Beep sound on powering, Beep sound on powering

Beep sound and not getting powered on

What is the nature of the beep? See AnaMusic  support article link.

Similar Messages

  • My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. Help please.

    My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?

    If you recently installed new ram, make sure it is seated properly.
    If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in.

  • Beeping noise coming from internal sound board

    there is a strange beeping noise coming from internal sound board. it doesnt matter if the volume is all the way down it still happens. the noise happens most ten times an hour and it is just one loud beep. took it to geek squad and they couldnt explain. so why is it making this noise?

    This beeping plagued me for months and months, driving me insane.  I tried to find a solution on the Internet; however, all I found were many people complaining about this random beeping noise from their HP laptops.  A couple of times the beeping stopped for a few days, but then it would come back.   But almost three months ago it stopped for good (I hope)!  I didn't do anything--it just stopped.  WEIRD.  But you might find this link helpful. http://www.youtube.com/watch?v=svvZ70_H2wM&feature=email&email=comment_reply_received

  • Beep....Beep....Beep goes my 2x2Ghz G5

    Ok, it's dead quiet in here and i noticed a very faint beeping sound in my office. After poking around i realized it's eminating from my G5 tower?! Is this normal? I hope and pray it's an "all systems go" beep and not a "I got ****, now where's the fan?" beep!!?? Someone please enlighten me. I've been a mac user for about 20 years and i've never had a machine sit there and beep...

    The beeping is caused by a slight design flaw in a coil in all the PowerMac G5 power supplies except the Quad supposedly. (it's newer and more powerful)
    Apple doesn't think it's all that much of a big deal, since normally most any computer noise is drowned out by the fans. Since the PowerMac was designed to have quiet fans, these other noises all a sudden get our attention.
    So with that in mind, you might want to c boot from the Tiger install disk and install the Developers Tools. In your System Pref's will be a new pane called "Processor" which, provided you keep a cool room (-75ºF) as you should anyway for a lot of expensive electronic equipment, turn off "nap mode" will eliminate the beeping sound.
    You'll have to reset it every-time you boot, there is a script around somewhere that will automatically turn it off on a reboot for you.
    That's about it.
    Let me take this opportunity to remind you how important it is to clone your boot drive to a external drive and keep it disconnected for emergency repair, hold option boot, recovery etc.
    It's a clone and it will save your bacon if your hard drive suddenly fails one morning. Your up within a boot.
    One can learn how to clone over at Carbon Copy Cloner forums, they recieve only donations for their software and I recieve nothing.

  • Extra 1GB RAM causes 1 long beep and 8 short beeps.

    This is my first post, and I am having problems installing the maximum 3GBRAM on my KT4AV L mobo. I bought 3 1BB sticks from crucial, all PC2700. Each stick is ok. The first two work with a 512MB stick in the 3rd slot, but when I try to add my 3rd GB stick the computer cant get past the 1 long beep and 8 short beeps. I have tried adjusting the voltage to 2.7, (didnt try 2.8, as someone in another thread thought it might be unwise for life of RAM.)
    Is there a solution to this? havent updated my BIOS, but I am nervous about doing this because I have heard it can mess everything up. Any advice will be welcome.

    Well, I can't guarantee the whole amount of RAM will fit. It ought to, but that is all I can say. Grayone is saying this as well as I but shorter.
    I have two more reasons for wanting you to get another PSU:
    - This is not particulartly quiet, 26dB idle is nothing to shout about. http://www.qtec.info/products/product.htm?artnr=14321&specs=1 (Please note the little word "peak" - that is not the same as "max".
    - I speculate in that you think you need this much memory because your system isn't working up to the level of the in-built parts. The PSU has hindered efficient use.
    How much would you like to spend?
    Prices are for comparison only!
    The Tagan 480W seems to be 1000 Sw kr.
    "My" Zalman is about the same.
    Antec is a very good, quiet and reliable brand, and I'd say more powerful and feature-rich than both the Tagan and Zalman - for that money you'd get: http://www.antec.com/specs/true480_spe_EU.html and for half of it you might get this: http://www.antec.com/ec/productDetails.php?ProdID=07483
    Hiper and Sirtec/Chieftec and Seasonic are other good brands - Sirtec I'v got in one system and that is running very good and quiet.

