Beeping sound from hp adapter

one month back I got my dv6 3056tx notebook's battery is not charging. But upto now I keep managing my laptop because I use my laptop very less. Today when I started plugging in my power adapter and started using laptop , a beep sound came from the adapter. When I shut the power switch,after 5 seconds it stopped beeping. What could be the problem.Do I need to replace it immediately or else it is due to the damaged battery? If I nned to replace my adapter how can I find the model number of my adapter? Pls help...
Thanks a lot in advance
Aishwarya Kumar
India
This question was solved.
View Solution.

Adapters occasionally buzz and whine before they die. It is the circuitry that changes the very high AC wall power to the DC power to the laptop. There are some gates and switches in there that actually move a bit and they can make noise. The adapter could work like that for months or die tomorrow but you should replace it ASAP and keep an eye on it. Do not leave it plugged in to the laptop overnight, for example. There is a very slightly elevated chance of fire.
Here is a picture of what you need:
http://www.ebay.com/itm/Genuine-Original-65W-AC-Adapter-for-HP-Pavilion-DV4-1500-DV6-3000-dv7-4151nr...

Similar Messages

Intermittent beeping sound from my PC internal speaker. How to disable it?

I have a HP Pavilion 1070d PC. I get an intermittent beeping sound from my PC internal speaker. It seems to engage when the hard drive starts working when it's been down for a while. How do I disable the beeping sound?

Domgoh, welcome to the forum.
Normally, the beeps that come from a computer are BIOS beep codes. They are warnings that something is wrong with the computer. At the bottom of the page in the link that I provided are codes for different motherboards. Review them to see if this is what you are receiving.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to produce beep sound from sap program?

Hello all,
Can anybody help me to produce beep sound from sap program.
I dont want to play a WAV file.
I just want to produce a BEEP sound.
Your help is highly appreciated.
Thanks n Regards
chandu

Hi
Thanks for the quick response.
I tried the code in ur reply.
Its not producing any beep sound.
type-pools: ole2.
data: return type i,
sapinfo type ole2_object.
data: begin of command,
command(12) type c value 'cmd /c echo ',
hex07(1) type x value '07',
end of command.
create object sapinfo 'SAPINFO' no flush.
call method of sapinfo 'EXEC' = return
exporting
#1 = command
#2 = 0.
free sapinfo.
Is there anyother way??
Thanks

T410 random beep sound( from machine for less than 5 mins) + screen freeze + Blue Screen (some time)

I have new purchased T410 during christmas time.
here is my machine spec(everything from Levono, did not upgrade any parts):
T410, model 2516CTO
8 GB RAM
i7 CPU
500GB HDD
Integried graphic card
Windows 7 professional (applied all latest updates)
Problem random happen, for about 8 times,
System works regularly
and all of sudden machine make continousely "beep" sound(from machine, not speaker),
after that screen freeze,
and then sometime system go back to normal, sometime crash completely to blue screen(most time).
The whole problem takes about 3-5 mins.
1 time it even happen in safe mode (after log in, desktop freezed immediately, then blue screen).
I chkdsk the whole disk found no problem.
I call Lenovo tech support, he ask me restore the original OS(Windows 7 home prim), then he can help me.
I refused because that's mean i have to destroy all the work I done (spend almost a week to install development tools and software) .
Since the problem is random anyway, I just reboot and bakeup more offen. :-(
I used Thinkpad since IBM time, never have problem with previous 2 T Series machines, but this one, not happy.

