BEEP like sound in SILENT MOOD

My handset is Nokia 5800XM, firmware version 31. If I screen any contact or a group of contact in profile for not ringing or if I press silent key while calling a person, there is a BEEP like sound after disconnecting/end of silent ringing. That means I have to heard a sound/BEEP which I do not want to hear in silent mode/ or call screening. How can I prevent this? Do you have any idea? Please help me. Thanks in advance.

Go to profiles>Silent>Personalize and check if the warning tones and Keypad tones are set to off.

Similar Messages

  • Beep sound in silent mood

    My handset is Nokia 5800XM, firmware version 31. If I screen any contact or a group of contact in profile for not ringing or if I press silent key while calling a person, there is a BEEP like sound after disconnecting/end of silent ringing. That means I have to heard a sound/BEEP which I do not want to hear in silent mode/ or call screening. How can I prevent this? Do you have any idea? Please help me. Thanks in advance.

    Go to profiles>Silent>Personalize and check if the warning tones and Keypad tones are set to off.

  • What does it mean when I try to start my old iMac and I get a beep beep beep that sounds like a truck backing up?

    I have an iMac that was running Lion, and everything just died. I tried to wipe the hard drive and reinstall the operating system, but now when I boot I get a beep beep beep that sounds like a truck backing up. What is wrong?

    How many beeps?
    1 tone, repeating every 5 seconds: This indicates no RAM is installed.
    3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data integrity check.
    1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • Mac Mini emitting beep-like noises while switched on

    Hi all,
    I have a late 2011 Mac Mini which has been working fine until today.
    Today, it started emitting really annoying beep like noises while switched on. The Mac Mini functions as usual, safe for the really loud, really annoying beeping noises, which seem pretty much to occur randomly, and sound pretty random too (as opposed to steady system warning beeps).
    I also opened the Mac-Mini hatch, checked the RAM was connected properly, and removed dust/fluff, but the beeping still happens.
    I ran the Apple Diagnostic and also checked the Disk using disk utility, but got no errors, and I can't seem to find anyone who has had a similar issue on the net.
    Any ideas?
    Thanks in advance!

    Google -- Mac Mini blinks and beeps
    when turned on
    It will take you to where you need to go to solve this problem.
    Mine did that and it took me to Apple Support page identifying what was going on.
    Slow blinks, fast blinks, etc etc
    Power On Self-Test Beep Definition - Part 2 - Apple Support

  • My mac pro keeps making a chirping cricket-like sound

    My Mac Pro keeps making a chirping cricket-like sound, more and more frequently. Has anyone else had this problem? Is this telling me one of my HD is going bad?

    K_Bar wrote:
    ...I had them so close together that it sounded like the MacPro. Once I pulled them apart however, it was clear where the sound was coming from. Thank you all for the help!
    Been there, done that. And the instructions, once I found them, seemed to list every possible communication except the chirps; I had to call tech support, which was actually a pleasant experience after dealing with Verizon.
    The frequency of chirping as well as how long each chirp sequence lasts seems to be related to the line voltage. It's as if the UPS begins to worry as the line voltage goes down that it might have to actually do something with its battery.

  • I unplug my MacBook Pro from power and external speaker and I hear incremental beeps and sounds as if email being sent. Doesn't' stop until I close email

    I unplug my MacBook Pro from power and external speaker and I hear  incremental beeps and sounds as if email being sent. Doesn't' stop until I close email.   Not sure what is happening our what if any emails are being sent.

    You can install Temperature Monitor and have a look if the CPU oder GPU oder something else went to hot. The processor has a built in safety mechanism to shut down the computer before taking damage.

  • How do I turn off Sleep/Hibernation/Startup Beeps and Sounds?

    I have a Lenovo Thinkpad x200 running vista ultimate. type 7454-cto
    How do i turn off these annoying beeps that sound every time my computer goes into and out of sleep and hibernation.
    I've tried turning the sound scheme to "No sounds," but the beep still sounds when computer enters and exits sleep and hibernation.
    If i turn on "mute" before i enter sleep or hibernate, the beep does not sound (which is what i want). Unfortunately, its impossible to turn on MUTE when im trying to bring the computer out of sleep or hibernate (which makes it very distracting to turn the computer on during class). 
    Solution:
    Enter BIOS by pressing F1 during boot
         >Config
                  >Beep and Alarm
                             Set Power control beep to [Disabled]
    Message Edited by ender63071 on 09-18-2008 03:36 PM
    Solved!
    Go to Solution.