  • Load another sound in the same sound object

    Hi,
    I am loading a sound like this:
    public var smallSound:Sound = new Sound();
    public var trans1:SoundTransform = new SoundTransform(1, 0);
    public var channel:SoundChannel = new SoundChannel();
    smallSound.load(new URLRequest("firsttrack.mp3"));
    channel=smallSound.play(0,1,trans1);
    When an event occurs (button click actually) I would like to stop playing the first sound and playing another sound in the same object. So I try doing this:
    smallSound.load(new URLRequest("secondtrack.mp3"));
    channel=smallSound.play(0,1,trans1);
    but it does not work. The first sound keeps playing. I havent understood something probably.. Can someone help me ??

    ok, i solved my problem. It works like:
    channel.stop();
    smallSound = new Sound;
    smallSound.load(new URLRequest("secondtrack.mp3"));
    channel = new SoundChannel;
    channel=smallSound.play(0,1,trans1);

  • I lost sound.  In systems/sound all options are greyed out

    I lost sound. In systems/sound all options are greyed out

    Try resetting your SMC   http://support.apple.com/kb/HT3964    Then make sure in system prefs/sound/output that you've selected internal speakers.

  • I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

    I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

    You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
    Unless you've iPhone 4S (looks similar to iPhone 4)

  • How do I tell Apple to fix their software like apps that play sound even though the sound is turned off and not being able to disable features you hate like game center

    Apple is suppose to be the pinnacle of usability and, yet, I want to throw my new IPhone 4s as far as I can and watch is smash into a million pieces on concrete. Seriously, I've already got three things that irritate the **** out of me. First, there are Apple apps that insist on playing sound even though the sound is turned off. If I flick a switch to turn the sound off, I want the sound off!!!! Second, if I do not want a totally unnecessary feature like Game Center, I should be able to disable it. I completed most of the Angry Bird levels with 2 or 3 stars and now I have to start over from square one. Maybe, this happened when I upgraded to the 4s but it sure seemed to happen when I joined Game Center. Tomorrow, I am going to reset my 4s to factory defaults to try to get rid of my Game Center account. I don't want Game Center! I do need Game Center! I hate Game Center! Finally, I had an alarm go off to wake me up and there was a Snooze button but no button to turn the alarm off. I flicked the slider to access the main screen expecting to see something to turn the alarm off but there was nothing. The alarm just kept alarming. I had to warm boot my IPhone to shut the alarm off! Really, Apple!!!!

    The sound is turned off. Only, some Apple apps like YouTube and Siri make sound when the sound is turned off. It is very embarrassing when this happens at work. My question was how do I tell Apple to fix this?
    Turning off game center does not work. The games just prompt me to sign in when they are started.I have tried everything I can find online to stop this behavior. It is annoying and should not happen. My question was how do I tell Apple to fix this?
    The alarm went off. There was a green thing that looked like a button but pressing it did nothing. There was a red button that said snooze. I did not want to snooze. I wanted to turn the alarm off. I slid the bar to unlock the phone and there were no running apps with a button to press. The alarm just keep running. I have not had this problem since it first occurred. The alarm now shuts off when I just unlock the phone. It may have happened because I had another alarm app running. The two may have interfered with each other. I would like to tell Apple about it.
    It also annoys me that the button that closes apps leaves the phone app running. If I press on a number at 6:00 AM to get information about who called me, the phone automatically dials the person back and my natural reaction is to press on the button to close the phone app but the phone keeps dialing this person at 6:00 AM. It is a bad design. I would like to tell Apple about it.
    Finally, I looked all over Apple's site to try to find someplace I could send them a polite message to let them know that I was not happy with these "features" but could not find anything. It is extremely frustrating to have issues with a product and not being able to tell the manufacturer about it. So, you grow up!.
    When trying to fix the Game Center issue, I saw a link someone posted to report issues with the IPad to Apple. The answer I am looking for is where is the link to report issues with the IPhone.