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\FreezeIssue\Minidump\010111-51090-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
WARNING: Whitespace at start of path element
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c18000 PsLoadedModuleList = 0xfffff800`02e55e50
Debug session time: Sat Jan 1 14:53:03.162 2011 (GMT-5)
System Uptime: 0 days 0:29:01.004
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck F4, {3, fffffa8008159060, fffffa8008159340, fffff80002f935d0}
Probably caused by : csrss.exe
Followup: MachineOwner
2: kd> !analyze -v
*                        Bugcheck Analysis                                    *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8008159060, Terminating object
Arg3: fffffa8008159340, Process image file name
Arg4: fffff80002f935d0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8008159060
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_RECORD: fffff8800a977b78 -- (.exr 0xfffff8800a977b78)
ExceptionAddress: 0000000077a8592d
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 0000000002ea0ef8
Attempt to write to address 0000000002ea0ef8
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000002ea0ef8
WRITE_ADDRESS: 0000000002ea0ef8
FOLLOWUP_IP:
+0
00000000`77a8592d ??              ???
FAULTING_IP:
+0
00000000`77a8592d ??              ???
FAILED_INSTRUCTION_ADDRESS:
+0
00000000`77a8592d ??              ???
BUGCHECK_STR: 0xF4_C0000005
STACK_TEXT:
fffff880`0a9770f8 fffff800`03014652 : 00000000`000000f4 00000000`00000003 fffffa80`08159060 fffffa80`08159340 : nt!KeBugCheckEx
fffff880`0a977100 fffff800`02fbd3e3 : ffffffff`ffffffff fffffa80`0ab4f060 fffffa80`08159060 fffffa80`08159060 : nt!PspCatchCriticalBreak+0x92
fffff880`0a977140 fffff800`02f4580c : ffffffff`ffffffff 00000000`00000001 fffffa80`08159060 fffff6fb`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17946
fffff880`0a977190 fffff800`02c87993 : fffffa80`08159060 fffff800`c0000005 ffffcbdb`afa4f658 fffffa80`0ab4f060 : nt!NtTerminateProcess+0x20c
fffff880`0a977210 fffff800`02c83f30 : fffff800`02cc2dbc fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0a9773a8 fffff800`02cc2dbc : fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 00000000`02ea2180 : nt!KiServiceLinkage
fffff880`0a9773b0 fffff800`02c87d82 : fffff880`0a977b78 00000000`000116e4 fffff880`0a977c20 00000000`02ea1c58 : nt!KiDispatchException+0x53b
fffff880`0a977a40 fffff800`02c868fa : 00000000`00000001 00000000`000116e4 fffffa80`079c2201 00000000`77a85a01 : nt!KiExceptionDispatch+0xc2
fffff880`0a977c20 00000000`77a8592d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`02ea0f00 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77a8592d
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
Followup: MachineOwner
2: kd> !analyze -v
*                        Bugcheck Analysis                                    *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8008159060, Terminating object
Arg3: fffffa8008159340, Process image file name
Arg4: fffff80002f935d0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8008159060
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_RECORD: fffff8800a977b78 -- (.exr 0xfffff8800a977b78)
ExceptionAddress: 0000000077a8592d
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000001
   Parameter[1]: 0000000002ea0ef8
Attempt to write to address 0000000002ea0ef8
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000001
EXCEPTION_PARAMETER2: 0000000002ea0ef8
WRITE_ADDRESS: 0000000002ea0ef8
FOLLOWUP_IP:
+0
00000000`77a8592d ??              ???
FAULTING_IP:
+0
00000000`77a8592d ??              ???
FAILED_INSTRUCTION_ADDRESS:
+0
00000000`77a8592d ??              ???
BUGCHECK_STR: 0xF4_C0000005
STACK_TEXT:
fffff880`0a9770f8 fffff800`03014652 : 00000000`000000f4 00000000`00000003 fffffa80`08159060 fffffa80`08159340 : nt!KeBugCheckEx
fffff880`0a977100 fffff800`02fbd3e3 : ffffffff`ffffffff fffffa80`0ab4f060 fffffa80`08159060 fffffa80`08159060 : nt!PspCatchCriticalBreak+0x92
fffff880`0a977140 fffff800`02f4580c : ffffffff`ffffffff 00000000`00000001 fffffa80`08159060 fffff6fb`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17946
fffff880`0a977190 fffff800`02c87993 : fffffa80`08159060 fffff800`c0000005 ffffcbdb`afa4f658 fffffa80`0ab4f060 : nt!NtTerminateProcess+0x20c
fffff880`0a977210 fffff800`02c83f30 : fffff800`02cc2dbc fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 : nt!KiSystemServiceCopyEnd+0x13
fffff880`0a9773a8 fffff800`02cc2dbc : fffff880`0a977b78 fffff880`0a9778e0 fffff880`0a977c20 00000000`02ea2180 : nt!KiServiceLinkage
fffff880`0a9773b0 fffff800`02c87d82 : fffff880`0a977b78 00000000`000116e4 fffff880`0a977c20 00000000`02ea1c58 : nt!KiDispatchException+0x53b
fffff880`0a977a40 fffff800`02c868fa : 00000000`00000001 00000000`000116e4 fffffa80`079c2201 00000000`77a85a01 : nt!KiExceptionDispatch+0xc2
fffff880`0a977c20 00000000`77a8592d : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`02ea0f00 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77a8592d
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_C0000005_IMAGE_csrss.exe
Followup: MachineOwner

Beep sound from CPU

I have removed the CPU cover to clean it. After that whenever i boot my system i hear a constant beep sound for atleast 2 seconds at start of booting process from the CPU. there is a display on the screen such as
memory runs at single channel.
your system cover has been removed since last start up.
please ensure that any access to the system is authorized.
then booting will continue unless i press F1.please identify my problem.

