Beeps on startup... when it manages to startup that is!
My brand new iMac manages to startup only half of the time - I can get it to go only if i disconnect/reconnect the power plug.
Second worry is that it makes a loud beep (just one) one time out of two... I've read that this is a problem with the memory but can that be possible?! It's brand new (bought online from Apple - 2G=2x1G) and also like I said it only beeps every other time I startup...
Any ideas ?
Thanks
iMac (intel) Mac OS X (10.4.7) 17'
The same thing happened to me 2 years ago when my family purchased an emac. About 2 weeks after purchase it started making a loud beep when starting up. If it loaded at all it ran slow and wouldn't let me save anything or empty my trash. I took it to the Apple store in King of Prussia, PA and they told me it was a faulty hardrive. They replaced it and had it ready to go the next business day.
I would def. take it to an apple store obviously if it is brand new you won't have to pay for any repairs.
Imac 20in. Intel Core2Duo 2x1gb. Mac OS X (10.4.7)
20in. Imac Core2Dou 2x1gb Mac OS X (10.4.7)
Similar Messages
-
I bought a DX2300 microtower used. It worked beautifully at the sellers house. We removed the wires/cables and I took it home. When I reassembled everything I got no action on the monitors(dual), no lghts on the wireless keyboard nor mouse. The CPU makes a single, long beeping on startup. The only thing I did to it was clean out the dust from the front vents and fan units. I believe the seller had a 1T byte external harddrive, but other than that, II believe it's all the same. Any suggestions?
This question was solved.
View Solution.I went inside and unplugged and reset each cable I could. It started up smooth and other than the black screen telling me it hadn't been shup down correctly - all works fine. I was able to get my wireless internet set up. All is well in my world. Thank you very much for the help.
-
I got a new HD and new 512MB stick of ram put into my G4. It seemed fine after the HD was installed but a few days later when I bought some second hand ram and slapped it in I got a faint beep on startup. I tried every combination of the ram, but couldn't get rid of the beep untill I unplugged the new HD. So I took it in to the Mac store where I got the HD installed and we couldn't hear the beep!! Took it home and it beeps again, but only when the new HD is plugged in. One strange thing is that the total ram only shows up as 1.19 when it should add up to 1216 MBs; that is two 512's, one 128, and one 64mb stick.
Any ideas?Hi, Mike -
Welcome to Apple's Discussions.
One strange thing is that the total ram only shows up as 1.19 when it should add up to 1216 MBs; that is two 512's, one 128, and one 64mb stick.
1216MB is correct, and 1.19GB is correct. RAM math is a bit odd because it is base2. One GB = 1024MB, not 1000MB. So, 1216MB divided by 1024MB/GB yields 1.19GB.
Is it possible the drive itself is beeping? Some few have been known to do that, but when that happens it usually presages a drive failure - not something expected with a new drive.
Is the drive jumpered correctly? If your Mac is older than a G4 (MDD) model, you should not use Cable Select jumper settings.
There are some beeps at startup which can indicate RAM issues -
http://docs.info.apple.com/article.html?artnum=58442
However, those will replace the normal startup chime. That is, if you hear the normal startup chime and then the beeps, it's not a RAM issue.
At least one person posted a similar issue a few years ago. Careful listening finally traced it to the user's UPS - it was alerting that it was running on battery. -
My niece was using my Emac the other day and she said that all of a sudden it just shut down. When we tried to reboot it, all it does is beep at startup (about 20 times) and then it has the little folder on the screen that alternates between the question mark and a face. When I tried to boot off of the install disk it does boot up, but wont let me re-install the osX. It wont give me the hard drive as a option to install to. I went to the system profiler and it does show that the hard drive is there, but obviously something is wrong. Not really sure what to do and any help would be appreciated.
Welcome to Apple Discussions, bleachfix.
When you boot up from the OS X install disc, select Disk Utility from the utilities menu. What does it have to say about your hard drive? -
KN8 Diamond plus 3 beeps at startup problem
When I connect a Lide 500f scanner I get an extra beep at startup connect a skype phone and I get another extra beep so alltogether PC now beeps 3 times at startup, there are Know problems running PC. Is this a known problem that a new bios ( using 1.20 now) might sort and could it cause a problem long term.