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • 1 long beep and 2 short beeps

    hello this is my second post....before i had problems with me8 bios, then downgraded using this forum tool..thx for that.
    now i can boot my PH67A-C43 (B3) board and use it normally, but my problem is that when ever i try to restart or boot it again without waiting i get 1 beep with is normally the one which indicates that system is OK and then 1 long beep and 2 short beeps and no display on the monitor....i can only boot my PC if i let it turned off for 5 or more minutes...this is really annoying!!
    specs:
    Operating System
       Microsoft Windows 7 Home Premium 64-bit SP1
    CPU
       Intel Core i5 2400 @ 3.10GHz   32 °C
       Sandy Bridge 32nm Technology
    RAM
       8.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
    Motherboard
       MSI PH67A-C43 (MS-7673) (SOCKET 0)   37 °C
    Graphics
       VX2250 SERIES (1920x1080@60Hz)
       ATI Radeon HD 5700 Series (ASUStek Computer Inc)
    Hard Drives
       56GB OCZ-AGILITY3 (SSD)   30 °C
       149GB SAMSUNG HD161GJ (SATA)   24 °C
    Optical Drives
       SONY DVD RW DRU-880S
    Audio
       Realtek High Definition Audio

    i heard about the full cmos clear yesterday....after the flash i just pressed the clear cmos button at the back panel...but now i did the full clear...
    well i have an aerocool e80 700w psu...i was thinking it might be the psu...then i tried on my old 500w coolermaster psu and it worked fine(i could restart as many times as i wanted/no blank screen)
    then i hocked back the aerocool to confirmed if it was at fault and POOOFFFF no more blank screen.i restarted any time with no problem...how can it be?what caused the blank screen and BSOD?
    i will try to use the PC as much as i can and see if i get any blue screen...will keep u posted
    ***memory is Kingston 4*2gb.i ran memtest86 it found no error over 2 hours...i never overclock anything

  • I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Won't start up - 3 long beeps and 1 short beep repeated

    As I was watching Netflix, the display went crazy and displayed horizontal lines and the computer froze.
    I held the power switch down to shut it off.
    After restarting, seemed to work fine for a few minutes, then same thing happened.
    Reset again. Seemed to start up fine (heard the chime and the hard drive going) but no display output.
    Reset again. Got the start up chime, a white screen with horizontal lines, and I get 3 long beeps and 1 short beep repeatedly.
    Any ideas?
    Thanks for your help in advance.

    The beeps you're hearing means the system has no usable memory. You can try reseating the memory or swapping for other known working memory (pain as it is to open the mini up). Otherwise, typically that means it's new logic board time. See this Apple article: http://support.apple.com/kb/HT1547

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Analog sound signal no digital sound

    I have a A660-BT2G25 laptop which includes DOLBY® Advanced Audio.  I connected it via an HDMI cable to the back of my Denon receiver and set the receiver to receive either digital sound input or analog sound input from the laptop that I am currently using as part of my entertainment center. All items in my device manager are operating properly (the system shows NVIDIA High Definition Audio under sound four identical times with all divers identical in each, all with normal operation & no conflicts-not sure if this is normal). The computer recognizes the Receiver as an Denon AVAMP-3 in the sound setup in Control Panel. Further,  I have set it as the default and run test after test. The properties there indicate the device is operating normally and shows DTS, Dolby Digital and Dolby Digital Plus. w/HDCP supported, up to 192 sampling rate, 16 & 24 bit. Here is the rub. My receiver is only receiving analog signals under PCM (analog signal) and not DTS (digital) so while the sound is good and clear per my receiver upgrading the signal, there is no digital splitting of the signal to the 5.1 channels. If I force the receiver to take only DTS signals over the HDMI cable there is no sound at all. There is nothing wrong with the receiver. Anybody have any suggestions???

    Hi, I just purchased a Mac Pro and am running 10.5.2. I am seeing the exact same behaviour when using the optical digital out from the Mac Pro to a Teac Receiver. It takes about 5 seconds for the audio to start playing from a "silence". If there is continuous playback there are no problems, but if there is ever a significant pause in the audio the receiver shows "unlock" on the display and stops playing out audio.
    It certainly does seem like the digital stream is getting interrupted which then causes an issue with the receiver.
    I haven't been able to find a solution yet.

Maybe you are looking for