kalyani_257 wrote:
I have removed the CPU cover to clean it. After that whenever i boot my system i hear a constant beep sound for atleast 2 seconds at start of booting process from the CPU. there is a display on the screen such as
memory runs at single channel.
your system cover has been removed since last start up.
please ensure that any access to the system is authorized.
then booting will continue unless i press F1.please identify my problem.
Please give a precise description on what you meant by "I have removed the CPU cover to clean it". Did you mean to say that you removed the PC side cover to clean it?
Most of us in the Forum are aware that there is a metal cover on the actual CPU that covers the core(s).
Some people even go as far as lapping the cover to increase contact with the cpu cooler for better cooling when beginning an extreme overclock.
From your description of your symptoms, it sounds as if you inadvertently unplugged something and did not fully reseat it.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Very High Pitched and Super Quiet beep/sound from DV6

They seem to make a new DV6 every year but This one is mine.
I've had this notebook since September and its awesome. But there is a very annoying issue I have always had with it. When I'm using it in a very quiet environment I can hear it emit a high pitched beep type sound every second. Its extremely quiet but its one of those sounds your brain suddenly notices and you can't stop hearing it - like when some old CRT monitors and tube TV's are left on. I usually only hear it when the PC is idle or doing very basic tasks like I'm doing now typing this. I thought for sure it was something else in my home for the first month until I was using the notebook someplace else and heard the same annoying sound. When I put my ear up to the notebook I can hear it better and that its somehow tied with the fan. I can hear the fan barely slow down by probably 5%, then that beep and the fan speeds up again. This happens continuously until I'm not idle. Anyone else notice this? My motherboard was replaced a month ago (It randomly died) but nothing changed.

Seems to be normal "CPU whine". Nothing can really be done about it. I've just been lucky with my notebooks in the past not having a whine. I set my networked storage a little closer to where I sit and it cancels out the CPU whine.

V200 Horrible BEEP sound

I have the problem with my V200. When I'm plugging/unplugging the power supply there comes the horrible BEEP sound from the inside (also when computer go to standby mode). It's really very loud and I don't know what to do with it. It's not that beep from the device manager / hidden devices panel. It's other BEEP louder and more annoying :-)
There is no option in BIOS and no Power Manager for V200 to turn it off. The only way to don't hear this sound is to mute audio on a laptop, but it is very uncomfortable.
Any ideas? Please help me...
Thanks in advance
R61 - T7100, 2GB RAM, Nvidia Quadro 140m, 120GB HDD, WSXGA+, 1GbE, Intel 4965N

See the following thread here --> V200 annoyances, the poster there solved the problem by reinstalling the OS, so you might want first of all try to update/reinstall V200 specific software and drivers in order to see if that helps.
ThinkPad T60/X32/600/770 · IBM IntelliStation · 3x IBM SpaceSaver II

UCS c240 M3 beeping sound

I have recently installed ESXi 5.0 on the UCS C240 M3 using RAID1 as shown in the image above and it was working fine. but now am getting continues beeping sound from the server and one of the HDD is showing orange light, I tried to replace the drive the problem is still there. what coud be the casue and can any1 please give me a solution to it.

The RAID Controller has detected a Degraded Virtual Drive. The orange light indicates the RAID-set is rebuilding. Use "storcli" for example to check this: "
/opt/MegaRAID/storcli/storcli64 /c0 show
Dgrd and Rbld should be seen in the output somewhere.
The beep is turnded on by the Controller.
/opt/MegaRAID/storcli/storcli64 /c0 show alarm
Ctrl_Prop Value
Alarm ON
Use
/opt/MegaRAID/storcli/storcli64 /c0 set alarm=silence
to turn it off.
Alain

Beeping sounds when running photoshop CC with open files...

Hi,
I started gettting randing but re-curring beeping sounds from Photoshop CC whenever I open a file (any file). While files are open I keep getting this annoying beeping sound repeatedly. I have tested my computer to see if it's some other issue but it's directly associated with Photoshop and I can't figure out what it is. I thought at first it's going to be my hard-drive or something as I've had similar situations like this before where I had to replace the drive. The only problem here is it doesn't happen with any other app except photoshop.
Memory / resource ussage at launch starts at almost 800k. When 1-2 files are open, memory / resource usage jumps to over 1,100,000K within minutes. If I add total adobe resources being used, it is higher than the 1,500,000K mark. This includes their multiple instances of CF helper, Creative cloud.
I also never saw the "Photoshop-node.exe *32" process running before until last night, taking up 40K, (Evented I/O for v8 Javascript)
Please help, thanks!