    Just tried it out and the BIOS solution works.  Here's the funny part: After disabling the beep in BIOS config, I started windows and opened Power Manager again.  Sure enough, the "beep when power state changes" option was finally disabled.  Just for kicks, I tried to see if I could enable it again in Power Manager.  I enabled it just fine in Power Manager but when I tried to disable it again I COULDN'T!  I had to back into the BIOS again to disable it.  So the deal seems to be that Power Manager will allow you to turn on the annoying beep, but if you want to turn it off, you need to do it in the BIOS settings.

  • Does your Macbook with Retina make a small (very quiet) fuse-like sound during start-ups?

    Dear fellow Macbook (preferable with retina users!) users!
    Whenever I press the power button to start up my Macbook with Retina (Mid-2012), I hear this very faint fuse-like (cannot describe it any better, sorry!) coming from the top (I think the top-right) section of my keyboard. I can hear it every time I press the power button, it doesn't matter whether it is turned off or on sleep mode but I can always hear this weird fuse-like noise. I was wondering if anyone else hears this noise?
    I don't think it is an software issue. Please some enlighten me?
    Thank you.

    I have no idea what you men by " fuse-like  " sound. fuses  do not make a sound. Or do you mean a burning fuse like used in the old days for dynamite?

  • My ipod is restarting again and again with a crack like sound

    I have a iPod Classic. Few days ago i was listening music and i noticed that the power suddenly reaches to half. After few second it was just about to empty. And after few second my iPod turned off and restarted again but not completely. When ever it  starts it suddent turns off with crack like sound. I just let it to drain off the battery for a whole one day. Next when i started it , it showed me a display of "Connect To Power" when i connected it, it followed the same routine as it was showing earlier . I waited for some time and eventually it showed me display of "Reset you iPod Through iTunes". i reseted it twice and now the it is starting and turning off agagin and again....... Plz help......!!!!!!

    Its happening to me too. I was just on Instagram when all of a sudden the screen went to white for a second then shut off. I didnt touch anything on my iPod and it showed the apple logo. I thought it was turning itself back on, but the white screen popped up again and it turned off. It has repeatedly been doing this for a while and nothing is helping.

  • Two problem in screen and silent mood.

    Hi,
    I want to explain my problem and I hope to help me to solve this problem.
    I have Iphone device since 5 months ago and I have two problem.
    First, when I want to keep my Iphone at silent mood by move the button , the nope moves but the Iphone still in normal mood. That mean is the button vibration between normal and silent mood by itself. This problem appears a months ago.
    second, In screen there are two or three cells not active. This problem has been appear since 3 months ago.
    http://img145.imageshack.us/img145/979/42054847.png
    I bought my Iphone from Mobily.
    Thanks..

    hi usman,
    1) you can set the path for reports in registry. the parameter
    is REPORTS_PATH. set it to the directory where the report is
    located.
    2) destype PRINTER will print on the printer you specify in
    the DESNAME parameter. the printer needs to be accessible
    from the reports server environment. there is no destype
    PREVIEW anymore in reports 9i.
    if you need to print on a local printer of the client pc
    where you call the report check out:
    http://otn.oracle.com/products/reports/htdocs/getstart/examples/Tools/thinclient/thinclient/Readme.html
    thanks,
    christian

  • The audio book on my nano only emits a quick, tin-like sound beginning with the 77th chapter. Any ideas?

    I have been listening to a four volume audio book on my nano. At the 76/77th chapter, the narration stops and all I hear is a faint, rapid beat-like sound. This happens on all subsequent chapters. (The first 76 chapters continue to work just fine.) This had never happened before, and I've listened to a ton of books.
    I restored the nano to the original factory settings and synced the book to my nano again. Same problem.
    The book plays just fine on my computer, so I don't think it's corrupted.
    One other bit of information. About 3 months ago, I dropped the nano and cracked the glass a bit. I covered the cracks with some clear packing tape, and it has continued to work just fine--until now.
    My software is up to date--version 1.2. Mine is an 8 GB nano, the little square version. It's about a year old and is formatted to my Mac.
    Any ideas?