Gigabyte Triton case Gz-xx1ca-sns
LG DVD writer GSA 4167B
LG DVD writer GSA 4163B
2 GB crucial memory DDR PC3200 (2 sticks)
AMD 3500+ (2.2) socket 939 CPU with heat sink / fan
XFX PCI Express Geforce 6600GT 256 VGA card
Zalman VGA cooler ZM80D-HP
MSI K8N Diamond Plus motherboard
Maxtor Sata 250GB Hard drive
Maxtor Ide 160GB Hard drive
Tagan TG480 –U22 power supply
beeps are the ami bios beep codes and come from case speaker 3 beeps should indicate a memory problem as thats not the case I would guess at a bios update curing the problem just find it strange problem is uknown. Bios has been cleared and is 1.20 -
One week ago, my computer (Lenovo ThinkPad T500) has started beeping upon startup (one long, two short) and will not allow the system to start. I have to shut down and restart a considerable amount of times before the display finally shows up. The odd thing is that it has informed me that this indicates a video problem, and yet I have run diagnostics and the such, and there is nothing wrong. Furthermore, my computer runs perfectly, if not even better than before the beeps started.
This problem is starting to get annoying and I'm afraid that I might irreversibly damage my computer if I keep trying to start it up when it is beeping. How can I fix this?
Thanks for all of your help!
Solved!
Go to Solution.katrimc, welcome to the forum
according to the Hardware Maintainance Manual, (pdf p. 52), the beep code means that you possibly have a problem with either your System Board, Display or Memory. I suggest removing and reseating your memory, (pdf p. 78 or look here), and if the problem persists to run memtest86 to check your memory. Let it make at least 3 full passes.
If your memory passes and the symptoms still persist you should call support.
Let the forum know how you get on.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
New Macbook Pro beeping on startup + showing progress bar
Hi;
Yesterday I bought my new 13inch MacBook Pro. When I came to turn it on this morning, it first made a beep sound; then it showed the Apple logo with a progress bar under it. The bar made no progress, suddenly it rebooted again but without making any sound, and the Apple logo re-showed again with the bar. This happeded 3 times before the Mac booted.
Any ideas?
Please help, I am new to Mac, and I'm Lovin' It.
Thank you.
Elias.eliasfromnewyork wrote:
It is true; the past day I had updated my software and I turned it off. This all started happening the next day. I understand that it might be updating the EFI firmware, I remember I did install it; but the problem is that it happened twice in a row (I shut down the computer and re-turned it on again) and the same things happened. But it never happened again. I just wanted to know that my new MB is OK. (I am new to Mac and not familiar with MB beeping at startup, is it normal?).
Thank you.
If the issue got fixed that means that the MacBook was updating its EFI. The "bong" sound is normal at start up, however the "beep" sound will be heard only when the EFI is update or has a problem. -
What does three beeps at startup mean???
It usually means the machine can't detect any RAM. Try reseating the RAM modules (directions are in the users guide that came with the machine).
Power On Self-Test Beep Definition - Part 2 -
I had to do a System Recovery and ever since then, I get 3 short beeps on startup. It does it 4 times... Any ideas?
Hi,
Could be BIOS related..
The link below will tell you what the Beep codes indicate..Follow the instructions as per the the beep codes
Beep and LED code descriptions
BIOS Beep Codes
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed. -
I have been experiencing three loud beeps on startup with my Macbook Pro.
Aftter the beeps, the computer stays on a blank screen until I force a shutdown and restart, sometimes taking 3 tries to get past the beeps. Otherwise, It runs great, never crashes or locks up.
I tried reseating the RAM (2-1 gig dimms) after someone told me they thought that the distinctive 3-beep warning was a "bad ram" message. That did not make a difference.
Does anyone know what this may mean?
Thanks,
Dave Kowalski
[email protected]2nd that - first check the ram is firmly seated - sometimes it's not all the way in the slots..
Take a look here;
http://docs.info.apple.com/article.html?artnum=58442
Best of luck. -
Computer keeps beeping on startup
my macbook pro beeps three times on start up what does that mean
Usually defective memory.
Intel-based Mac Power On Self Test RAM error beeps
Power On Self-Test Beep Definition - Part 2
Mac computers- About startup tones -
ClassNotFoundException When Starting Managed Server with NodeManager
Hi Experts,
ENV:
Weblogic Server 10.3.3
Webcenter 11.1.1.3
My managed server can be brought up correctly by stopManagedWebLogic.sh <ManagedServerName>. But when trying to start them up, app on that server can not run correctly, and node manager log complained that below classes are not found:
oracle.jrf.wls.JRFStartup
oracle.security.jps.wls.JpsWlsStartupClass
oracle.core.ojdl.weblogic.ODLConfiguration
oracle.jrf.AppContextStartup
oracle.ias.cache.Startup
oracle.dms.wls.DMSStartup
My Nodemanager is setup following instructions in OBE.Administering Managed Servers by Using the Node Manager(http://www.oracle.com/technology/obe/fusion_middleware/wls103/installconfig/admin_mngd_srvr/admin_ms_using_nm.htm#t4). Output javaclaspath of setWLSEnv.sh has been copy&pasted to admin console->server->..->Server start->classpath
Thanks,
ToddTrying setting the property StartScriptEnabled=true instead of false.
