving any of my texts and sending texts keeps failing... I thought it was my signal, until I phoned a friend and she said it came up as my old number..
Can anyone advise me why a new phone and contract has reverted back to my old contact number?
ThanksIt looks like they have done this as an upgrade, I would advise you to ring EE and ask them to change your number to a new one, not sure that you can use the number that came with that phone, though.
-
Reverted back to old Os lost data
I have a g5 and i had osx 10.5 and need to revert back to 10.4 and i lost all my well everything pics music every ting is there any way to get it back or and i $%#%. any help would be great thanks
If you cleverly did an archive and install, then of course all your settings and prefs would have been saved. Look in Applications>Previous System and everything should be there.
-
DNS reverting back to old settings
We are in the process of upgrading our Active Directory to Windows Server 2008 R2, from 2003.
There is a new primary and secondary DNS that we're still in the process of changing across all servers and devices that require DNS settings to be specified.
It has worked successfully on most servers and devices, however on other servers, for example Unix and Linux type virtual machines the DNS reverts back to the old settings after they are changed resulting in the server continuing to query the old DNS server
and not the new one.
I've been through the forums to find the answers but haven't found a lot of matches and want to explore all possibilities as to why this could be happening from the 2008 AD perspective before looking at the OS level.
Has anyone come across anything like this?
I'd be most interested to hear how you fixed it and what the cause is.I am having this same issue within my organization. Some servers change while others don´t. What is unique about my situation is that it´s all Server 2003 physical servers, no issues with 2008 and any flavor VM. Here is what I´ve tried thus far on one of
the servers to attempt to remedy this but none of these have worked (for me at least):
In no particular order
Restarted the DNS Client Service
Did a full Virus/Malware scan
Checked for any applications that could be changing the DNS settings
Repaired NETSTACK
Installed updated network drivers
Changed the DNS settings with a local admin account (non-domain admin)
Applied a Flush DNS on all of the servers after changing to the new DNS settings
Removed the old DNS servers from the Name Servers tab in the SOA record in DNS Manager on the primary DNS server
Scavenged Stale Resource Records on both the old and new DNS Servers
I hope some of this info is helpful to you, I´ve combed the internet for any info on this issue but found very little. I also hope you find a fix! Peace. -
Data getting reverted back to old,BP transaction BAPI_BUPA_CENTRAL_CHANGE
Hi all,
I have written a piece of code which changes the BP transaction record say example i'm trying to change the last name of the BP I'm using BAPI_BUPA_CENTRAL_CHANGE function module and then commit statement which works fine, when i go to the BP transaction i can see the last name changed to the new name(which i gave in the program) but after few minutes the values are getting reverted back , the last name which i have changed is getting reverted to the old name.
When i check the change history then i can see the new value getting change to old value and i can see other user in created by field , can anyone help me out in this .
Thanks
BhavanaYes friend,
i do commit and i have seen the change in the change history and i see the changes are made, but after few mins i can the values getting reverted to old .
Thanks
Bhavana -
Can I revert back to old version of itunes from version 12
I use itunes version 12 and have a nano 7th generation. I recently upgraded my itunes to version 12 and have to say I don't like it. Can I revert back to earlier version and how do I know what version I used previously?
The main reason I would like to revert back is that I have encountered a problem that I never had previously with itunes. Upon purchasing a song, when I try to copy it to my ipod I am getting the following error message :
"(song name) wasn't copied to ipod because it is only available in icloud". Since when did I do that?
When I attempt to download from icloud I get the following error message "There was a problem downloading. You do not have enough access privileges for this operation".
What can I do now ?? Can I revert back and will this sort the problem?
Many thanksThe skin may never be made compatible.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
Polymorphic icon editor - reverts back to old editor
LabVIEW 2010 SP1
I have a set of polymorphic VIs that I have in a Instrument Library Project in the Public Folder.
When I try to edit the icon and select a Glyph to drag into the icon field LabVIEW reverts to the old editor!
This is really slowing down my productivity. Is there a way to fix this?
This also happens to non-polymorphic VIs Icon Editor.
Ryan Vallieu
Automation System Architect
Solved!
Go to Solution.http://forums.ni.com/t5/LabVIEW/LV-2009-Icon-Editor-Turned-to-Previous-Version/m-p/1022706#M455826
Hmm I just checked this post out and it seems like somehow my folder got set to Read Only - but even as an Admin I can't change it to not read only...time to call IT.
Ryan Vallieu
Automation System Architect -
File has reverted back to old version
Hi,
I opened up an excel spreadsheet and somehow it has reverted back to the original old version that I first made in 2012, I have no idea why it did this.
Normally this wouldn't be a problem as I have saved it multiple times and I back up my mac regularly using time machine, but for some reason all of the versions of this in time machine have saved as this old original from 2012?! I read and edit this spreadsheet at least 2 times a week and have now lost 2 years worth of updates, has anyone had this happen to them before or managed to retrieve any information?
Thanks for any help!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Store and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I cannot connect the bluetooth on my new HP Officejet 100 Mobile Printer to my HP laptop
the computer is an hp g6-1d45dx with the trial of windows 7....thanks!
-
"Getting Started" page for Firefox 16.0.1 has a video window that plays audio only. Firefox test page for plugins shows RealPlayer, Flash, Flip4Mac and Java are up to date. What other video plugins are required. I'm currently using Firefox 10.0.2 and
-
Error when invoking webservice from ODI
Hi all, When I execute my ODI scenario ( This scenario call a BPEL websevrice ) ,I Have this error , please have you any idea, com.sunopsis.wsinvocation.SnpsWSInvocationException: Error doing JNDI lookup on target jdbc/PRT_DBDS at com.sunopsis.w
-
Is Password-protecting files possible?
I am wondering how to put a password on a file so that only I can access it. I have some sensitive documents that can't be accessible by just anyone. Thanks!
-
Reinstalling Production Premium CS5 on windows 7 without prior deactivation.
Hi, My Win 7 died randomly and I was unable to deactivate my Copy of CS5. The adobe suite was installed in a different HDD which I hope is still intact. When I reinstall Win 7 64bit and my CS5 suite will I have problems in registering it? Also is the