Beeping sounds during iPhone calls when it's not touching my face

Anyone know how to resolve dial tone beeps that occur during phone calls? I am using a headset and it's not touching my face.

Is this with all calls when using a headset or just some?
If some perhaps there's a second call trying to get through & it's notifying you there's another call waiting or if it's a Bluetooth headset maybe it's telling that it requires charging.

Similar Messages

  • Long beeping sounds during iPhone 4s calls

    Often when I am on calls longer than 5 minutes I hear a long beeping sound, almost like someone is pushing a button.  Does anyone why this is happening and how to fix it I have a 4s?

    Is this with all calls when using a headset or just some?
    If some perhaps there's a second call trying to get through & it's notifying you there's another call waiting or if it's a Bluetooth headset maybe it's telling that it requires charging.

  • I have  a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

    I have  a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

    If you were not there, how would you see the led?
    Anyway missed calls will appear on your Lock screen under the Missed tab.
    Or a small red numbered badge will appear on the Phone App icon when you have missed calls. You can then access the Recents Tab in the Phone App to see whcih calls were missed.
    Missed Calls are shown in red there

  • The sound on iPhone 4s when playing videos is terrible?

    I think Apple need to update iOS 6.1.2 to repair this error, because playing is missed bass and treble. Seriously!!!
    the sound on iPhone 4s when playing videos

    ChristySeattle wrote:
    I am now missing 26 songs from my Iphone. (After resynching it told me 26 songs could not be downloaded and to see Itunes for more info, of course Itunes had no info). So now I am missing 26 songs and cant figure out how to get them back. They play through my laptop and my Ipad but I cant even see them on my Iphone anymore. I'm starting to regret my upgrade to the 4s. Help Apple!
    Were these 26 songs purchased directly from the iPhone?  If so, these might be "ghost" entries ... connect your iPhone to iTunes and click on the small arrow to the left of your iPhone's name. Select the iPhone's "Music" category and see if these 26 phantom songs appear grayed out.  If so, that's probably what the message is about. I have the same problem, although for each of my 9 "ghost" songs on my iPhone I have legitimate entries that play just fine.  I can only see these phantom entries on my iPhone when I view its contents through iTunes (and I get the same error message you get).  Unfortunately, I don't have a solution for the error message, but ...
    If these 26 songs really are in your iTunes library, are they set to be sync'd to your iPhone? (assuming that you auto-sync) In other words, are you either syncing your entire library, or at least a playlist (or genre) that you auto-sync to?  If they're not part of your auto-sync categories, then they won't go back onto your iPhone until you designate them to auto-sync to your device.
    If you manually manage music on your iPhone, can you drag and drop these 26 songs to your iPhone?

  • Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

    We have a SOAP to PROXY scenario Which is in Production.
    We keep getting the Error:
    " Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
    We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
    What are all the possible situation where we face such as this issue in Production.

    Please check the SAP note
    # 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
    1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

  • Fax line used for outgoing calls when incomming fax not coming in?

    So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
    I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

    I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
    Let me back up.
    Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
    So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
    Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
    I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
    Is all this possible? Is it only possible in PBX style or is mixed ok?

  • My ipad just starts putting in letters and opening apps when I am not touching it...what's happening????

    My ipad starts typing in random letters and opens apps when I am not touching it..what is happening??

    Try the sandard fixes:
    - Reset. Nothing is lost
    reset iPad. Press and hold both the Sleep/Wake button and the Home
    button for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPad.

  • No sound during a call on iPhone 4S! Help!!!!

    Hi, my iPhone 4s' sound isn't working during a call. I can't hear the person on the other end, nor can I hear them. I can't hear it ringing either, although when I have an incoming call I can hear that ringing then, but nothing else. It started off a couple weeks ago when my microphone was making me sound weird to whoever I was on the phone to. Some would say it sounded like I was under water or in a massive group of people. Long story short, the sound wasn't very good. The same sound came through my speakers so neither one of us could clearly hear each other. Some calls everything would be completely normal and I could hear everything fine but then it would go back to how it was. Obviously now it's completely gone and I'm pretty sure the phone is fairly close to being ready for an upgrade so I'm not really prepared to fork out money on a phone I won't be needing much longer, nonetheless the issue is frustrating and extremely inconvenient considering a phone is made for communication. I've tried a lot of the suggested things to do from other forums and YouTube videos but so far it's been unsuccessful. If there is anyone out there that is a super high tech genius or just someone who knows how to fix my issue id be so grateful!
    Pleaseeeee help me!!!

    Hi Everhodes,
    If you are having multiple audio issues with your iPhone (speaker, receiver, microphone, etc), you may find the troubleshooting steps in the Acoustic-speaker/microphone/receiver section of the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    - Brenden

  • Disturbing sounds during the calls / impossibility to finish the call then

    Dear Apple,
    always when any message comes or alarm is set upetc and I am having a phonecall at this moment, always all these sounds are disturbingme during this call. And the biggest problem is to finish the call then – i cantclick on „Finish“ because of previously incoming notifications shown on thescreen. How to solve this situation? Is there any chance not to be bothered bysounds during the calls?
    Thanks for your help. Pavel

    Flip the ring/silent switch while on a call.