You can change this in the nodemanager.properties file (usually located in the directory <middleware-home>/wlserver_10.3/common/nodemanager)
The classes are set in the startscripts, such as setDomainEnv, which is called by startWebLogic.
The latter script is set by default in the nodemanager.properties file, through the property StartScriptName=startWebLogic.cmd. -
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac11,1
1 2.66 GHz Intel Core i5 CPU: 4 cores
16 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
HDDFanControlDaemon: Path: /Library/StartupItems/HDDFanControlDaemon
HP IO: Path: /Library/StartupItems/HP IO
System Software:
OS X 10.9 (13A603) - Uptime: 15 days 6:58:4
Disk Information:
WDC WD2003FZEX-00Z4SA0 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 2 TB (1.09 TB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H disk4 : (1.4 GB)
disk4s1 (disk4s1) <not mounted>: 18 KB
ScanSnap (disk4s2) /Volumes/ScanSnap 1: 943.7 MB (70.5 MB free)
USB Information:
Fujitsu ScanSnap S1500
Elgato EyeTV HD
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Fitbit Inc. Fitbit Base Station
Mitsumi Electric Hub in Apple Extended USB Keyboard
Mitsumi Electric Apple Extended USB Keyboard
SanDisk Firebird USB Flash Drive 16.01 GB
POPPI 80TH (disk1s1) /Volumes/POPPI 80TH: 16.01 GB (13.03 GB free)
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.carbonite.launchd.carbonitedaemon.plist
[loaded] com.elgato.EyeConnect.plist
[loaded] com.fitbit.galileod.plist
[not loaded] com.logmein.logmeinblanker.plist
[loaded] com.logmein.logmeinserver.plist
[not loaded] com.logmein.raupdate.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.carbonite.launchd.carbonitealerts.plist
[loaded] com.carbonite.launchd.carbonitestatus.plist
[loaded] com.hp.help.tocgenerator.plist
[failed] com.logmein.LMILaunchAgentFixer.plist
[loaded] com.logmein.logmeingui.plist
[loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[failed] com.apple.SafariBookmarksSyncer.plist
[loaded] com.google.keystone.agent.plist
User Login Items:
HDD Fan Control Monitor
Fitbit Connect Menubar Helper
Dropbox
EyeTV Helper
ScanSnap Manager
3rd Party Preference Panes:
Carbonite
Flash Player
Flip4Mac WMV
HDD Fan Control
MacFUSE
Internet Plug-ins::
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2
AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
LogMeIn: Version: 1.0.961 - SDK 10.7
Silverlight: Version: 5.1.10411.0 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
LogMeInSafari32: Version: 1.0.961 - SDK 10.7
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6
AdobePDFViewer: Version: 11.0.02 - SDK 10.6
GarminGpsControl: Version: 4.0.1.0 Release - SDK 10.6
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Move-Media-Player: Version: npmnqmp 071102000006
WebEx: Version: 1.0
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105
Google Earth Web Plug-in: Version: 7.1
RealPlayer Plugin: Version: (null)
Bad Fonts:
None
Old applications:
FirmwareUpdateTool: Version: 2.2 - SDK 10.0
/Applications/FirmwareUpdateTool.app
Garmin WebUpdater: Version: 2.1.3 - SDK 10.4
/Applications/Garmin WebUpdater.app
Image Data Converter Ver: Version: 4.1.00.06060 - SDK 10.5
/Applications/Image Data Converter/Image Data Converter Ver.4.app
Install Spotify-1: Version: 1.0 - SDK 10.5
/Users/tmoore/Downloads/Install Spotify-1.app
Microsoft Alerts Daemon: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Office Setup Assistant: Version: 14.3.1 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Setup Assistant.app
Microsoft Outlook: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Numbers: Version: 2.3 - SDK 10.5
/Applications/iWork '09/Numbers.app
Open XML for Excel: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Pages: Version: 4.3 - SDK 10.5
/Applications/iWork '09/Pages.app
Proxify: Version: 1.0.8.0 - SDK 10.5
/Applications/Proxify.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Scan to Dropbox: Version: 3.2.63 - SDK 10.4
/Applications/ScanSnap/Scan to Office/Scan to Dropbox.app
Scan to Salesforce Chatter: Version: 3.2.60 - SDK 10.4
/Applications/ScanSnap/Scan to Office/Scan To Salesforce.app
Scan to SugarSync: Version: 3.2.63 - SDK 10.4
/Applications/ScanSnap/Scan to Office/Scan to SugarSync.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SyncServicesAgent: Version: 14.3.8 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
TurboTax Premier 2011: Version: 2011.r17.007 - SDK 10.4
/Applications/TurboTax Premier 2011.app
Time Machine:
Skip System Files: YES
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 Disk used: 844.02 GB
Destinations:
Data [Network] (Last used)
Total size: 3
Total number of backups: 30
Oldest backup: 2013-12-04 15:58:45 +0000
Last backup: 2013-12-21 02:39:51 +0000
Size of backup disk: Adequate
Backup size 3 > (Disk used 844.02 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
10% CarboniteDaemon
4% WindowServer
2% EtreCheck
1% Safari
1% Fitbit Connect Menubar Helper
Top Processes by Memory:
295 MB Mail
279 MB iTunes
262 MB CarboniteDaemon
229 MB com.apple.IconServicesAgent
213 MB mds_stores
Virtual Memory Statistics:
4.66 GB Free RAM
6.49 GB Active RAM
3.58 GB Inactive RAM
1.27 GB Wired RAM
6.97 GB Page-ins
0 B Page-outsSeveral problems exist.
1.
Back up your Mac prior to making any changes to its file system. Time Machine has not been configured properly To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support.
2.
You inadvertently installed adware. You do not need to download or install anything to fix it.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.
3.
That Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file -
ECM - roll up functionality in ECM when a manager left the company
Hi Experts,
When a Manager B reports to Manager A. Manager B leaves the company and has 5 employees reporting to him; his position is now vacant in SAP. Should Manager A now see the 5 employees that reported to Manager B in Manager Au2019s list of direct reports in the initial planning screens? I meant automatically roll up to the one-up manager.
Currently, this is not happening in my system, the manger A need to go search from the Org Unit dropdown to find manager Bu2019s employees. Is there a configuration setting for this?
Thanks!
SusanHi Susan,
The recently released EhP4 constitutes "Multilevel Approval Process" centered upon the organizational structure of the enterprise, rather than the employees assigned to the units within it. Because the Multilevel Approval Process is based on the organizational structure, it is designed with the intent of simplifying, for each successively higher-level manager within that structure, the administration and execution of the entire compensation planning cycle.
Within the Multilevel Approval Process, the planning manager of an organizational unit is understood to be the manager who is responsible for submitting compensation planning data for employees of that unit who are not managers themselves.
Under normal circumstances, the planning manager of an organizational unit is synonymous with the manager of that unit u2013 provided that a corresponding user is assigned to that manager in the system. However, if an organizational unit has no manager, or if the manager of that organizational unit has no user in the system, then the next higher-level manager who has a user in the system becomes the planning manager for that organizational unit.
This is a completely new functionality. I don't think we have any option uptil EhP4.
Cheers,
DF -
I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?
Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W. -
Update manager in IdM automatically when the manager changes in SAP HR
Hi Experts
I have been given a requirement where the manager of a user in IdM should be updated automatically when the manager changes in SAP HR.
The HR extraction job is currently in place and runs every 30mins.
Please could you give me some ideas on how to implement this.
IDM 7.2 SP 6
Thanks
RanHi Deepak
I have been discussing this a bit more in detail with the client. So, the issue is as follows
When a new/replacement manager is hired
When people are moved from one org unit to another
The scheduled extraction job (RPLDAP_EXTRACT_IDM with a variant with the delta tick on) does not update the new manager info in IDM for the relevant users who report to that manager. The client has to run the program (RPLDAP_EXTRACT_IDM with a variant with the delta tick off) manually each time for the affected users which updates the manager info successfully in idm.
I investigated the query LDAP_IDM_QUERY from user group /SAPQUERY/L1 and want to know if the below should be ticked as well. Your thoughts please?
Please advise.
Thanks
Ranjit
Maybe you are looking for
-
How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks
-
Firefox stops responding. I need to exit and restart or reboot the computer.
I do not get an error message - the application simply hangs up during the opening sequence or stops responding when open. Also, some links within web sites do not work. Example: The embedded print command for Google Maps does not work, however, the
-
How to start video chat with another mac
i tried to start a video chat with my daughter living in another province. what do we have to do to start the video chat?
-
Need help with creating B*Tree XMLIndex on a structured object-relational xmltype column
The following is my schema: CREATE TABLE TST_AUDIT_TBL NOTE VARCHAR2(25 CHAR) null, CHANGE_HISTORY XMLTYPE not null, CHANGE_HISTORY_EXT XMLTYPE null XMLTYPE COLUMN CHANGE_HISTORY STO
-
"Invalid Variant Operation" when AVDoc.GetPDDoc
Hi, I create pdf object by ole in delphi. ===================== try AcroApp := CreateActiveXObject('AcroExch.App'); AcroApp.Hide; except Exit; end; AcroAVDoc := CreateActiveXObject('AcroExch.AVDoc');