Have tested further. These r the things I noticed.
1. Photoshop fails to initiate error message shows just for a few seconds
then starts normally. This usually happens when I try to open a file
without having photoshop open.
2. Trying sone random actions leads to further photoshop errors, crashing
or failing to perform task requested or locking up.
3. On one file in particular, while trying to save it failed then managed
to save it and got error message with photoshop relaunch request. The
problem starts here. I relaunch photoshop to avoid file open issues. Open
the file it crashed in and get the annoying beeps almost like the file or
elements on the file are corrupt. Qhile file is open, I get the beeps. I
rebuild the file using a new file. I finallu get to the grouped vector
paths and upon attempting to drag, I get the beeps. I copy the paths over
and now the new file starts beeping as well. I close the old file and
beeping happens less often. I continue on the new file and randomly get the
beeps (sometimes 2 sometimes more beeps)... I delete tje grouped vector
paths and since have not had the problem. It seems to have been path
related. I read in other posts how path properties are an issue atm and
have not been fixed, this may just be a continuance of that problem.
Cheers

No sound from Apogee Jam with iPad mini and Lightning-30 pin adapter

Hello everybody.
I'm trying to use my Apogee Jam with iPad mini but I am unable to hear any sound from it. Jam seems to work, since the led become green and react to the guitar signal. I tried two different guitars and different cables but nothing changes. Jam also works perfectly on MacBook Pro and garage Band, so I first assumed the issue was in the iPad or in the Lightning-30 pin adapter (genuine).
Oddly on AmpliTube I can tune the guitar, so some signal arrives to the iPad, but I can't do the same on JamUp, where the tuner seems not to reiceve any signal. Are there some settings I should check on the apps?
Thanks for any suggestions!

Make sure you have the monitor input turned on in GarageBand. http://youtu.be/Eb8bN3tExio

Why there's no beep sound alert when charging my iphone5 from totally drained battery?

Why there's no beep sound alert when charging my iphone5 from totally drained battery?

Thanks for your reply. But there's still no beep sound alert when it start to charge?

Bdp-s1500 No sound from Apps apart from Beeps

I've just installed my BDP-S1500.It works fine for DVDs. My TV is a bit temporamental, so I've had to force the the video to output at 720, but now I'm having problems with the sound. Disks are fine, but some apps are buggy. Example. YouTube gives the clinks and beeps as you move and make selections. However, the clips themselves are silent.Netflix is silent. Amazon has sound.Berlin Phil has sound I have tried numerous HDMI cables into numerous numerous HDMI ports, all with the same results.Any ideas?I've updated the firmware and done factory resets.Any ideas? Thanks.

Hello Louise,
Thank you for the details of the issue you are experiencing with sound on your iPad. I recommend the following steps for an issue like this (the steps refer to an iPhone but are also applicable to the iPad):
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the full article here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M.

Power adapter makes constant beep sound

Hi,
I have HP pavillion dv6 and its almost 3 years old. Recently the power adapter makes constant beep sound and the laptop wouldn't get power.
Any idea as why is this happening. Could someone please provide some solution?? Sholud I buy a new one?

Hi P_Bharti,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the power adapter. Have you tried another adapter to see if that gets the notebook powering on. Do you see a light on the power adapter at all? It does sound like the power adapter has failed. If you can provide me with your product number I will be able to tell you your batteries part number.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Beep sound coming from FIOS Box.

Every 15 minutes, I hear beep sound coming from my Fios Box. What is wrong?

if it's the battery back up in your garage or basement, then it's probably time to replace the battery. that normally is an alarm that the battery needs to be replaced. in your TOS when you activate your fios it describes that verizon will take care of the battery for 1 year, and after 1 year you are responsible to replace it.
battery mart on the internet is the cheapest place I have found to replace it. 16 bux plus shipping.
http://www.batterymart.com/p-12v-7ah-sealed-lead-acid-battery.html
http://www.batterymart.com/p-12v-7ah-sealed-lead-acid-battery-f2.html
I don't know if it's an F1 connector or an F2 connector, so on the website they give you a little guide, and you can look at your battery and see which one it has.
if you installed within a year, then call verizon and they should send you a new one at no cost.
there is also an alarm silence button, but I am not sure how long it makes it a silent alarm for. maybe a couple hours, maybe a couple days, someone else on here might be able to answer that.

Verizon Westel 327W abroad - Buzzing sound from the Power Adapter ?

So I moved to Caribbean Islands for schooling and the DSL Modem from local company here was plain 1 port one. The voltage here is 220V, so I have put a transformer and then plugged my Westel 327W into 110V and it works great.
However, I am noticing a buzzing sound from within the power adapter. The adapter is running somewhat hot since I plugged it in a few days ago. Should I be concerned about this buzzing sound or is it just that its sitting on my desktop and I am noticing it now ? Its loud enough to be heard in a completely quite small room....
Thanks

Hi D_U, sorry to hear of your issue, sounds electrical and thereby out of my scope of support.
Constance
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Beeping sound from hp adapter

Similar Messages

Maybe you are looking for