  • High-pitched beep/sound during sleep and shut down modes

    I just wish to check whether is it normal that there's high pitched beep (not very loud but can be heard in a quiet room) which seems to be from the LED or AC Adapter during sleep mode. The beep sounds continuous when the computer has been shut down or in off mode while the main plug of where the ac adapter is connected to is still on. Is this normal? My computer works fine. Battery is charging fine. I just want check whether is this normal. It is has been like that ever since I bought my computer on March 2012.
    HP Pavilion dm4-3005tx Entertainment Notebook PC

    Hello Huanwei,
    It appears that you can hear a "high pitched beep" coming from the notebook while it's in sleep mode or even off, when the power adapter is plugged in and "on". I will try to help you with this.
    Normally, this should not happen. Beeping from a computer may happen during start up a few times to indicate components enabling, but any constant beeping or being while the computer is off shouldn't happen.
    Does this occur, if the AC adapter is not connected to the notebook when it is in sleep mode or off? Do you only notices this, in a specific location? (office, etc.)
    I would suggest, depending on the setup of things. Taking the notebook with no AC to another location in the house. A quiet one, make sure your not near any other electronics (no watches or cell phones either) let the notebook sleep and see if you hear the beeping. If not, then power it off and test again. If no beeping, this is good and the notebook is fine.
    Repeat that same test with the power adapter connected ( again no other electronics around you). Listen while it is "sleeping" and off to see if you can hear the beeping again.
    If you do disconnect the AC from the notebook , but leave that connected to the wall and take the notebook out of that location, go back to see if you can hear beeps again. If you do it could be the AC adapter. If you don't then it could be an issue with that only when it's connected.
    If there was no beeping when the AC was connected in this "testing location", then I would guess it is something else within the house that is beeping (we have seen that before). In which case you'd have nothing to worry about in regard to your notebook.
    Let me know where the above leads.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Crackling noise during iPhone call on Yosemite

    I am using an iPhone 6 with iOS 8.0.2 and an Early 2011 15" MacBook Pro. When I use the iPhone calling with Yosemite feature, it connects, works, but I hear a very loud crackling noise that comes from the computer, starting immediately when the call is placed and continuing for a few seconds after I hang up, no matter what number I dial. Has anyone else experienced the same problem? Might it just be interference? It is so loud that it gets picked up by the microphone and makes having a sustainable call impossible.
    Thanks for your help!

    I found this happening when I was calling with Yosemite through my iPhone 5, but only when I was calling my wife's iPhone 4. When I called my land line, the noise wasn't there. Were you calling an iPhone 4?

  • Face time says I'm already on a FaceTime call when I'm not.

    I have to re-start my computer to start a Facetime call. Otherwise it says I'm already on a Facetime calll when I am not.
    It just started in the last few weeks.
    I'm running a one year old iMac with 10.7.4
    Any ideas?
    Thanks in advance.

    Basics from the User Guide are restart, reset, restore.

  • Sound during phone calls very soft, can't increase volume further. Help!

    Within the past few days I've noticed that I can barely hear someone when I speak on the phone (without the earphone/mic). Speaker function works, but I don't want to use it all the time. The volume is turned up as far as it can go. Anyone else have this problem. When I do try using the earphones/mic, it works fine.

    Have you tried to reboot the iPhone. That is done by holding down the home button and the power off/on button until you see the Apple logo, ignoring the slide to power off screen. Also, no insult intended, I have found that if I don't hold the iPhone to my ear just the right way, I have a difficult time hearing it. It might just be readjusted the position of the phone to you ear. However, if a reboot or repositioning don't work, the last user troubleshooting is a restore, first from a backup and if no help, then as a new phone or not from a backup. You will need to ensure you have everything set in supported applications before you do the restore as a new phone so you can sync all of your content back.

  • Music plays upon ending call when music app not currently being used.

    iPhone 5, with iOS 7.0.4. Randomly, when i hang up from a call, the Music app starts playing the song that I was listening to last. However, sometimes it has been a day or more since i was listening to the song. Very Annoying. What is Apples fix for this??

    Same thing happens on an iPhone 6 running IOS 8.0.2, but only when using Bluetooth headset. Very irritating.

  • LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

    My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
    some times the number 2 keys works automatically any time while working on WORD file or on run command.
     whts the problem,, plz advice.

    Hi abgautam00.
    Welcome to Lenovo Community Forums!
    If your system still boots to windows ok,
        I think it's a stuck key that's causing the beep
    Try Installing this Software test
    http://www.passmark.com/products/keytest.htm
    Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
    Let me know your findings
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for