    The info on my MacBook is incorrect. I'm running OS 10.9.5,

  • I opened my laptop and it started beeping like a siren

    I had my laptop in hybernate, and it had no problems when I was using it 30 minutes before. The, I opened it up and pushed the on button and as it ws starting up it started beeping like an alarm and wouldnt stop even evn I shut the lid. Eventually, it stopped on its own. What happened? Will it happen again? and how can i fix it?
    Thanks

    Don't worry about that! your laptop maybe slow battery, or keyboard error (stuck button keypad)

  • I can hear a loud 'CD spinning/fan like' sound from my MacBook Pro intermittently. Definitely not the audio as i muted it. No CD either. And I don't have any

    I can hear a loud 'CD spinning/fan like' sound from my MacBook Pro intermittently. Definitely not the audio as i muted it. No CD either. And the only programs running are words, safari and mail.

    It sounds like the fan but this is the first time I hear it in the past 6mths using this Mac. If its the fan, shouldn't the sound be there all the time and not intermittent?

  • "static" like sound after 10.5.3 update

    Hi all, using a MacBook (Santa Rosa), and updated to 10.5.3 a couple of days ago. However, I am noticing that after resuming from sleep, it will often happen that the first sound that is played will be accompanied with a hissing/static like sound, lasting for about a second. This happens through the laptop speakers, or through headphones if they are plugged in. The volume of the noise appears to be dependent on the volume control setting, if that's of any significance.
    Is anyone experiencing a similar issue, or know of a fix? Many thanks in advance.

    Yes, You should have a previous system folder after an archive and install.
    Can you backup everything to a second HD? Or, were you running Time Machine (a good idea). If you can, then you can safely delete many things from the previous system folder. Or, at least enough to begin testing to see if your apps work.
    I routinely do and A&I when I upgrade. Then I test all my apps (or at least the important ones and a sample of the lesser ones). I move the previous system folder to a spare disk and keep it around for a few weeks incase I need to copy something over (like fonts).
    BTW, I suspect your start up disk is out of space, not memory. Again backing stuff up, particularly on a laptop is a very sound idea and also allows you to manage your stuff better -- older stuff goes on the backup. Despite some problems, Time Machine works well for this as do a number of commercial products.

  • My notification center (windows 7 64 bit) disappear from time to time, any idea? (When it disappears, I cannot use the special keyboard functions like sound...

    My notification center (windows 7 64 bit) disappear from time to time, any idea?
    When it disappears, I cannot use the special keyboard functions like sound,brightness...
    Thanks!

    How is Acrobat 8 not fully Windows 7 compatible?  I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit.  It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues.  And I am at the latest AA8 version, 8.3.1. 
    And how are Acrobat 8 and Reader XI are not compatible?  I have always had Acrobat and Reader installed on the same PC, without ever having any issues.  And Adobe allows the installation of one after the other.  So apparently Adobe allows them both to exist together.  If they are incompatible, then why would Adobe allow them to exist together? 
    Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in.  So now Reader is not installed and only Acrobat 8 is installed.  I then tried to load the PDF file, but I still get the Acrobat 8 error described above. 

Maybe you are looking for

  • RESTFUL WebSevice in APEX 4.0, how to do

    I have setup a restful webservice using NetBeans and Glassfish. I can access the webservice using browser with this address: http://testserver1:8081/SampleDB/resources/emps and it gives me reply: <?xml version="1.0" encoding="UTF-8" standalone="yes"

  • Service Tax Configuration in TAXINJ

    Dear All, I have to configure Service Tax (inc. ECess and HECess) in a system that is using TAXINJ. I want to know whether service tax has anything to do with TAXINJ. Or can it be maintained in a similar way as we do for TAXINN. Any input will be hig

  • Windows XP PDF File associations broken

    After updating to Adobe Reader XI (Windows XP 32 bit),  my PDF file associations no longer worked. When I double clicked on a pdf file, it would open using a different application (Hex Editor Neo) instead. The file thumbnails in Windows Explorer did

  • UPgrade to Tiger or forget it?

    Help. I've got an ibook G4. 800MHz, 640 MB DDR Sdram...133 bus speed. 256. Safari keeps crashing etc. What would the advantages/benefits be to upgrade to 10.4 Tiger? Is it even worth the cost? Or should I just save up and get a new mac book when I ca

  • Unexpected root element

    I am having some trouble unmarshalling an xml document using JAXB 1.0. I am getting the error unexpected root element. Can someone please tell me what causes this? The root element of the document I'm trying to unmarshall matches the schema root elem